pci: Drop DM_PCIWIP/2021-09-09-finish-pre-DM_PCI-removal

This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

15 files changed, 14 insertions, 54 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index b6f9e177b6..8f8daadcf9 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -182,7 +182,6 @@ config X86
 	select SUPPORT_TPL
 	select CREATE_ARCH_SYMLINK
 	select DM
-	select DM_PCI
 	select HAVE_ARCH_IOMAP
 	select HAVE_PRIVATE_LIBGCC
 	select OF_CONTROL
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2d59562665..b5bd3284cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1681,7 +1681,7 @@ config TARGET_SL28
 	select DM_SPI_FLASH
 	select DM_ETH
 	select DM_MDIO
-	select DM_PCI
+	select PCI
 	select DM_RNG
 	select DM_RTC
 	select DM_SCSI
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 789a50d4e9..515c3020fa 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -237,7 +237,7 @@ config TARGET_KOSAGI_NOVENA
 	select DM_ETH
 	select DM_GPIO
 	select DM_MMC
-	select DM_PCI
+	select PCI
 	select DM_SCSI
 	select DM_VIDEO
 	select OF_CONTROL
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6b1f10d9a0..a5cec387a0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -17,7 +17,7 @@ config TARGET_MALTA
 	select BOARD_EARLY_INIT_R
 	select DM
 	select DM_SERIAL
-	select DM_PCI
+	select PCI
 	select DM_ETH
 	select DYNAMIC_IO_PORT_BASE
 	select MIPS_CM
diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig
index a7de82d3bf..1bbf1bc84a 100644
--- a/board/emulation/qemu-riscv/Kconfig
+++ b/board/emulation/qemu-riscv/Kconfig
@@ -51,7 +51,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	imply E1000
 	imply NVME
 	imply PCI
-	imply DM_PCI
 	imply PCIE_ECAM_GENERIC
 	imply SCSI
 	imply DM_SCSI
diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig
index 706b8dc0f1..c181d26a44 100644
--- a/board/socionext/developerbox/Kconfig
+++ b/board/socionext/developerbox/Kconfig
@@ -7,7 +7,6 @@ choice
 config TARGET_DEVELOPERBOX
 	bool "Socionext DeveloperBox"
 	select PCI
-	select DM_PCI
 	select PCIE_ECAM_SYNQUACER
 	select SYS_DISABLE_DCACHE_OPS
 	select OF_BOARD_SETUP
diff --git a/common/Kconfig b/common/Kconfig
index 2ab20a6c85..ee14d3ad5b 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -551,7 +551,6 @@ config MISC_INIT_R
 config PCI_INIT_R
 	bool "Enumerate PCI buses during init"
 	depends on PCI
-	default y if !DM_PCI
 	help
 	  With this option U-Boot will call pci_init() soon after relocation,
 	  which will enumerate PCI buses. This is needed, for instance, in the
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a89c1a62b..e37ac9f494 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -358,7 +358,7 @@ config PIC32_GPIO
 
 config OCTEON_GPIO
 	bool "Octeon II/III/TX/TX2 GPIO driver"
-	depends on DM_GPIO && DM_PCI &&	(ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+	depends on DM_GPIO && PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
 	default y
 	help
 	  Add support for the Marvell Octeon GPIO driver. This is used with
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c2eb24e0f7..c16ebb2491 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
 obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
 obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
 obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
-ifdef CONFIG_DM_PCI
+ifdef CONFIG_PCI
 obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
 endif
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 32f2708dc3..d4dc72046c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -222,7 +222,6 @@ config DWC_ETH_QOS_TEGRA186
 
 config E1000
 	bool "Intel PRO/1000 Gigabit Ethernet support"
-	depends on (DM_ETH && DM_PCI) || !DM_ETH
 	help
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -506,7 +505,7 @@ config OCTEONTX2_CGX_INTF
 
 config PCH_GBE
 	bool "Intel Platform Controller Hub EG20T GMAC driver"
-	depends on DM_ETH && DM_PCI
+	depends on DM_ETH
 	select PHYLIB
 	help
 	  This MAC is present in Intel Platform Controller Hub EG20T. It
@@ -606,7 +605,6 @@ source "drivers/net/ti/Kconfig"
 
 config TULIP
 	bool "DEC Tulip DC2114x Ethernet support"
-	depends on (DM_ETH && DM_PCI) || !DM_ETH
 	help
 	  This driver supports DEC DC2114x Fast ethernet chips.
 
@@ -791,7 +789,7 @@ config HIGMACV300_ETH
 
 config FSL_ENETC
 	bool "NXP ENETC Ethernet controller"
-	depends on DM_PCI && DM_ETH && DM_MDIO
+	depends on DM_ETH && DM_MDIO
 	help
 	  This driver supports the NXP ENETC Ethernet controller found on some
 	  of the NXP SoCs.
diff --git a/drivers/net/mscc_eswitch/Kconfig b/drivers/net/mscc_eswitch/Kconfig
index ccf7822dbe..930d2ef113 100644
--- a/drivers/net/mscc_eswitch/Kconfig
+++ b/drivers/net/mscc_eswitch/Kconfig
@@ -39,7 +39,7 @@ config MSCC_SERVAL_SWITCH
 
 config MSCC_FELIX_SWITCH
 	bool "Felix switch driver"
-	depends on DM_DSA && DM_PCI
+	depends on DM_DSA
 	select FSL_ENETC
 	help
 	  This driver supports the Ethernet switch integrated in the
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ef4d46797..e4123ba820 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -2,35 +2,26 @@ menuconfig PCI
 	bool "PCI support"
 	depends on DM
 	default y if PPC
-	select DM_PCI
 	help
 	  Enable support for PCI (Peripheral Interconnect Bus), a type of bus
 	  used on some devices to allow the CPU to communicate with its
 	  peripherals.
 
-config DM_PCI
-	bool
-	help
-	  Use driver model for PCI. Driver model is the new method for
-	  orgnising devices in U-Boot. For PCI, driver model keeps track of
-	  available PCI devices, allows scanning of PCI buses and provides
-	  device configuration support.
+	  This subsystem requires driver model.
 
 if PCI
 
 config DM_PCI_COMPAT
 	bool "Enable compatible functions for PCI"
-	depends on DM_PCI
 	help
 	  Enable compatibility functions for PCI so that old code can be used
-	  with CONFIG_DM_PCI enabled. This should be used as an interim
+	  with CONFIG_PCI enabled. This should be used as an interim
 	  measure when porting a board to use driver model for PCI. Once the
 	  board is fully supported, this option should be disabled.
 
 config PCI_AARDVARK
 	bool "Enable Aardvark PCIe driver"
 	default n
-	depends on DM_PCI
 	depends on DM_GPIO
 	depends on ARMADA_3700
 	help
@@ -40,14 +31,12 @@ config PCI_AARDVARK
 
 config PCI_PNP
 	bool "Enable Plug & Play support for PCI"
-	depends on PCI || DM_PCI
 	default y
 	help
 	  Enable PCI memory and I/O space resource allocation and assignment.
 
 config PCI_REGION_MULTI_ENTRY
 	bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
-	depends on PCI || DM_PCI
 	default n
 	help
 	  Enable PCI memory regions to be of multiple entry. Multiple entry
@@ -57,7 +46,6 @@ config PCI_REGION_MULTI_ENTRY
 
 config PCI_MAP_SYSTEM_MEMORY
 	bool "Map local system memory from a virtual base address"
-	depends on PCI || DM_PCI
 	depends on MIPS
 	default n
 	help
@@ -70,7 +58,6 @@ config PCI_MAP_SYSTEM_MEMORY
 
 config PCI_SRIOV
 	bool "Enable Single Root I/O Virtualization support for PCI"
-	depends on PCI || DM_PCI
 	default n
 	help
 	  Say Y here if you want to enable PCI Single Root I/O Virtualization
@@ -80,7 +67,6 @@ config PCI_SRIOV
 
 config PCI_ARID
         bool "Enable Alternate Routing-ID support for PCI"
-        depends on PCI || DM_PCI
         default n
         help
           Say Y here if you want to enable Alternate Routing-ID capability
@@ -90,7 +76,6 @@ config PCI_ARID
 config PCIE_ECAM_GENERIC
 	bool "Generic ECAM-based PCI host controller support"
 	default n
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable support for generic ECAM-based
 	  PCIe host controllers, such as the one emulated by QEMU.
@@ -98,7 +83,6 @@ config PCIE_ECAM_GENERIC
 config PCIE_ECAM_SYNQUACER
 	bool "SynQuacer ECAM-based PCI host controller support"
 	default n
-	depends on DM_PCI
 	select PCI_INIT_R
 	select PCI_REGION_MULTI_ENTRY
 	help
@@ -109,14 +93,12 @@ config PCIE_ECAM_SYNQUACER
 
 config PCI_PHYTIUM
 	bool "Phytium PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on
 	  Phytium SoCs.
 
 config PCIE_DW_MVEBU
 	bool "Enable Armada-8K PCIe driver (DesignWare core)"
-	depends on DM_PCI
 	depends on ARMADA_8K
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -135,7 +117,6 @@ config PCIE_DW_SIFIVE
 
 config PCIE_FSL
 	bool "FSL PowerPC PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on FSL
 	  PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
@@ -143,14 +124,12 @@ config PCIE_FSL
 
 config PCI_MPC85XX
 	bool "MPC85XX PowerPC PCI support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCI controller support on FSL
 	  PowerPC MPC85xx SoC.
 
 config PCI_RCAR_GEN2
 	bool "Renesas RCar Gen2 PCIe driver"
-	depends on DM_PCI
 	depends on RCAR_32
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -159,7 +138,6 @@ config PCI_RCAR_GEN2
 
 config PCI_RCAR_GEN3
 	bool "Renesas RCar Gen3 PCIe driver"
-	depends on DM_PCI
 	depends on RCAR_GEN3
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -167,7 +145,7 @@ config PCI_RCAR_GEN3
 
 config PCI_SANDBOX
 	bool "Sandbox PCI support"
-	depends on SANDBOX && DM_PCI
+	depends on SANDBOX
 	help
 	  Support PCI on sandbox, as an emulated bus. This permits testing of
 	  PCI feature such as bus scanning, device configuration and device
@@ -202,7 +180,6 @@ config PCIE_OCTEON
 
 config PCI_XILINX
 	bool "Xilinx AXI Bridge for PCI Express"
-	depends on DM_PCI
 	help
 	  Enable support for the Xilinx AXI bridge for PCI express, an IP block
 	  which can be used on some generations of Xilinx FPGAs.
@@ -213,7 +190,6 @@ config PCIE_LAYERSCAPE
 
 config PCIE_LAYERSCAPE_RC
 	bool "Layerscape PCIe Root Complex mode support"
-	depends on DM_PCI
 	select PCIE_LAYERSCAPE
 	help
 	  Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
@@ -235,7 +211,6 @@ config PCI_IOMMU_EXTRA_MAPPINGS
 
 config PCIE_LAYERSCAPE_EP
 	bool "Layerscape PCIe Endpoint mode support"
-	depends on DM_PCI
 	select PCIE_LAYERSCAPE
 	select PCI_ENDPOINT
 	help
@@ -246,7 +221,6 @@ config PCIE_LAYERSCAPE_EP
 
 config PCIE_LAYERSCAPE_GEN4
 	bool "Layerscape Gen4 PCIe support"
-	depends on DM_PCI
 	help
 	  Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
 	  several PCIe controllers. The PCIe controller can work in RC or
@@ -279,14 +253,12 @@ config FSL_PCIE_EP_COMPAT
 
 config PCIE_INTEL_FPGA
 	bool "Intel FPGA PCIe support"
-	depends on DM_PCI
 	help
 	  Say Y here if you want to enable PCIe controller support on Intel
 	  FPGA, example Stratix 10.
 
 config PCIE_IPROC
 	bool "Iproc PCIe support"
-	depends on DM_PCI
 	help
 	  Broadcom iProc PCIe controller driver.
 	  Say Y here if you want to enable Broadcom iProc PCIe controller,
@@ -294,7 +266,6 @@ config PCIE_IPROC
 config PCI_MVEBU
 	bool "Enable Armada XP/38x PCIe driver"
 	depends on ARCH_MVEBU
-	select DM_PCI
 	select MISC
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -302,7 +273,6 @@ config PCI_MVEBU
 
 config PCIE_DW_COMMON
 	bool
-	select DM_PCI
 
 config PCI_KEYSTONE
 	bool "TI Keystone PCIe controller"
@@ -312,7 +282,6 @@ config PCI_KEYSTONE
 
 config PCIE_MEDIATEK
 	bool "MediaTek PCIe Gen2 controller"
-	depends on DM_PCI
 	depends on ARCH_MEDIATEK
 	help
 	  Say Y here if you want to enable Gen2 PCIe controller,
@@ -329,7 +298,6 @@ config PCIE_DW_MESON
 config PCIE_ROCKCHIP
 	bool "Enable Rockchip PCIe driver"
 	depends on ARCH_ROCKCHIP
-	select DM_PCI
 	select PHY_ROCKCHIP_PCIE
 	default y if ROCKCHIP_RK3399
 	help
@@ -347,7 +315,6 @@ config PCIE_DW_ROCKCHIP
 
 config PCI_BRCMSTB
 	bool "Broadcom STB PCIe controller"
-	depends on DM_PCI
 	depends on ARCH_BCM283X
 	help
 	  Say Y here if you want to enable support for PCIe controller
@@ -357,7 +324,6 @@ config PCI_BRCMSTB
 
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe driver"
-	depends on DM_PCI
 	depends on ARCH_UNIPHIER
 	select PHY_UNIPHIER_PCIE
 	help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e12699bec7..d07e9a28af 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -271,7 +271,7 @@ config NXP_FSPI
 
 config OCTEON_SPI
 	bool "Octeon SPI driver"
-	depends on DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+	depends on ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2
 	help
 	  Enable the Octeon SPI driver. This driver can be used to
 	  access the SPI NOR flash on Octeon II/III and OcteonTX/TX2
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 1835607083..863c3fbe02 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -31,7 +31,7 @@ config VIRTIO_MMIO
 
 config VIRTIO_PCI
 	bool "PCI driver for virtio devices"
-	depends on DM_PCI
+	depends on PCI
 	select VIRTIO
 	help
 	  This driver provides support for virtio based paravirtual device
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 516f69d61c..55162e9499 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -65,7 +65,7 @@ obj-y += of_extra.o
 obj-$(CONFIG_OSD) += osd.o
 obj-$(CONFIG_DM_VIDEO) += panel.o
 obj-$(CONFIG_EFI_PARTITION) += part.o
-obj-$(CONFIG_DM_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_P2SB) += p2sb.o
 obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
 obj-$(CONFIG_PCH) += pch.o