Standardize mem_malloc_init() implementation

This lays the groundwork to allow architectures to share a common
mem_malloc_init().

Note that the x86 implementation was not modified as it did not fit the
mold of all other architectures.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

11 files changed, 79 insertions, 88 deletions

diff --git a/lib_arm/board.c b/lib_arm/board.c
index 62b7874437..904ea89c2d 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -83,14 +83,13 @@ extern void rtl8019_get_enetaddr (uchar * addr);
 #endif
 
 static
-void mem_malloc_init (ulong dest_addr)
+void mem_malloc_init (ulong start, ulong size)
 {
-	mem_malloc_start = dest_addr;
-	mem_malloc_end = dest_addr + CONFIG_SYS_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	memset ((void *) mem_malloc_start, 0,
-			mem_malloc_end - mem_malloc_start);
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 
@@ -300,7 +299,8 @@ void start_armboot (void)
 	}
 
 	/* armboot_start is defined in the board-specific linker script */
-	mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
+	mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN,
+			CONFIG_SYS_MALLOC_LEN);
 
 #ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 03a520cddc..ca1bd6fd32 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -50,20 +50,16 @@ int board_postclk_init(void) __attribute__((weak, alias("__do_nothing")));
 int board_early_init_r(void) __attribute__((weak, alias("__do_nothing")));
 
 /* The malloc area is right below the monitor image in RAM */
-static void mem_malloc_init(void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	unsigned long monitor_addr;
-
-	monitor_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
-	mem_malloc_end = monitor_addr;
-	mem_malloc_start = mem_malloc_end - CONFIG_SYS_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
 	printf("malloc: Using memory from 0x%08lx to 0x%08lx\n",
 	       mem_malloc_start, mem_malloc_end);
 
-	memset ((void *)mem_malloc_start, 0,
-		mem_malloc_end - mem_malloc_start);
+	memset((void *)mem_malloc_start, 0, size);
 }
 
 #ifdef CONFIG_SYS_DMA_ALLOC_LEN
@@ -312,7 +308,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 #endif
 
 	timer_init();
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
+			CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
 	malloc_bin_reloc();
 	dma_alloc_init();
 
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 9c405ba4bd..17681f6f8e 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -44,13 +44,13 @@ static inline void serial_early_puts(const char *s)
 #endif
 }
 
-static void mem_malloc_init(void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	mem_malloc_start = (ulong)CONFIG_SYS_MALLOC_BASE;
-	mem_malloc_end = (ulong)(CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
-	mem_malloc_brk = mem_malloc_start;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	memset((void*)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
+	memset((void*)mem_malloc_start, 0, size);
 }
 
 static int display_banner(void)
@@ -311,7 +311,7 @@ void board_init_r(gd_t * id, ulong dest_addr)
 #endif
 
 	/* initialize malloc() area */
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 	malloc_bin_reloc();
 
 #if	!defined(CONFIG_SYS_NO_FLASH)
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 4392bccdba..cbc6b50258 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -109,17 +109,13 @@ ulong monitor_flash_len;
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
  */
-static void mem_malloc_init (void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	mem_malloc_end = dest_addr;
-	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
-
-	memset ((void *) mem_malloc_start,
-		0,
-		mem_malloc_end - mem_malloc_start);
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 /*
@@ -499,7 +495,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	trap_init (CONFIG_SYS_SDRAM_BASE);
 
 	/* initialize malloc() area */
-	mem_malloc_init ();
+	mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
+			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
 	malloc_bin_reloc ();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index fc25a75305..a5d924a1f3 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -51,12 +51,13 @@ extern int getenv_IPaddr (char *);
  * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
  * as our monitory code is run from SDRAM
  */
-static void mem_malloc_init (void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	mem_malloc_end = (CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
-	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
-	mem_malloc_brk = mem_malloc_start;
-	memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
+
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 /*
@@ -104,7 +105,7 @@ void board_init (void)
 	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
 
 	/* Initialise malloc() area */
-	mem_malloc_init ();
+	mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
 		WATCHDOG_RESET ();
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 68a3697f74..b233a6c8a9 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -77,17 +77,13 @@ int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f"))
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
  */
-static void mem_malloc_init (void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	mem_malloc_end = dest_addr;
-	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
-
-	memset ((void *) mem_malloc_start,
-		0,
-		mem_malloc_end - mem_malloc_start);
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 
@@ -352,7 +348,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	bd = gd->bd;
 
 	/* initialize malloc() area */
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
+			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
 	malloc_bin_reloc();
 
 #ifndef CONFIG_SYS_NO_FLASH
diff --git a/lib_nios/board.c b/lib_nios/board.c
index 30cdb477cf..745e0a4d98 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -55,14 +55,13 @@ typedef int (init_fnc_t) (void);
 /*
  * The Malloc area is immediately below the monitor copy in RAM
  */
-static void mem_malloc_init (void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
-	mem_malloc_end = mem_malloc_start + CONFIG_SYS_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
-	memset ((void *) mem_malloc_start,
-		0,
-		mem_malloc_end - mem_malloc_start);
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
+
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 
@@ -125,7 +124,7 @@ void board_init (void)
 	}
 
 	WATCHDOG_RESET ();
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 	malloc_bin_reloc();
 
 	WATCHDOG_RESET ();
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index e5a8d54069..2c470dd9f4 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -60,12 +60,11 @@ typedef int (init_fnc_t) (void);
  */
 static void mem_malloc_init (void)
 {
-	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
-	mem_malloc_end = mem_malloc_start + CONFIG_SYS_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
-	memset ((void *) mem_malloc_start,
-		0,
-		mem_malloc_end - mem_malloc_start);
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start
+
+	memset((void *)mem_malloc_start, 0, size);
 }
 
 
@@ -131,7 +130,7 @@ void board_init (void)
 	}
 
 	WATCHDOG_RESET ();
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 	malloc_bin_reloc();
 
 	WATCHDOG_RESET ();
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index f0cc3ce8d8..6cf7730095 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -144,17 +144,13 @@ ulong monitor_flash_len;
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
  */
-static void mem_malloc_init (void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	mem_malloc_end = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
-#endif
-	mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
-	mem_malloc_brk = mem_malloc_start;
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	memset ((void *) mem_malloc_start,
-		0,
-		mem_malloc_end - mem_malloc_start);
+	memset ((void *)mem_malloc_start, 0, size);
 }
 
 /*
@@ -650,6 +646,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #ifndef CONFIG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
+	ulong malloc_start;
 
 #ifndef CONFIG_SYS_NO_FLASH
 	ulong flash_size;
@@ -662,9 +659,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_RELOC_FIXUP_WORKS)
 	gd->reloc_off = 0;
-	mem_malloc_end = dest_addr;
+	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
 #else
 	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+	malloc_start = CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
+			TOTAL_MALLOC_LEN;
 #endif
 
 #ifdef CONFIG_SERIAL_MULTI
@@ -760,7 +759,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	asm ("sync ; isync");
 
 	/* initialize malloc() area */
-	mem_malloc_init ();
+	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
 	malloc_bin_reloc ();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
diff --git a/lib_sh/board.c b/lib_sh/board.c
index 001e89c714..2691316046 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -38,14 +38,13 @@ const char version_string[] = U_BOOT_VERSION" ("U_BOOT_DATE" - "U_BOOT_TIME")";
 
 unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
 
-static void mem_malloc_init(void)
+static void mem_malloc_init(ulong start, ulong size)
 {
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start;
 
-	mem_malloc_start = (TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN);
-	mem_malloc_end = (mem_malloc_start + CONFIG_SYS_MALLOC_LEN - 16);
-	mem_malloc_brk = mem_malloc_start;
-	memset((void *) mem_malloc_start, 0,
-		(mem_malloc_end - mem_malloc_start));
+	memset((void *)mem_malloc_start, 0, size);
 }
 
 static int sh_flash_init(void)
@@ -96,7 +95,8 @@ static int sh_pci_init(void)
 
 static int sh_mem_env_init(void)
 {
-	mem_malloc_init();
+	mem_malloc_init(TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
+			CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16);
 	malloc_bin_reloc();
 	env_relocate();
 	jumptable_init();
diff --git a/lib_sparc/board.c b/lib_sparc/board.c
index 37b7c0a594..e69431f8b8 100644
--- a/lib_sparc/board.c
+++ b/lib_sparc/board.c
@@ -82,12 +82,13 @@ ulong monitor_flash_len;
 /*
  * The Malloc area is immediately below the monitor copy in RAM
  */
-static void mem_malloc_init(void)
+static void mem_malloc_init(ulong start, ulong size)
 {
-	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
-	mem_malloc_end = CONFIG_SYS_MALLOC_END;
-	mem_malloc_brk = mem_malloc_start;
-	memset((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
+	mem_malloc_start = start;
+	mem_malloc_end = start + size;
+	mem_malloc_brk = start
+
+	memset((void *)mem_malloc_start, 0, size);
 }
 
 /***********************************************************************/
@@ -313,7 +314,8 @@ void board_init_f(ulong bootflag)
 	interrupt_init();
 
 	/* initialize malloc() area */
-	mem_malloc_init();
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE,
+			CONFIG_SYS_MALLOC_END - CONFIG_SYS_MALLOC_BASE);
 	malloc_bin_reloc();
 
 #if !defined(CONFIG_SYS_NO_FLASH)