Convert CONFIG_NAND_OMAP_ECCSCHEME to KconfigWIP/migrate-SYS_NAND-vars

The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in
include/linux/mtd/omap_gpmc.h for valid ECC schemes.  Make which one we
will use be a choice statement, enumerating the ones which we have
implemented.

Signed-off-by: Tom Rini <trini@konsulko.com>

37 files changed, 116 insertions, 89 deletions

diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index 272d5b8775..ea4032fe1f 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -88,6 +88,7 @@ CONFIG_MISC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 665c54a881..17b301756d 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -57,6 +57,7 @@ CONFIG_DM_PCA953X=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index 59256c1894..443bdca096 100644
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -60,6 +60,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig
index 8b35144164..1838011202 100644
--- a/configs/am43xx_evm_rtconly_defconfig
+++ b/configs/am43xx_evm_rtconly_defconfig
@@ -47,6 +47,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index 119392d848..c5a6a07b32 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -63,6 +63,7 @@ CONFIG_MISC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 2ab15c975b..1eb394cbd8 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -65,6 +65,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 1c067fd7df..ccdd4f606f 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -41,6 +41,7 @@ CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index 65bdcf6bf7..59a919bece 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -85,6 +85,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x80000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_COUNT=0x80
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 17e793c313..8f6e13e2a8 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -60,6 +60,7 @@ CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_SYS_MTDPARTS_RUNTIME=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index fe37a981e4..9d8ac94d2a 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -57,6 +57,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index 435e0f7e2b..e54646c21c 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -62,6 +62,7 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index c0830dcfc1..206118e6af 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -74,6 +74,7 @@ CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index 0174b3a669..b89ab392d0 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -62,6 +62,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 18e87f125c..becf862dcb 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -57,6 +57,7 @@ CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_OMAP36XX_PINS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index 1c093162d3..f8518a01bc 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -63,6 +63,7 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/doc/README.nand b/doc/README.nand
index f6460dba60..ffcea90799 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -200,72 +200,6 @@ Platform specific options
 	so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
         SPL-NAND driver with software ECC correction support.
 
-   CONFIG_NAND_OMAP_ECCSCHEME
-	On OMAP platforms, this CONFIG specifies NAND ECC scheme.
-	It can take following values:
-	OMAP_ECC_HAM1_CODE_SW
-		1-bit Hamming code using software lib.
-		(for legacy devices only)
-	OMAP_ECC_HAM1_CODE_HW
-		1-bit Hamming code using GPMC hardware.
-		(for legacy devices only)
-	OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
-		4-bit BCH code (unsupported)
-	OMAP_ECC_BCH4_CODE_HW
-		4-bit BCH code (unsupported)
-	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-		8-bit BCH code with
-		- ecc calculation using GPMC hardware engine,
-		- error detection using software library.
-		- requires CONFIG_BCH to enable software BCH library
-		(For legacy device which do not have ELM h/w engine)
-	OMAP_ECC_BCH8_CODE_HW
-		8-bit BCH code with
-		- ecc calculation using GPMC hardware engine,
-		- error detection using ELM hardware engine.
-	OMAP_ECC_BCH16_CODE_HW
-		16-bit BCH code with
-		- ecc calculation using GPMC hardware engine,
-		- error detection using ELM hardware engine.
-
-	How to select ECC scheme on OMAP and AMxx platforms ?
-	-----------------------------------------------------
-	Though higher ECC schemes have more capability to detect and correct
-	bit-flips, but still selection of ECC scheme is dependent on following
-	- hardware engines present in SoC.
-		Some legacy OMAP SoC do not have ELM h/w engine thus such
-		SoC cannot support BCHx_HW ECC schemes.
-	- size of OOB/Spare region
-		With higher ECC schemes, more OOB/Spare area is required to
-		store ECC. So choice of ECC scheme is limited by NAND oobsize.
-
-	In general following expression can help:
-		NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
-	where
-		NAND_OOBSIZE	= number of bytes available in
-				OOB/spare area per NAND page.
-		NAND_PAGESIZE	= bytes in main-area of NAND page.
-		ECC_BYTES	= number of ECC bytes generated to
-				protect 512 bytes of data, which is:
-				3 for HAM1_xx ecc schemes
-				7 for BCH4_xx ecc schemes
-				14 for BCH8_xx ecc schemes
-				26 for BCH16_xx ecc schemes
-
-		example to check for BCH16 on 2K page NAND
-		NAND_PAGESIZE = 2048
-		NAND_OOBSIZE = 64
-		2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
-		Thus BCH16 cannot be supported on 2K page NAND.
-
-		However, for 4K pagesize NAND
-		NAND_PAGESIZE = 4096
-		NAND_OOBSIZE = 224
-		ECC_BYTES = 26
-		2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
-		Thus BCH16 can be supported on 4K page NAND.
-
-
     CONFIG_NAND_OMAP_GPMC_PREFETCH
 	On OMAP platforms that use the GPMC controller
 	(CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index df7a5513d0..e8f54d54bd 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -152,9 +152,10 @@ config NAND_OMAP_GPMC
 	  do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
 	  and BCH16 ECC algorithms.
 
+if NAND_OMAP_GPMC
+
 config NAND_OMAP_GPMC_PREFETCH
 	bool "Enable GPMC Prefetch"
-	depends on NAND_OMAP_GPMC
 	default y
 	help
 	  On OMAP platforms that use the GPMC controller
@@ -163,7 +164,7 @@ config NAND_OMAP_GPMC_PREFETCH
 
 config NAND_OMAP_ELM
 	bool "Enable ELM driver for OMAPxx and AMxx platforms."
-	depends on NAND_OMAP_GPMC && !OMAP34XX
+	depends on !OMAP34XX
 	help
 	  ELM controller is used for ECC error detection (not ECC calculation)
 	  of BCH4, BCH8 and BCH16 ECC algorithms.
@@ -172,6 +173,104 @@ config NAND_OMAP_ELM
 	  detection. However ECC calculation on such plaforms would still be
 	  done by GPMC controller.
 
+choice
+	prompt "ECC scheme"
+	default NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+	help
+	On OMAP platforms, this CONFIG specifies NAND ECC scheme.
+	It can take following values:
+	OMAP_ECC_HAM1_CODE_SW
+		1-bit Hamming code using software lib.
+		(for legacy devices only)
+	OMAP_ECC_HAM1_CODE_HW
+		1-bit Hamming code using GPMC hardware.
+		(for legacy devices only)
+	OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
+		4-bit BCH code (unsupported)
+	OMAP_ECC_BCH4_CODE_HW
+		4-bit BCH code (unsupported)
+	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+		8-bit BCH code with
+		- ecc calculation using GPMC hardware engine,
+		- error detection using software library.
+		- requires CONFIG_BCH to enable software BCH library
+		(For legacy device which do not have ELM h/w engine)
+	OMAP_ECC_BCH8_CODE_HW
+		8-bit BCH code with
+		- ecc calculation using GPMC hardware engine,
+		- error detection using ELM hardware engine.
+	OMAP_ECC_BCH16_CODE_HW
+		16-bit BCH code with
+		- ecc calculation using GPMC hardware engine,
+		- error detection using ELM hardware engine.
+
+	How to select ECC scheme on OMAP and AMxx platforms ?
+	-----------------------------------------------------
+	Though higher ECC schemes have more capability to detect and correct
+	bit-flips, but still selection of ECC scheme is dependent on following
+	- hardware engines present in SoC.
+		Some legacy OMAP SoC do not have ELM h/w engine thus such
+		SoC cannot support BCHx_HW ECC schemes.
+	- size of OOB/Spare region
+		With higher ECC schemes, more OOB/Spare area is required to
+		store ECC. So choice of ECC scheme is limited by NAND oobsize.
+
+	In general following expression can help:
+		NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
+	where
+		NAND_OOBSIZE	= number of bytes available in
+				OOB/spare area per NAND page.
+		NAND_PAGESIZE	= bytes in main-area of NAND page.
+		ECC_BYTES	= number of ECC bytes generated to
+				protect 512 bytes of data, which is:
+				3 for HAM1_xx ecc schemes
+				7 for BCH4_xx ecc schemes
+				14 for BCH8_xx ecc schemes
+				26 for BCH16_xx ecc schemes
+
+		example to check for BCH16 on 2K page NAND
+		NAND_PAGESIZE = 2048
+		NAND_OOBSIZE = 64
+		2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
+		Thus BCH16 cannot be supported on 2K page NAND.
+
+		However, for 4K pagesize NAND
+		NAND_PAGESIZE = 4096
+		NAND_OOBSIZE = 224
+		ECC_BYTES = 26
+		2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
+		Thus BCH16 can be supported on 4K page NAND.
+
+config NAND_OMAP_ECCSCHEME_HAM1_CODE_SW
+	bool "1-bit Hamming code using software lib"
+
+config NAND_OMAP_ECCSCHEME_HAM1_CODE_HW
+	bool "1-bit Hamming code using GPMC hardware"
+
+config NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW
+	bool "8-bit BCH code with HW calculation SW error detection"
+
+config NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+	bool "8-bit BCH code with HW calculation and error detection"
+
+config NAND_OMAP_ECCSCHEME_BCH16_CODE_HW
+	bool "16-bit BCH code with HW calculation and error detection"
+
+endchoice
+
+config NAND_OMAP_ECCSCHEME
+	int
+	default 1 if NAND_OMAP_ECCSCHEME_HAM1_CODE_SW
+	default 2 if NAND_OMAP_ECCSCHEME_HAM1_CODE_HW
+	default 5 if NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW
+	default 6 if NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+	default 7 if NAND_OMAP_ECCSCHEME_BCH16_CODE_HW
+	help
+	  This must be kept in sync with the enum in
+	  include/linux/mtd/omap_gpmc.h
+
+endif
+
 config NAND_VF610_NFC
 	bool "Support for Freescale NFC for VF610"
 	select SYS_NAND_SELF_INIT
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index dc8c3e2a5d..7fb1b3a3e3 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -191,7 +191,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 /* NAND: SPL related configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index fd7d589dd6..68b4e4f590 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -130,7 +130,6 @@
 			}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        26
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
 #define MTDIDS_DEFAULT                  "nand0=nand.0"
 
 #endif /* CONFIG_MTD_RAW_NAND */
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 4a303b702c..339a975c74 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -115,6 +115,5 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 
 #endif	/* ! __CONFIG_IGEP003X_H */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 547d27322e..ab410faff6 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -43,7 +43,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 56b85df4cf..9342d2063d 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -161,7 +161,6 @@
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
 #define CONFIG_SYS_NAND_ECCPOS	{ 2, 3, 4, 5, 6, 7, 8, 9, \
 				10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
 				20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index f55f57ce22..32f2174641 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -219,7 +219,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #endif
 #endif
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index caedd3004b..4c56a8a59b 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -144,7 +144,6 @@ NANDTGTS \
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
 					10, 11, 12, 13, 14, 15, 16, 17, \
 					18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index c7b2131c26..49a8d71031 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -134,7 +134,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 /* NAND: SPL related configs */
 
 /* USB configuration */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 9ad883d9ff..9708768a68 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -25,7 +25,6 @@
 /* NAND support */
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 8113d759cf..591a33fca6 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -138,7 +138,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 1e3a66f9d9..a023332203 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -86,7 +86,6 @@
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 245119db67..b04e5266e3 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -16,8 +16,6 @@
 /* NAND specific changes for etamin due to different page size */
 #undef CONFIG_SYS_NAND_ECCPOS
 #undef CONFIG_SYS_ENV_SECT_SIZE
-#undef CONFIG_NAND_OMAP_ECCSCHEME
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
 
 #define CONFIG_SYS_ENV_SECT_SIZE       (512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_NAND_ECCPOS	{ 2, 3, 4, 5, 6, 7, 8, 9, \
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e8f455a5ca..270c328ff7 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -26,7 +26,6 @@
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 8d1233c075..eeb9ef8c74 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -31,7 +31,6 @@
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index ced449d7ad..c1ef040ce3 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -84,6 +84,5 @@
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 
 #endif /* __IGEP00X0_H */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index f6b5b5f986..908114e2a9 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -44,7 +44,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #endif
diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h
index 935bb7a07c..af6f7e14df 100644
--- a/include/configs/phycore_am335x_r2.h
+++ b/include/configs/phycore_am335x_r2.h
@@ -96,7 +96,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 
 /* NAND: SPL related configs */
 #ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index fd74d5735e..615458cde8 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -82,7 +82,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 
 #define CONFIG_SYS_NAND_ECCSTEPS	4
 #define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 34e4309dad..0a2309144a 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -133,7 +133,6 @@
 					 56, 57, 58, 59, 60, 61, 62, 63}
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 5964b59da8..fa99152d6f 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -68,7 +68,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 
 /* SPL */
 /* Defines for SPL */