Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2cWIP/28Nov2020

7 files changed, 655 insertions, 4 deletions

diff --git a/arch/riscv/cpu/fu540/Kconfig b/arch/riscv/cpu/fu540/Kconfig
index ac3f183342..61bd5c426e 100644
--- a/arch/riscv/cpu/fu540/Kconfig
+++ b/arch/riscv/cpu/fu540/Kconfig
@@ -35,6 +35,8 @@ config SIFIVE_FU540
 	imply SIFIVE_OTP
 	imply DM_PWM
 	imply PWM_SIFIVE
+	imply DM_I2C
+	imply SYS_I2C_OCORES
 
 if ENV_IS_IN_SPI_FLASH
 
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
index e70d1e53f9..64fdbd44b4 100644
--- a/board/sifive/fu540/Kconfig
+++ b/board/sifive/fu540/Kconfig
@@ -47,5 +47,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	imply SPI_FLASH_ISSI
 	imply SYSRESET
 	imply SYSRESET_GPIO
+	imply CMD_I2C
 
 endif
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 8ae54e1e93..37958083af 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -342,6 +342,13 @@ config SYS_I2C_NEXELL
 	  have several I2C ports and all are provided, controlled by the
 	  device tree.
 
+config SYS_I2C_OCORES
+	bool "ocores I2C driver"
+	depends on DM_I2C
+	help
+	  Add support for ocores I2C controller. For details see
+	  https://opencores.org/projects/i2c
+
 config SYS_I2C_OMAP24XX
 	bool "TI OMAP2+ I2C driver"
 	depends on ARCH_OMAP2PLUS || ARCH_K3
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index b37198036c..1aac5c481e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o
 obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o
+obj-$(CONFIG_SYS_I2C_OCORES) += ocores_i2c.o
 obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR_I2C) += rcar_i2c.o
diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index 791f32e971..c54989504e 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -774,10 +774,12 @@ int designware_i2c_ofdata_to_platdata(struct udevice *bus)
 	dev_read_u32(bus, "i2c-sda-hold-time-ns", &priv->sda_hold_time_ns);
 
 	ret = reset_get_bulk(bus, &priv->resets);
-	if (ret)
-		dev_warn(bus, "Can't get reset: %d\n", ret);
-	else
+	if (ret) {
+		if (ret != -ENOTSUPP)
+			dev_warn(bus, "Can't get reset: %d\n", ret);
+	} else {
 		reset_deassert_bulk(&priv->resets);
+	}
 
 #if CONFIG_IS_ENABLED(CLK)
 	ret = clk_get_by_index(bus, 0, &priv->clk);
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index fdb8fd42e5..14c594d648 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -823,7 +823,8 @@ static int mvtwsi_i2c_bind(struct udevice *bus)
 	struct mvtwsi_registers *twsi = dev_read_addr_ptr(bus);
 
 	/* Disable the hidden slave in i2c0 of these platforms */
-	if ((IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARCH_KIRKWOOD))
+	if ((IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARCH_KIRKWOOD)
+				|| IS_ENABLED(CONFIG_ARMADA_8K))
 			&& bus->req_seq == 0)
 		twsi_disable_i2c_slave(twsi);
 
diff --git a/drivers/i2c/ocores_i2c.c b/drivers/i2c/ocores_i2c.c
new file mode 100644
index 0000000000..c4f2cc43f9
--- /dev/null
+++ b/drivers/i2c/ocores_i2c.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ocores-i2c.c: I2C bus driver for OpenCores I2C controller
+ * (https://opencores.org/projects/i2c)
+ *
+ * (C) Copyright Peter Korsgaard <peter@korsgaard.com>
+ *
+ * Copyright (C) 2020 SiFive, Inc.
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ *
+ * Support for the GRLIB port of the controller by
+ * Andreas Larsson <andreas@gaisler.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <i2c.h>
+#include <linux/io.h>
+#include <linux/compat.h>
+#include <linux/log2.h>
+#include <linux/delay.h>
+
+/* registers */
+#define OCI2C_PRELOW		0
+#define OCI2C_PREHIGH		1
+#define OCI2C_CONTROL		2
+#define OCI2C_DATA		3
+#define OCI2C_CMD		4 /* write only */
+#define OCI2C_STATUS		4 /* read only, same address as OCI2C_CMD */
+
+#define OCI2C_CTRL_IEN		0x40
+#define OCI2C_CTRL_EN		0x80
+
+#define OCI2C_CMD_START		0x91
+#define OCI2C_CMD_STOP		0x41
+#define OCI2C_CMD_READ		0x21
+#define OCI2C_CMD_WRITE		0x11
+#define OCI2C_CMD_READ_ACK	0x21
+#define OCI2C_CMD_READ_NACK	0x29
+#define OCI2C_CMD_IACK		0x01
+
+#define OCI2C_STAT_IF		0x01
+#define OCI2C_STAT_TIP		0x02
+#define OCI2C_STAT_ARBLOST	0x20
+#define OCI2C_STAT_BUSY		0x40
+#define OCI2C_STAT_NACK		0x80
+
+#define STATE_DONE		0
+#define STATE_START		1
+#define STATE_WRITE		2
+#define STATE_READ		3
+#define STATE_ERROR		4
+
+#define TYPE_OCORES		0
+#define TYPE_GRLIB		1
+
+#define OCORES_FLAG_BROKEN_IRQ BIT(1) /* Broken IRQ for FU540-C000 SoC */
+
+struct ocores_i2c_bus {
+	void __iomem *base;
+	u32 reg_shift;
+	u32 reg_io_width;
+	unsigned long flags;
+	struct i2c_msg *msg;
+	int pos;
+	int nmsgs;
+	int state; /* see STATE_ */
+	struct clk clk;
+	int ip_clk_khz;
+	int bus_clk_khz;
+	void (*setreg)(struct ocores_i2c_bus *i2c, int reg, u8 value);
+	u8 (*getreg)(struct ocores_i2c_bus *i2c, int reg);
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Boolean attribute values */
+enum {
+	FALSE = 0,
+	TRUE,
+};
+
+static void oc_setreg_8(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	writeb(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_16(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	writew(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	writel(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_16be(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	out_be16(i2c->base + (reg << i2c->reg_shift), value);
+}
+
+static void oc_setreg_32be(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	out_be32(i2c->base + (reg << i2c->reg_shift), value);
+}
+
+static inline u8 oc_getreg_8(struct ocores_i2c_bus *i2c, int reg)
+{
+	return readb(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_16(struct ocores_i2c_bus *i2c, int reg)
+{
+	return readw(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32(struct ocores_i2c_bus *i2c, int reg)
+{
+	return readl(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_16be(struct ocores_i2c_bus *i2c, int reg)
+{
+	return in_be16(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32be(struct ocores_i2c_bus *i2c, int reg)
+{
+	return in_be32(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline void oc_setreg(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	i2c->setreg(i2c, reg, value);
+}
+
+static inline u8 oc_getreg(struct ocores_i2c_bus *i2c, int reg)
+{
+	return i2c->getreg(i2c, reg);
+}
+
+static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg)
+{
+	return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0);
+}
+
+static void ocores_process(struct ocores_i2c_bus *i2c, u8 stat)
+{
+	struct i2c_msg *msg = i2c->msg;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* stop has been sent */
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
+		return;
+	}
+
+	/* error? */
+	if (stat & OCI2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+		return;
+	}
+
+	if (i2c->state == STATE_START || i2c->state == STATE_WRITE) {
+		i2c->state =
+			(msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & OCI2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	} else {
+		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
+	}
+
+	/* end of msg? */
+	if (i2c->pos == msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {       /* end? */
+			/* send start? */
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				u8 addr = i2c_8bit_addr_from_msg(msg);
+
+				i2c->state = STATE_START;
+
+				oc_setreg(i2c, OCI2C_DATA, addr);
+				oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+				return;
+			}
+			i2c->state = (msg->flags & I2C_M_RD)
+				? STATE_READ : STATE_WRITE;
+		} else {
+			i2c->state = STATE_DONE;
+			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+			return;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len - 1) ?
+				OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK);
+	} else {
+		oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]);
+		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE);
+	}
+}
+
+static irqreturn_t ocores_isr(int irq, void *dev_id)
+{
+	struct ocores_i2c_bus *i2c = dev_id;
+	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+
+	if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) {
+		if ((stat & OCI2C_STAT_IF) && !(stat & OCI2C_STAT_BUSY))
+			return IRQ_NONE;
+	} else if (!(stat & OCI2C_STAT_IF)) {
+		return IRQ_NONE;
+	}
+	ocores_process(i2c, stat);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * Wait until something change in a given register
+ * @i2c: ocores I2C device instance
+ * @reg: register to query
+ * @mask: bitmask to apply on register value
+ * @val: expected result
+ * @msec: timeout in msec
+ *
+ * Timeout is necessary to avoid to stay here forever when the chip
+ * does not answer correctly.
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+static int ocores_wait(struct ocores_i2c_bus *i2c,
+		       int reg, u8 mask, u8 val,
+		       const unsigned long msec)
+{
+	u32 count = 0;
+
+	while (1) {
+		u8 status = oc_getreg(i2c, reg);
+
+		if ((status & mask) == val)
+			break;
+
+		udelay(1);
+		count += 1;
+
+		if (count == (1000 * msec))
+			return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/**
+ * Wait until is possible to process some data
+ * @i2c: ocores I2C device instance
+ *
+ * Used when the device is in polling mode (interrupts disabled).
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+static int ocores_poll_wait(struct ocores_i2c_bus *i2c)
+{
+	u8 mask;
+	int err;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* transfer is over */
+		mask = OCI2C_STAT_BUSY;
+	} else {
+		/* on going transfer */
+		mask = OCI2C_STAT_TIP;
+		/*
+		 * We wait for the data to be transferred (8bit),
+		 * then we start polling on the ACK/NACK bit
+		 */
+		udelay((8 * 1000) / i2c->bus_clk_khz);
+	}
+
+	/*
+	 * once we are here we expect to get the expected result immediately
+	 * so if after 1ms we timeout then something is broken.
+	 */
+	err = ocores_wait(i2c, OCI2C_STATUS, mask, 0, 1);
+	if (err)
+		debug("%s: STATUS timeout, bit 0x%x did not clear in 1ms\n",
+		      __func__, mask);
+	return err;
+}
+
+/**
+ * It handles an IRQ-less transfer
+ * @i2c: ocores I2C device instance
+ *
+ * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same
+ * (only that IRQ are not produced). This means that we can re-use entirely
+ * ocores_isr(), we just add our polling code around it.
+ *
+ * It can run in atomic context
+ */
+static void ocores_process_polling(struct ocores_i2c_bus *i2c)
+{
+	while (1) {
+		irqreturn_t ret;
+		int err;
+
+		err = ocores_poll_wait(i2c);
+		if (err) {
+			i2c->state = STATE_ERROR;
+			break; /* timeout */
+		}
+
+		ret = ocores_isr(-1, i2c);
+		if (ret == IRQ_NONE) {
+			break; /* all messages have been transferred */
+		} else {
+			if (i2c->flags & OCORES_FLAG_BROKEN_IRQ)
+				if (i2c->state == STATE_DONE)
+					break;
+		}
+	}
+}
+
+static int ocores_xfer_core(struct ocores_i2c_bus *i2c,
+			    struct i2c_msg *msgs, int num, bool polling)
+{
+	u8 ctrl;
+
+	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+	if (polling)
+		oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~OCI2C_CTRL_IEN);
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_START;
+
+	oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg));
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
+
+	if (polling)
+		ocores_process_polling(i2c);
+
+	return (i2c->state == STATE_DONE) ? num : -EIO;
+}
+
+static int ocores_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
+{
+	struct ocores_i2c_bus *bus = dev_get_priv(dev);
+	int ret;
+
+	debug("i2c_xfer: %d messages\n", nmsgs);
+
+	ret = ocores_xfer_core(bus, msg, nmsgs, 1);
+
+	if (ret != nmsgs) {
+		debug("i2c_write: error sending\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int ocores_i2c_enable_clk(struct udevice *dev)
+{
+	struct ocores_i2c_bus *bus = dev_get_priv(dev);
+	ulong clk_rate;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &bus->clk);
+	if (ret)
+		return -EINVAL;
+
+	ret = clk_enable(&bus->clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(&bus->clk);
+	if (!clk_rate)
+		return -EINVAL;
+
+	bus->ip_clk_khz = clk_rate / 1000;
+
+	clk_free(&bus->clk);
+
+	return 0;
+}
+
+static int ocores_init(struct udevice *dev, struct ocores_i2c_bus *bus)
+{
+	int prescale;
+	int diff;
+	u8 ctrl = oc_getreg(bus, OCI2C_CONTROL);
+
+	/* make sure the device is disabled */
+	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
+	oc_setreg(bus, OCI2C_CONTROL, ctrl);
+
+	prescale = (bus->ip_clk_khz / (5 * bus->bus_clk_khz)) - 1;
+	prescale = clamp(prescale, 0, 0xffff);
+
+	diff = bus->ip_clk_khz / (5 * (prescale + 1)) - bus->bus_clk_khz;
+	if (abs(diff) > bus->bus_clk_khz / 10) {
+		debug("Unsupported clock settings: core: %d KHz, bus: %d KHz\n",
+		      bus->ip_clk_khz, bus->bus_clk_khz);
+		return -EINVAL;
+	}
+
+	oc_setreg(bus, OCI2C_PRELOW, prescale & 0xff);
+	oc_setreg(bus, OCI2C_PREHIGH, prescale >> 8);
+
+	/* Init the device */
+	oc_setreg(bus, OCI2C_CMD, OCI2C_CMD_IACK);
+	oc_setreg(bus, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN);
+
+	return 0;
+}
+
+/*
+ * Read and write functions for the GRLIB port of the controller. Registers are
+ * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
+ * register. The subsequent registers have their offsets decreased accordingly.
+ */
+static u8 oc_getreg_grlib(struct ocores_i2c_bus *i2c, int reg)
+{
+	u32 rd;
+	int rreg = reg;
+
+	if (reg != OCI2C_PRELOW)
+		rreg--;
+	rd = in_be32(i2c->base + (rreg << i2c->reg_shift));
+	if (reg == OCI2C_PREHIGH)
+		return (u8)(rd >> 8);
+	else
+		return (u8)rd;
+}
+
+static void oc_setreg_grlib(struct ocores_i2c_bus *i2c, int reg, u8 value)
+{
+	u32 curr, wr;
+	int rreg = reg;
+
+	if (reg != OCI2C_PRELOW)
+		rreg--;
+	if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
+		curr = in_be32(i2c->base + (rreg << i2c->reg_shift));
+		if (reg == OCI2C_PRELOW)
+			wr = (curr & 0xff00) | value;
+		else
+			wr = (((u32)value) << 8) | (curr & 0xff);
+	} else {
+		wr = value;
+	}
+	out_be32(i2c->base + (rreg << i2c->reg_shift), wr);
+}
+
+static int ocores_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
+{
+	int prescale;
+	int diff;
+	struct ocores_i2c_bus *bus = dev_get_priv(dev);
+
+	/* speed in Khz */
+	speed = speed / 1000;
+
+	prescale = (bus->ip_clk_khz / (5 * speed)) - 1;
+	prescale = clamp(prescale, 0, 0xffff);
+
+	diff = bus->ip_clk_khz / (5 * (prescale + 1)) - speed;
+	if (abs(diff) > speed / 10) {
+		debug("Unsupported clock settings: core: %d KHz, bus: %d KHz\n",
+		      bus->ip_clk_khz, speed);
+		return -EINVAL;
+	}
+
+	oc_setreg(bus, OCI2C_PRELOW, prescale & 0xff);
+	oc_setreg(bus, OCI2C_PREHIGH, prescale >> 8);
+
+	bus->bus_clk_khz = speed;
+	return 0;
+}
+
+int ocores_i2c_get_bus_speed(struct udevice *dev)
+{
+	struct ocores_i2c_bus *bus = dev_get_priv(dev);
+
+	return (bus->bus_clk_khz * 1000);
+}
+
+static const struct dm_i2c_ops ocores_i2c_ops = {
+	.xfer		= ocores_i2c_xfer,
+	.set_bus_speed	= ocores_i2c_set_bus_speed,
+	.get_bus_speed	= ocores_i2c_get_bus_speed,
+};
+
+static int ocores_i2c_probe(struct udevice *dev)
+{
+	struct ocores_i2c_bus *bus = dev_get_priv(dev);
+	bool clock_frequency_present;
+	u32 val;
+	u32 clock_frequency_khz;
+	int ret;
+
+	bus->base = (void __iomem *)devfdt_get_addr(dev);
+
+	if (dev_read_u32(dev, "reg-shift", &bus->reg_shift)) {
+		/* no 'reg-shift', check for deprecated 'regstep' */
+		ret = dev_read_u32(dev, "regstep", &val);
+		if (ret) {
+			dev_err(dev,
+				"missing both reg-shift and regstep property: %d\n", ret);
+			return -EINVAL;
+		} else {
+			bus->reg_shift = ilog2(val);
+			dev_warn(dev,
+				 "regstep property deprecated, use reg-shift\n");
+		}
+	}
+
+	if (dev_read_u32(dev, "clock-frequency", &val)) {
+		bus->bus_clk_khz = 100;
+		clock_frequency_present = FALSE;
+	} else {
+		bus->bus_clk_khz = val / 1000;
+		clock_frequency_khz = val / 1000;
+		clock_frequency_present = TRUE;
+	}
+
+	ret = ocores_i2c_enable_clk(dev);
+	if (ret)
+		return ret;
+
+	if (bus->ip_clk_khz == 0) {
+		if (dev_read_u32(dev, "opencores,ip-clock-frequency", &val)) {
+			if (!clock_frequency_present) {
+				dev_err(dev,
+					"Missing required parameter 'opencores,ip-clock-frequency'\n");
+				clk_disable(&bus->clk);
+				return -ENODEV;
+			}
+
+			bus->ip_clk_khz = clock_frequency_khz;
+			dev_warn(dev,
+				 "Deprecated usage of the 'clock-frequency' property, please update to 'opencores,ip-clock-frequency'\n");
+		} else {
+			bus->ip_clk_khz = val / 1000;
+			if (clock_frequency_present)
+				bus->bus_clk_khz = clock_frequency_khz;
+		}
+	}
+
+	bus->reg_io_width = dev_read_u32_default(dev, "reg-io-width", 1);
+
+	if (dev_get_driver_data(dev) == TYPE_GRLIB) {
+		debug("GRLIB variant of i2c-ocores\n");
+		bus->setreg = oc_setreg_grlib;
+		bus->getreg = oc_getreg_grlib;
+	}
+
+	if (!bus->setreg || !bus->getreg) {
+		bool be = (cpu_to_be32(0x12345678) == 0x12345678);
+
+		switch (bus->reg_io_width) {
+		case 1:
+			bus->setreg = oc_setreg_8;
+			bus->getreg = oc_getreg_8;
+			break;
+
+		case 2:
+			bus->setreg = be ? oc_setreg_16be : oc_setreg_16;
+			bus->getreg = be ? oc_getreg_16be : oc_getreg_16;
+			break;
+
+		case 4:
+			bus->setreg = be ? oc_setreg_32be : oc_setreg_32;
+			bus->getreg = be ? oc_getreg_32be : oc_getreg_32;
+			break;
+
+		default:
+			debug("Unsupported I/O width (%d)\n",
+			      bus->reg_io_width);
+			ret = -EINVAL;
+			goto err_clk;
+		}
+	}
+
+	/*
+	 * Set OCORES_FLAG_BROKEN_IRQ to enable workaround for
+	 * FU540-C000 SoC in polling mode.
+	 * Since the SoC does have an interrupt, its DT has an interrupt
+	 * property - But this should be bypassed as the IRQ logic in this
+	 * SoC is broken.
+	 */
+
+	if (device_is_compatible(dev, "sifive,fu540-c000-i2c"))
+		bus->flags |= OCORES_FLAG_BROKEN_IRQ;
+
+	ret = ocores_init(dev, bus);
+	if (ret)
+		goto err_clk;
+
+	return 0;
+
+err_clk:
+	clk_disable(&bus->clk);
+	return ret;
+}
+
+static const struct udevice_id ocores_i2c_ids[] = {
+{ .compatible = "opencores,i2c-ocores", .data = TYPE_OCORES },
+{ .compatible = "aeroflexgaisler,i2cmst", .data = TYPE_GRLIB },
+{ .compatible = "sifive,fu540-c000-i2c" },
+{ .compatible = "sifive,i2c0" },
+};
+
+U_BOOT_DRIVER(i2c_ocores) = {
+	.name	= "i2c_ocores",
+	.id	= UCLASS_I2C,
+	.of_match = ocores_i2c_ids,
+	.probe = ocores_i2c_probe,
+	.priv_auto_alloc_size = sizeof(struct ocores_i2c_bus),
+	.ops	= &ocores_i2c_ops,
+};