arm: Remove MPC8349EMDS board and ARCH_MPC8349 supportWIP/2021-09-08-remove-non-DM-boards

This board has not been converted to CONFIG_DM by the deadline.
Remove it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

22 files changed, 45 insertions, 1968 deletions

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index fcf4ef2b36..cff98f7599 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -8,22 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_MPC8349EMDS
-	bool "Support MPC8349EMDS"
-	select ARCH_MPC8349
-	select BOARD_EARLY_INIT_F
-	select SYS_FSL_DDR
-	select SYS_FSL_DDR_BE
-	select SYS_FSL_HAS_DDR2
-
-config TARGET_MPC8349EMDS_SDRAM
-	bool "Support MPC8349EMDS_SDRAM"
-	select ARCH_MPC8349
-	select BOARD_EARLY_INIT_F
-	select SYS_FSL_DDR
-	select SYS_FSL_DDR_BE
-	select SYS_FSL_HAS_DDR2
-
 config TARGET_MPC837XERDB
 	bool "Support MPC837XERDB"
 	select ARCH_MPC837X
@@ -173,15 +157,6 @@ config ARCH_MPC834X
 	bool
 	select SYS_CACHE_SHIFT_5
 
-config ARCH_MPC8349
-	bool
-	select ARCH_MPC834X
-	select MPC83XX_PCI_SUPPORT
-	select MPC83XX_TSEC1_SUPPORT
-	select MPC83XX_TSEC2_SUPPORT
-	select MPC83XX_LDP_PIN
-	select MPC83XX_SECOND_I2C
-
 config ARCH_MPC8360
 	bool
 	select MPC83XX_QUICC_ENGINE
@@ -220,36 +195,9 @@ source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
 source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
 source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
 
-menu "Legacy options"
-
-if ARCH_MPC8349
-
-#TODO(mario.six@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT
-choice
-	prompt "PMC slot configuration"
-
-config PCI_ALL_PCI1
-	bool "All PMC slots on PCI1"
-
-config PCI_ONE_PCI1
-	bool "First PMC1 on PCI1"
-
-config PCI_TWO_PCI1
-	bool "First two PMC1 on PCI1"
-
-endchoice
-
-config PCI_64BIT
-	bool "PMC2 is 64bit"
-
-endif
-
-endmenu
-
 config FSL_ELBC
 	bool
 
-source "board/freescale/mpc8349emds/Kconfig"
 source "board/freescale/mpc837xerdb/Kconfig"
 source "board/ids/ids8313/Kconfig"
 source "board/keymile/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
index 23e81ab0bf..208eed0495 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
@@ -22,7 +22,7 @@ config BR0_PORTSIZE_16BIT
 
 config BR0_PORTSIZE_32BIT
 	depends on !BR0_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"
 
 endchoice
@@ -58,11 +58,11 @@ config BR0_MACHINE_GPCM
 	bool "GPCM"
 
 config BR0_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"
 
 config BR0_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"
 
 config BR0_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
index 08dcc7dd2b..1dc3e75076 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
@@ -22,7 +22,7 @@ config BR1_PORTSIZE_16BIT
 
 config BR1_PORTSIZE_32BIT
 	depends on !BR1_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"
 
 endchoice
@@ -58,11 +58,11 @@ config BR1_MACHINE_GPCM
 	bool "GPCM"
 
 config BR1_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"
 
 config BR1_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"
 
 config BR1_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
index 298d87f5e0..a9b2546cd8 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
@@ -22,7 +22,7 @@ config BR2_PORTSIZE_16BIT
 
 config BR2_PORTSIZE_32BIT
 	depends on !BR2_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"
 
 endchoice
@@ -58,11 +58,11 @@ config BR2_MACHINE_GPCM
 	bool "GPCM"
 
 config BR2_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"
 
 config BR2_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"
 
 config BR2_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
index 963831bfcb..94442cdc97 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
@@ -22,7 +22,7 @@ config BR3_PORTSIZE_16BIT
 
 config BR3_PORTSIZE_32BIT
 	depends on !BR3_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"
 
 endchoice
@@ -58,11 +58,11 @@ config BR3_MACHINE_GPCM
 	bool "GPCM"
 
 config BR3_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"
 
 config BR3_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"
 
 config BR3_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
index 0063dab962..5d69385a23 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
@@ -22,7 +22,7 @@ config BR4_PORTSIZE_16BIT
 
 config BR4_PORTSIZE_32BIT
 	depends on !BR4_MACHINE_FCM
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	depends on ARCH_MPC8360 || ARCH_MPC8379
 	bool "32-bit"
 
 endchoice
@@ -58,11 +58,11 @@ config BR4_MACHINE_GPCM
 	bool "GPCM"
 
 config BR4_MACHINE_FCM
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "FCM"
 
 config BR4_MACHINE_SDRAM
-	depends on ARCH_MPC8349 || ARCH_MPC8360
+	depends on ARCH_MPC8360
 	bool "SDRAM"
 
 config BR4_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/hid/Kconfig b/arch/powerpc/cpu/mpc83xx/hid/Kconfig
index c367ad2ce1..1f61108cee 100644
--- a/arch/powerpc/cpu/mpc83xx/hid/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hid/Kconfig
@@ -434,7 +434,7 @@ config HID2_IWLCK_1
 config HID2_IWLCK_2
 	bool "Way 0 through 2 locked"
 
-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379
 
 config HID2_IWLCK_3
 	bool "Way 0 through 3 locked"
@@ -470,7 +470,7 @@ config HID2_DWLCK_1
 config HID2_DWLCK_2
 	bool "Way 0 through 2 locked"
 
-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379
 
 config HID2_DWLCK_3
 	bool "Way 0 through 3 locked"
diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
index 75ec9c9a34..71fa73801a 100644
--- a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
@@ -7,7 +7,7 @@ config LBMC_CLOCK_MODE_1_1
 	bool "1 : 1"
 
 config LBMC_CLOCK_MODE_1_2
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "1 : 2"
 
 endchoice
@@ -19,12 +19,12 @@ config DDR_MC_CLOCK_MODE_1_2
 	bool "1 : 2"
 
 config DDR_MC_CLOCK_MODE_1_1
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "1 : 1"
 
 endchoice
 
-if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349
+if !ARCH_MPC8313 && !ARCH_MPC832X
 
 choice
 	prompt "System PLL VCO division"
@@ -67,43 +67,43 @@ config SYSTEM_PLL_FACTOR_6_1
 	bool "6 : 1"
 
 config SYSTEM_PLL_FACTOR_7_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "7 : 1"
 
 config SYSTEM_PLL_FACTOR_8_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "8 : 1"
 
 config SYSTEM_PLL_FACTOR_9_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "9 : 1"
 
 config SYSTEM_PLL_FACTOR_10_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "10 : 1"
 
 config SYSTEM_PLL_FACTOR_11_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "11 : 1"
 
 config SYSTEM_PLL_FACTOR_12_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "12 : 1"
 
 config SYSTEM_PLL_FACTOR_13_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "13 : 1"
 
 config SYSTEM_PLL_FACTOR_14_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "14 : 1"
 
 config SYSTEM_PLL_FACTOR_15_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	depends on ARCH_MPV8360 || ARCH_MPC837X
 	bool "15 : 1"
 
 config SYSTEM_PLL_FACTOR_16_1
-	depends on ARCH_MPC8349 || ARCH_MPV8360
+	depends on ARCH_MPV8360
 	bool "16 : 1"
 
 endchoice
@@ -310,21 +310,6 @@ config PCI_HOST_MODE_ENABLE
 
 endchoice
 
-if ARCH_MPC8349
-
-choice
-	prompt "PCI 64-bit mode"
-
-config PCI_64BIT_MODE_DISABLE
-	bool "Disabled"
-
-config PCI_64BIT_MODE_ENABLE
-	bool "Enabled"
-
-endchoice
-
-endif
-
 choice
 	prompt "PCI internal arbiter 1 mode"
 
@@ -336,21 +321,6 @@ config PCI_INT_ARBITER1_ENABLE
 
 endchoice
 
-if ARCH_MPC8349
-
-choice
-	prompt "PCI internal arbiter 2 mode"
-
-config PCI_INT_ARBITER2_DISABLE
-	bool "Disabled"
-
-config PCI_INT_ARBITER2_ENABLE
-	bool "Enabled"
-
-endchoice
-
-endif
-
 if ARCH_MPC8360
 
 choice
@@ -425,10 +395,6 @@ config BOOT_ROM_INTERFACE_PCI1
 	depends on MPC83XX_PCI_SUPPORT
 	bool "PCI1"
 
-config BOOT_ROM_INTERFACE_PCI2
-	depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349
-	bool "PCI2"
-
 config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
 	depends on ARCH_MPC837X
 	bool "PCI2"
@@ -448,15 +414,15 @@ config BOOT_ROM_INTERFACE_GPCM_16BIT
 	bool "Local bus GPCM - 16-bit ROM"
 
 config BOOT_ROM_INTERFACE_GPCM_32BIT
-	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8360 || ARCH_MPC837X
 	bool "Local bus GPCM - 32-bit ROM"
 
 config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "Local bus NAND Flash- 8-bit small page ROM"
 
 config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
-	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	depends on !ARCH_MPC832X && !ARCH_MPC8360
 	bool "Local bus NAND Flash- 8-bit large page ROM"
 
 endchoice
@@ -467,11 +433,10 @@ choice
 	prompt "TSEC1 mode"
 
 config TSEC1_MODE_MII
-	depends on !ARCH_MPC8349
 	bool "MII"
 
 config TSEC1_MODE_RMII
-	depends on ARCH_MPC831X && !ARCH_MPC8349
+	depends on ARCH_MPC831X
 	bool "RMII"
 
 config TSEC1_MODE_RGMII
@@ -481,14 +446,6 @@ config TSEC1_MODE_RTBI
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "RTBI"
 
-config TSEC1_MODE_GMII
-	depends on ARCH_MPC8349
-	bool "GMII"
-
-config TSEC1_MODE_TBI
-	depends on ARCH_MPC8349
-	bool "TBI"
-
 config TSEC1_MODE_SGMII
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "SGMII"
@@ -503,11 +460,10 @@ choice
 	prompt "TSEC2 mode"
 
 config TSEC2_MODE_MII
-	depends on !ARCH_MPC8349
 	bool "MII"
 
 config TSEC2_MODE_RMII
-	depends on ARCH_MPC831X && !ARCH_MPC8349
+	depends on ARCH_MPC831X
 	bool "RMII"
 
 config TSEC2_MODE_RGMII
@@ -517,14 +473,6 @@ config TSEC2_MODE_RTBI
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "RTBI"
 
-config TSEC2_MODE_GMII
-	depends on ARCH_MPC8349
-	bool "GMII"
-
-config TSEC2_MODE_TBI
-	depends on ARCH_MPC8349
-	bool "TBI"
-
 config TSEC2_MODE_SGMII
 	depends on ARCH_MPC831X || ARCH_MPC837X
 	bool "SGMII"
@@ -559,7 +507,7 @@ endchoice
 
 endif
 
-if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360
+if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8360
 
 choice
 	prompt "LALE timing"
@@ -603,7 +551,7 @@ config DDR_MC_CLOCK_MODE
 
 config SYSTEM_PLL_VCO_DIV
 	int
-	default 0 if ARCH_MPC8349 || ARCH_MPC832X
+	default 0 if ARCH_MPC832X
 	default 2 if ARCH_MPC8313
 	default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X
 	default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X
@@ -675,7 +623,6 @@ config BOOT_ROM_INTERFACE
 	hex
 	default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
 	default 0x4 if BOOT_ROM_INTERFACE_PCI1
-	default 0x8 if BOOT_ROM_INTERFACE_PCI2
 	default 0x8 if BOOT_ROM_INTERFACE_ESDHC
 	default 0xc if BOOT_ROM_INTERFACE_SPI
 	default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
@@ -690,26 +637,18 @@ config TSEC1_MODE
 	default 0x0 if !MPC83XX_TSEC1_SUPPORT
 	default 0x0 if TSEC1_MODE_MII
 	default 0x1 if TSEC1_MODE_RMII
-	default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349
-	default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349
+	default 0x3 if TSEC1_MODE_RGMII
+	default 0x5 if TSEC1_MODE_RTBI
 	default 0x6 if TSEC1_MODE_SGMII
-	default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349
-	default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349
-	default 0x2 if TSEC1_MODE_GMII
-	default 0x3 if TSEC1_MODE_TBI
 
 config TSEC2_MODE
 	hex
 	default 0x0 if !MPC83XX_TSEC2_SUPPORT
 	default 0x0 if TSEC2_MODE_MII
 	default 0x1 if TSEC2_MODE_RMII
-	default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349
-	default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349
+	default 0x3 if TSEC2_MODE_RGMII
+	default 0x5 if TSEC2_MODE_RTBI
 	default 0x6 if TSEC2_MODE_SGMII
-	default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349
-	default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349
-	default 0x2 if TSEC2_MODE_GMII
-	default 0x3 if TSEC2_MODE_TBI
 
 config SECONDARY_DDR_IO
 	int
@@ -792,9 +731,7 @@ config PCI_HOST_MODE
 
 config PCI_64BIT_MODE
 	int
-	default 0 if !ARCH_MPC8349
-	default 0 if PCI_64BIT_MODE_DISABLE
-	default 1 if PCI_64BIT_MODE_ENABLE
+	default 0
 
 config PCI_INT_ARBITER1
 	int
@@ -804,9 +741,7 @@ config PCI_INT_ARBITER1
 
 config PCI_INT_ARBITER2
 	int
-	default 0 if !ARCH_MPC8349
-	default 0 if PCI_INT_ARBITER2_DISABLE
-	default 1 if PCI_INT_ARBITER2_ENABLE
+	default 0
 
 config PCI_CLOCK_OUTPUT_DRIVE
 	int
diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
index 7d66ba726b..0f34267891 100644
--- a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
@@ -1,11 +1,3 @@
-#ifdef CONFIG_ARCH_MPC8349
-#define TSEC1_MODE_SHIFT 17
-#define TSEC2_MODE_SHIFT 19
-#else
-#define TSEC1_MODE_SHIFT 18
-#define TSEC2_MODE_SHIFT 21
-#endif
-
 #define CONFIG_SYS_HRCW_LOW (\
 	(CONFIG_LBMC_CLOCK_MODE << (31 - 0)) |\
 	(CONFIG_DDR_MC_CLOCK_MODE << (31 - 1)) |\
@@ -28,8 +20,8 @@
 	(CONFIG_BOOT_SEQUENCER << (31 - 7)) |\
 	(CONFIG_SOFTWARE_WATCHDOG << (31 - 8)) |\
 	(CONFIG_BOOT_ROM_INTERFACE << (31 - 13)) |\
-	(CONFIG_TSEC1_MODE << (31 - TSEC1_MODE_SHIFT)) |\
-	(CONFIG_TSEC2_MODE << (31 - TSEC2_MODE_SHIFT)) |\
+	(CONFIG_TSEC1_MODE << (31 - 18)) |\
+	(CONFIG_TSEC2_MODE << (31 - 21)) |\
 	(CONFIG_SECONDARY_DDR_IO << (31 - 27)) |\
 	(CONFIG_TRUE_LITTLE_ENDIAN << (31 - 28)) |\
 	(CONFIG_LALE_TIMING << (31 - 29)) |\
diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
index f32309e6c0..33e1295df1 100644
--- a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
+++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
@@ -38,50 +38,6 @@ endchoice
 
 endif
 
-if ARCH_MPC8349
-
-choice
-	prompt "TSEC1 emergency priority"
-
-config SPCR_TSEC1EP_UNSET
-	bool "Don't set value"
-
-config SPCR_TSEC1EP_0
-	bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC1EP_1
-	bool "Level 1"
-
-config SPCR_TSEC1EP_2
-	bool "Level 2"
-
-config SPCR_TSEC1EP_3
-	bool "Level 3 (highest priority)"
-
-endchoice
-
-choice
-	prompt "TSEC2 emergency priority"
-
-config SPCR_TSEC2EP_UNSET
-	bool "Don't set value"
-
-config SPCR_TSEC2EP_0
-	bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC2EP_1
-	bool "Level 1"
-
-config SPCR_TSEC2EP_2
-	bool "Level 2"
-
-config SPCR_TSEC2EP_3
-	bool "Level 3 (highest priority)"
-
-endchoice
-
-endif
-
 config SPCR_OPT
 	hex
 	default 0x0 if SPCR_OPT_UNSET
diff --git a/board/freescale/mpc8349emds/Kconfig b/board/freescale/mpc8349emds/Kconfig
deleted file mode 100644
index d154118079..0000000000
--- a/board/freescale/mpc8349emds/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if TARGET_MPC8349EMDS
-
-config SYS_BOARD
-	default "mpc8349emds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8349EMDS"
-
-endif
-
-if TARGET_MPC8349EMDS_SDRAM
-
-config SYS_BOARD
-	default "mpc8349emds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8349EMDS_SDRAM"
-
-endif
diff --git a/board/freescale/mpc8349emds/MAINTAINERS b/board/freescale/mpc8349emds/MAINTAINERS
deleted file mode 100644
index a8f26a9a31..0000000000
--- a/board/freescale/mpc8349emds/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-MPC8349EMDS BOARD
-#M:	Kim Phillips <kim.phillips@freescale.com>
-S:	Orphan (since 2018-05)
-F:	board/freescale/mpc8349emds/
-F:	include/configs/MPC8349EMDS.h
-F:	configs/MPC8349EMDS_defconfig
-F:	configs/MPC8349EMDS_SDRAM_defconfig
-F:	configs/MPC8349EMDS_PCI64_defconfig
-F:	configs/MPC8349EMDS_SLAVE_defconfig
diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile
deleted file mode 100644
index af02f65cb0..0000000000
--- a/board/freescale/mpc8349emds/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y += mpc8349emds.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c
deleted file mode 100644
index ac5ddc6d94..0000000000
--- a/board/freescale/mpc8349emds/ddr.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| cpo|wrdata|2T
-	 * ranks| mhz|adjst|    | delay|
-	 */
-	{2,  300,    4,   4,    2,  0},
-	{2,  365,    4,   6,    2,  0},
-	{2,  450,    4,   7,    2,  0},
-	{2,  850,    4,  31,    2,  0},
-	{1,  300,    4,   4,    2,  0},
-	{1,  365,    4,   6,    2,  0},
-	{1,  450,    4,   7,    2,  0},
-	{1,  850,    4,  31,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	unsigned int i;
-	ulong ddr_freq;
-
-	if (ctrl_num != 0)	/* we have only one controller */
-		return;
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (pdimm[i].n_ranks)
-			break;
-	}
-	if (i >= CONFIG_DIMM_SLOTS_PER_CTLR)	/* no DIMM */
-		return;
-
-	pbsp = udimm0;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks ==  pdimm[i].n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->twot_en = pbsp->force_2t;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->twot_en = pbsp_highest->force_2t;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-found:
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	popts->dqs_config = 0;	/* only true DQS signal is used on board */
-}
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
deleted file mode 100644
index eff248104d..0000000000
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/bitops.h>
-#include <asm/global_data.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#include <spi.h>
-#include <miiphy.h>
-#ifdef CONFIG_SYS_FSL_DDR2
-#include <fsl_ddr_sdram.h>
-#else
-#include <spd_sdram.h>
-#endif
-#include <linux/delay.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int fixed_sdram(void);
-void sdram_init(void);
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
-void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-int board_early_init_f (void)
-{
-	volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
-
-	/* Enable flash write */
-	bcsr[1] &= ~0x01;
-
-#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
-	/* Use USB PHY on SYS board */
-	bcsr[5] |= 0x02;
-#endif
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	phys_size_t msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -ENXIO;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-#ifndef CONFIG_SYS_FSL_DDR2
-	msize = spd_sdram() * 1024 * 1024;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	ddr_enable_ecc(msize);
-#endif
-#else
-	msize = fsl_ddr_sdram();
-#endif
-#else
-	msize = fixed_sdram() * 1024 * 1024;
-#endif
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	sdram_init();
-
-	/* set total bus SDRAM size(bytes)  -- DDR */
-	gd->ram_size = msize;
-
-	return 0;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE;
-	u32 ddr_size = msize << 20;	/* DDR size in bytes */
-	u32 ddr_size_log2 = __ilog2(ddr_size);
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-
-#if (CONFIG_SYS_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
-	im->ddr.csbnds[2].csbnds =
-		((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-		(((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >>
-				CSBNDS_EA_SHIFT) & CSBNDS_EA);
-	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
-
-	/* currently we use only one CS, so disable the other banks */
-	im->ddr.cs_config[0] = 0;
-	im->ddr.cs_config[1] = 0;
-	im->ddr.cs_config[3] = 0;
-
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-
-	im->ddr.sdram_cfg =
-		SDRAM_CFG_SREN
-		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	udelay(200);
-
-	/* enable DDR controller */
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	return msize;
-}
-#endif/*!CONFIG_SYS_SPD_EEPROM*/
-
-
-int checkboard (void)
-{
-	/*
-	 * Warning: do not read the BCSR registers here
-	 *
-	 * There is a timing bug in the 8349E and 8349EA BCSR code
-	 * version 1.2 (read from BCSR 11) that will cause the CFI
-	 * flash initialization code to overwrite BCSR 0, disabling
-	 * the serial ports and gigabit ethernet
-	 */
-
-	puts("Board: Freescale MPC8349EMDS\n");
-	return 0;
-}
-
-/*
- * if MPC8349EMDS is soldered with SDRAM
- */
-#if defined(CONFIG_SYS_BR2_PRELIM)  \
-	&& defined(CONFIG_SYS_OR2_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void sdram_init(void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbc_t *lbc = &immap->im_lbc;
-	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-	const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
-				 LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
-				 LSDMR_WRC3 | LSDMR_CL3;
-	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
-	 */
-
-	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = 0x00000000;
-	/* LB refresh timer prescal, 266MHz/32 */
-	lbc->mrtpr = 0x20000000;
-	/* LB sdram refresh timer, about 6us */
-	lbc->lsrt = 0x32000000;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode Register.
-	 */
-
-	/* 0x40636733; normal operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-
-	/* 0x68636733; precharge all the banks */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x48636733; auto refresh */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
-	asm("sync");
-	/*1 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*2 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*3 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*4 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*5 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*6 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*7 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-	/*8 times*/
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/* 0x40636733; normal operation */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-}
-#else
-void sdram_init(void)
-{
-}
-#endif
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#ifdef CONFIG_MPC8XXX_SPI
-
-#define SPI_CS_MASK	0x80000000
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat &= ~SPI_CS_MASK;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat |=  SPI_CS_MASK;
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
deleted file mode 100644
index 8c76c46d42..0000000000
--- a/board/freescale/mpc8349emds/pci.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- */
-
-#include <init.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-#include <linux/delay.h>
-
-static struct pci_region pci1_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-
-#ifdef CONFIG_MPC83XX_PCI2
-static struct pci_region pci2_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI2_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
-		size: CONFIG_SYS_PCI2_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_IO_BASE,
-		phys_start: CONFIG_SYS_PCI2_IO_PHYS,
-		size: CONFIG_SYS_PCI2_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
-		size: CONFIG_SYS_PCI2_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-#endif
-
-#ifndef CONFIG_PCISLAVE
-void pib_init(void)
-{
-	u8 val8, orig_i2c_bus;
-	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-#if defined(CONFIG_PCI_64BIT)
-	val8 = 0xf4;	/* PMC2:PCI1/64-bit */
-#elif defined(CONFIG_PCI_ALL_PCI1)
-	val8 = 0xf3;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
-#elif defined(CONFIG_PCI_ONE_PCI1)
-	val8 = 0xf9;	/* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
-#else
-	val8 = 0xf5;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
-#endif
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-#if defined(CONFIG_PCI_64BIT)
-	printf("PCI1: 64-bit on PMC2\n");
-#elif defined(CONFIG_PCI_ALL_PCI1)
-	printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
-#elif defined(CONFIG_PCI_ONE_PCI1)
-	printf("PCI1: 32-bit on PMC1\n");
-	printf("PCI2: 32-bit on PMC2, PMC3\n");
-#else
-	printf("PCI1: 32-bit on PMC1, PMC2\n");
-	printf("PCI2: 32-bit on PMC3\n");
-#endif
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-}
-
-#endif /* CONFIG_PCISLAVE */
diff --git a/configs/MPC8349EMDS_PCI64_defconfig b/configs/MPC8349EMDS_PCI64_defconfig
deleted file mode 100644
index 457a1eef03..0000000000
--- a/configs/MPC8349EMDS_PCI64_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_SDRAM_defconfig b/configs/MPC8349EMDS_SDRAM_defconfig
deleted file mode 100644
index 5f568977cb..0000000000
--- a/configs/MPC8349EMDS_SDRAM_defconfig
+++ /dev/null
@@ -1,138 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS_SDRAM=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="SDRAM"
-CONFIG_LBLAW2_LENGTH_64_MBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="SDRAM"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_PORTSIZE_32BIT=y
-CONFIG_BR2_MACHINE_SDRAM=y
-CONFIG_OR2_COLS_9=y
-CONFIG_OR2_ROWS_13=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_SLAVE_defconfig b/configs/MPC8349EMDS_SLAVE_defconfig
deleted file mode 100644
index 763d6fa398..0000000000
--- a/configs/MPC8349EMDS_SLAVE_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_defconfig b/configs/MPC8349EMDS_defconfig
deleted file mode 100644
index df9c9d3a40..0000000000
--- a/configs/MPC8349EMDS_defconfig
+++ /dev/null
@@ -1,130 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
deleted file mode 100644
index 2f1fc6a6a2..0000000000
--- a/include/configs/MPC8349EMDS.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * mpc8349emds board configuration file
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1	/* E300 Family */
-
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
-
-/*
- * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver
- * unselect it to use old spd_sdram.c
- */
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#define SPD_EEPROM_ADDRESS1	0x52
-#define SPD_EEPROM_ADDRESS2	0x51
-#define CONFIG_DIMM_SLOTS_PER_CTLR	2
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
-
-#if defined(CONFIG_SPD_EEPROM)
-/*
- * Determine DDR configuration from I2C interface.
- */
-#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
-#else
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#define CONFIG_SYS_DDR_CS2_CONFIG	(CSCONFIG_EN \
-				| CSCONFIG_ROW_BIT_13 \
-				| CSCONFIG_COL_BIT_10)
-#define CONFIG_SYS_DDR_TIMING_1	0x36332321
-#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
-
-/* the default burst length is 4 - for 64-bit data path */
-				/* DLL,normal,seq,4/2.5, 4 burst len */
-#define CONFIG_SYS_DDR_MODE	0x00000022
-#endif
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		32	/* max flash size in MB */
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef  CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
- */
-#define CONFIG_SYS_BCSR			0xE2400000
-					/* Access window base at BCSR base */
-
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/* SPI */
-#undef CONFIG_SOFT_SPI			/* SPI bit-banged */
-
-/* GPIOs.  Used as SPI chip selects */
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
-#define CONFIG_SYS_GPIO1_DAT		0xC0000000  /* Both are active LOW */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/* USB */
-#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS		0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE		0x00100000	/* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
-	#define PCI_ENET0_IOADDR	0xFIXME
-	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif	/* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII		1	/* MII PHY management */
-#define CONFIG_TSEC1		1
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_TSEC2		1
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector	*/
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-				/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
-
-/*
- * System performance
- */
-#define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
-#endif
-
-#define CONFIG_HOSTNAME		"mpc8349emds"
-#define CONFIG_ROOTPATH		"/nfsroot/rootfs"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=mpc8349emds\0"					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
-		"bootm\0"						\
-	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
-	"update=protect off fe000000 fe03ffff; "			\
-		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
-	"upd=run load update\0"						\
-	"fdtaddr=780000\0"						\
-	"fdtfile=mpc834x_mds.dtb\0"					\
-	""
-
-#define NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
deleted file mode 100644
index d6a151d20c..0000000000
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * mpc8349emds board configuration file
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1	/* E300 Family */
-
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
-
-/*
- * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver
- * unselect it to use old spd_sdram.c
- */
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#define SPD_EEPROM_ADDRESS1	0x52
-#define SPD_EEPROM_ADDRESS2	0x51
-#define CONFIG_DIMM_SLOTS_PER_CTLR	2
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
-
-#if defined(CONFIG_SPD_EEPROM)
-/*
- * Determine DDR configuration from I2C interface.
- */
-#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
-#else
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#define CONFIG_SYS_DDR_CS2_CONFIG	(CSCONFIG_EN \
-				| CSCONFIG_ROW_BIT_13 \
-				| CSCONFIG_COL_BIT_10)
-#define CONFIG_SYS_DDR_TIMING_1	0x36332321
-#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
-
-/* the default burst length is 4 - for 64-bit data path */
-				/* DLL,normal,seq,4/2.5, 4 burst len */
-#define CONFIG_SYS_DDR_MODE	0x00000022
-#endif
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		32	/* max flash size in MB */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef  CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
- */
-#define CONFIG_SYS_BCSR			0xE2400000
-					/* Access window base at BCSR base */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
-
-/*
- * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
- */
-
-/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- *    port-size = 32-bits = BR2[19:20] = 11
- *    no parity checking = BR2[21:22] = 00
- *    SDRAM for MSEL = BR2[24:26] = 011
- *    Valid = BR[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
- */
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- *    64MB mask for AM, OR2[0:7] = 1111 1100
- *                 XAM, OR2[17:18] = 11
- *    9 columns OR2[19-21] = 010
- *    13 rows   OR2[23-25] = 100
- *    EAD set for extra time OR[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
- */
-
-
-				/* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT	0x32000000
-				/* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON    (LSDMR_RFEN	\
-				| LSDMR_BSMA1516	\
-				| LSDMR_RFCR8		\
-				| LSDMR_PRETOACT6	\
-				| LSDMR_ACTTORW3	\
-				| LSDMR_BL8		\
-				| LSDMR_WRC3		\
-				| LSDMR_CL3)
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/* SPI */
-#undef CONFIG_SOFT_SPI			/* SPI bit-banged */
-
-/* GPIOs.  Used as SPI chip selects */
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
-#define CONFIG_SYS_GPIO1_DAT		0xC0000000  /* Both are active LOW */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/* USB */
-#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS		0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE		0x00100000	/* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
-	#define PCI_ENET0_IOADDR	0xFIXME
-	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif	/* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII		1	/* MII PHY management */
-#define CONFIG_TSEC1		1
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_TSEC2		1
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector	*/
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-				/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
-
-/*
- * System performance
- */
-#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
-#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
-#define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
-#endif
-
-#define CONFIG_HOSTNAME		"mpc8349emds"
-#define CONFIG_ROOTPATH		"/nfsroot/rootfs"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=mpc8349emds\0"					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
-		"bootm\0"						\
-	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
-	"update=protect off fe000000 fe03ffff; "			\
-		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
-	"upd=run load update\0"						\
-	"fdtaddr=780000\0"						\
-	"fdtfile=mpc834x_mds.dtb\0"					\
-	""
-
-#define NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#endif	/* __CONFIG_H */