diff options
Diffstat (limited to 'tests/failures/usermod/08_usermod_change_user_name_open_group_failure/config/etc/login.defs')
| -rw-r--r-- | tests/failures/usermod/08_usermod_change_user_name_open_group_failure/config/etc/login.defs | 315 |
1 files changed, 0 insertions, 315 deletions
diff --git a/tests/failures/usermod/08_usermod_change_user_name_open_group_failure/config/etc/login.defs b/tests/failures/usermod/08_usermod_change_user_name_open_group_failure/config/etc/login.defs deleted file mode 100644 index 84fb3cce..00000000 --- a/tests/failures/usermod/08_usermod_change_user_name_open_group_failure/config/etc/login.defs +++ /dev/null @@ -1,315 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. -# If unspecified, some arbitrary (and possibly incorrect) value will -# be assumed. All other items are optional - if not specified then -# the described action or option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# -# Modified for Linux. --marekm - -# REQUIRED for useradd/userdel/usermod -# Directory where mailboxes reside, _or_ name of file, relative to the -# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, -# MAIL_DIR takes precedence. -# -# Essentially: -# - MAIL_DIR defines the location of users mail spool files -# (for mbox use) by appending the username to MAIL_DIR as defined -# below. -# - MAIL_FILE defines the location of the users mail spool files as the -# fully-qualified filename obtained by prepending the user home -# directory before $MAIL_FILE -# -# NOTE: This is no more used for setting up users MAIL environment variable -# which is, starting from shadow 4.0.12-1 in Debian, entirely the -# job of the pam_mail PAM modules -# See default PAM configuration files provided for -# login, su, etc. -# -# This is a temporary situation: setting these variables will soon -# move to /etc/default/useradd and the variables will then be -# no more supported -MAIL_DIR /var/mail -#MAIL_FILE .mail - -# -# Enable logging and display of /var/log/faillog login failure info. -# This option conflicts with the pam_tally PAM module. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -# WARNING: Unknown usernames may become world readable. -# See #290803 and #298773 for details about how this could become a security -# concern -LOG_UNKFAIL_ENAB no - -# -# Enable logging of successful logins -# -LOG_OK_LOGINS no - -# -# Enable "syslog" logging of su activity - in addition to sulog file logging. -# SYSLOG_SG_ENAB does the same for newgrp and sg. -# -SYSLOG_SU_ENAB yes -SYSLOG_SG_ENAB yes - -# -# If defined, all su activity is logged to this file. -# -#SULOG_FILE /var/log/sulog - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -#TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, the command name to display when running "su -". For -# example, if this is defined as "su" then a "ps" will display the -# command is "-su". If not defined, then "ps" would display the -# name of the shell actually being run, e.g. something like "-sh". -# -SU_NAME su - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# *REQUIRED* The default PATH settings, for superuser and normal users. -# -# (they are minimal, add the rest in the shell startup files) -ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin -ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -# In Debian /usr/bin/bsd-write or similar programs are setgid tty -# However, the default and recommended value for TTYPERM is still 0600 -# to not allow anyone to write to anyone else console or terminal - -# Users can still allow other people to write them by issuing -# the "mesg y" command. - -TTYGROUP tty -TTYPERM 0600 - -# -# Login configuration initializations: -# -# ERASECHAR Terminal ERASE character ('\010' = backspace). -# KILLCHAR Terminal KILL character ('\025' = CTRL/U). -# UMASK Default "umask" value. -# -# The ERASECHAR and KILLCHAR are used only on System V machines. -# -# UMASK usage is discouraged because it catches only some classes of user -# entries to system, in fact only those made through login(1), while setting -# umask in shell rc file will catch also logins through su, cron, ssh etc. -# -# At the same time, using shell rc to set umask won't catch entries which use -# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" -# user and alike. -# -# Therefore the use of pam_umask is recommended (Debian package libpam-umask) -# as the solution which catches all these cases on PAM-enabled systems. -# -# This avoids the confusion created by having the umask set -# in two different places -- in login.defs and shell rc files (i.e. -# /etc/profile). -# -# For discussion, see #314539 and #248150 as well as the thread starting at -# http://lists.debian.org/debian-devel/2005/06/msg01598.html -# -# Prefix these values with "0" to get octal, "0x" to get hexadecimal. -# -ERASECHAR 0177 -KILLCHAR 025 -# 022 is the "historical" value in Debian for UMASK when it was used -# 027, or even 077, could be considered better for privacy -# There is no One True Answer here : each sysadmin must make up his/her -# mind. -#UMASK 022 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 100 -GID_MAX 60000 - -# -# Max number of login retries if password is bad. This will most likely be -# overriden by PAM, since the default pam_unix module has it's own built -# in of 3 retries. However, this is a safe fallback in case you are using -# an authentication module that does not enforce PAM_MAXTRIES. -# -LOGIN_RETRIES 5 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh - -# -# Should login be allowed if we can't cd to the home directory? -# Default in no. -# -DEFAULT_HOME yes - -# -# If defined, this command is run when removing a user. -# It should remove any at/cron/print jobs etc. owned by -# the user to be removed (passed as the first argument). -# -#USERDEL_CMD /usr/sbin/userdel_local - -# -# This enables userdel to remove user groups if no members exist. -# -# Other former uses of this variable such as setting the umask when -# user==primary group are not used in PAM environments, thus in Debian -# -USERGROUPS_ENAB yes - -# -# Instead of the real user shell, the program specified by this parameter -# will be launched, although its visible name (argv[0]) will be the shell's. -# The program may do whatever it wants (logging, additional authentification, -# banner, ...) before running the actual shell. -# -# FAKE_SHELL /bin/fakeshell - -# -# If defined, either full pathname of a file containing device names or -# a ":" delimited list of device names. Root logins will be allowed only -# upon these devices. -# -# This variable is used by login and su. -# -#CONSOLE /etc/consoles -#CONSOLE console:tty01:tty02:tty03:tty04 - -# -# List of groups to add to the user's supplementary group set -# when logging in on the console (as determined by the CONSOLE -# setting). Default is none. -# -# Use with caution - it is possible for users to gain permanent -# access to these groups, even when not logged in on the console. -# How to do it is left as an exercise for the reader... -# -# This variable is used by login and su. -# -#CONSOLE_GROUPS floppy:audio:cdrom - -# -# Only works if compiled with MD5_CRYPT defined: -# If set to "yes", new passwords will be encrypted using the MD5-based -# algorithm compatible with the one used by recent releases of FreeBSD. -# It supports passwords of unlimited length and longer salt strings. -# Set to "no" if you need to copy encrypted passwords to other systems -# which don't understand the new algorithm. Default is "no". -# -# This variable is used by chpasswd, gpasswd and newusers. -# -#MD5_CRYPT_ENAB no - -################# OBSOLETED BY PAM ############## -# # -# These options are now handled by PAM. Please # -# edit the appropriate file in /etc/pam.d/ to # -# enable the equivelants of them. -# -############### - -#MOTD_FILE -#DIALUPS_CHECK_ENAB -#LASTLOG_ENAB -#MAIL_CHECK_ENAB -#OBSCURE_CHECKS_ENAB -#PORTTIME_CHECKS_ENAB -#SU_WHEEL_ONLY -#CRACKLIB_DICTPATH -#PASS_CHANGE_TRIES -#PASS_ALWAYS_WARN -#ENVIRON_FILE -#NOLOGINS_FILE -#ISSUE_FILE -#PASS_MIN_LEN -#PASS_MAX_LEN -#ULIMIT -#ENV_HZ -#CHFN_AUTH -#CHSH_AUTH -#FAIL_DELAY - -################# OBSOLETED ####################### -# # -# These options are no more handled by shadow. # -# # -# Shadow utilities will display a warning if they # -# still appear. # -# # -################################################### - -# CLOSE_SESSIONS -# LOGIN_STRING -# NO_PASSWORD_CONSOLE -# QMAIL_DIR - - - |