Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86WIP/20Jul2020

- dm: core: Don't show an ACPI warning if there is no ordering
- x86: Enhance MTRR functionality to support multiple CPUs

13 files changed, 925 insertions, 186 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 27295ef384..ff4f06ed79 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -603,6 +603,13 @@ config SMP
 	  only one CPU will be enabled regardless of the number of CPUs
 	  available.
 
+config SMP_AP_WORK
+	bool
+	depends on SMP
+	help
+	 Allow APs to do other work after initialisation instead of going
+	 to sleep.
+
 config MAX_CPUS
 	int "Maximum number of CPUs permitted"
 	depends on SMP
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index ee0499f5d7..16e67e3da2 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -60,7 +60,7 @@ ifndef CONFIG_SYS_COREBOOT
 obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
 endif
 ifndef CONFIG_$(SPL_)X86_64
-obj-$(CONFIG_SMP) += mp_init.o
+obj-$(CONFIG_$(SPL_)SMP) += mp_init.o
 endif
 obj-y += mtrr.o
 obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/x86/cpu/apollolake/Kconfig b/arch/x86/cpu/apollolake/Kconfig
index 942f11f566..99d4e105c2 100644
--- a/arch/x86/cpu/apollolake/Kconfig
+++ b/arch/x86/cpu/apollolake/Kconfig
@@ -15,6 +15,7 @@ config INTEL_APOLLOLAKE
 	select TPL_PCH_SUPPORT
 	select PCH_SUPPORT
 	select P2SB
+	select SMP_AP_WORK
 	imply ENABLE_MRC_CACHE
 	imply AHCI_PCI
 	imply SCSI
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 98ed66e67d..69c14189d1 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -67,10 +67,13 @@ static const char *const x86_vendor_name[] = {
 
 int __weak x86_cleanup_before_linux(void)
 {
-#ifdef CONFIG_BOOTSTAGE_STASH
+	int ret;
+
+	ret = mp_park_aps();
+	if (ret)
+		return log_msg_ret("park", ret);
 	bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR,
 			CONFIG_BOOTSTAGE_STASH_SIZE);
-#endif
 
 	return 0;
 }
@@ -201,18 +204,19 @@ int last_stage_init(void)
 
 	write_tables();
 
-#ifdef CONFIG_GENERATE_ACPI_TABLE
-	fadt = acpi_find_fadt();
+	if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) {
+		fadt = acpi_find_fadt();
 
-	/* Don't touch ACPI hardware on HW reduced platforms */
-	if (fadt && !(fadt->flags & ACPI_FADT_HW_REDUCED_ACPI)) {
-		/*
-		 * Other than waiting for OSPM to request us to switch to ACPI
-		 * mode, do it by ourselves, since SMI will not be triggered.
-		 */
-		enter_acpi_mode(fadt->pm1a_cnt_blk);
+		/* Don't touch ACPI hardware on HW reduced platforms */
+		if (fadt && !(fadt->flags & ACPI_FADT_HW_REDUCED_ACPI)) {
+			/*
+			 * Other than waiting for OSPM to request us to switch
+			 * to ACPI * mode, do it by ourselves, since SMI will
+			 * not be triggered.
+			 */
+			enter_acpi_mode(fadt->pm1a_cnt_blk);
+		}
 	}
-#endif
 
 	return 0;
 }
@@ -220,19 +224,20 @@ int last_stage_init(void)
 
 static int x86_init_cpus(void)
 {
-#ifdef CONFIG_SMP
-	debug("Init additional CPUs\n");
-	x86_mp_init();
-#else
-	struct udevice *dev;
+	if (IS_ENABLED(CONFIG_SMP)) {
+		debug("Init additional CPUs\n");
+		x86_mp_init();
+	} else {
+		struct udevice *dev;
 
-	/*
-	 * This causes the cpu-x86 driver to be probed.
-	 * We don't check return value here as we want to allow boards
-	 * which have not been converted to use cpu uclass driver to boot.
-	 */
-	uclass_first_device(UCLASS_CPU, &dev);
-#endif
+		/*
+		 * This causes the cpu-x86 driver to be probed.
+		 * We don't check return value here as we want to allow boards
+		 * which have not been converted to use cpu uclass driver to
+		 * boot.
+		 */
+		uclass_first_device(UCLASS_CPU, &dev);
+	}
 
 	return 0;
 }
@@ -276,9 +281,8 @@ int reserve_arch(void)
 	if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE))
 		mrccache_reserve();
 
-#ifdef CONFIG_SEABIOS
-	high_table_reserve();
-#endif
+	if (IS_ENABLED(CONFIG_SEABIOS))
+		high_table_reserve();
 
 	if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
 		acpi_s3_reserve();
diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c
index a6a6afec8c..8f342dd06e 100644
--- a/arch/x86/cpu/i386/cpu.c
+++ b/arch/x86/cpu/i386/cpu.c
@@ -21,6 +21,7 @@
 #include <common.h>
 #include <cpu_func.h>
 #include <init.h>
+#include <log.h>
 #include <malloc.h>
 #include <spl.h>
 #include <asm/control_regs.h>
@@ -630,32 +631,15 @@ int cpu_jump_to_64bit_uboot(ulong target)
 	return -EFAULT;
 }
 
-#ifdef CONFIG_SMP
-static int enable_smis(struct udevice *cpu, void *unused)
-{
-	return 0;
-}
-
-static struct mp_flight_record mp_steps[] = {
-	MP_FR_BLOCK_APS(mp_init_cpu, NULL, mp_init_cpu, NULL),
-	/* Wait for APs to finish initialization before proceeding */
-	MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
-};
-
 int x86_mp_init(void)
 {
-	struct mp_params mp_params;
-
-	mp_params.parallel_microcode_load = 0,
-	mp_params.flight_plan = &mp_steps[0];
-	mp_params.num_records = ARRAY_SIZE(mp_steps);
-	mp_params.microcode_pointer = 0;
+	int ret;
 
-	if (mp_init(&mp_params)) {
+	ret = mp_init();
+	if (ret) {
 		printf("Warning: MP init failure\n");
-		return -EIO;
+		return log_ret(ret);
 	}
 
 	return 0;
 }
-#endif
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 7fde4ff7e1..d2f1ee38cf 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -15,6 +15,7 @@
 #include <asm/atomic.h>
 #include <asm/cpu.h>
 #include <asm/interrupt.h>
+#include <asm/io.h>
 #include <asm/lapic.h>
 #include <asm/microcode.h>
 #include <asm/mp.h>
@@ -31,29 +32,132 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Total CPUs include BSP */
-static int num_cpus;
+/*
+ * Setting up multiprocessing
+ *
+ * See https://www.intel.com/content/www/us/en/intelligent-systems/intel-boot-loader-development-kit/minimal-intel-architecture-boot-loader-paper.html
+ *
+ * Note that this file refers to the boot CPU (the one U-Boot is running on) as
+ * the BSP (BootStrap Processor) and the others as APs (Application Processors).
+ *
+ * This module works by loading some setup code into RAM at AP_DEFAULT_BASE and
+ * telling each AP to execute it. The code that each AP runs is in
+ * sipi_vector.S (see ap_start16) which includes a struct sipi_params at the
+ * end of it. Those parameters are set up by the C code.
+
+ * Setting up is handled by load_sipi_vector(). It inits the common block of
+ * parameters (sipi_params) which tell the APs what to do. This block includes
+ * microcode and the MTTRs (Memory-Type-Range Registers) from the main CPU.
+ * There is also an ap_count which each AP increments as it starts up, so the
+ * BSP can tell how many checked in.
+ *
+ * The APs are started with a SIPI (Startup Inter-Processor Interrupt) which
+ * tells an AP to start executing at a particular address, in this case
+ * AP_DEFAULT_BASE which contains the code copied from ap_start16. This protocol
+ * is handled by start_aps().
+ *
+ * After being started, each AP runs the code in ap_start16, switches to 32-bit
+ * mode, runs the code at ap_start, then jumps to c_handler which is ap_init().
+ * This runs a very simple 'flight plan' described in mp_steps(). This sets up
+ * the CPU and waits for further instructions by looking at its entry in
+ * ap_callbacks[]. Note that the flight plan is only actually run for each CPU
+ * in bsp_do_flight_plan(): once the BSP completes each flight record, it sets
+ * mp_flight_record->barrier to 1 to allow the APs to executed the record one
+ * by one.
+ *
+ * CPUS are numbered sequentially from 0 using the device tree:
+ *
+ *	cpus {
+ *		u-boot,dm-pre-reloc;
+ *		#address-cells = <1>;
+ *		#size-cells = <0>;
+ *
+ *		cpu@0 {
+ *			u-boot,dm-pre-reloc;
+ *			device_type = "cpu";
+ *			compatible = "intel,apl-cpu";
+ *			reg = <0>;
+ *			intel,apic-id = <0>;
+ *		};
+ *
+ *		cpu@1 {
+ *			device_type = "cpu";
+ *			compatible = "intel,apl-cpu";
+ *			reg = <1>;
+ *			intel,apic-id = <2>;
+ *		};
+ *
+ * Here the 'reg' property is the CPU number and then is placed in dev->req_seq
+ * so that we can index into ap_callbacks[] using that. The APIC ID is different
+ * and may not be sequential (it typically is if hyperthreading is supported).
+ *
+ * Once APs are inited they wait in ap_wait_for_instruction() for instructions.
+ * Instructions come in the form of a function to run. This logic is in
+ * mp_run_on_cpus() which supports running on any one AP, all APs, just the BSP
+ * or all CPUs. The BSP logic is handled directly in mp_run_on_cpus(), by
+ * calling the function. For the APs, callback information is stored in a
+ * single, common struct mp_callback and a pointer to this is written to each
+ * AP's slot in ap_callbacks[] by run_ap_work(). All APs get the message even
+ * if it is only for one of them. When an AP notices a message it checks whether
+ * it should call the function (see check in ap_wait_for_instruction()) and then
+ * does so if needed. After that it sets its slot to NULL to indicate it is
+ * done.
+ *
+ * While U-Boot is running it can use mp_run_on_cpus() to run code on the APs.
+ * An example of this is the 'mtrr' command which allows reading and changing
+ * the MTRRs on all CPUs.
+ *
+ * Before U-Boot exits it calls mp_park_aps() which tells all CPUs to halt by
+ * executing a 'hlt' instruction. That allows them to be used by Linux when it
+ * starts up.
+ */
 
 /* This also needs to match the sipi.S assembly code for saved MSR encoding */
-struct saved_msr {
+struct __packed saved_msr {
 	uint32_t index;
 	uint32_t lo;
 	uint32_t hi;
-} __packed;
-
+};
 
+/**
+ * struct mp_flight_plan - Holds the flight plan
+ *
+ * @num_records: Number of flight records
+ * @records: Pointer to each record
+ */
 struct mp_flight_plan {
 	int num_records;
 	struct mp_flight_record *records;
 };
 
+/**
+ * struct mp_callback - Callback information for APs
+ *
+ * @func: Function to run
+ * @arg: Argument to pass to the function
+ * @logical_cpu_number: Either a CPU number (i.e. dev->req_seq) or a special
+ *	value like MP_SELECT_BSP. It tells the AP whether it should process this
+ *	callback
+ */
+struct mp_callback {
+	mp_run_func func;
+	void *arg;
+	int logical_cpu_number;
+};
+
+/* Stores the flight plan so that APs can find it */
 static struct mp_flight_plan mp_info;
 
-struct cpu_map {
-	struct udevice *dev;
-	int apic_id;
-	int err_code;
-};
+/*
+ * ap_callbacks - Callback mailbox array
+ *
+ * Array of callback, one entry for each available CPU, indexed by the CPU
+ * number, which is dev->req_seq. The entry for the main CPU is never used.
+ * When this is NULL, there is no pending work for the CPU to run. When
+ * non-NULL it points to the mp_callback structure. This is shared between all
+ * CPUs, so should only be written by the main CPU.
+ */
+static struct mp_callback **ap_callbacks;
 
 static inline void barrier_wait(atomic_t *b)
 {
@@ -151,11 +255,12 @@ static void ap_init(unsigned int cpu_index)
 	debug("AP: slot %d apic_id %x, dev %s\n", cpu_index, apic_id,
 	      dev ? dev->name : "(apic_id not found)");
 
-	/* Walk the flight plan */
+	/*
+	 * Walk the flight plan, which only returns if CONFIG_SMP_AP_WORK is not
+	 * enabled
+	 */
 	ap_do_flight_plan(dev);
 
-	/* Park the AP */
-	debug("parking\n");
 done:
 	stop_this_cpu();
 }
@@ -309,13 +414,26 @@ static int apic_wait_timeout(int total_delay, const char *msg)
 	return 0;
 }
 
-static int start_aps(int ap_count, atomic_t *num_aps)
+/**
+ * start_aps() - Start up the APs and count how many we find
+ *
+ * This is called on the boot processor to start up all the other processors
+ * (here called APs).
+ *
+ * @num_aps: Number of APs we expect to find
+ * @ap_count: Initially zero. Incremented by this function for each AP found
+ * @return 0 if all APs were set up correctly or there are none to set up,
+ *	-ENOSPC if the SIPI vector is too high in memory,
+ *	-ETIMEDOUT if the ICR is busy or the second SIPI fails to complete
+ *	-EIO if not all APs check in correctly
+ */
+static int start_aps(int num_aps, atomic_t *ap_count)
 {
 	int sipi_vector;
 	/* Max location is 4KiB below 1MiB */
 	const int max_vector_loc = ((1 << 20) - (1 << 12)) >> 12;
 
-	if (ap_count == 0)
+	if (num_aps == 0)
 		return 0;
 
 	/* The vector is sent as a 4k aligned address in one byte */
@@ -327,7 +445,7 @@ static int start_aps(int ap_count, atomic_t *num_aps)
 		return -ENOSPC;
 	}
 
-	debug("Attempting to start %d APs\n", ap_count);
+	debug("Attempting to start %d APs\n", num_aps);
 
 	if (apic_wait_timeout(1000, "ICR not to be busy"))
 		return -ETIMEDOUT;
@@ -350,7 +468,7 @@ static int start_aps(int ap_count, atomic_t *num_aps)
 		return -ETIMEDOUT;
 
 	/* Wait for CPUs to check in up to 200 us */
-	wait_for_aps(num_aps, ap_count, 200, 15);
+	wait_for_aps(ap_count, num_aps, 200, 15);
 
 	/* Send 2nd SIPI */
 	if (apic_wait_timeout(1000, "ICR not to be busy"))
@@ -363,25 +481,35 @@ static int start_aps(int ap_count, atomic_t *num_aps)
 		return -ETIMEDOUT;
 
 	/* Wait for CPUs to check in */
-	if (wait_for_aps(num_aps, ap_count, 10000, 50)) {
+	if (wait_for_aps(ap_count, num_aps, 10000, 50)) {
 		debug("Not all APs checked in: %d/%d\n",
-		      atomic_read(num_aps), ap_count);
+		      atomic_read(ap_count), num_aps);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params)
+/**
+ * bsp_do_flight_plan() - Do the flight plan on the BSP
+ *
+ * This runs the flight plan on the main CPU used to boot U-Boot
+ *
+ * @cpu: Device for the main CPU
+ * @plan: Flight plan to run
+ * @num_aps: Number of APs (CPUs other than the BSP)
+ * @returns 0 on success, -ETIMEDOUT if an AP failed to come up
+ */
+static int bsp_do_flight_plan(struct udevice *cpu, struct mp_flight_plan *plan,
+			      int num_aps)
 {
 	int i;
 	int ret = 0;
 	const int timeout_us = 100000;
 	const int step_us = 100;
-	int num_aps = num_cpus - 1;
 
-	for (i = 0; i < mp_params->num_records; i++) {
-		struct mp_flight_record *rec = &mp_params->flight_plan[i];
+	for (i = 0; i < plan->num_records; i++) {
+		struct mp_flight_record *rec = &plan->records[i];
 
 		/* Wait for APs if the record is not released */
 		if (atomic_read(&rec->barrier) == 0) {
@@ -398,12 +526,22 @@ static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params)
 
 		release_barrier(&rec->barrier);
 	}
+
 	return ret;
 }
 
-static int init_bsp(struct udevice **devp)
+/**
+ * get_bsp() - Get information about the bootstrap processor
+ *
+ * @devp: If non-NULL, returns CPU device corresponding to the BSP
+ * @cpu_countp: If non-NULL, returns the total number of CPUs
+ * @return CPU number of the BSP, or -ve on error. If multiprocessing is not
+ *	enabled, returns 0
+ */
+static int get_bsp(struct udevice **devp, int *cpu_countp)
 {
 	char processor_name[CPU_MAX_NAME_LEN];
+	struct udevice *dev;
 	int apic_id;
 	int ret;
 
@@ -411,61 +549,333 @@ static int init_bsp(struct udevice **devp)
 	debug("CPU: %s\n", processor_name);
 
 	apic_id = lapicid();
-	ret = find_cpu_by_apic_id(apic_id, devp);
-	if (ret) {
+	ret = find_cpu_by_apic_id(apic_id, &dev);
+	if (ret < 0) {
 		printf("Cannot find boot CPU, APIC ID %d\n", apic_id);
 		return ret;
 	}
+	ret = cpu_get_count(dev);
+	if (ret < 0)
+		return log_msg_ret("count", ret);
+	if (devp)
+		*devp = dev;
+	if (cpu_countp)
+		*cpu_countp = ret;
+
+	return dev->req_seq >= 0 ? dev->req_seq : 0;
+}
+
+/**
+ * read_callback() - Read the pointer in a callback slot
+ *
+ * This is called by APs to read their callback slot to see if there is a
+ * pointer to new instructions
+ *
+ * @slot: Pointer to the AP's callback slot
+ * @return value of that pointer
+ */
+static struct mp_callback *read_callback(struct mp_callback **slot)
+{
+	dmb();
+
+	return *slot;
+}
+
+/**
+ * store_callback() - Store a pointer to the callback slot
+ *
+ * This is called by APs to write NULL into the callback slot when they have
+ * finished the work requested by the BSP.
+ *
+ * @slot: Pointer to the AP's callback slot
+ * @val: Value to write (e.g. NULL)
+ */
+static void store_callback(struct mp_callback **slot, struct mp_callback *val)
+{
+	*slot = val;
+	dmb();
+}
+
+/**
+ * run_ap_work() - Run a callback on selected APs
+ *
+ * This writes @callback to all APs and waits for them all to acknowledge it,
+ * Note that whether each AP actually calls the callback depends on the value
+ * of logical_cpu_number (see struct mp_callback). The logical CPU number is
+ * the CPU device's req->seq value.
+ *
+ * @callback: Callback information to pass to all APs
+ * @bsp: CPU device for the BSP
+ * @num_cpus: The number of CPUs in the system (= number of APs + 1)
+ * @expire_ms: Timeout to wait for all APs to finish, in milliseconds, or 0 for
+ *	no timeout
+ * @return 0 if OK, -ETIMEDOUT if one or more APs failed to respond in time
+ */
+static int run_ap_work(struct mp_callback *callback, struct udevice *bsp,
+		       int num_cpus, uint expire_ms)
+{
+	int cur_cpu = bsp->req_seq;
+	int num_aps = num_cpus - 1; /* number of non-BSPs to get this message */
+	int cpus_accepted;
+	ulong start;
+	int i;
+
+	if (!IS_ENABLED(CONFIG_SMP_AP_WORK)) {
+		printf("APs already parked. CONFIG_SMP_AP_WORK not enabled\n");
+		return -ENOTSUPP;
+	}
+
+	/* Signal to all the APs to run the func. */
+	for (i = 0; i < num_cpus; i++) {
+		if (cur_cpu != i)
+			store_callback(&ap_callbacks[i], callback);
+	}
+	mfence();
+
+	/* Wait for all the APs to signal back that call has been accepted. */
+	start = get_timer(0);
+
+	do {
+		mdelay(1);
+		cpus_accepted = 0;
+
+		for (i = 0; i < num_cpus; i++) {
+			if (cur_cpu == i)
+				continue;
+			if (!read_callback(&ap_callbacks[i]))
+				cpus_accepted++;
+		}
+
+		if (expire_ms && get_timer(start) >= expire_ms) {
+			log(UCLASS_CPU, LOGL_CRIT,
+			    "AP call expired; %d/%d CPUs accepted\n",
+			    cpus_accepted, num_aps);
+			return -ETIMEDOUT;
+		}
+	} while (cpus_accepted != num_aps);
+
+	/* Make sure we can see any data written by the APs */
+	mfence();
 
 	return 0;
 }
 
-int mp_init(struct mp_params *p)
+/**
+ * ap_wait_for_instruction() - Wait for and process requests from the main CPU
+ *
+ * This is called by APs (here, everything other than the main boot CPU) to
+ * await instructions. They arrive in the form of a function call and argument,
+ * which is then called. This uses a simple mailbox with atomic read/set
+ *
+ * @cpu: CPU that is waiting
+ * @unused: Optional argument provided by struct mp_flight_record, not used here
+ * @return Does not return
+ */
+static int ap_wait_for_instruction(struct udevice *cpu, void *unused)
 {
-	int num_aps;
-	atomic_t *ap_count;
-	struct udevice *cpu;
+	struct mp_callback lcb;
+	struct mp_callback **per_cpu_slot;
+
+	if (!IS_ENABLED(CONFIG_SMP_AP_WORK))
+		return 0;
+
+	per_cpu_slot = &ap_callbacks[cpu->req_seq];
+
+	while (1) {
+		struct mp_callback *cb = read_callback(per_cpu_slot);
+
+		if (!cb) {
+			asm ("pause");
+			continue;
+		}
+
+		/* Copy to local variable before using the value */
+		memcpy(&lcb, cb, sizeof(lcb));
+		mfence();
+		if (lcb.logical_cpu_number == MP_SELECT_ALL ||
+		    lcb.logical_cpu_number == MP_SELECT_APS ||
+		    cpu->req_seq == lcb.logical_cpu_number)
+			lcb.func(lcb.arg);
+
+		/* Indicate we are finished */
+		store_callback(per_cpu_slot, NULL);
+	}
+
+	return 0;
+}
+
+static int mp_init_cpu(struct udevice *cpu, void *unused)
+{
+	struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
+
+	plat->ucode_version = microcode_read_rev();
+	plat->device_id = gd->arch.x86_device;
+
+	return device_probe(cpu);
+}
+
+static struct mp_flight_record mp_steps[] = {
+	MP_FR_BLOCK_APS(mp_init_cpu, NULL, mp_init_cpu, NULL),
+	MP_FR_BLOCK_APS(ap_wait_for_instruction, NULL, NULL, NULL),
+};
+
+int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg)
+{
+	struct mp_callback lcb = {
+		.func = func,
+		.arg = arg,
+		.logical_cpu_number = cpu_select,
+	};
+	struct udevice *dev;
+	int num_cpus;
 	int ret;
 
-	/* This will cause the CPUs devices to be bound */
-	struct uclass *uc;
-	ret = uclass_get(UCLASS_CPU, &uc);
+	ret = get_bsp(&dev, &num_cpus);
+	if (ret < 0)
+		return log_msg_ret("bsp", ret);
+	if (cpu_select == MP_SELECT_ALL || cpu_select == MP_SELECT_BSP ||
+	    cpu_select == ret) {
+		/* Run on BSP first */
+		func(arg);
+	}
+
+	if (!IS_ENABLED(CONFIG_SMP_AP_WORK) ||
+	    !(gd->flags & GD_FLG_SMP_READY)) {
+		/* Allow use of this function on the BSP only */
+		if (cpu_select == MP_SELECT_BSP || !cpu_select)
+			return 0;
+		return -ENOTSUPP;
+	}
+
+	/* Allow up to 1 second for all APs to finish */
+	ret = run_ap_work(&lcb, dev, num_cpus, 1000 /* ms */);
+	if (ret)
+		return log_msg_ret("aps", ret);
+
+	return 0;
+}
+
+static void park_this_cpu(void *unused)
+{
+	stop_this_cpu();
+}
+
+int mp_park_aps(void)
+{
+	int ret;
+
+	ret = mp_run_on_cpus(MP_SELECT_APS, park_this_cpu, NULL);
 	if (ret)
+		return log_ret(ret);
+
+	return 0;
+}
+
+int mp_first_cpu(int cpu_select)
+{
+	struct udevice *dev;
+	int num_cpus;
+	int ret;
+
+	/*
+	 * This assumes that CPUs are numbered from 0. This function tries to
+	 * avoid assuming the CPU 0 is the boot CPU
+	 */
+	if (cpu_select == MP_SELECT_ALL)
+		return 0;   /* start with the first one */
+
+	ret = get_bsp(&dev, &num_cpus);
+	if (ret < 0)
+		return log_msg_ret("bsp", ret);
+
+	/* Return boot CPU if requested */
+	if (cpu_select == MP_SELECT_BSP)
 		return ret;
 
+	/* Return something other than the boot CPU, if APs requested */
+	if (cpu_select == MP_SELECT_APS && num_cpus > 1)
+		return ret == 0 ? 1 : 0;
+
+	/* Try to check for an invalid value */
+	if (cpu_select < 0 || cpu_select >= num_cpus)
+		return -EINVAL;
+
+	return cpu_select;  /* return the only selected one */
+}
+
+int mp_next_cpu(int cpu_select, int prev_cpu)
+{
+	struct udevice *dev;
+	int num_cpus;
+	int ret;
+	int bsp;
+
+	/* If we selected the BSP or a particular single CPU, we are done */
+	if (!IS_ENABLED(CONFIG_SMP_AP_WORK) || cpu_select == MP_SELECT_BSP ||
+	    cpu_select >= 0)
+		return -EFBIG;
+
+	/* Must be doing MP_SELECT_ALL or MP_SELECT_APS; return the next CPU */
+	ret = get_bsp(&dev, &num_cpus);
+	if (ret < 0)
+		return log_msg_ret("bsp", ret);
+	bsp = ret;
+
+	/* Move to the next CPU */
+	assert(prev_cpu >= 0);
+	ret = prev_cpu + 1;
+
+	/* Skip the BSP if needed */
+	if (cpu_select == MP_SELECT_APS && ret == bsp)
+		ret++;
+	if (ret >= num_cpus)
+		return -EFBIG;
+
+	return ret;
+}
+
+int mp_init(void)
+{
+	int num_aps, num_cpus;
+	atomic_t *ap_count;
+	struct udevice *cpu;
+	struct uclass *uc;
+	int ret;
+
 	if (IS_ENABLED(CONFIG_QFW)) {
 		ret = qemu_cpu_fixup();
 		if (ret)
 			return ret;
 	}
 
-	ret = init_bsp(&cpu);
-	if (ret) {
+	/*
+	 * Multiple APs are brought up simultaneously and they may get the same
+	 * seq num in the uclass_resolve_seq() during device_probe(). To avoid
+	 * this, set req_seq to the reg number in the device tree in advance.
+	 */
+	uclass_id_foreach_dev(UCLASS_CPU, cpu, uc)
+		cpu->req_seq = dev_read_u32_default(cpu, "reg", -1);
+
+	ret = get_bsp(&cpu, &num_cpus);
+	if (ret < 0) {
 		debug("Cannot init boot CPU: err=%d\n", ret);
 		return ret;
 	}
 
-	if (p == NULL || p->flight_plan == NULL || p->num_records < 1) {
-		printf("Invalid MP parameters\n");
-		return -EINVAL;
-	}
-
-	num_cpus = cpu_get_count(cpu);
-	if (num_cpus < 0) {
-		debug("Cannot get number of CPUs: err=%d\n", num_cpus);
-		return num_cpus;
-	}
-
 	if (num_cpus < 2)
 		debug("Warning: Only 1 CPU is detected\n");
 
 	ret = check_cpu_devices(num_cpus);
 	if (ret)
-		debug("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n");
+		log_warning("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n");
+
+	ap_callbacks = calloc(num_cpus, sizeof(struct mp_callback *));
+	if (!ap_callbacks)
+		return -ENOMEM;
 
 	/* Copy needed parameters so that APs have a reference to the plan */
-	mp_info.num_records = p->num_records;
-	mp_info.records = p->flight_plan;
+	mp_info.num_records = ARRAY_SIZE(mp_steps);
+	mp_info.records = mp_steps;
 
 	/* Load the SIPI vector */
 	ret = load_sipi_vector(&ap_count, num_cpus);
@@ -489,28 +899,12 @@ int mp_init(struct mp_params *p)
 	}
 
 	/* Walk the flight plan for the BSP */
-	ret = bsp_do_flight_plan(cpu, p);
+	ret = bsp_do_flight_plan(cpu, &mp_info, num_aps);
 	if (ret) {
 		debug("CPU init failed: err=%d\n", ret);
 		return ret;
 	}
+	gd->flags |= GD_FLG_SMP_READY;
 
 	return 0;
 }
-
-int mp_init_cpu(struct udevice *cpu, void *unused)
-{
-	struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
-
-	/*
-	 * Multiple APs are brought up simultaneously and they may get the same
-	 * seq num in the uclass_resolve_seq() during device_probe(). To avoid
-	 * this, set req_seq to the reg number in the device tree in advance.
-	 */
-	cpu->req_seq = fdtdec_get_int(gd->fdt_blob, dev_of_offset(cpu), "reg",
-				      -1);
-	plat->ucode_version = microcode_read_rev();
-	plat->device_id = gd->arch.x86_device;
-
-	return device_probe(cpu);
-}
diff --git a/arch/x86/cpu/mtrr.c b/arch/x86/cpu/mtrr.c
index 7ec0733337..2468d88a80 100644
--- a/arch/x86/cpu/mtrr.c
+++ b/arch/x86/cpu/mtrr.c
@@ -21,6 +21,7 @@
 #include <log.h>
 #include <asm/cache.h>
 #include <asm/io.h>
+#include <asm/mp.h>
 #include <asm/msr.h>
 #include <asm/mtrr.h>
 
@@ -63,10 +64,71 @@ static void set_var_mtrr(uint reg, uint type, uint64_t start, uint64_t size)
 	wrmsrl(MTRR_PHYS_MASK_MSR(reg), mask | MTRR_PHYS_MASK_VALID);
 }
 
+void mtrr_read_all(struct mtrr_info *info)
+{
+	int i;
+
+	for (i = 0; i < MTRR_COUNT; i++) {
+		info->mtrr[i].base = native_read_msr(MTRR_PHYS_BASE_MSR(i));
+		info->mtrr[i].mask = native_read_msr(MTRR_PHYS_MASK_MSR(i));
+	}
+}
+
+void mtrr_write_all(struct mtrr_info *info)
+{
+	struct mtrr_state state;
+	int i;
+
+	for (i = 0; i < MTRR_COUNT; i++) {
+		mtrr_open(&state, true);
+		wrmsrl(MTRR_PHYS_BASE_MSR(i), info->mtrr[i].base);
+		wrmsrl(MTRR_PHYS_MASK_MSR(i), info->mtrr[i].mask);
+		mtrr_close(&state, true);
+	}
+}
+
+static void write_mtrrs(void *arg)
+{
+	struct mtrr_info *info = arg;
+
+	mtrr_write_all(info);
+}
+
+static void read_mtrrs(void *arg)
+{
+	struct mtrr_info *info = arg;
+
+	mtrr_read_all(info);
+}
+
+/**
+ * mtrr_copy_to_aps() - Copy the MTRRs from the boot CPU to other CPUs
+ *
+ * @return 0 on success, -ve on failure
+ */
+static int mtrr_copy_to_aps(void)
+{
+	struct mtrr_info info;
+	int ret;
+
+	ret = mp_run_on_cpus(MP_SELECT_BSP, read_mtrrs, &info);
+	if (ret == -ENXIO)
+		return 0;
+	else if (ret)
+		return log_msg_ret("bsp", ret);
+
+	ret = mp_run_on_cpus(MP_SELECT_APS, write_mtrrs, &info);
+	if (ret)
+		return log_msg_ret("bsp", ret);
+
+	return 0;
+}
+
 int mtrr_commit(bool do_caches)
 {
 	struct mtrr_request *req = gd->arch.mtrr_req;
 	struct mtrr_state state;
+	int ret;
 	int i;
 
 	debug("%s: enabled=%d, count=%d\n", __func__, gd->arch.has_mtrr,
@@ -88,6 +150,12 @@ int mtrr_commit(bool do_caches)
 	mtrr_close(&state, do_caches);
 	debug("mtrr done\n");
 
+	if (gd->flags & GD_FLG_RELOC) {
+		ret = mtrr_copy_to_aps();
+		if (ret)
+			return log_msg_ret("copy", ret);
+	}
+
 	return 0;
 }
 
@@ -153,3 +221,84 @@ int mtrr_set_next_var(uint type, uint64_t start, uint64_t size)
 
 	return 0;
 }
+
+/** enum mtrr_opcode - supported operations for mtrr_do_oper() */
+enum mtrr_opcode {
+	MTRR_OP_SET,
+	MTRR_OP_SET_VALID,
+};
+
+/**
+ * struct mtrr_oper - An MTRR operation to perform on a CPU
+ *
+ * @opcode: Indicates operation to perform
+ * @reg: MTRR reg number to select (0-7, -1 = all)
+ * @valid: Valid value to write for MTRR_OP_SET_VALID
+ * @base: Base value to write for MTRR_OP_SET
+ * @mask: Mask value to write for MTRR_OP_SET
+ */
+struct mtrr_oper {
+	enum mtrr_opcode opcode;
+	int reg;
+	bool valid;
+	u64 base;
+	u64 mask;
+};
+
+static void mtrr_do_oper(void *arg)
+{
+	struct mtrr_oper *oper = arg;
+	u64 mask;
+
+	switch (oper->opcode) {
+	case MTRR_OP_SET_VALID:
+		mask = native_read_msr(MTRR_PHYS_MASK_MSR(oper->reg));
+		if (oper->valid)
+			mask |= MTRR_PHYS_MASK_VALID;
+		else
+			mask &= ~MTRR_PHYS_MASK_VALID;
+		wrmsrl(MTRR_PHYS_MASK_MSR(oper->reg), mask);
+		break;
+	case MTRR_OP_SET:
+		wrmsrl(MTRR_PHYS_BASE_MSR(oper->reg), oper->base);
+		wrmsrl(MTRR_PHYS_MASK_MSR(oper->reg), oper->mask);
+		break;
+	}
+}
+
+static int mtrr_start_op(int cpu_select, struct mtrr_oper *oper)
+{
+	struct mtrr_state state;
+	int ret;
+
+	mtrr_open(&state, true);
+	ret = mp_run_on_cpus(cpu_select, mtrr_do_oper, oper);
+	mtrr_close(&state, true);
+	if (ret)
+		return log_msg_ret("run", ret);
+
+	return 0;
+}
+
+int mtrr_set_valid(int cpu_select, int reg, bool valid)
+{
+	struct mtrr_oper oper;
+
+	oper.opcode = MTRR_OP_SET_VALID;
+	oper.reg = reg;
+	oper.valid = valid;
+
+	return mtrr_start_op(cpu_select, &oper);
+}
+
+int mtrr_set(int cpu_select, int reg, u64 base, u64 mask)
+{
+	struct mtrr_oper oper;
+
+	oper.opcode = MTRR_OP_SET;
+	oper.reg = reg;
+	oper.base = base;
+	oper.mask = mask;
+
+	return mtrr_start_op(cpu_select, &oper);
+}
diff --git a/arch/x86/include/asm/mp.h b/arch/x86/include/asm/mp.h
index 9dddf88b5a..5f9b8c6564 100644
--- a/arch/x86/include/asm/mp.h
+++ b/arch/x86/include/asm/mp.h
@@ -11,6 +11,17 @@
 #include <asm/atomic.h>
 #include <asm/cache.h>
 
+enum {
+	/* Indicates that the function should run on all CPUs */
+	MP_SELECT_ALL	= -1,
+
+	/* Run on boot CPUs */
+	MP_SELECT_BSP	= -2,
+
+	/* Run on non-boot CPUs */
+	MP_SELECT_APS	= -3,
+};
+
 typedef int (*mp_callback_t)(struct udevice *cpu, void *arg);
 
 /*
@@ -25,6 +36,14 @@ typedef int (*mp_callback_t)(struct udevice *cpu, void *arg);
  *
  * Note that ap_call() and bsp_call() can be NULL. In the NULL case the
  * callback will just not be called.
+ *
+ * @barrier: Ensures that the BSP and AP don't run the flight record at the same
+ *	time
+ * @cpus_entered: Counts the number of APs that have run this record
+ * @ap_call: Function for the APs to call
+ * @ap_arg: Argument to pass to @ap_call
+ * @bsp_call: Function for the BSP to call
+ * @bsp_arg: Argument to pass to @bsp_call
  */
 struct mp_flight_record {
 	atomic_t barrier;
@@ -52,21 +71,6 @@ struct mp_flight_record {
 	MP_FLIGHT_RECORD(1, ap_func, ap_arg, bsp_func, bsp_arg)
 
 /*
- * The mp_params structure provides the arguments to the mp subsystem
- * for bringing up APs.
- *
- * At present this is overkill for U-Boot, but it may make it easier to add
- * SMM support.
- */
-struct mp_params {
-	int parallel_microcode_load;
-	const void *microcode_pointer;
-	/* Flight plan  for APs and BSP */
-	struct mp_flight_record *flight_plan;
-	int num_records;
-};
-
-/*
  * mp_init() will set up the SIPI vector and bring up the APs according to
  * mp_params. Each flight record will be executed according to the plan. Note
  * that the MP infrastructure uses SMM default area without saving it. It's
@@ -85,12 +89,105 @@ struct mp_params {
  *
  * mp_init() returns < 0 on error, 0 on success.
  */
-int mp_init(struct mp_params *params);
+int mp_init(void);
 
-/* Probes the CPU device */
-int mp_init_cpu(struct udevice *cpu, void *unused);
-
-/* Set up additional CPUs */
+/**
+ * x86_mp_init() - Set up additional CPUs
+ *
+ * @returns < 0 on error, 0 on success.
+ */
 int x86_mp_init(void);
 
+/**
+ * mp_run_func() - Function to call on the AP
+ *
+ * @arg: Argument to pass
+ */
+typedef void (*mp_run_func)(void *arg);
+
+#if CONFIG_IS_ENABLED(SMP) && !CONFIG_IS_ENABLED(X86_64)
+/**
+ * mp_run_on_cpus() - Run a function on one or all CPUs
+ *
+ * This does not return until all CPUs have completed the work
+ *
+ * Running on anything other than the boot CPU is only supported if
+ * CONFIG_SMP_AP_WORK is enabled
+ *
+ * @cpu_select: CPU to run on (its dev->req_seq value), or MP_SELECT_ALL for
+ *	all, or MP_SELECT_BSP for BSP
+ * @func: Function to run
+ * @arg: Argument to pass to the function
+ * @return 0 on success, -ve on error
+ */
+int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg);
+
+/**
+ * mp_park_aps() - Park the APs ready for the OS
+ *
+ * This halts all CPUs except the main one, ready for the OS to use them
+ *
+ * @return 0 if OK, -ve on error
+ */
+int mp_park_aps(void);
+
+/**
+ * mp_first_cpu() - Get the first CPU to process, from a selection
+ *
+ * This is used to iterate through selected CPUs. Call this function first, then
+ * call mp_next_cpu() repeatedly (with the same @cpu_select) until it returns
+ * -EFBIG.
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @return next CPU number to run on (e.g. 0)
+ */
+int mp_first_cpu(int cpu_select);
+
+/**
+ * mp_next_cpu() - Get the next CPU to process, from a selection
+ *
+ * This is used to iterate through selected CPUs. After first calling
+ * mp_first_cpu() once, call this function repeatedly until it returns -EFBIG.
+ *
+ * The value of @cpu_select must be the same for all calls and must match the
+ * value passed to mp_first_cpu(), otherwise the behaviour is undefined.
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @prev_cpu: Previous value returned by mp_first_cpu()/mp_next_cpu()
+ * @return next CPU number to run on (e.g. 0)
+ */
+int mp_next_cpu(int cpu_select, int prev_cpu);
+#else
+static inline int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg)
+{
+	/* There is only one CPU, so just call the function here */
+	func(arg);
+
+	return 0;
+}
+
+static inline int mp_park_aps(void)
+{
+	/* No APs to park */
+
+	return 0;
+}
+
+static inline int mp_first_cpu(int cpu_select)
+{
+	/* We cannot run on any APs, nor a selected CPU */
+	return cpu_select == MP_SELECT_APS ? -EFBIG : MP_SELECT_BSP;
+}
+
+static inline int mp_next_cpu(int cpu_select, int prev_cpu)
+{
+	/*
+	 * When MP is not enabled, there is only one CPU and we did it in
+	 * mp_first_cpu()
+	 */
+	return -EFBIG;
+}
+
+#endif
+
 #endif /* _X86_MP_H_ */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index 212a699c1b..48db1dd82f 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -71,6 +71,26 @@ struct mtrr_state {
 };
 
 /**
+ * struct mtrr - Information about a single MTRR
+ *
+ * @base: Base address and MTRR_BASE_TYPE_MASK
+ * @mask: Mask and MTRR_PHYS_MASK_VALID
+ */
+struct mtrr {
+	u64 base;
+	u64 mask;
+};
+
+/**
+ * struct mtrr_info - Information about all MTRRs
+ *
+ * @mtrr: Information about each mtrr
+ */
+struct mtrr_info {
+	struct mtrr mtrr[MTRR_COUNT];
+};
+
+/**
  * mtrr_open() - Prepare to adjust MTRRs
  *
  * Use mtrr_open() passing in a structure - this function will init it. Then
@@ -129,6 +149,37 @@ int mtrr_commit(bool do_caches);
  */
 int mtrr_set_next_var(uint type, uint64_t base, uint64_t size);
 
+/**
+ * mtrr_read_all() - Save all the MTRRs
+ *
+ * This reads all MTRRs from the boot CPU into a struct so they can be loaded
+ * onto other CPUs
+ *
+ * @info: Place to put the MTRR info
+ */
+void mtrr_read_all(struct mtrr_info *info);
+
+/**
+ * mtrr_set_valid() - Set the valid flag for a selected MTRR and CPU(s)
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @reg: MTRR register to write (0-7)
+ * @valid: Valid flag to write
+ * @return 0 on success, -ve on error
+ */
+int mtrr_set_valid(int cpu_select, int reg, bool valid);
+
+/**
+ * mtrr_set() - Set the valid flag for a selected MTRR and CPU(s)
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @reg: MTRR register to write (0-7)
+ * @base: Base address and MTRR_BASE_TYPE_MASK
+ * @mask: Mask and MTRR_PHYS_MASK_VALID
+ * @return 0 on success, -ve on error
+ */
+int mtrr_set(int cpu_select, int reg, u64 base, u64 mask);
+
 #endif
 
 #if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE - 1)) != 0)
diff --git a/cmd/x86/mtrr.c b/cmd/x86/mtrr.c
index 084d7315f4..e118bba5a2 100644
--- a/cmd/x86/mtrr.c
+++ b/cmd/x86/mtrr.c
@@ -5,7 +5,9 @@
 
 #include <common.h>
 #include <command.h>
+#include <log.h>
 #include <asm/msr.h>
+#include <asm/mp.h>
 #include <asm/mtrr.h>
 
 static const char *const mtrr_type_name[MTRR_TYPE_COUNT] = {
@@ -18,19 +20,32 @@ static const char *const mtrr_type_name[MTRR_TYPE_COUNT] = {
 	"Back",
 };
 
-static int do_mtrr_list(void)
+static void read_mtrrs(void *arg)
 {
+	struct mtrr_info *info = arg;
+
+	mtrr_read_all(info);
+}
+
+static int do_mtrr_list(int cpu_select)
+{
+	struct mtrr_info info;
+	int ret;
 	int i;
 
 	printf("Reg Valid Write-type   %-16s %-16s %-16s\n", "Base   ||",
 	       "Mask   ||", "Size   ||");
+	memset(&info, '\0', sizeof(info));
+	ret = mp_run_on_cpus(cpu_select, read_mtrrs, &info);
+	if (ret)
+		return log_msg_ret("run", ret);
 	for (i = 0; i < MTRR_COUNT; i++) {
 		const char *type = "Invalid";
 		uint64_t base, mask, size;
 		bool valid;
 
-		base = native_read_msr(MTRR_PHYS_BASE_MSR(i));
-		mask = native_read_msr(MTRR_PHYS_MASK_MSR(i));
+		base = info.mtrr[i].base;
+		mask = info.mtrr[i].mask;
 		size = ~mask & ((1ULL << CONFIG_CPU_ADDR_BITS) - 1);
 		size |= (1 << 12) - 1;
 		size += 1;
@@ -44,14 +59,14 @@ static int do_mtrr_list(void)
 	return 0;
 }
 
-static int do_mtrr_set(uint reg, int argc, char *const argv[])
+static int do_mtrr_set(int cpu_select, uint reg, int argc, char *const argv[])
 {
 	const char *typename = argv[0];
-	struct mtrr_state state;
 	uint32_t start, size;
 	uint64_t base, mask;
 	int i, type = -1;
 	bool valid;
+	int ret;
 
 	if (argc < 3)
 		return CMD_RET_USAGE;
@@ -73,27 +88,9 @@ static int do_mtrr_set(uint reg, int argc, char *const argv[])
 	if (valid)
 		mask |= MTRR_PHYS_MASK_VALID;
 
-	mtrr_open(&state, true);
-	wrmsrl(MTRR_PHYS_BASE_MSR(reg), base);
-	wrmsrl(MTRR_PHYS_MASK_MSR(reg), mask);
-	mtrr_close(&state, true);
-
-	return 0;
-}
-
-static int mtrr_set_valid(int reg, bool valid)
-{
-	struct mtrr_state state;
-	uint64_t mask;
-
-	mtrr_open(&state, true);
-	mask = native_read_msr(MTRR_PHYS_MASK_MSR(reg));
-	if (valid)
-		mask |= MTRR_PHYS_MASK_VALID;
-	else
-		mask &= ~MTRR_PHYS_MASK_VALID;
-	wrmsrl(MTRR_PHYS_MASK_MSR(reg), mask);
-	mtrr_close(&state, true);
+	ret = mtrr_set(cpu_select, reg, base, mask);
+	if (ret)
+		return CMD_RET_FAILURE;
 
 	return 0;
 }
@@ -101,39 +98,92 @@ static int mtrr_set_valid(int reg, bool valid)
 static int do_mtrr(struct cmd_tbl *cmdtp, int flag, int argc,
 		   char *const argv[])
 {
-	const char *cmd;
+	int cmd;
+	int cpu_select;
 	uint reg;
-
-	cmd = argv[1];
-	if (argc < 2 || *cmd == 'l')
-		return do_mtrr_list();
-	argc -= 2;
-	argv += 2;
-	if (argc <= 0)
-		return CMD_RET_USAGE;
-	reg = simple_strtoul(argv[0], NULL, 16);
-	if (reg >= MTRR_COUNT) {
-		printf("Invalid register number\n");
-		return CMD_RET_USAGE;
+	int ret;
+
+	cpu_select = MP_SELECT_BSP;
+	if (argc >= 3 && !strcmp("-c", argv[1])) {
+		const char *cpustr;
+
+		cpustr = argv[2];
+		if (*cpustr == 'a')
+			cpu_select = MP_SELECT_ALL;
+		else
+			cpu_select = simple_strtol(cpustr, NULL, 16);
+		argc -= 2;
+		argv += 2;
+	}
+	argc--;
+	argv++;
+	cmd = argv[0] ? *argv[0] : 0;
+	if (argc < 1 || !cmd) {
+		cmd = 'l';
+		reg = 0;
+	} else {
+		if (argc < 2)
+			return CMD_RET_USAGE;
+		reg = simple_strtoul(argv[1], NULL, 16);
+		if (reg >= MTRR_COUNT) {
+			printf("Invalid register number\n");
+			return CMD_RET_USAGE;
+		}
+	}
+	if (cmd == 'l') {
+		bool first;
+		int i;
+
+		i = mp_first_cpu(cpu_select);
+		if (i < 0) {
+			printf("Invalid CPU (err=%d)\n", i);
+			return CMD_RET_FAILURE;
+		}
+		first = true;
+		for (; i >= 0; i = mp_next_cpu(cpu_select, i)) {
+			if (!first)
+				printf("\n");
+			printf("CPU %d:\n", i);
+			ret = do_mtrr_list(i);
+			if (ret) {
+				printf("Failed to read CPU %d (err=%d)\n", i,
+				       ret);
+				return CMD_RET_FAILURE;
+			}
+			first = false;
+		}
+	} else {
+		switch (cmd) {
+		case 'e':
+			ret = mtrr_set_valid(cpu_select, reg, true);
+			break;
+		case 'd':
+			ret = mtrr_set_valid(cpu_select, reg, false);
+			break;
+		case 's':
+			ret = do_mtrr_set(cpu_select, reg, argc - 2, argv + 2);
+			break;
+		default:
+			return CMD_RET_USAGE;
+		}
+		if (ret) {
+			printf("Operation failed (err=%d)\n", ret);
+			return CMD_RET_FAILURE;
+		}
 	}
-	if (*cmd == 'e')
-		return mtrr_set_valid(reg, true);
-	else if (*cmd == 'd')
-		return mtrr_set_valid(reg, false);
-	else if (*cmd == 's')
-		return do_mtrr_set(reg, argc - 1, argv + 1);
-	else
-		return CMD_RET_USAGE;
 
 	return 0;
 }
 
 U_BOOT_CMD(
-	mtrr,	6,	1,	do_mtrr,
+	mtrr,	8,	1,	do_mtrr,
 	"Use x86 memory type range registers (32-bit only)",
 	"[list]        - list current registers\n"
 	"set <reg> <type> <start> <size>   - set a register\n"
 	"\t<type> is Uncacheable, Combine, Through, Protect, Back\n"
 	"disable <reg>      - disable a register\n"
-	"ensable <reg>      - enable a register"
+	"enable <reg>       - enable a register\n"
+	"\n"
+	"Precede command with '-c <n>|all' to access a particular hex CPU, e.g.\n"
+	"   mtrr -c all list; mtrr -c 2e list"
 );
diff --git a/doc/board/google/chromebook_coral.rst b/doc/board/google/chromebook_coral.rst
index 40bd9397d4..c39f1e310c 100644
--- a/doc/board/google/chromebook_coral.rst
+++ b/doc/board/google/chromebook_coral.rst
@@ -188,6 +188,7 @@ Partial memory map
     fef00000  1000 CONFIG_BOOTSTAGE_STASH_ADDR
     fef00000       Base of CAR region
 
+       30000       AP_DEFAULT_BASE (used to start up additional CPUs)
        f0000       CONFIG_ROM_TABLE_ADDR
       120000       BSS (defined in u-boot-spl.lds)
       200000       FSP-S (which is run after U-Boot is relocated)
diff --git a/drivers/core/acpi.c b/drivers/core/acpi.c
index cdbc2c5cf5..7fe93992b5 100644
--- a/drivers/core/acpi.c
+++ b/drivers/core/acpi.c
@@ -195,7 +195,7 @@ static int sort_acpi_item_type(struct acpi_ctx *ctx, void *start,
 					"u-boot,acpi-dsdt-order" :
 					"u-boot,acpi-ssdt-order", &size);
 	if (!order) {
-		log_warning("Failed to find ordering, leaving as is\n");
+		log_debug("Failed to find ordering, leaving as is\n");
 		return 0;
 	}
 
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 8c78792cc9..d4a4e2215d 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -167,5 +167,6 @@ typedef struct global_data {
 #define GD_FLG_LOG_READY	0x08000 /* Log system is ready for use	   */
 #define GD_FLG_WDT_READY	0x10000 /* Watchdog is ready for use	   */
 #define GD_FLG_SKIP_LL_INIT	0x20000	/* Don't perform low-level init	   */
+#define GD_FLG_SMP_READY	0x40000	/* SMP init is complete		   */
 
 #endif /* __ASM_GENERIC_GBL_DATA_H */