path: root/comboot.doc

	 $Id$

		       COMBOOT and COM32 files


SYSLINUX supports simple standalone programs, using a file format
similar to DOS ".com" files.  A 32-bit version, called COM32, is also
provided.  A simple API provides access to a limited set of filesystem
and console functions.


	++++ COMBOOT file format ++++

A COMBOOT file is a raw binary file containing 16-bit code.  It should
be linked to run at offset 0x100, and contain no absolute segment
references.  It is run in 16-bit real mode.

A COMBOOT image can be written to be compatible with MS-DOS.  Such a
file will usually have extension ".com".  A COMBOOT file which is not
compatible with MS-DOS will usually have extension ".cbt".

Before running the program, SYSLINUX sets up the following fields in
the Program Segment Prefix (PSP), a structure at offset 0 in the
program segment:

 Offset	Size	Meaning
 0	word	Contains an INT 20h instruction
 2	word	Contains the paragraph (16-byte "segment" address) at
		the end of memory available to the program.
 128	byte	Length of the command line arguments, including the leading
		space but not including the final CR character.
 129	127b	Command line arguments, starting with a space and ending
		with a CR character (ASCII 13).

The program is allowed to use memory between the PSP paragraph (which
all the CS, DS, ES and SS registers point to at program start) and the
paragraph value given at offset 2.

On startup, SP is set up to point to the end of the 64K segment, at
0xfffe.  Under DOS it is possible for SP to contain a smaller
value if memory is very tight; this is never the case under SYSLINUX.

The program should make no assumptions about what segment address it
will be loaded at; instead it should look at the segment registers on
program startup.  Both DOS and SYSLINUX will guarantee CS == DS == ES
== SS on program start; the program should not assume anything about
the values of FS or GS.

To exit, a program can either execute a near RET (which will jump to
offset 0 which contains an INT 20h instruction, terminating the
program), or execute INT 20h or INT 21h AH=00h or INT 21h AH=4Ch.
If compatiblity with SYSLINUX 1.xx is desired, use INT 20h.


	++++ COM32 file format ++++

A COM32 file is a raw binary file containing 32-bit code.  It should
be linked to run at address 0x101000, and should not contain any
segment references.  It will be run in flat-memory 32-bit protected
mode.  Under SYSLINUX, it will be run in CPL 0, however, since it may
be possible to create a COM32 execution engine that would run under
something like Linux DOSEMU, it is recommended that the code does not
assume CPL 0 unless absolutely necessary.

It is highly recommended that every COM32 program begins with the byte
sequence B8 FF 4C CD 21 (mov eax,21cd4cffh) as a magic number.

A COM32 file should have extension ".c32".

On startup, CS will be set up as a flat 32-bit code segment, and DS ==
ES == SS will be set up as the equivalent flat 32-bit data segment.
FS and GS are reserved for future use and are currently initialized to
zero.  A COM32 image should not assume any particular values of
segment selectors.

ESP is set up at the end of available memory and also serves as
notification to the program how much memory is available.

The following arguments are passed to the program on the stack:

 Address  Size	Meaning
 [ESP]    dword Return (termination) address
 [ESP+4]  dword	Number of additional arguments (currently 5)
 [ESP+8]  dword	Pointer to the command line arguments (null-terminated string)
 [ESP+12] dword Pointer to INT call helper function
 [ESP+16] dword Pointer to low memory bounce buffer
 [ESP+20] dword Size of low memory bounce buffer
 [ESP+24] dword Pointer to FAR call helper function (new in 2.05)

This corresponds to the following C prototype, available in the file
com32/include/com32.h:

/* The standard prototype for _start() */
int _start(unsigned int __nargs,
	   char *__cmdline,
	   void (*__intcall)(uint8_t, com32sys_t *, com32sys_t *),
	   void *__bounce_ptr,
	   unsigned int __bounce_len,
	   void (*__farcall)(uint32_t, uint16_t, com32sys_t *, com32sys_t *));

The intcall helper function can be used to issue BIOS or SYSLINUX API
calls, and takes the interrupt number as first argument.  The second
argument is a pointer to the input register definition, an instance of
the following structure (also available in com32.h):

typedef union {
  uint32_t l;
  uint16_t w[2];
  uint8_t  b[4];
} reg32_t;

typedef struct {
  uint16_t gs;			/* Offset  0 */
  uint16_t fs;			/* Offset  2 */
  uint16_t es;			/* Offset  4 */
  uint16_t ds;			/* Offset  6 */

  reg32_t edi;			/* Offset  8 */
  reg32_t esi;			/* Offset 12 */
  reg32_t ebp;			/* Offset 16 */
  reg32_t _unused;		/* Offset 20 */
  reg32_t ebx;			/* Offset 24 */
  reg32_t edx;			/* Offset 28 */
  reg32_t ecx;			/* Offset 32 */
  reg32_t eax;			/* Offset 36 */

  reg32_t eflags;		/* Offset 40 */
} com32sys_t;

The third argument is a pointer to the output register definition, an
instance of the same structure.  The third argument can also be zero
(NULL).

Since BIOS or SYSLINUX API calls can generally only manipulate data
below address 0x100000, a "bounce buffer" in low memory, at least 64K
in size, is available, to copy data in and out.

The farcall helper function behaves similarly, but takes as its first
argument the CS:IP (in the form (CS << 16) + IP) of procedure to be
invoked via a FAR CALL.


	++++ SYSLINUX API CALLS +++

SYSLINUX provides the following API calls.  SYSLINUX 1.xx only
supported INT 20h - terminate program. [] indicates the first version
of SYSLINUX which supported this feature (correctly.)

NOTE: Most of the API functionality is still experimental.  Expect to
find bugs.


	++++ DOS-COMPATIBLE API CALLS ++++

INT 20h		[1.48] Terminate program
INT 21h AH=00h	[2.00] Terminate program
INT 21h AH=4Ch	[2.00] Terminate program

	All of these terminate the program.

INT 21h AH=01h	[2.01] Get Key with Echo

	Reads a key from the console input, with echo to the console
	output.  The read character is returned in AL.  Extended
	characters received from the keyboard are returned as NUL (00h)
	+ the extended character code.
	
INT 21h AH=02h	[2.01] Write Character

	Writes a character in DL to the console (video and serial)
	output.

INT 21h AH=04h	[2.01] Write Character to Serial Port

	Writes a character in DL to the serial console output
	(if enabled.)  If no serial port is configured, this routine
	does nothing.

INT 21h AH=08h	[2.09] Get Key without Echo

	Reads a key fron the console input, without echoing it to the
	console output.  The read character is returned in AL.

INT 21h AH=09h	[2.01] Write DOS String to Console

	Writes a DOS $-terminated string in DS:DX to the console.

INT 21h AH=0Bh	[2.00] Check Keyboard

	Returns AL=FFh if there is a keystroke waiting (which can then
	be read with INT 21h, AH=01h or AH=08h), otherwise AL=00h.

INT 21h AH=30h	[2.00] Check DOS Version

	This function returns AX=BX=CX=DX=0, corresponding to a
	hypothetical "DOS 0.0", but the high parts of EAX-EBX-ECX-EDX
	spell "SYSLINUX":

	EAX=59530000h EBX=4C530000h ECX=4E490000h EDX=58550000h

	This function can thus be used to distinguish running on
	SYSLINUX from running on DOS.


	++++ SYSLINUX-SPECIFIC API CALLS ++++

SYSLINUX-specific API calls are executed using INT 22h, with a
function number in AX.  INT 22h is used by DOS for internal purposes;
do not execute INT 22h under DOS.

DOS-compatible function INT 21h, AH=30h can be used to detect if the
SYSLINUX API calls are available.

Any register not specifically listed as modified is preserved;
however, future versions of SYSLINUX may add additional output
registers to existing calls.

All calls return CF=0 on success, CF=1 on failure.  The noted outputs
apply if CF=0 only unless otherwise noted.  All calls clobber the
arithmetric flags (CF, PF, AF, ZF, SF and OF) but leave all other
flags unchanged unless otherwise noted.


AX=0001h [2.00]	Get Version

	Input:	AX	0001h
	Output:	AX	number of INT 22h API functions available
		CH 	SYSLINUX major version number
		CL 	SYSLINUX minor version number
		DL 	SYSLINUX derivative ID (e.g. 32h = PXELINUX)
		ES:SI	SYSLINUX version string
		ES:DI 	SYSLINUX copyright string

	This API call returns the SYSLINUX version and API
	information.


AX=0002h [2.01] Write String

	Input:	AX	0002h
		ES:BX	null-terminated string
	Output:	None

	Writes a null-terminated string on the console.


AX=0003h [2.01] Run command

	Input:	AX	0003h
		ES:BX	null-terminated command string
	Output:	Does not return

	This API call terminates the program and executes the command
	string as if the user had entered it at the SYSLINUX command
	line.  This API call does not return.


AX=0004h [2.01] Run default command

	Input:	AX	0004h
	Output:	Does not return

	This API call terminates the program and executes the default
	command string as if the user had pressed Enter alone on the
	SYSLINUX command line.  This API call does not return.


AX=0005h [2.00] Force text mode

	Input:	AX	0005h
	Output:	None

	If the screen was in graphics mode (due to displaying a splash
	screen using the <Ctrl-X> command in a message file, or
	similar), return to text mode.


AX=0006h [2.08] Open file

	Input:	AX	0006h
		ES:SI	null-terminated filename
	Output:	SI	file handle
		EAX	length of file in bytes
		CX	file block size

	Open a file for reading.  The exact syntax of the filenames
	allowed depends on the particular SYSLINUX derivative.

	The SYSLINUX file system is block-oriented.  The size of a
	block will always be a power of two and no greater than 16K.

	Note: SYSLINUX considers a zero-length file to be nonexistent.


AX=0007h [2.08] Read file

	Input:	AX	0007h
		SI	file handle
		ES:BX	buffer
		CX	number of blocks to read
	Output:	SI	file handle, or 0 if EOF was reached

	Read blocks from a file.  Note that the file handle that is
	returned in SI may not be the same value that was passed in.

	If end of file was reached (SI=0), the file was automatically
	closed.

	The address of the buffer (ES:BX) should be at least 512-byte
	aligned.  SYSLINUX guarantees at least this alignment for the
	COMBOOT load segment or the COM32 bounce buffer.

	Keep in mind that a "file" may be a TFTP connection, and that
	leaving a file open for an extended period of time may result
	in a timeout.

	WARNING: Calling this function with an invalid file handle
	will probably crash the system.


AX=0008h [2.08] Close file

	Input:	AX	0008h
		SI	file handle
	Output:	None

	Close a file before reaching the end of file.

	WARNING: Calling this function with an invalid file handle
	will probably crash the system.


AX=0009h [2.00] Call PXE Stack [PXELINUX ONLY]

	Input:	AX	0009h
		BX	PXE function number
		ES:DI	PXE data buffer
	Output:	AX	PXE return status code

	Invoke an arbitrary PXE stack function.  On SYSLINUX/ISOLINUX,
	this function returns with an error (CF=1) and no action is
	taken.  On PXELINUX, this function always returns with CF=0
	indicating that the PXE stack was successfully invoked; check
	the status code in AX and in the first word of the data buffer
	to determine if the PXE call succeeded or not.


AX=000Ah [2.00]	Get Derivative-Specific Information

	[SYSLINUX]
	Input:	AX	000Ah
	Output:	AL	31h (SYSLINUX)
		DL	drive number
		ES:BX	pointer to partition table entry (if DL >= 80h)


	[PXELINUX]
	Input:	AX	000Ah
	Output:	AL	32h (PXELINUX)
		DX	PXE API version detected (DH=major, DL=minor)
		ES:BX	pointer to PXENV+ or !PXE structure
		FS:SI	pointer to original stack with invocation record

		Note: DX notes the API version detected by PXELINUX,
		which may be more conservative than the actual version
		available.  For exact information examine the API
		version entry in the PXENV+ structure, or the API
		version entries in the ROMID structures pointed from
		the !PXE structure.

		PXELINUX will use, and provide, the !PXE structure
		over the PXENV+ structure.  Examine the structure
		signature to determine which particular structure was
		provided.

		The FS:SI pointer points to the top of the original stack
		provided by the PXE stack, with the following values
		pushed at the time PXELINUX is started:

		[fs:si+0]	GS		<- top of stack
		[fs:si+2]	FS
		[fs:si+4]	ES
		[fs:si+6]	DS
		[fs:si+8]	EDI
		[fs:si+12]	ESI
		[fs:si+16]	EBP
		[fs:si+20]	-
		[fs:si+24]	EBX
		[fs:si+28]	EDX
		[fs:si+32]	ECX
		[fs:si+36]	EAX
		[fs:si+40]	EFLAGS
		[fs:si+44]	PXE return IP	<- t.o.s. when PXELINUX invoked
		[fs:si+46]	PXE return CS


	[ISOLINUX]
	Input:	AX	000Ah
	Output:	AL	33h (ISOLINUX)
		DL	drive number
		ES:BX	pointer to El Torito spec packet

		Note: Some very broken El Torito implementations do
		not provide the spec packet information.  If so, ES:BX
		may point to all zeroes or to garbage.  Call INT 13h,
		AX=4B01h to obtain the spec packet directly from the
		BIOS if necessary.

	This call gives information specific to a particular SYSLINUX
	derivative.  The value returned in AL is the same as is
	returned in DL by INT 22h AX=0001h.


AX=000Bh [2.00]	Get Serial Console Configuration

	Input:	AX	000Bh
	Output:	DX	Serial port I/O base (e.g. 3F8h = COM1...)
		CX	Baud rate divisor (1 = 115200 bps, 2 = 57600 bps...)
		BX	Flow control configuration bits (see syslinux.doc)

	If no serial port is configured, DX will be set to 0 and the
	other registers are undefined.


AX=000Ch [2.00]	Perform final cleanup
	Input:	AX	000Ch
		DX	derivative-specific flags (0000h = clean up all)
	Output:	Does not return

	This routine performs any "final cleanup" the boot loader
	would normally perform before loading a kernel, such as
	unloading the PXE stack in the case of PXELINUX.  AFTER
	INVOKING THIS CALL, NO OTHER API CALLS MAY BE INVOKED, NOR MAY
	THE PROGRAM TERMINATE AND RETURN TO THE BOOT LOADER.  This
	call basically tells the boot loader "get out of the way, I'll
	handle it from here."

	For COM32 images, the boot loader will continue to provide
	interrupt and BIOS call thunking services as long its memory
	areas (0x1000-0xffff, 0x100000-0x100fff) are not overwritten.
	MAKE SURE TO DISABLE INTERRUPTS, AND INSTALL NEW GDT AND IDTS
	BEFORE OVERWRITING THESE MEMORY AREAS.

	The permissible values for DX is an OR of these values:

	SYSLINUX:	0000h	Normal cleanup

	PXELINUX:	0000h	Normal cleanup
			0003h	Keep UNDI and PXE stacks loaded

	ISOLINUX:	0000h	Normal cleanup

	All other values are undefined, and may have different
	meanings in future versions of SYSLINUX.


AX=000Dh [2.08]	Cleanup and replace bootstrap code
	Input:	AX	000Dh
		DX	derivative-specific flags (see previous function)
		EDI	bootstrap code (linear address, can be in high memory)
		ECX	bootstrap code length in bytes (must fit in low mem)
		EBX(!)	initial value of EDX after bootstrap
		ESI	initial value of ESI after bootstrap
		DS	initial value of DS after bootstrap
	Output:	Does not return

	This routine performs final cleanup, then takes a piece of
	code, copies it over the primary bootstrap at address 7C00h,
	and jumps to it.  This can be used to chainload boot sectors,
	MBRs, bootstraps, etc.

	Normal boot sectors expect DL to contain the drive number,
	and, for hard drives (DL >= 80h) DS:SI to contain a pointer to
	the 16-byte partition table entry.  The memory between
	600h-7FFh is available to put the partition table entry in.

	For PXELINUX, if the PXE stack is not unloaded, all registers
	(except DS, ESI and EDX) and the stack will be set up as they
	were set up by the PXE ROM.


AX=000Eh [2.11]	Get configuration file name
	Input:	AX	0000Eh
	Output:	ES:BX	null-terminated file name string

	Returns the name of the configuration file.  Note that it is
	possible that the configuration file doesn't actually exist.

AX=000Fh [2.20] Get IPAPPEND strings [PXELINUX]
	Input:  AX	000Fh
	Output:	CX	Number of strings (currently 2)
		ES:BX	Pointer to an array of NEAR pointers in
			the same segment, one for each of the above
			strings.

	Returns the same strings that the "ipappend" option would have
	added to the command line, one for each bit of the "ipappend"
	flag value, so entry 0 is the "ip=" string and entry 1 is the
	"BOOTIF=" string.