ebony: Drop

This board has not compiled for me for quite some time due to size
constraints, remove.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

11 files changed, 1 insertions, 707 deletions

diff --git a/board/amcc/ebony/Kconfig b/board/amcc/ebony/Kconfig
deleted file mode 100644
index ba73148f7f..0000000000
--- a/board/amcc/ebony/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if TARGET_EBONY
-
-config SYS_BOARD
-	default "ebony"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "ebony"
-
-config DISPLAY_BOARDINFO
-	bool
-	default y
-
-endif
diff --git a/board/amcc/ebony/MAINTAINERS b/board/amcc/ebony/MAINTAINERS
deleted file mode 100644
index bc62851509..0000000000
--- a/board/amcc/ebony/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-EBONY BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/ebony/
-F:	include/configs/ebony.h
-F:	configs/ebony_defconfig
diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile
deleted file mode 100644
index 5876486f58..0000000000
--- a/board/amcc/ebony/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= ebony.o flash.o
-extra-y	+= init.o
diff --git a/board/amcc/ebony/README b/board/amcc/ebony/README
deleted file mode 100644
index 4df00b3561..0000000000
--- a/board/amcc/ebony/README
+++ /dev/null
@@ -1,136 +0,0 @@
-			   AMCC Ebony Board
-
-		    Last Update: September 12, 2002
-=======================================================================
-
-This file contains some handy info regarding U-Boot and the AMCC
-Ebony evaluation board. See the README.ppc440 for additional
-information.
-
-
-SWITCH SETTINGS & JUMPERS
-==========================
-
-Here's what I've been using successfully. If you feel inclined to
-change things ... please read the docs!
-
-DIPSW   U46         U80
-------------------------
-SW 1    off         on
-SW 2    on          on
-SW 3    on          on
-SW 4    off         on
-SW 5    on          off
-SW 6    on          on
-SW 7    on          off
-SW 8    on          off
-
-J41: strapped
-J42: open
-
-All others are factory default.
-
-
-I2C probe
-=====================
-
-The i2c utilities have been tested on both Rev B. and Rev C. and
-look good. The CONFIG_SYS_I2C_NOPROBES macro is defined to prevent
-probing the CDCV850 clock controller at address 0x69 (since reading
-it causes the i2c implementation to misbehave. The output of
-'i2c probe' should look like this (assuming you are only using a single
-SO-DIMM:
-
-=> i2c probe
-Valid chip addresses: 50 53 54
-Excluded chip addresses: 69
-
-
-GETTING OUT OF I2C TROUBLE
-===========================
-
-If you're like me ... you may have screwed up your bootstrap serial
-eeprom ... or worse, your SPD eeprom when experimenting with the
-i2c commands. If so, here are some ideas on how to get out of
-trouble:
-
-Serial bootstrap eeprom corruption:
------------------------------------
-Power down the board and set the following straps:
-
-J41 - open
-J42 - strapped
-
-This will select the default sys0 and sys1 settings (the serial
-eeproms are not used). Then power up the board and fix the serial
-eeprom using the 'i2c mm' command. Here are the values I currently
-use:
-
-=> i2c md 50 0 10
-0000: bf a2 04 01 ae 94 11 00 00 00 00 00 00 00 00 00    ................
-
-=> i2c md 54 0 10
-0000: 8f b3 24 01 4d 14 11 00 00 00 00 00 00 00 00 00    ..$.M...........
-
-Once you have the eeproms set correctly change the
-J41/J42 straps as you desire.
-
-SPD eeprom corruption:
-------------------------
-I've corrupted the SPD eeprom several times ... perhaps too much coffee
-and not enough presence of mind ;-). By default, the ebony code uses
-the SPD to initialize the DDR SDRAM control registers. So if the SPD
-eeprom is corrupted, U-Boot will never get into ram. Here's how I got
-out of this situation:
-
-0. First, _before_ playing with the i2c utilities, do an 'i2c probe', then
-use 'i2c md' to capture the various device contents to a file. Some day
-you may be glad you did this ... trust me :-). Otherwise try the
-following:
-
-1. In the include/configs/EBONY.h file find the line that defines
-the CONFIG_SPD_EEPROM macro and undefine it. E.g:
-
-#undef CONFIG_SPD_EEPROM
-
-This will make the code use default SDRAM control register
-settings without using the SPD eeprom.
-
-2. Rebuild U-Boot
-
-3. Load the new U-Boot image and reboot ebony.
-
-4. Repair the SPD eeprom using the 'i2c mm' command. Here's the eeprom
-contents that work with the default SO-DIMM that comes with the
-ebony board (micron 8VDDT164AG-265A1). Note: these are probably
-_not_ the factory settings ... but they work.
-
-=> i2c md 53 0 10 80
-0000: 80 08 07 0c 0a 01 40 00 04 75 75 00 80 08 00 01    ......@..uu.....
-0010: 0e 04 0c 01 02 20 00 a0 75 00 00 50 3c 50 2d 20    ..... ..u..P<P-
-0020: 90 90 50 50 00 00 00 00 00 41 4b 34 32 75 00 00    ..PP.....AK42u..
-0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9c    ................
-0040: 2c 00 00 00 00 00 00 00 08 38 56 44 44 54 31 36    ,........8VDDT16
-0050: 36 34 41 47 2d 32 36 35 41 31 20 01 00 01 2c 63    64AG-265A1 ...,c
-0060: 22 25 ab 00 00 00 00 00 00 00 00 00 00 00 00 00    "%..............
-0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
-
-
-PCI DOUBLE-ENUMERATION WOES
-===========================
-
-If you're not using PCI-X cards and are simply using 32-bit and/or
-33 MHz cards via extenders and the like, you may notice that the
-initial pci scan reports various devices twice ... and configuration
-does not succeed (one or more devices are enumerated twice). To correct
-this we replaced the 2K ohm resistor on the IDSEL line(s) with a
-22 ohm resistor and the problem went away. This change hasn't broken
-anything yet -- use at your own risk.
-
-We never tested anything other than 33 MHz/32-bit cards. If you have
-the chance to do this, please let me know how things turn out :-)
-
-
-Regards,
---Scott
-<smcnutt@artesyncp.com>
diff --git a/board/amcc/ebony/config.mk b/board/amcc/ebony/config.mk
deleted file mode 100644
index f18b09710d..0000000000
--- a/board/amcc/ebony/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
deleted file mode 100644
index eb424489ef..0000000000
--- a/board/amcc/ebony/ebony.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-#define BOOT_SMALL_FLASH	32	/* 00100000 */
-#define FLASH_ONBD_N		2	/* 00000010 */
-#define FLASH_SRAM_SEL		1	/* 00000001 */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-long int fixed_sdram(void);
-
-int board_early_init_f(void)
-{
-	uint reg;
-	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
-	unsigned char status;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(EBC0_CFGADDR, EBC0_CFG);
-	reg = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
-
-	mtebc(PB1AP, 0x02815480);	/* NVRAM/RTC */
-	mtebc(PB1CR, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
-	mtebc(PB7AP, 0x01015280);	/* FPGA registers */
-	mtebc(PB7CR, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
-
-	/* read FPGA_REG0  and set the bus controller */
-	status = *fpga_base;
-	if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
-		mtebc(PB0AP, 0x9b015480);	/* FLASH/SRAM */
-		mtebc(PB0CR, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
-		mtebc(PB2AP, 0x9b015480);	/* 4MB FLASH */
-		mtebc(PB2CR, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
-	} else {
-		mtebc(PB0AP, 0x9b015480);	/* 4MB FLASH */
-		mtebc(PB0CR, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
-
-		/* set CS2 if FLASH_ONBD_N == 0 */
-		if (!(status & FLASH_ONBD_N)) {
-			mtebc(PB2AP, 0x9b015480);	/* FLASH/SRAM */
-			mtebc(PB2CR, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
-		}
-	}
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000009);	/* SMI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x01c00008);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-phys_size_t initdram(int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-	return dram_size;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- *
- *  Assumes:    128 MB, non-ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram(void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(SDRAM0_UABBA, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(SDRAM0_SLIO, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(SDRAM0_DEVOPT, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(SDRAM0_WDDCTR, 0x00000000);	/* wrcp=0 dcd=0                 */
-	mtsdram(SDRAM0_CLKTR, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(SDRAM0_B0CR, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(SDRAM0_TR0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
-	/* RA=10 RD=3                       */
-	mtsdram(SDRAM0_TR1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram(SDRAM0_RTR, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram(SDRAM0_CFG1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(SDRAM0_CFG0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
-	for (;;) {
-		mfsdram(SDRAM0_MCSTS, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	return (128 * 1024 * 1024);	/* 128 MB                           */
-}
-#endif				/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
deleted file mode 100644
index 5740a5623b..0000000000
--- a/board/amcc/ebony/flash.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-#define     BOOT_SMALL_FLASH        32	/* 00100000 */
-#define     FLASH_ONBD_N            2	/* 00000010 */
-#define     FLASH_SRAM_SEL          1	/* 00000001 */
-
-#define     BOOT_SMALL_FLASH_VAL    4
-#define     FLASH_ONBD_N_VAL        2
-#define     FLASH_SRAM_SEL_VAL      1
-
-static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
-	{0xffc00000, 0xffe00000, 0xff880000},	/* 0:000: configuraton 3 */
-	{0xffc00000, 0xffe00000, 0xff800000},	/* 1:001: configuraton 4 */
-	{0xffc00000, 0xffe00000, 0x00000000},	/* 2:010: configuraton 7 */
-	{0xffc00000, 0xffe00000, 0x00000000},	/* 3:011: configuraton 8 */
-	{0xff800000, 0xffa00000, 0xfff80000},	/* 4:100: configuraton 1 */
-	{0xff800000, 0xffa00000, 0xfff00000},	/* 5:101: configuraton 2 */
-	{0xffc00000, 0xffe00000, 0x00000000},	/* 6:110: configuraton 5 */
-	{0xffc00000, 0xffe00000, 0x00000000}	/* 7:111: configuraton 6 */
-};
-
-/*
- * include common flash code (for amcc boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-
-/*
- * Override the weak default mapping function with a board specific one
- */
-u32 flash_get_bank_size(int cs, int idx)
-{
-	u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
-
-	if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
-		/*
-		 * cs0: small flash (512KiB)
-		 * cs2: 2 * big flash (2 * 2MiB)
-		 */
-		if (cs == 0)
-			return flash_info[2].size;
-		if (cs == 2)
-			return flash_info[0].size + flash_info[1].size;
-	} else {
-		/*
-		 * cs0: 2 * big flash (2 * 2MiB)
-		 * cs2: small flash (512KiB)
-		 */
-		if (cs == 0)
-			return flash_info[0].size + flash_info[1].size;
-		if (cs == 2)
-			return flash_info[2].size;
-	}
-
-	return 0;
-}
-
-unsigned long flash_init(void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
-	unsigned char switch_status;
-	unsigned short index = 0;
-	int i;
-
-	/* read FPGA base register FPGA_REG0 */
-	switch_status = *fpga_base;
-
-	/* check the bitmap of switch status */
-	if (switch_status & BOOT_SMALL_FLASH) {
-		index += BOOT_SMALL_FLASH_VAL;
-	}
-	if (switch_status & FLASH_ONBD_N) {
-		index += FLASH_ONBD_N_VAL;
-	}
-	if (switch_status & FLASH_SRAM_SEL) {
-		index += FLASH_SRAM_SEL_VAL;
-	}
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *)
-					   flash_addr_table[index][i],
-					   &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-			       i, size_b[i], size_b[i] << 20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
-				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-				    &flash_info[2]);
-#ifdef CONFIG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[2]);
-		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
-				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-				    &flash_info[2]);
-#endif
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S
deleted file mode 100644
index 904e648987..0000000000
--- a/board/amcc/ebony/init.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
-*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- * SPDX-License-Identifier:	GPL-2.0+
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-	.section .bootpg,"ax"
-	.globl tlbtab
-
-tlbtab:
-	tlbtab_start
-
-	tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
-
-	/*
-	 * TLB entries for SDRAM are not needed on this platform.
-	 * They are dynamically generated in the SPD DDR(2) detection
-	 * routine.
-	 */
-
-	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX)
-	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX)
-	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG)
-	tlbtab_end
diff --git a/configs/ebony_defconfig b/configs/ebony_defconfig
deleted file mode 100644
index db93555b9e..0000000000
--- a/configs/ebony_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_EBONY=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5ef6c4e8d9..973798db93 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+ebony            powerpc     ppc4xx         -           -           Stefan Roese <sr@denx.de>
 taihu            powerpc     ppc4xx         -           -           John Otken <jotken@softadvances.com>
 lcd4_lwmon5      powerpc     ppc4xx         b6b5e394    2015-10-02  Stefan Roese <sr@denx.de>
 da830evm         arm         arm926ejs      d7e8b2b9    2015-09-12  Nick Thompson <nick.thompson@gefanuc.com>
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
deleted file mode 100644
index 3f0ad69738..0000000000
--- a/include/configs/ebony.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/************************************************************************
- * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_EBONY		1	    /* Board is ebony		*/
-#define CONFIG_440GP		1	    /* Specifc GP support	*/
-#define CONFIG_440		1	    /* ... PPC440 family	*/
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-
-/*
- * Include common defines/options for all AMCC eval boards
- */
-#define CONFIG_HOSTNAME		ebony
-#include "amcc-common.h"
-
-/*
- * Define here the location of the environment variables (FLASH or NVRAM).
- * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
- *       supported for backward compatibility.
- */
-#if 1
-#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
-#else
-#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
-#define CONFIG_SYS_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CONFIG_SYS_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
-#define CONFIG_SYS_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-#define CONFIG_SYS_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_FPGA_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE    0x2000	    /* Size of used area in RAM	*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
-
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CONFIG_ENV_ADDR		\
-	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_NVRAM */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CONFIG_SYS_MAX_FLASH_SECT	32		    /* sectors per device   */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_SYS_FLASH_ADDR0         0x5555
-#define CONFIG_SYS_FLASH_ADDR1         0x2aaa
-#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
-#define SPD_EEPROM_ADDRESS {0x53,0x52}	/* SPD i2c spd addresses	*/
-#define CONFIG_PROG_SDRAM_TLB	1	/* setup SDRAM TLB's dynamically*/
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
-
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/*
- * Default environment variables
- */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_AMCC_DEF_ENV						\
-	CONFIG_AMCC_DEF_ENV_POWERPC					\
-	CONFIG_AMCC_DEF_ENV_PPC_OLD					\
-	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"kernel_addr=ff800000\0"					\
-	"ramdisk_addr=ff810000\0"					\
-	""
-
-#define CONFIG_PHY_ADDR		8	/* PHY address			*/
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_PHY1_ADDR	9	/* EMAC1 PHY address		*/
-
-/*
- * Commands additional to the ones defined in amcc-common.h
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-/* General PCI */
-#define CONFIG_PCI			            /* include pci support	        */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP			        /* do pci plug-and-play         */
-#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CONFIG_SYS_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT	            /* let board init pci target    */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
-
-#endif	/* __CONFIG_H */