armv8: lx2160ardb : Add support for LX2160ARDB platform

LX2160ARDB is an evaluation board that supports LX2160A
family SoCs. This patch add base support for this board.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
[PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han
and re-arrange defconfig]
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

16 files changed, 1115 insertions, 3 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 455f06cfee..1b9d27e3d1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1083,6 +1083,19 @@ config TARGET_LS2081ARDB
 	  development platform that supports the QorIQ LS2081A/LS2041A
 	  Layerscape Architecture processor.
 
+config TARGET_LX2160ARDB
+	bool "Support lx2160ardb"
+	select ARCH_LX2160A
+	select ARCH_MISC_INIT
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LX2160ARDB platform.
+	  The lx2160ardb (LX2160A Reference design board (RDB)
+	  is a high-performance development platform that supports the
+	  QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
 config TARGET_HIKEY
 	bool "Support HiKey 96boards Consumer Edition Platform"
 	select ARM64
@@ -1555,6 +1568,7 @@ source "board/freescale/ls1046ardb/Kconfig"
 source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
+source "board/freescale/lx2160a/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
 source "board/grinn/chiliboard/Kconfig"
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 1c12bbde75..cc6d07832d 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -106,7 +106,7 @@ config PSCI_RESET
 		   !TARGET_LS1012AFRWY && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
-		   !TARGET_LS2081ARDB && \
+		   !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
 		   !ARCH_UNIPHIER && !TARGET_S32V234EVB
 	help
 	  Most armv8 systems have PSCI support enabled in EL3, either through
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fbc0f8afea..25b56e9efb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -246,7 +246,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
 	fsl-ls2081a-rdb.dtb \
 	fsl-ls2088a-rdb-qspi.dtb \
 	fsl-ls1088a-rdb.dtb \
-	fsl-ls1088a-qds.dtb
+	fsl-ls1088a-qds.dtb \
+	fsl-lx2160a-rdb.dtb
 dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1043a-qds-lpuart.dtb \
 	fsl-ls1043a-rdb.dtb \
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
new file mode 100644
index 0000000000..4b526449a1
--- /dev/null
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160ARDB device tree source
+ *
+ * Author:	Priyanka Jain <priyanka.jain@nxp.com>
+ *		Sriram Dash <sriram.dash@nxp.com>
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ARDB Board";
+	compatible = "fsl,lx2160ardb", "fsl,lx2160a";
+
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index b407dc6e13..510b070582 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -89,7 +89,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x0 0x2110000 0x0 0x10000>;
-		interrupts = <0 240 0x4>; /* Level high type */
+		interrupts = <0 26 0x4>; /* Level high type */
 		num-cs = <6>;
 	};
 
@@ -115,4 +115,65 @@
 		interrupts = <0 81 0x4>; /* Level high type */
 		dr_mode = "host";
 	};
+
+	esdhc0: esdhc@2140000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		clocks = <&clockgen 4 1>;
+		voltage-ranges = <1800 1800 3300 3300>;
+		sdhci,auto-cmd12;
+		little-endian;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	esdhc1: esdhc@2150000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2150000 0x0 0x10000>;
+		interrupts = <0 63 0x4>; /* Level high type */
+		clocks = <&clockgen 4 1>;
+		voltage-ranges = <1800 1800 3300 3300>;
+		sdhci,auto-cmd12;
+		non-removable;
+		little-endian;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	sata0: sata@3200000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata1: sata@3210000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata2: sata@3220000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>;
+			interrupts = <0 97 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata3: sata@3230000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>;
+			interrupts = <0 100 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
 };
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index af3dc59ea1..f1b98bcd2a 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -227,8 +227,12 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 #ifdef QIXIS_LBMAP_SD
 		QIXIS_WRITE(rst_ctl, 0x30);
 		QIXIS_WRITE(rcfg_ctl, 0);
+#ifdef NON_EXTENDED_DUTCFG
+		QIXIS_WRITE(dutcfg[0], QIXIS_RCW_SRC_SD);
+#else
 		set_lbmap(QIXIS_LBMAP_SD);
 		set_rcw_src(QIXIS_RCW_SRC_SD);
+#endif
 		QIXIS_WRITE(rcfg_ctl, 0x20);
 		QIXIS_WRITE(rcfg_ctl, 0x21);
 #else
diff --git a/board/freescale/lx2160a/Kconfig b/board/freescale/lx2160a/Kconfig
new file mode 100644
index 0000000000..5562c3ec45
--- /dev/null
+++ b/board/freescale/lx2160a/Kconfig
@@ -0,0 +1,16 @@
+if TARGET_LX2160ARDB
+
+config SYS_BOARD
+	default "lx2160a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "lx2160ardb"
+
+source "board/freescale/common/Kconfig"
+endif
diff --git a/board/freescale/lx2160a/MAINTAINERS b/board/freescale/lx2160a/MAINTAINERS
new file mode 100644
index 0000000000..aeb7dbc581
--- /dev/null
+++ b/board/freescale/lx2160a/MAINTAINERS
@@ -0,0 +1,8 @@
+LX2160ARDB BOARD
+M:	Priyanka Jain <priyanka.jain@nxp.com>
+S:	Maintained
+F:	board/freescale/lx2160a/
+F:	include/configs/lx2160a_common.h
+F:	include/configs/lx2160ardb.h
+F:	configs/lx2160ardb_tfa_defconfig
+F:	arch/arm/dts/fsl-lx2160a-rdb.dts
diff --git a/board/freescale/lx2160a/Makefile b/board/freescale/lx2160a/Makefile
new file mode 100644
index 0000000000..be3709d449
--- /dev/null
+++ b/board/freescale/lx2160a/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2018 Freescale Semiconductor
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += lx2160a.o
+obj-y += ddr.o
+obj-$(CONFIG_TARGET_LX2160ARDB) += eth_lx2160ardb.o
diff --git a/board/freescale/lx2160a/README b/board/freescale/lx2160a/README
new file mode 100644
index 0000000000..618c40b6fa
--- /dev/null
+++ b/board/freescale/lx2160a/README
@@ -0,0 +1,79 @@
+Overview
+--------
+The LX2160A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LX2160A
+Layerscape Architecture processor and its personalities.
+
+LX2160A SoC Overview
+--------------------------------------
+For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+LX2160ARDB board Overview
+----------------------
+DDR Memory
+	Two ports of 72-bits (8-bits ECC) DDR4.
+	Each port supports four chip-selects and two DIMM
+	connectors. Data rate upto 3.2 GT/s.
+
+SERDES ports
+	Thress serdes controllers (24 lanes)
+	Serdes1: Supports two USXGMII connectors, each connected through
+	Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
+	IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
+	CS4223 phy.
+
+	Serdes2: Supports one PCIe x4 (Gen1/2/3/4) connector, four SATA 3.0
+	connectors
+
+	Serdes3: Supports one PCIe x8 (Gen1/2/3/4) connector
+
+eSDHC
+	eSDHC1: Supports a SD connector for connecting SD cards
+	eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
+
+Octal SPI (XSPI)
+	Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
+	for off-board emulation
+
+I2C	All system devices on I2C1 multiplexed using PCA9547 multiplexer
+	Serial Ports
+
+USB 3.0
+	Two high speed USB 3.0 ports. First USB 3.0 port configured as
+	Host with Type-A connector, second USB 3.0 port configured as OTG
+	with micro-AB connector
+
+Serial Ports	Two UART ports
+Ethernet	Two RGMII interfaces
+Debug		ARM JTAG support
+
+Booting Options
+---------------
+a) Flexspi boot
+b) SD boot
+
+Memory map for Flexspi flash
+----------------------------
+Image							Flash Offset
+bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl)			0x00000000
+fip.bin (bl31 + bl33(u-boot) +
+	 header for Secure-boot(secure-boot only))	0x00100000
+Boot firmware Environment				0x00500000
+DDR PHY Firmware (fip_ddr_all.bin)			0x00800000
+DPAA2 MC Firmware					0x00A00000
+DPAA2 DPL						0x00D00000
+DPAA2 DPC						0x00E00000
+Kernel.itb						0x01000000
+
+Memory map for sd card
+----------------------------
+Image							SD card Offset
+bl2_sd.pbl (RCW+PBI+bl2.pbl)				0x00008
+fip.bin (bl31 + bl33(u-boot) +
+	 header for Secure-boot(secure-boot only))	0x00800
+Boot firmware Environment				0x02800
+DDR PHY Firmware (fip_ddr_all.bin)			0x04000
+DPAA2 MC Firmware					0x05000
+DPAA2 DPL						0x06800
+DPAA2 DPC						0x07000
+Kernel.itb						0x08000
diff --git a/board/freescale/lx2160a/ddr.c b/board/freescale/lx2160a/ddr.c
new file mode 100644
index 0000000000..cd422bf2bc
--- /dev/null
+++ b/board/freescale/lx2160a/ddr.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int fsl_initdram(void)
+{
+	gd->ram_size = tfa_get_dram_size();
+
+	if (!gd->ram_size)
+		gd->ram_size = fsl_ddr_sdram_size();
+
+	return 0;
+}
diff --git a/board/freescale/lx2160a/eth_lx2160ardb.c b/board/freescale/lx2160a/eth_lx2160ardb.c
new file mode 100644
index 0000000000..365ff73cef
--- /dev/null
+++ b/board/freescale/lx2160a/eth_lx2160ardb.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/fsl_mc.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool get_inphi_phy_id(struct mii_dev *bus, int addr, int devad)
+{
+	int phy_reg;
+	u32 phy_id;
+
+	phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
+	phy_id |= (phy_reg & 0xffff);
+
+	if (phy_id == PHY_UID_IN112525_S03)
+		return true;
+	else
+		return false;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+	struct memac_mdio_info mdio_info;
+	struct memac_mdio_controller *reg;
+	int i, interface;
+	struct mii_dev *dev;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_le32(&gur->rcwsr[28]) &
+				FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+	srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+	/* Register the EMI 1 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+	/* Register the EMI 2 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+	switch (srds_s1) {
+	case 19:
+		wriop_set_phy_address(WRIOP1_DPMAC2, 0,
+				      CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC3, 0,
+				      AQR107_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC4, 0,
+				      AQR107_PHY_ADDR2);
+		if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
+			wriop_set_phy_address(WRIOP1_DPMAC5, 0,
+					      INPHI_PHY_ADDR1);
+			wriop_set_phy_address(WRIOP1_DPMAC6, 0,
+					      INPHI_PHY_ADDR1);
+		}
+		wriop_set_phy_address(WRIOP1_DPMAC17, 0,
+				      RGMII_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC18, 0,
+				      RGMII_PHY_ADDR2);
+		break;
+
+	case 18:
+		wriop_set_phy_address(WRIOP1_DPMAC7, 0,
+				      CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC8, 0,
+				      CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC9, 0,
+				      CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC10, 0,
+				      CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC3, 0,
+				      AQR107_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC4, 0,
+				      AQR107_PHY_ADDR2);
+		if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
+			wriop_set_phy_address(WRIOP1_DPMAC5, 0,
+					      INPHI_PHY_ADDR1);
+			wriop_set_phy_address(WRIOP1_DPMAC6, 0,
+					      INPHI_PHY_ADDR1);
+		}
+		wriop_set_phy_address(WRIOP1_DPMAC17, 0,
+				      RGMII_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC18, 0,
+				      RGMII_PHY_ADDR2);
+		break;
+
+	default:
+		printf("SerDes1 protocol 0x%x is not supported on LX2160ARDB\n",
+		       srds_s1);
+		goto next;
+	}
+
+	for (i = WRIOP1_DPMAC2; i <= WRIOP1_DPMAC10; i++) {
+		interface = wriop_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		case PHY_INTERFACE_MODE_25G_AUI:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		case PHY_INTERFACE_MODE_XLAUI:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+	for (i = WRIOP1_DPMAC17; i <= WRIOP1_DPMAC18; i++) {
+		interface = wriop_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_RGMII:
+		case PHY_INTERFACE_MODE_RGMII_ID:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+next:
+	cpu_eth_init(bis);
+#endif /* CONFIG_FSL_MC_ENET */
+
+#ifdef CONFIG_PHY_AQUANTIA
+	/*
+	 * Export functions to be used by AQ firmware
+	 * upload application
+	 */
+	gd->jt->strcpy = strcpy;
+	gd->jt->mdelay = mdelay;
+	gd->jt->mdio_get_current_dev = mdio_get_current_dev;
+	gd->jt->phy_find_by_mask = phy_find_by_mask;
+	gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
+	gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
+#endif
+	return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+	mc_env_boot();
+#endif
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+int fdt_fixup_board_phy(void *fdt)
+{
+	int mdio_offset;
+	int ret;
+	struct mii_dev *dev;
+
+	ret = 0;
+
+	dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+	if (!get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
+		mdio_offset = fdt_path_offset(fdt, "/soc/mdio@0x8B97000");
+
+		if (mdio_offset < 0)
+			mdio_offset = fdt_path_offset(fdt, "/mdio@0x8B97000");
+
+		if (mdio_offset < 0) {
+			printf("mdio@0x8B9700 node not found in dts\n");
+			return mdio_offset;
+		}
+
+		ret = fdt_setprop_string(fdt, mdio_offset, "status",
+					 "disabled");
+		if (ret) {
+			printf("Could not set disable mdio@0x8B97000 %s\n",
+			       fdt_strerror(ret));
+			return ret;
+		}
+	}
+
+	return ret;
+}
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
new file mode 100644
index 0000000000..a62222e25c
--- /dev/null
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_pl01x.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ddr.h>
+#include <fsl_sec.h>
+#include <asm/io.h>
+#include <fdt_support.h>
+#include <linux/libfdt.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <efi_loader.h>
+#include <asm/arch/mmu.h>
+#include <hwconfig.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include "../common/qixis.h"
+#include "../common/vid.h"
+#include <fsl_immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pl01x_serial_platdata serial0 = {
+#if CONFIG_CONS_INDEX == 0
+	.base = CONFIG_SYS_SERIAL0,
+#elif CONFIG_CONS_INDEX == 1
+	.base = CONFIG_SYS_SERIAL1,
+#else
+#error "Unsupported console index value."
+#endif
+	.type = TYPE_PL011,
+};
+
+U_BOOT_DEVICE(nxp_serial0) = {
+	.name = "serial_pl01x",
+	.platdata = &serial0,
+};
+
+static struct pl01x_serial_platdata serial1 = {
+	.base = CONFIG_SYS_SERIAL1,
+	.type = TYPE_PL011,
+};
+
+U_BOOT_DEVICE(nxp_serial1) = {
+	.name = "serial_pl01x",
+	.platdata = &serial1,
+};
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void uart_get_clock(void)
+{
+	serial0.clock = get_serial_clock();
+	serial1.clock = get_serial_clock();
+}
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+	i2c_early_init_f();
+#endif
+	/* get required clock for UART IP */
+	uart_get_clock();
+
+	fsl_lsch3_early_init_f();
+	return 0;
+}
+
+int esdhc_status_fixup(void *blob, const char *compat)
+{
+	/* Enable both esdhc DT nodes for LX2160ARDB */
+	do_fixup_by_compat(blob, compat, "status", "okay",
+			   sizeof("okay"), 1);
+
+	return 0;
+}
+
+#if defined(CONFIG_VID)
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+	return select_i2c_ch_pca9547(channel);
+}
+
+#endif
+
+int checkboard(void)
+{
+	enum boot_src src = get_boot_src();
+	char buf[64];
+	u8 sw;
+
+	cpu_name(buf);
+	printf("Board: %s-RDB, ", buf);
+
+	sw = QIXIS_READ(arch);
+	printf("Board version: %c, boot from ", (sw & 0xf) - 1 + 'A');
+
+	if (src == BOOT_SOURCE_SD_MMC) {
+		puts("SD\n");
+	} else {
+		sw = QIXIS_READ(brdcfg[0]);
+		sw = (sw >> QIXIS_XMAP_SHIFT) & QIXIS_XMAP_MASK;
+		switch (sw) {
+		case 0:
+		case 4:
+			puts("FlexSPI DEV#0\n");
+			break;
+		case 1:
+			puts("FlexSPI DEV#1\n");
+			break;
+		case 2:
+		case 3:
+			puts("FlexSPI EMU\n");
+			break;
+		default:
+			printf("invalid setting, xmap: %d\n", sw);
+			break;
+		}
+	}
+	printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+
+	puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
+	puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
+	puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz\n");
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	return 100000000;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	return 100000000;
+}
+
+int board_init(void)
+{
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
+	return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+	int i;
+	u64 ddr_size = 0;
+
+	puts("\nDDR    ");
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		ddr_size += gd->bd->bi_dram[i].size;
+	print_size(ddr_size, "");
+	print_ddr_info(0);
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_MC_ENET
+extern int fdt_fixup_board_phy(void *fdt);
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	int offset;
+
+	offset = fdt_path_offset(fdt, "/soc/fsl-mc");
+
+	if (offset < 0)
+		offset = fdt_path_offset(fdt, "/fsl-mc");
+
+	if (offset < 0) {
+		printf("%s: fsl-mc node not found in device tree (error %d)\n",
+		       __func__, offset);
+		return;
+	}
+
+	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0)) {
+		fdt_status_okay(fdt, offset);
+		fdt_fixup_board_phy(fdt);
+	} else {
+		fdt_status_fail(fdt, offset);
+	}
+}
+
+void board_quiesce_devices(void)
+{
+	fsl_mc_ldpaa_exit(gd->bd);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	int i;
+	u64 base[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	ft_cpu_setup(blob, bd);
+
+	/* fixup DT for the three GPP DDR banks */
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		base[i] = gd->bd->bi_dram[i].start;
+		size[i] = gd->bd->bi_dram[i].size;
+	}
+
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+	else if (gd->arch.resv_ram >= base[2] &&
+		 gd->arch.resv_ram < base[2] + size[2])
+		size[2] = gd->arch.resv_ram - base[2];
+#endif
+
+	fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+
+#ifdef CONFIG_USB
+	fsl_fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_FSL_MC_ENET
+	fdt_fsl_mc_fixup_iommu_map_entry(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+
+	return 0;
+}
+#endif
+
+void qixis_dump_switch(void)
+{
+	int i, nr_of_cfgsw;
+
+	QIXIS_WRITE(cms[0], 0x00);
+	nr_of_cfgsw = QIXIS_READ(cms[1]);
+
+	puts("DIP switch settings dump:\n");
+	for (i = 1; i <= nr_of_cfgsw; i++) {
+		QIXIS_WRITE(cms[0], i);
+		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
+	}
+}
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
new file mode 100644
index 0000000000..9b63175692
--- /dev/null
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LX2160ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_CORTINA=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
new file mode 100644
index 0000000000..41931e5b53
--- /dev/null
+++ b/include/configs/lx2160a_common.h
@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LX2_COMMON_H
+#define __LX2_COMMON_H
+
+#include <asm/arch/stream_id_lsch3.h>
+#include <asm/arch/config.h>
+#include <asm/arch/soc.h>
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_GICV3
+#define CONFIG_FSL_TZPC_BP147
+#define CONFIG_FSL_MEMAC
+
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F	1
+
+/* DDR */
+#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#define CONFIG_SYS_FSL_DDR_INTLV_256B	/* force 256 byte interleaving */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE		0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CONFIG_SYS_DDR_BLOCK2_BASE		0x2080000000ULL
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	2
+#define CONFIG_SYS_SDRAM_SIZE			0x200000000UL
+#define CONFIG_DDR_SPD
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#define SPD_EEPROM_ADDRESS1		0x51
+#define SPD_EEPROM_ADDRESS2		0x52
+#define SPD_EEPROM_ADDRESS3		0x53
+#define SPD_EEPROM_ADDRESS4		0x54
+#define SPD_EEPROM_ADDRESS5		0x55
+#define SPD_EEPROM_ADDRESS6		0x56
+#define SPD_EEPROM_ADDRESS		SPD_EEPROM_ADDRESS1
+#define CONFIG_SYS_SPD_BUS_NUM		0	/* SPD on I2C bus 0 */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	2
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+#define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
+#define CONFIG_SYS_MONITOR_LEN		(936 * 1024)
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* SMP Definitinos  */
+#define CPU_RELEASE_ADDR		secondary_boot_func
+
+/* Generic Timer Definitions */
+/*
+ * This is not an accurate number. It is used in start.S. The frequency
+ * will be udpated later when get_bus_freq(0) is available.
+ */
+
+#define COUNTER_FREQUENCY		25000000	/* 25MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
+
+/* Serial Port */
+#define CONFIG_PL01X_SERIAL
+#define CONFIG_PL011_CLOCK		(get_bus_freq(0) / 4)
+#define CONFIG_SYS_SERIAL0		0x21c0000
+#define CONFIG_SYS_SERIAL1		0x21d0000
+#define CONFIG_SYS_SERIAL2		0x21e0000
+#define CONFIG_SYS_SERIAL3		0x21f0000
+/*below might needs to be removed*/
+#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					(void *)CONFIG_SYS_SERIAL1, \
+					(void *)CONFIG_SYS_SERIAL2, \
+					(void *)CONFIG_SYS_SERIAL3 }
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* MC firmware */
+#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH		0x20000
+#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET	0x00F00000
+#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH		0x20000
+#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET	0x00F20000
+#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS	5000
+
+/* Define phy_reset function to boot the MC based on mcinitcmd.
+ * This happens late enough to properly fixup u-boot env MAC addresses.
+ */
+#define CONFIG_RESET_PHY_R
+
+/*
+ * Carve out a DDR region which will not be used by u-boot/Linux
+ *
+ * It will be used by MC and Debug Server. The MC region must be
+ * 512MB aligned, so the min size to hide is 512MB.
+ */
+#ifdef CONFIG_FSL_MC_ENET
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE	(512UL * 1024 * 1024)
+#endif
+
+/* I2C bus multiplexer */
+#define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
+#define I2C_MUX_CH_DEFAULT		0x8
+
+/* RTC */
+#define RTC
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51  /* Channel 3*/
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
+/* Qixis */
+#define CONFIG_FSL_QIXIS
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_FPGA_ADDR		0x66
+
+/* PCI */
+#ifdef CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* MMC */
+#ifdef CONFIG_MMC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+/* SATA */
+
+#ifdef CONFIG_SCSI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
+#define CONFIG_SYS_SATA2		AHCI_BASE_ADDR2
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
+/* USB */
+#ifdef CONFIG_USB
+#define CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+#endif
+
+/* FlexSPI */
+#ifdef CONFIG_NXP_FSPI
+#define NXP_FSPI_FLASH_SIZE		SZ_64M
+#define NXP_FSPI_FLASH_NUM		1
+#endif
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
+#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE		128
+
+#define CONFIG_SYS_MMC_ENV_DEV          0
+#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#define CONFIG_ENV_OFFSET		0x500000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
+					 CONFIG_ENV_OFFSET)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
+
+/* Initial environment variables */
+#define XSPI_NOR_BOOTCOMMAND	"fsl_mc apply dpl 0x20d00000;" \
+				"sf probe 0:0;" \
+				"sf read 0xa0000000 0x1000000 0x3000000;" \
+				"bootm 0xa0000000"
+
+#define SD_BOOTCOMMAND		"mmc read 0xa0000000 0x6800 0xA0;" \
+				"fsl_mc apply dpl 0xa0000000;" \
+				"mmc read 0xb0000000 0x8000 0x1d000;" \
+				"bootm 0xb0000000"
+
+#define XSPI_MC_INIT_CMD			\
+	"fsl_mc start mc 0x20a00000 0x20e00000\0"
+
+#define SD_MC_INIT_CMD				\
+	"mmc read 0x80000000 0x5000 0x800;"	\
+	"mmc read 0x80100000 0x7000 0x800;"	\
+	"fsl_mc start mc 0x80000000 0x80100000\0"
+
+#endif /* __LX2_COMMON_H */
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
new file mode 100644
index 0000000000..67d214deb9
--- /dev/null
+++ b/include/configs/lx2160ardb.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LX2_RDB_H
+#define __LX2_RDB_H
+
+#include "lx2160a_common.h"
+
+/* Qixis */
+#define QIXIS_XMAP_MASK			0x07
+#define QIXIS_XMAP_SHIFT		5
+#define QIXIS_RST_CTL_RESET_EN		0x30
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x20
+#define QIXIS_LBMAP_QSPI		0x00
+#define QIXIS_RCW_SRC_QSPI		0xff
+#define QIXIS_RST_CTL_RESET		0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_LBMAP_MASK		0x0f
+#define QIXIS_LBMAP_SD
+#define QIXIS_RCW_SRC_SD           0x08
+#define NON_EXTENDED_DUTCFG
+
+/* VID */
+
+#define I2C_MUX_CH_VOL_MONITOR		0xA
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR		0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
+#define CONFIG_VID_FLS_ENV		"lx2160ardb_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed*/
+#define VDD_MV_MIN			775
+#define VDD_MV_MAX			855
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE                  0x0
+#define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
+#define PMBUS_CMD_VOUT_COMMAND          0x21
+#define PWM_CHANNEL0                    0x0
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* RTC */
+#define CONFIG_SYS_RTC_BUS_NUM		4
+
+/* MAC/PHY configuration */
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_MII
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
+
+#define AQR107_PHY_ADDR1	0x04
+#define AQR107_PHY_ADDR2	0x05
+
+#define CORTINA_NO_FW_UPLOAD
+#define CORTINA_PHY_ADDR1	0x0
+#define INPHI_PHY_ADDR1		0x0
+
+#define RGMII_PHY_ADDR1		0x01
+#define RGMII_PHY_ADDR2		0x02
+
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM	           0
+#define CONFIG_SYS_I2C_EEPROM_ADDR	           0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	    1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"scriptaddr=0x80800000\0"		\
+	"kernel_addr_r=0x81000000\0"		\
+	"pxefile_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x88000000\0"		\
+	"ramdisk_addr_r=0x89000000\0"		\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0x21000000\0"		\
+	"lx2160ardb_vdd_mv=800\0"		\
+	"mcmemsize=0x40000000\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LX2_RDB_H */