diff options
| author | Kuldeep Singh <kuldeep.singh@nxp.com> | 2019-11-21 17:15:17 +0530 |
|---|---|---|
| committer | Priyanka Jain <priyanka.jain@nxp.com> | 2019-12-26 16:00:20 +0530 |
| commit | ce3bead6089b9f2356d3c89d289912c34714071d (patch) | |
| tree | 12bb82b89bb52294da0e5ed89ddbb52e16c7badc /arch/arm/cpu | |
| parent | 0b6c3706abe90bc52d6ef7de6920f83047378ade (diff) | |
| download | u-boot-ce3bead6089b9f2356d3c89d289912c34714071d.tar.gz | |
fsl-lsch3: soc: Enable AHB read support for Flexspi controller
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/soc.c | 44 |
2 files changed, 53 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 0de840aaa2..ab1e3fbed6 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -397,6 +397,15 @@ config QSPI_AHB_INIT But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB bus for those flashes to support the full QSPI flash size. +config FSPI_AHB_EN_4BYTE + bool "Enable 4-byte Fast Read command for AHB mode" + default n + help + The default setting for FlexSPI AHB bus just supports 3-byte addressing. + But some FlexSPI flash sizes are up to 64MBytes. + This flag enables fast read command for AHB mode and modifies required + LUT to support full FlexSPI flash. + config SYS_CCI400_OFFSET hex "Offset for CCI400 base" depends on SYS_FSL_HAS_CCI400 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 4b193c6091..578f8d12de 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -686,6 +686,47 @@ void fsl_lsch2_early_init_f(void) } #endif +#ifdef CONFIG_FSPI_AHB_EN_4BYTE +int fspi_ahb_init(void) +{ + /* Enable 4bytes address support and fast read */ + u32 *fspi_lut, lut_key, *fspi_key; + + fspi_key = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUTKEY_BASE_ADDR; + fspi_lut = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUT_BASE_ADDR; + + lut_key = in_be32(fspi_key); + + if (lut_key == SYS_NXP_FSPI_LUTKEY) { + /* That means the register is BE */ + out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY); + /* Unlock the lut table */ + out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK); + /* Create READ LUT */ + out_be32(fspi_lut, 0x0820040c); + out_be32(fspi_lut + 1, 0x24003008); + out_be32(fspi_lut + 2, 0x00000000); + /* Lock the lut table */ + out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY); + out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK); + } else { + /* That means the register is LE */ + out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY); + /* Unlock the lut table */ + out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK); + /* Create READ LUT */ + out_le32(fspi_lut, 0x0820040c); + out_le32(fspi_lut + 1, 0x24003008); + out_le32(fspi_lut + 2, 0x00000000); + /* Lock the lut table */ + out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY); + out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK); + } + + return 0; +} +#endif + #ifdef CONFIG_QSPI_AHB_INIT /* Enable 4bytes address support and fast read */ int qspi_ahb_init(void) @@ -878,6 +919,9 @@ int board_late_init(void) #ifdef CONFIG_QSPI_AHB_INIT qspi_ahb_init(); #endif +#ifdef CONFIG_FSPI_AHB_EN_4BYTE + fspi_ahb_init(); +#endif return fsl_board_late_init(); } |