diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2022-01-03 14:47:37 +0200 |
---|---|---|
committer | Priyanka Jain <priyanka.jain@nxp.com> | 2022-02-01 15:08:07 +0530 |
commit | 681adaa466cd4a412b5c8679693590f3ee6b2ee5 (patch) | |
tree | 06f7ce035ca1669c4d1e6f244347f994692af92a /arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | |
parent | bee9fd2957d7cc8e86ba273e6f2fee5e0ec79dd2 (diff) | |
download | u-boot-681adaa466cd4a412b5c8679693590f3ee6b2ee5.tar.gz |
arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports
The commit in the Fixes: tag below broke traffic through switch ports
where the SERDES protocol requires in-band autoneg and this requirement
isn't described in the device tree: SGMII, QSGMII, USXGMII (with
2500Base-X, in-band autoneg isn't supported).
The LS1028A-QDS boards are not yet ready for syncing their device trees
with Linux, since Ethernet is missing there (but has been submitted):
https://lore.kernel.org/lkml/20211112223457.10599-11-leoyang.li@nxp.com/
When agreement is reached for the Ethernet support in Linux, there will
be a sync for these boards as well. For now, just enable in-band autoneg
to fix the breakage.
Fixes: e3789a726269 ("net: dsa: felix: configure the in-band autoneg property based on OF node info")
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi')
-rw-r--r-- | arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi index 6f1f6cb32a..b652206920 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -23,24 +23,28 @@ &mscc_felix_port0 { status = "okay"; + managed = "in-band-status"; phy-mode = "qsgmii"; phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; }; &mscc_felix_port1 { status = "okay"; + managed = "in-band-status"; phy-mode = "qsgmii"; phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; }; &mscc_felix_port2 { status = "okay"; + managed = "in-band-status"; phy-mode = "qsgmii"; phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; }; &mscc_felix_port3 { status = "okay"; + managed = "in-band-status"; phy-mode = "qsgmii"; phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; }; |