diff options
| author | Chris Morgan <macromorgan@hotmail.com> | 2021-08-05 16:27:52 +0800 |
|---|---|---|
| committer | Kever Yang <kever.yang@rock-chips.com> | 2021-08-12 09:34:11 +0800 |
| commit | d70c0cab8f8bb8607f574e0e346d14cea1729903 (patch) | |
| tree | cb4d1be4f6eed6c13a4fa0464a7f29c5973eeca2 | |
| parent | 674a9483096148999818f336ddd2755172bfee0c (diff) | |
| download | u-boot-d70c0cab8f8bb8607f574e0e346d14cea1729903.tar.gz | |
rockchip: px30: add support for SFC for Odroid Go Advance
The Odroid Go Advance uses a Rockchip Serial Flash Controller with an
XT25F128B SPI NOR flash chip. This adds support for both. Note that
while both the controller and chip support quad mode, only two lines
are connected to the chip. Changing the pinctrl to bus2 and setting tx
and rx lines to 2 for this reason.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| -rw-r--r-- | arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 17 | ||||
| -rw-r--r-- | arch/arm/dts/rk3326-odroid-go2.dts | 16 |
2 files changed, 33 insertions, 0 deletions
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi index 00767d2abd..741e8dd935 100644 --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -7,6 +7,15 @@ chosen { u-boot,spl-boot-order = &sdmmc; }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdmmc; + serial1 = &uart1; + serial2 = &uart2; + spi0 = &sfc; + }; }; &cru { @@ -57,6 +66,14 @@ u-boot,spl-fifo-mode; }; +&sfc { + u-boot,dm-pre-reloc; +}; + +&spi_flash { + u-boot,dm-pre-reloc; +}; + &uart1 { clock-frequency = <24000000>; u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts index 8cd4688c49..6f91f5040b 100644 --- a/arch/arm/dts/rk3326-odroid-go2.dts +++ b/arch/arm/dts/rk3326-odroid-go2.dts @@ -617,6 +617,22 @@ status = "okay"; }; +&sfc { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>; + status = "okay"; + + spi_flash: xt25f128b@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + &tsadc { status = "okay"; }; |