diff options
Diffstat (limited to 'missing')
| -rwxr-xr-x | missing | 145 |
1 files changed, 58 insertions, 87 deletions
@@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2012-01-06.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ scriptversion=2005-06-08.21 # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,6 +31,8 @@ if test $# -eq 0; then fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +44,7 @@ fi msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,15 +77,18 @@ Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to <bug-automake@gnu.org>." exit $? ;; @@ -103,23 +106,21 @@ Send bug reports to <bug-automake@gnu.org>." esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. @@ -135,7 +136,7 @@ esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -145,7 +146,7 @@ WARNING: \`$1' is $msg. You should only need it if touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -154,7 +155,7 @@ WARNING: \`$1' is $msg. You should only need it if touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -164,7 +165,7 @@ WARNING: \`$1' is $msg. You should only need it if test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -184,7 +185,7 @@ WARNING: \`$1' is $msg. You should only need it if while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -192,8 +193,8 @@ WARNING: \`$1' is needed, but is $msg. You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -207,80 +208,78 @@ WARNING: \`$1' is needed, but is $msg. fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -289,11 +288,17 @@ WARNING: \`$1' is $msg. You should only need it if DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -303,41 +308,6 @@ WARNING: \`$1' is $msg. You should only need it if touch $file ;; - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. @@ -356,5 +326,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: |