Merge tag 'u-boot-stm32-20200415' of https://gitlab.denx.de/u-boot/custodians/u-boot-stmWIP/15Apr2020

- Replace STM32MP1_TRUSTED by TFABOOT flag
- Enable bootd, iminfo, imxtract on ST defconfig
- Rename LEDs to match silkscreen on AV96
- Add KS8851-16MLL ethernet on FMC2
- Define FMC2 base address
- net: dwc_eth_qos: implement reset-gpios for stm32
- net: dwc_eth_qos: implement phy reg and max-speed for stm32

17 files changed, 228 insertions, 48 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bbb1e2738b..dd41090fc6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1586,6 +1586,7 @@ config ARCH_STI
 config ARCH_STM32MP
 	bool "Support STMicroelectronics STM32MP Socs with cortex A"
 	select ARCH_MISC_INIT
+	select ARCH_SUPPORT_TFABOOT
 	select BOARD_LATE_INIT
 	select CLK
 	select DM
diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index f577d79afb..11e7e6367d 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -38,21 +38,21 @@
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index 62c45def43..b57f3d520c 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -37,6 +37,12 @@
 			default-state = "on";
 		};
 	};
+
+	/* This is actually on FMC2, but we do not have bus driver for that */
+	ksz8851: ks8851mll@64000000 {
+		compatible = "micrel,ks8851-mll";
+		reg = <0x64000000 0x20000>;
+	};
 };
 
 &i2c4 {
@@ -50,6 +56,68 @@
 	};
 };
 
+&pinctrl {
+	/* These should bound to FMC2 bus driver, but we do not have one */
+	pinctrl-0 = <&fmc_pins_b>;
+	pinctrl-1 = <&fmc_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+
+	fmc_pins_b: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	fmc_sleep_pins_b: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
+		};
+	};
+};
+
 &pmic {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 96153693a7..7b86ce1612 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -35,9 +35,10 @@ config ENV_SIZE
 
 config STM32MP15x
 	bool "Support STMicroelectronics STM32MP15x Soc"
-	select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
+	select ARCH_SUPPORT_PSCI if !TFABOOT
+	select ARM_SMCCC if TFABOOT
 	select CPU_V7A
-	select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
+	select CPU_V7_HAS_NONSEC if !TFABOOT
 	select CPU_V7_HAS_VIRT
 	select OF_BOARD_SETUP
 	select PINCTRL_STM32
@@ -45,8 +46,8 @@ config STM32MP15x
 	select STM32_RESET
 	select STM32_SERIAL
 	select SYS_ARCH_TIMER
-	imply SYSRESET_PSCI if STM32MP1_TRUSTED
-	imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
+	imply SYSRESET_PSCI if TFABOOT
+	imply SYSRESET_SYSCON if !TFABOOT
 	help
 		support of STMicroelectronics SOC STM32MP15x family
 		STM32MP157, STM32MP153 or STM32MP151
@@ -83,19 +84,9 @@ config TARGET_DH_STM32MP1_PDK2
 
 endchoice
 
-config STM32MP1_TRUSTED
-	bool "Support trusted boot with TF-A"
-	default y if !SPL
-	select ARM_SMCCC
-	help
-		Say Y here to enable boot with TF-A
-		Trusted boot chain is :
-		BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
-		TF-A monitor provides proprietary SMC to manage secure devices
-
 config STM32MP1_OPTEE
 	bool "Support trusted boot with TF-A and OP-TEE"
-	depends on STM32MP1_TRUSTED
+	depends on TFABOOT
 	default n
 	help
 		Say Y here to enable boot with TF-A and OP-TEE
diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c
index 3b923f088e..0d5850b4a9 100644
--- a/arch/arm/mach-stm32mp/bsec.c
+++ b/arch/arm/mach-stm32mp/bsec.c
@@ -68,7 +68,7 @@ static bool bsec_read_lock(u32 address, u32 otp)
 	return !!(readl(address + bank) & bit);
 }
 
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 /**
  * bsec_check_error() - Check status of one otp
  * @base: base address of bsec IP
@@ -273,7 +273,7 @@ static int bsec_program_otp(long base, u32 val, u32 otp)
 
 	return ret;
 }
-#endif /* CONFIG_STM32MP1_TRUSTED */
+#endif /* CONFIG_TFABOOT */
 
 /* BSEC MISC driver *******************************************************/
 struct stm32mp_bsec_platdata {
@@ -282,7 +282,7 @@ struct stm32mp_bsec_platdata {
 
 static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
 {
-#ifdef CONFIG_STM32MP1_TRUSTED
+#ifdef CONFIG_TFABOOT
 	return stm32_smc(STM32_SMC_BSEC,
 			 STM32_SMC_READ_OTP,
 			 otp, 0, val);
@@ -313,7 +313,7 @@ static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
 
 static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
 {
-#ifdef CONFIG_STM32MP1_TRUSTED
+#ifdef CONFIG_TFABOOT
 	return stm32_smc(STM32_SMC_BSEC,
 			 STM32_SMC_READ_SHADOW,
 			 otp, 0, val);
@@ -336,7 +336,7 @@ static int stm32mp_bsec_read_lock(struct udevice *dev, u32 *val, u32 otp)
 
 static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
 {
-#ifdef CONFIG_STM32MP1_TRUSTED
+#ifdef CONFIG_TFABOOT
 	return stm32_smc_exec(STM32_SMC_BSEC,
 			      STM32_SMC_PROG_OTP,
 			      otp, val);
@@ -349,7 +349,7 @@ static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
 
 static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
 {
-#ifdef CONFIG_STM32MP1_TRUSTED
+#ifdef CONFIG_TFABOOT
 	return stm32_smc_exec(STM32_SMC_BSEC,
 			      STM32_SMC_WRITE_SHADOW,
 			      otp, val);
@@ -362,7 +362,7 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
 
 static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp)
 {
-#ifdef CONFIG_STM32MP1_TRUSTED
+#ifdef CONFIG_TFABOOT
 	if (val == 1)
 		return stm32_smc_exec(STM32_SMC_BSEC,
 				      STM32_SMC_WRLOCK_OTP,
@@ -473,7 +473,7 @@ static int stm32mp_bsec_ofdata_to_platdata(struct udevice *dev)
 	return 0;
 }
 
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 static int stm32mp_bsec_probe(struct udevice *dev)
 {
 	int otp;
@@ -500,7 +500,7 @@ U_BOOT_DRIVER(stm32mp_bsec) = {
 	.ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata,
 	.platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata),
 	.ops = &stm32mp_bsec_ops,
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 	.probe = stm32mp_bsec_probe,
 #endif
 };
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index 9aa5794334..74d03fa7dd 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -76,7 +76,7 @@
 #define PKG_MASK	GENMASK(2, 0)
 
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 static void security_init(void)
 {
 	/* Disable the backup domain write protection */
@@ -136,7 +136,7 @@ static void security_init(void)
 	writel(BIT(0), RCC_MP_AHB5ENSETR);
 	writel(0x0, GPIOZ_SECCFGR);
 }
-#endif /* CONFIG_STM32MP1_TRUSTED */
+#endif /* CONFIG_TFABOOT */
 
 /*
  * Debug init
@@ -150,7 +150,7 @@ static void dbgmcu_init(void)
 }
 #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
 
-#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+#if !defined(CONFIG_TFABOOT) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 /* get bootmode from ROM code boot context: saved in TAMP register */
 static void update_bootmode(void)
@@ -198,7 +198,7 @@ int arch_cpu_init(void)
 
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	dbgmcu_init();
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 	security_init();
 	update_bootmode();
 #endif
@@ -214,7 +214,7 @@ int arch_cpu_init(void)
 	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 #if defined(CONFIG_DEBUG_UART) && \
-	!defined(CONFIG_STM32MP1_TRUSTED) && \
+	!defined(CONFIG_TFABOOT) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	else
 		debug_uart_init();
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 6daf9f7121..76d593d785 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -13,6 +13,7 @@
 #define STM32_RCC_BASE			0x50000000
 #define STM32_PWR_BASE			0x50001000
 #define STM32_DBGMCU_BASE		0x50081000
+#define STM32_FMC2_BASE			0x58002000
 #define STM32_TZC_BASE			0x5C006000
 #define STM32_ETZPC_BASE		0x5C007000
 #define STM32_STGEN_BASE		0x5C008000
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index 7bcd713a86..322558157e 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -118,7 +118,7 @@ int checkboard(void)
 
 	if (IS_ENABLED(CONFIG_STM32MP1_OPTEE))
 		mode = "trusted with OP-TEE";
-	else if (IS_ENABLED(CONFIG_STM32MP1_TRUSTED))
+	else if (IS_ENABLED(CONFIG_TFABOOT))
 		mode = "trusted";
 	else
 		mode = "basic";
@@ -283,7 +283,7 @@ static void __maybe_unused led_error_blink(u32 nb_blink)
 
 static void sysconf_init(void)
 {
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 	u8 *syscfg;
 #ifdef CONFIG_DM_REGULATOR
 	struct udevice *pwr_dev;
@@ -375,6 +375,56 @@ static void sysconf_init(void)
 #endif
 }
 
+static void board_init_fmc2(void)
+{
+#define STM32_FMC2_BCR1			0x0
+#define STM32_FMC2_BTR1			0x4
+#define STM32_FMC2_BWTR1		0x104
+#define STM32_FMC2_BCR(x)		((x) * 0x8 + STM32_FMC2_BCR1)
+#define STM32_FMC2_BCRx_FMCEN		BIT(31)
+#define STM32_FMC2_BCRx_WREN		BIT(12)
+#define STM32_FMC2_BCRx_RSVD		BIT(7)
+#define STM32_FMC2_BCRx_FACCEN		BIT(6)
+#define STM32_FMC2_BCRx_MWID(n)		((n) << 4)
+#define STM32_FMC2_BCRx_MTYP(n)		((n) << 2)
+#define STM32_FMC2_BCRx_MUXEN		BIT(1)
+#define STM32_FMC2_BCRx_MBKEN		BIT(0)
+#define STM32_FMC2_BTR(x)		((x) * 0x8 + STM32_FMC2_BTR1)
+#define STM32_FMC2_BTRx_DATAHLD(n)	((n) << 30)
+#define STM32_FMC2_BTRx_BUSTURN(n)	((n) << 16)
+#define STM32_FMC2_BTRx_DATAST(n)	((n) << 8)
+#define STM32_FMC2_BTRx_ADDHLD(n)	((n) << 4)
+#define STM32_FMC2_BTRx_ADDSET(n)	((n) << 0)
+
+#define RCC_MP_AHB6RSTCLRR		0x218
+#define RCC_MP_AHB6RSTCLRR_FMCRST	BIT(12)
+#define RCC_MP_AHB6ENSETR		0x19c
+#define RCC_MP_AHB6ENSETR_FMCEN		BIT(12)
+
+	const u32 bcr = STM32_FMC2_BCRx_WREN |STM32_FMC2_BCRx_RSVD |
+			STM32_FMC2_BCRx_FACCEN | STM32_FMC2_BCRx_MWID(1) |
+			STM32_FMC2_BCRx_MTYP(2) | STM32_FMC2_BCRx_MUXEN |
+			STM32_FMC2_BCRx_MBKEN;
+	const u32 btr = STM32_FMC2_BTRx_DATAHLD(3) |
+			STM32_FMC2_BTRx_BUSTURN(2) |
+			STM32_FMC2_BTRx_DATAST(0x22) |
+			STM32_FMC2_BTRx_ADDHLD(2) |
+			STM32_FMC2_BTRx_ADDSET(2);
+
+	/* Set up FMC2 bus for KS8851-16MLL and X11 SRAM */
+	writel(RCC_MP_AHB6RSTCLRR_FMCRST, STM32_RCC_BASE + RCC_MP_AHB6RSTCLRR);
+	writel(RCC_MP_AHB6ENSETR_FMCEN, STM32_RCC_BASE + RCC_MP_AHB6ENSETR);
+
+	/* KS8851-16MLL -- Muxed mode */
+	writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(1));
+	writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(1));
+	/* AS7C34098 SRAM on X11 -- Muxed mode */
+	writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(3));
+	writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(3));
+
+	setbits_le32(STM32_FMC2_BASE + STM32_FMC2_BCR1, STM32_FMC2_BCRx_FMCEN);
+}
+
 /* board dependent setup after realloc */
 int board_init(void)
 {
@@ -398,7 +448,9 @@ int board_init(void)
 
 	sysconf_init();
 
-	if (CONFIG_IS_ENABLED(CONFIG_LED))
+	board_init_fmc2();
+
+	if (CONFIG_IS_ENABLED(LED))
 		led_default_state();
 
 	return 0;
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 07f5344ec9..45068b1cd9 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -92,7 +92,7 @@ int checkboard(void)
 
 	if (IS_ENABLED(CONFIG_STM32MP1_OPTEE))
 		mode = "trusted with OP-TEE";
-	else if (IS_ENABLED(CONFIG_STM32MP1_TRUSTED))
+	else if (IS_ENABLED(TFABOOT))
 		mode = "trusted";
 	else
 		mode = "basic";
@@ -462,7 +462,7 @@ static int board_check_usb_power(void)
 
 static void sysconf_init(void)
 {
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 	u8 *syscfg;
 #ifdef CONFIG_DM_REGULATOR
 	struct udevice *pwr_dev;
@@ -647,7 +647,7 @@ int board_init(void)
 
 	sysconf_init();
 
-	if (CONFIG_IS_ENABLED(CONFIG_LED))
+	if (CONFIG_IS_ENABLED(LED))
 		led_default_state();
 
 	return 0;
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 6d82365348..c8f1780cab 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -21,10 +21,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SYS_PROMPT="STM32MP> "
-# CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_MEMINFO=y
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 921dea242a..683f15e7d5 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -93,6 +93,7 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_DM_ETH=y
 CONFIG_DWC_ETH_QOS=y
+CONFIG_KS8851_MLL=y
 CONFIG_PHY=y
 CONFIG_PHY_STM32_USBPHYC=y
 CONFIG_PINCONF=y
diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig
index 298611776d..6c17bd9b20 100644
--- a/configs/stm32mp15_optee_defconfig
+++ b/configs/stm32mp15_optee_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_STM32MP=y
+CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x280000
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 6928e9a65c..d22605f398 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_STM32MP=y
+CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x280000
@@ -9,10 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PROMPT="STM32MP> "
-# CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_MEMINFO=y
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 52bd8e96f3..50df8425bf 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -19,7 +19,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 /* activate clock tree initialization in the driver */
 #define STM32MP1_CLOCK_TREE_INIT
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 0564bebf76..63f2086dec 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -306,6 +306,8 @@ struct eqos_priv {
 	struct clk clk_slave_bus;
 	struct mii_dev *mii;
 	struct phy_device *phy;
+	int phyaddr;
+	u32 max_speed;
 	void *descs;
 	struct eqos_desc *tx_descs;
 	struct eqos_desc *rx_descs;
@@ -694,6 +696,29 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
 
 static int eqos_start_resets_stm32(struct udevice *dev)
 {
+	struct eqos_priv *eqos = dev_get_priv(dev);
+	int ret;
+
+	debug("%s(dev=%p):\n", __func__, dev);
+	if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
+		ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
+		if (ret < 0) {
+			pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
+			       ret);
+			return ret;
+		}
+
+		udelay(2);
+
+		ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
+		if (ret < 0) {
+			pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d",
+			       ret);
+			return ret;
+		}
+	}
+	debug("%s: OK\n", __func__);
+
 	return 0;
 }
 
@@ -709,6 +734,18 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
 
 static int eqos_stop_resets_stm32(struct udevice *dev)
 {
+	struct eqos_priv *eqos = dev_get_priv(dev);
+	int ret;
+
+	if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
+		ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
+		if (ret < 0) {
+			pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
+			       ret);
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
@@ -1046,12 +1083,21 @@ static int eqos_start(struct udevice *dev)
 	 * don't need to reconnect/reconfigure again
 	 */
 	if (!eqos->phy) {
-		eqos->phy = phy_connect(eqos->mii, -1, dev,
+		eqos->phy = phy_connect(eqos->mii, eqos->phyaddr, dev,
 					eqos->config->interface(dev));
 		if (!eqos->phy) {
 			pr_err("phy_connect() failed");
 			goto err_stop_resets;
 		}
+
+		if (eqos->max_speed) {
+			ret = phy_set_supported(eqos->phy, eqos->max_speed);
+			if (ret) {
+				pr_err("phy_set_supported() failed: %d", ret);
+				goto err_shutdown_phy;
+			}
+		}
+
 		ret = phy_config(eqos->phy);
 		if (ret < 0) {
 			pr_err("phy_config() failed: %d", ret);
@@ -1604,6 +1650,7 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
 	struct eqos_priv *eqos = dev_get_priv(dev);
 	int ret;
 	phy_interface_t interface;
+	struct ofnode_phandle_args phandle_args;
 
 	debug("%s(dev=%p):\n", __func__, dev);
 
@@ -1618,6 +1665,8 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
 	if (ret)
 		return -EINVAL;
 
+	eqos->max_speed = dev_read_u32_default(dev, "max-speed", 0);
+
 	ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus);
 	if (ret) {
 		pr_err("clk_get_by_name(master_bus) failed: %d", ret);
@@ -1641,6 +1690,24 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
 	if (ret)
 		pr_warn("No phy clock provided %d", ret);
 
+	eqos->phyaddr = -1;
+	ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
+					 &phandle_args);
+	if (!ret) {
+		/* search "reset-gpios" in phy node */
+		ret = gpio_request_by_name_nodev(phandle_args.node,
+						 "reset-gpios", 0,
+						 &eqos->phy_reset_gpio,
+						 GPIOD_IS_OUT |
+						 GPIOD_IS_OUT_ACTIVE);
+		if (ret)
+			pr_warn("gpio_request_by_name(phy reset) not provided %d",
+				ret);
+
+		eqos->phyaddr = ofnode_read_u32_default(phandle_args.node,
+							"reg", -1);
+	}
+
 	debug("%s: OK\n", __func__);
 	return 0;
 
@@ -1704,6 +1771,9 @@ static int eqos_remove_resources_stm32(struct udevice *dev)
 	if (clk_valid(&eqos->clk_ck))
 		clk_free(&eqos->clk_ck);
 
+	if (dm_gpio_is_valid(&eqos->phy_reset_gpio))
+		dm_gpio_free(dev, &eqos->phy_reset_gpio);
+
 	debug("%s: OK\n", __func__);
 	return 0;
 }
diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c
index b1e593f86b..7b1adc5b24 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ram.c
+++ b/drivers/ram/stm32mp1/stm32mp1_ram.c
@@ -177,7 +177,7 @@ static int stm32mp1_ddr_probe(struct udevice *dev)
 
 	priv->info.base = STM32_DDR_BASE;
 
-#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+#if !defined(CONFIG_TFABOOT) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	priv->info.size = 0;
 	return stm32mp1_ddr_setup(dev);
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 42717c167e..2ba4fb1305 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -10,7 +10,7 @@
 #include <linux/sizes.h>
 #include <asm/arch/stm32.h>
 
-#ifndef CONFIG_STM32MP1_TRUSTED
+#ifndef CONFIG_TFABOOT
 /* PSCI support */
 #define CONFIG_ARMV7_PSCI_1_0
 #define CONFIG_ARMV7_SECURE_BASE		STM32_SYSRAM_BASE