nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE

This is always defined to 16K, so we move this over to
include/fsl_validate.h to start with. Next, we rename this from CONFIG_
to FSL_. Coalesce the various comments around this definition to be in
fsl_validate.h as well to explain the usage.

Signed-off-by: Tom Rini <trini@konsulko.com>

9 files changed, 12 insertions, 98 deletions

diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index 9ca350ed46..029d06bbf9 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -143,7 +143,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 		(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
 
 	hdr_addr = (spl_image->entry_point + spl_image->size -
-			CONFIG_U_BOOT_HDR_SIZE);
+			FSL_U_BOOT_HDR_SIZE);
 	spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point);
 	/*
 	 * In case of failure in validation, spl_validate_uboot would
diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c
index 3b464ce10c..60a865b566 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c
@@ -278,11 +278,11 @@ void nand_boot(void)
 	 * U-Boot header is appended at end of U-boot image, so
 	 * calculate U-boot header address using U-boot header size.
 	 */
-#define CONFIG_U_BOOT_HDR_ADDR \
+#define FSL_U_BOOT_HDR_ADDR \
 		((CFG_SYS_NAND_U_BOOT_START + \
 		  CFG_SYS_NAND_U_BOOT_SIZE) - \
-		 CONFIG_U_BOOT_HDR_SIZE)
-	spl_validate_uboot(CONFIG_U_BOOT_HDR_ADDR,
+		 FSL_U_BOOT_HDR_SIZE)
+	spl_validate_uboot(FSL_U_BOOT_HDR_ADDR,
 			   CFG_SYS_NAND_U_BOOT_START);
 	/*
 	 * In case of failure in validation, spl_validate_uboot would
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5bdc2105f5..7a5bf937e4 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -20,13 +20,7 @@
 
 #ifdef CONFIG_MTD_RAW_NAND
 #ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CFG_SYS_NAND_U_BOOT_SIZE	((768 << 10) + \
-					 CONFIG_U_BOOT_HDR_SIZE)
+#define CFG_SYS_NAND_U_BOOT_SIZE	((768 << 10) + (16 << 10))
 #else
 #define CFG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #endif
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 5612c60ae9..b15c4a238b 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -38,21 +38,6 @@
 #define SDRAM_CFG2_FRC_SR		0x80000000
 #define SDRAM_CFG_BI			0x00000001
 
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw U-Boot image instead of FIT image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
 #define PHYS_SDRAM			0x80000000
 #define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 281b26fa2b..9b22a2db21 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -37,25 +37,6 @@
 #define SDRAM_CFG2_FRC_SR		0x80000000
 #define SDRAM_CFG_BI			0x00000001
 
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
 #define PHYS_SDRAM			0x80000000
 #define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index d0380b3373..685e7e65d1 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -41,37 +41,10 @@
 /* Serial Port */
 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
 
-/* SD boot SPL */
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-#endif
-
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CFG_SYS_NAND_U_BOOT_DST	CONFIG_TEXT_BASE
 #define CFG_SYS_NAND_U_BOOT_START	CONFIG_TEXT_BASE
-
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-
 #endif
 
 /* GPIO */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 250891e9e3..ae9dc0c73b 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -41,19 +41,6 @@
 /* Serial Port */
 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
 
-/* SD boot SPL */
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-#endif
-
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CFG_SYS_NAND_U_BOOT_DST	CONFIG_TEXT_BASE
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index bcba8d81c0..86c5d48c0d 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -133,17 +133,4 @@ unsigned long long get_qixis_addr(void);
 	" 0x580e00000 \0"
 #endif
 
-#ifdef CONFIG_SPL
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#endif
-
 #endif /* __LS1088_COMMON_H */
diff --git a/include/fsl_validate.h b/include/fsl_validate.h
index 252d499e7b..fbcbd42496 100644
--- a/include/fsl_validate.h
+++ b/include/fsl_validate.h
@@ -280,4 +280,11 @@ int fsl_setenv_chain_of_trust(void);
  * Architecture header (appended to U-boot image).
  */
 void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
+
+/*
+ * This header is appended at end of image and copied to DDR along
+ * with the U-Boot image and later used as part of the validation
+ * flow
+ */
+#define FSL_U_BOOT_HDR_SIZE				(16 << 10)
 #endif