1 files changed, 0 insertions, 152 deletions
diff --git a/gpxe/contrib/smc9462tx-flash/dp83820flash.c b/gpxe/contrib/smc9462tx-flash/dp83820flash.c
deleted file mode 100644
index 661c4291..00000000
--- a/gpxe/contrib/smc9462tx-flash/dp83820flash.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
-   Kernel module for the dp83820 flash write utility. This code was written
-   by Dave Ashley for NXTV, Inc.
-   Copyright 2004 by NXTV, Inc.
-   Written 20040219 by Dave Ashley.
-
-   This code is released under the terms of the GPL. No warranty.
-
-   THEORY: The dp83820 bootrom interface is flawed in that you can't
-   read or write a single byte at a time, and this is required in order
-   to write to flash devices like the AT29C512. So the workaround is
-   to use the chips ability to map into memory the bootrom, then the cpu
-   can directly do byte accesses.
-
-   The problem is that a "feature" of the dp83820 is that when you map
-   in the bootrom, you conveniently lose access to the PCI registers.
-   So we need to do this in kernel space and wrap every access to the
-   bootrom within interrupt_disable/restore, in case a network interrupt
-   were to come in.
-
-   This kernel module is very simple, it just creates a proc file
-   /proc/dp83820
-   If you write 3 bytes to this file you are doing a write to the flashrom:
-
-Byte 1   2    3
-   ALOW AHIGH DATA
-
-   If you write 2 bytes to this file you are doing a read from the flashrom:
-Byte 1   2
-   ALOW AHIGH
-   Then the next read from the file will return a single byte of what
-   was at that location.
-
-   You only get one shot at accessing the proc file, you need to then
-   close/open if you want to do another access. This could probably be
-   cleaned up pretty easily so more accesses can be done without having
-   to close/open the file.     
-
-*/
-
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
-#include <linux/module.h>
-
-
-#define PROCNAME "dp83820"
-
-struct pci_dev *mydev=0;
-unsigned long loc;
-unsigned char *addr=0;
-
-unsigned char lastread;
-
-
-int my_read_proc(char *buf, char **start,off_t offset,int count, int *eof,void *data)
-{
-int retval=0;
-
-	if(count>0)
-	{
-		buf[0]=lastread;
-		retval=1;
-	}
-
-	*eof=1;
-
-	return retval;
-}
-
-int my_write_proc(struct file *file, const char *buffer, unsigned long count,
-		void *data)
-{
-unsigned char *msg;
-
-unsigned long flags;
-
-	msg=(void *)buffer;
-	save_flags(flags);
-	cli();
-	pci_write_config_dword(mydev, 0x30, loc | 1);
-
-	switch(count)
-	{
-		case 2:
-			lastread=addr[msg[0] | (msg[1]<<8)];
-			break;
-		case 3:
-			addr[msg[0] | (msg[1]<<8)] = msg[2];
-			break;
-	}
-	pci_write_config_dword(mydev, 0x30, loc);
-	restore_flags(flags);
-	return count;
-}
-
-
-struct proc_dir_entry *de=0;
-
-int __init init_module(void)
-{
-int found=0;
-	mydev=0;
-	pci_for_each_dev(mydev)
-	{
-		if(mydev->vendor==0x100b && mydev->device==0x0022)
-		{
-			found=1;
-			break;
-		}
-	}
-	if(!found)
-	{
-		printk("Could not find DP83820 network device\n");
-		return ENODEV;
-	}
-
-	de=create_proc_entry(PROCNAME,0,0);
-	if(!de)
-		return -1;
-	de->data=0;
-	de->read_proc=my_read_proc;
-	de->write_proc=my_write_proc;
-
-	loc=mydev->resource[PCI_ROM_RESOURCE].start;
-	addr=ioremap_nocache(loc,0x10000);
-
-
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	if(de)
-	{
-		remove_proc_entry(PROCNAME,0);
-		de=0;
-	}
-	if(addr)
-	{
-		iounmap(addr);
-		addr=0;
-	}
-}
-