path: root/source4/heimdal/doc/standardisation/draft-jaganathan-rc4-hmac-00.txt

Internet Engineering Task Force                            K. Jaganathan
Internet-Draft                                                    L. Zhu
Expires: January 9, 2006                                       J. Brezak
                                                   Microsoft Corporation
                                                            July 8, 2005


                 The RC4-HMAC Kerberos encryption type
                    draft-jaganathan-rc4-hmac-00.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on January 9, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   The Microsoft Windows 2000 implementation of Kerberos introduces a
   new encryption type based on the RC4 encryption algorithm and using
   an MD5 HMAC for checksum.  This is offered as an alternative to using
   the existing DES based encryption types.

   The RC4-HMAC encryption types are used to ease upgrade of existing
   Windows NT environments, provide strong crypto (128-bit key lengths),



Jaganathan, et al.       Expires January 9, 2006                [Page 1]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


   and provide exportable (meet United States government export
   restriction requirements) encryption.  This document describes the
   implementation of those encryption types.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Conventions Used in This Document  . . . . . . . . . . . . . .  4
   3.  Key Generation . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  Basic Operations . . . . . . . . . . . . . . . . . . . . . . .  6
   5.  Checksum Types . . . . . . . . . . . . . . . . . . . . . . . .  8
   6.  Encryption Types . . . . . . . . . . . . . . . . . . . . . . .  9
   7.  Key Strength Negotiation . . . . . . . . . . . . . . . . . . . 12
   8.  GSSAPI Kerberos V5 Mechanism Type  . . . . . . . . . . . . . . 13
     8.1   Mechanism Specific Changes . . . . . . . . . . . . . . . . 13
     8.2   GSSAPI MIC Semantics . . . . . . . . . . . . . . . . . . . 14
     8.3   GSSAPI WRAP Semantics  . . . . . . . . . . . . . . . . . . 16
   9.  Security Considerations  . . . . . . . . . . . . . . . . . . . 20
   10.   Normative References . . . . . . . . . . . . . . . . . . . . 20
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 20
       Intellectual Property and Copyright Statements . . . . . . . . 22






























Jaganathan, et al.       Expires January 9, 2006                [Page 2]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


1.  Introduction

   The Microsoft Windows 2000 implementation of Kerberos contains new
   encryption and checksum types for two reasons: for export reasons
   early in the development process, 56 bit DES encryption could not be
   exported, and because upon upgrade from Windows NT 4.0 to Windows
   2000, accounts will not have the appropriate DES keying material to
   do the standard DES encryption.  Furthermore, 3DES is not available
   for export, and there was a desire to use a single flavor of
   encryption in the product for both US and international products.

   As a result, there are two new encryption types and one new checksum
   type introduced in Microsoft Windows 2000.






































Jaganathan, et al.       Expires January 9, 2006                [Page 3]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].














































Jaganathan, et al.       Expires January 9, 2006                [Page 4]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


3.  Key Generation

   On upgrade from existing Windows NT domains, the user accounts would
   not have a DES based key available to enable the use of DES base
   encryption types specified in RFC 1510.  The key used for RC4-HMAC is
   the same as the existing Windows NT key (NT Password Hash) for
   compatibility reasons.  Once the account password is changed, the DES
   based keys are created and maintained.  Once the DES keys are
   available DES based encryption types can be used with Kerberos.

   The RC4-HMAC String to key function is defined as follow:

      String2Key(password)

           K = MD4(UNICODE(password))

   The RC4-HMAC keys are generated by using the Windows UNICODE version
   of the password.  Each Windows UNICODE character is encoded in
   little-endian format of 2 octets each.  Then performing an MD4
   [RFC1320] hash operation on just the UNICODE characters of the
   password (not including the terminating zero octets).

   For an account with a password of "foo", this String2Key("foo") will
   return:

           0xac, 0x8e, 0x65, 0x7f, 0x83, 0xdf, 0x82, 0xbe,
           0xea, 0x5d, 0x43, 0xbd, 0xaf, 0x78, 0x00, 0xcc
























Jaganathan, et al.       Expires January 9, 2006                [Page 5]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


4.  Basic Operations

   The MD5 HMAC function is defined in [RFC2104].  It is used in this
   encryption type for checksum operations.  Refer to [RFC2104] for
   details on its operation.  In this document this function is referred
   to as HMAC(Key, Data) returning the checksum using the specified key
   on the data.

   The basic MD5 hash operation is used in this encryption type and
   defined in [RFC1321].  In this document this function is referred to
   as MD5(Data) returning the checksum of the data.

   RC4 is a stream cipher licensed by RSA Data Security .  In this
   document the function is referred to as RC4(Key, Data) returning the
   encrypted data using the specified key on the data.

   These encryption types use key derivation.  With each message, the
   message type (T) is used as a component of the keying material.  This
   table summarizes the different key derivation values used in the
   various operations.  Note that these differ from the key derivations
   used in other Kerberos encryption types.  T = the message type,
   encoded as a little-endian four byte integer.





























Jaganathan, et al.       Expires January 9, 2006                [Page 6]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


          1.  AS-REQ PA-ENC-TIMESTAMP padata timestamp, encrypted with
          the client key (T=1)
          2.  AS-REP Ticket and TGS-REP Ticket (includes TGS session key
          or application session key), encrypted with the service key
          (T=2)
          3.  AS-REP encrypted part (includes TGS session key or
          application session key), encrypted with the client key (T=8)
          4.  TGS-REQ KDC-REQ-BODY AuthorizationData, encrypted with the
          TGS session key (T=4)
          5.  TGS-REQ KDC-REQ-BODY AuthorizationData, encrypted with the
          TGS authenticator subkey (T=5)
          6.  TGS-REQ PA-TGS-REQ padata AP-REQ Authenticator cksum,
          keyed with the TGS session key (T=6)
          7.  TGS-REQ PA-TGS-REQ padata AP-REQ Authenticator (includes
          TGS authenticator subkey), encrypted with the TGS session key
           T=7)
          8.  TGS-REP encrypted part (includes application session key),
          encrypted with the TGS session key (T=8)
          9.  TGS-REP encrypted part (includes application session key),
          encrypted with the TGS authenticator subkey (T=8)
          10.  AP-REQ Authenticator cksum, keyed with the application
          session key (T=10)
          11.  AP-REQ Authenticator (includes application authenticator
          subkey), encrypted with the application session key (T=11)
          12.  AP-REP encrypted part (includes application session
          subkey), encrypted with the application session key (T=12)
          13.  KRB-PRIV encrypted part, encrypted with a key chosen by
          the application. Also for data encrypted with GSS Wrap (T=13)
          14.  KRB-CRED encrypted part, encrypted with a key chosen by
          the application (T=14)
          15.  KRB-SAFE cksum, keyed with a key chosen by the
          application. Also for data signed in GSS MIC (T=15)

          Relative to RFC-1964 key uses:

         T = 0 in the generation of sequence number for the MIC token
         T = 0 in the generation of sequence number for the WRAP token
         T = 0 in the generation of encrypted data for the WRAPPED token

   All strings in this document are ASCII unless otherwise specified.
   The lengths of ASCII encoded character strings include the trailing
   terminator character (0).  The concat(a,b,c,...) function will return
   the logical concatenation (left to right) of the values of the
   arguments.  The nonce(n) function returns a pseudo-random number of
   "n" octets.






Jaganathan, et al.       Expires January 9, 2006                [Page 7]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


5.  Checksum Types

   There is one checksum type used in this encryption type.  The
   Kerberos constant for this type is:

           #define KERB_CHECKSUM_HMAC_MD5 (-138)

      The function is defined as follows:

      K - is the Key
      T - the message type, encoded as a little-endian four byte integer

      CHKSUM(K, T, data)

           Ksign = HMAC(K, "signaturekey")  //includes zero octet at end
           tmp = MD5(concat(T, data))
           CHKSUM = HMAC(Ksign, tmp)


































Jaganathan, et al.       Expires January 9, 2006                [Page 8]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


6.  Encryption Types

   There are two encryption types used in these encryption types.  The
   Kerberos constants for these types are:

           #define KERB_ETYPE_RC4_HMAC             23
           #define KERB_ETYPE_RC4_HMAC_EXP         24

   The basic encryption function is defined as follow:

     T = the message type, encoded as a little-endian four byte integer.

           OCTET L40[14] = "fortybits";
           OCTET SK = "signaturekey";

      The header field on the encrypted data in KDC messages is:

           typedef struct _RC4_MDx_HEADER {
               OCTET Checksum[16];
               OCTET Confounder[8];
           } RC4_MDx_HEADER, *PRC4_MDx_HEADER;


           ENCRYPT (K, export, T, data)
           {
               struct EDATA {
                   struct HEADER {
                           OCTET Checksum[16];
                           OCTET Confounder[8];
                   } Header;
                   OCTET Data[0];
               } edata;

               if (export){
                   *((DWORD *)(L40+10)) = T;
                   HMAC (K, L40, 10 + 4, K1);
               }
               else
               {
                   HMAC (K, &T, 4, K1);
               }
               memcpy (K2, K1, 16);
               if (export) memset (K1+7, 0xAB, 9);

               nonce (edata.Confounder, 8);
               memcpy (edata.Data, data);

               edata.Checksum = HMAC (K2, edata);



Jaganathan, et al.       Expires January 9, 2006                [Page 9]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


               K3 = HMAC (K1, edata.Checksum);

               RC4 (K3, edata.Confounder);
               RC4 (K3, data.Data);
           }

           DECRYPT (K, export, T, edata)
           {
               // edata looks like
               struct EDATA {
                   struct HEADER {
                           OCTET Checksum[16];
                           OCTET Confounder[8];
                   } Header;
                   OCTET Data[0];
               } edata;

               if (export){
                   *((DWORD *)(L40+10)) = T;
                   HMAC (K, L40, 14, K1);
               }
               else
               {
                   HMAC (K, &T, 4, K1);
               }
               memcpy (K2, K1, 16);
               if (export) memset (K1+7, 0xAB, 9);

               K3 = HMAC (K1, edata.Checksum);

               RC4 (K3, edata.Confounder);
               RC4 (K3, edata.Data);


               // verify generated and received checksums
             checksum = HMAC (K2, concat(edata.Confounder, edata.Data));
               if (checksum != edata.Checksum)
                   printf("CHECKSUM ERROR  !!!!!!\n");
           }

   The KDC message is encrypted using the ENCRYPT function not including
   the Checksum in the RC4_MDx_HEADER.

   The character constant "fortybits" evolved from the time when a 40-
   bit key length was all that was exportable from the United States.
   It is now used to recognize that the key length is of "exportable"
   length.  In this description, the key size is actually 56-bits.




Jaganathan, et al.       Expires January 9, 2006               [Page 10]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


   The pseudo-random operation [RFC3961] for both enctypes above is
   defined as follows:

           pseudo-random(K, S) = HMAC-SHA1(K, S)

   where K is the protocol key and S is the input octet string.  HMAC-
   SHA1 is defined in [RFC2104] and the output of HMAC-SHA1 is the 20-
   octet digest.











































Jaganathan, et al.       Expires January 9, 2006               [Page 11]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


7.  Key Strength Negotiation

   A Kerberos client and server can negotiate over key length if they
   are using mutual authentication.  If the client is unable to perform
   full strength encryption, it may propose a key in the "subkey" field
   of the authenticator, using a weaker encryption type.  The server
   must then either return the same key or suggest its own key in the
   subkey field of the AP reply message.  The key used to encrypt data
   is derived from the key returned by the server.  If the client is
   able to perform strong encryption but the server is not, it may
   propose a subkey in the AP reply without first being sent a subkey in
   the authenticator.







































Jaganathan, et al.       Expires January 9, 2006               [Page 12]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


8.  GSSAPI Kerberos V5 Mechanism Type

8.1   Mechanism Specific Changes

   The GSSAPI per-message tokens also require new checksum and
   encryption types.  The GSS-API per-message tokens are adapted to
   support these new encryption types.  See [RFC1964] Section 1.2.2.

   The only support quality of protection is:

         #define GSS_KRB5_INTEG_C_QOP_DEFAULT    0x0

   When using this RC4 based encryption type, the sequence number is
   always sent in big-endian rather than little-endian order.

   The Windows 2000 implementation also defines new GSSAPI flags in the
   initial token passed when initializing a security context.  These
   flags are passed in the checksum field of the authenticator.  See
   [RFC1964] Section 1.1.1.

   GSS_C_DCE_STYLE - This flag was added for use with Microsoft's
   implementation of DCE RPC, which initially expected three legs of
   authentication.  Setting this flag causes an extra AP reply to be
   sent from the client back to the server after receiving the server's
   AP reply.  In addition, the context negotiation tokens do not have
   GSSAPI per message tokens - they are raw AP messages that do not
   include object identifiers.

           #define GSS_C_DCE_STYLE                 0x1000

   GSS_C_IDENTIFY_FLAG - This flag allows the client to indicate to the
   server that it should only allow the server application to identify
   the client by name and ID, but not to impersonate the client.

           #define GSS_C_IDENTIFY_FLAG             0x2000

   GSS_C_EXTENDED_ERROR_FLAG - Setting this flag indicates that the
   client wants to be informed of extended error information.  In
   particular, Windows 2000 status codes may be returned in the data
   field of a Kerberos error message.  This allows the client to
   understand a server failure more precisely.  In addition, the server
   may return errors to the client that are normally handled at the
   application layer in the server, in order to let the client try to
   recover.  After receiving an error message, the client may attempt to
   resubmit an AP request.

           #define GSS_C_EXTENDED_ERROR_FLAG       0x4000




Jaganathan, et al.       Expires January 9, 2006               [Page 13]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


   These flags are only used if a client is aware of these conventions
   when using the SSPI on the Windows platform; they are not generally
   used by default.

   When NetBIOS addresses are used in the GSSAPI, they are identified by
   the GSS_C_AF_NETBIOS value.  This value is defined as:

           #define GSS_C_AF_NETBIOS                0x14

   NetBios addresses are 16-octet addresses typically composed of 1 to
   15 characters, trailing blank (ASCII char 20) filled, with a 16-th
   octet of 0x0.

8.2   GSSAPI MIC Semantics

   The GSSAPI checksum type and algorithm is defined in Section 5.  Only
   the first 8 octets of the checksum are used.  The resulting checksum
   is stored in the SGN_CKSUM field .  See [RFC1964] Section 1.2 for
   GSS_GetMIC() and GSS_Wrap(conf_flag=FALSE).

   The GSS_GetMIC token has the following format:

        Byte no         Name        Description
        0..1           TOK_ID     Identification field.
                                  Tokens emitted by GSS_GetMIC() contain
                                  the hex value 01 01 in this field.
        2..3           SGN_ALG    Integrity algorithm indicator.
                                  11 00 - HMAC
        4..7           Filler     Contains ff ff ff ff
        8..15          SND_SEQ    Sequence number field.
        16..23         SGN_CKSUM  Checksum of "to-be-signed data",
                                  calculated according to algorithm
                                  specified in SGN_ALG field.

   The MIC mechanism used for GSS MIC based messages is as follow:

           GetMIC(Kss, direction, export, seq_num, data)
           {
                   struct Token {
                          struct Header {
                                 OCTET TOK_ID[2];
                                 OCTET SGN_ALG[2];
                                 OCTET Filler[4];
                            };
                          OCTET SND_SEQ[8];
                          OCTET SGN_CKSUM[8];
                   } Token;




Jaganathan, et al.       Expires January 9, 2006               [Page 14]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


                   Token.TOK_ID = 01 01;
                   Token.SGN_SLG = 11 00;
                   Token.Filler = ff ff ff ff;

                   // Create the sequence number

                   if (direction == sender_is_initiator)
                   {
                           memset(Token.SEND_SEQ+4, 0xff, 4)
                   }
                   else if (direction == sender_is_acceptor)
                   {
                           memset(Token.SEND_SEQ+4, 0, 4)
                   }
                   Token.SEND_SEQ[0] = (seq_num & 0xff000000) >> 24;
                   Token.SEND_SEQ[1] = (seq_num & 0x00ff0000) >> 16;
                   Token.SEND_SEQ[2] = (seq_num & 0x0000ff00) >> 8;
                   Token.SEND_SEQ[3] = (seq_num & 0x000000ff);

                   // Derive signing key from session key

                   Ksign = HMAC(Kss, "signaturekey");
                                     // length includes terminating null

                   // Generate checksum of message - SGN_CKSUM
                   //   Key derivation salt = 15

                   Sgn_Cksum = MD5((int32)15, Token.Header, data);

                   // Save first 8 octets of HMAC Sgn_Cksum

                   Sgn_Cksum = HMAC(Ksign, Sgn_Cksum);
                   memcpy(Token.SGN_CKSUM, Sgn_Cksum, 8);

                   // Encrypt the sequence number

                   // Derive encryption key for the sequence number
                   //   Key derivation salt = 0

                   if (exportable)
                   {
                           Kseq = HMAC(Kss, "fortybits", (int32)0);
                                        // len includes terminating null
                           memset(Kseq+7, 0xab, 7)
                   }
                   else
                   {
                            Kseq = HMAC(Kss, (int32)0);



Jaganathan, et al.       Expires January 9, 2006               [Page 15]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


                   }
                   Kseq = HMAC(Kseq, Token.SGN_CKSUM);

                   // Encrypt the sequence number

                   RC4(Kseq, Token.SND_SEQ);
           }


8.3   GSSAPI WRAP Semantics

   There are two encryption keys for GSSAPI message tokens, one that is
   128 bits in strength, and one that is 56 bits in strength as defined
   in Section 6.

   All padding is rounded up to 1 byte.  One byte is needed to say that
   there is 1 byte of padding.  The DES based mechanism type uses 8 byte
   padding.  See [RFC1964] Section 1.2.2.3.

   The RC4-HMAC GSS_Wrap() token has the following format:


      Byte no          Name         Description
        0..1           TOK_ID       Identification field.
                                    Tokens emitted by GSS_Wrap() contain
                                    the hex value 02 01 in this field.
        2..3           SGN_ALG      Checksum algorithm indicator.
                                    11 00 - HMAC
        4..5           SEAL_ALG     ff ff - none
                                    00 00 - DES-CBC
                                    10 00 - RC4
        6..7           Filler       Contains ff ff
        8..15          SND_SEQ      Encrypted sequence number field.
        16..23         SGN_CKSUM    Checksum of plaintext padded data,
                                    calculated according to algorithm
                                    specified in SGN_ALG field.
        24..31         Confounder   Random confounder
        32..last       Data         encrypted or plaintext padded data

   The encryption mechanism used for GSS wrap based messages is as
   follow:


           WRAP(Kss, encrypt, direction, export, seq_num, data)
           {
                   struct Token {          // 32 octets
                          struct Header {
                                 OCTET TOK_ID[2];



Jaganathan, et al.       Expires January 9, 2006               [Page 16]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


                                 OCTET SGN_ALG[2];
                                 OCTET SEAL_ALG[2];
                                 OCTET Filler[2];
                          };
                          OCTET SND_SEQ[8];
                          OCTET SGN_CKSUM[8];
                            OCTET Confounder[8];
                   } Token;


                   Token.TOK_ID = 02 01;
                   Token.SGN_SLG = 11 00;
                   Token.SEAL_ALG = (no_encrypt)? ff ff : 10 00;
                   Token.Filler = ff ff;

                   // Create the sequence number

                   if (direction == sender_is_initiator)
                   {
                           memset(&Token.SEND_SEQ[4], 0xff, 4)
                   }
                   else if (direction == sender_is_acceptor)
                   {
                           memset(&Token.SEND_SEQ[4], 0, 4)
                   }
                   Token.SEND_SEQ[0] = (seq_num & 0xff000000) >> 24;
                   Token.SEND_SEQ[1] = (seq_num & 0x00ff0000) >> 16;
                   Token.SEND_SEQ[2] = (seq_num & 0x0000ff00) >> 8;
                   Token.SEND_SEQ[3] = (seq_num & 0x000000ff);

                   // Generate random confounder

                   nonce(&Token.Confounder, 8);

                   // Derive signing key from session key

                   Ksign = HMAC(Kss, "signaturekey");

                   // Generate checksum of message -
                   //  SGN_CKSUM + Token.Confounder
                   //   Key derivation salt = 15

                   Sgn_Cksum = MD5((int32)15, Token.Header,
                                   Token.Confounder);

                   // Derive encryption key for data
                   //   Key derivation salt = 0




Jaganathan, et al.       Expires January 9, 2006               [Page 17]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


                   for (i = 0; i < 16; i++) Klocal[i] = Kss[i] ^ 0xF0;
                                                           // XOR
                   if (exportable)
                   {
                           Kcrypt = HMAC(Klocal, "fortybits", (int32)0);
                                       // len includes terminating null
                           memset(Kcrypt+7, 0xab, 7);
                   }
                   else
                   {
                           Kcrypt = HMAC(Klocal, (int32)0);
                     }

                   // new encryption key salted with seq

                   Kcrypt = HMAC(Kcrypt, (int32)seq);

                   // Encrypt confounder (if encrypting)

                   if (encrypt)
                           RC4(Kcrypt, Token.Confounder);

                   // Sum the data buffer

                   Sgn_Cksum += MD5(data);         // Append to checksum

                   // Encrypt the data (if encrypting)

                   if (encrypt)
                           RC4(Kcrypt, data);

                   // Save first 8 octets of HMAC Sgn_Cksum

                   Sgn_Cksum = HMAC(Ksign, Sgn_Cksum);
                   memcpy(Token.SGN_CKSUM, Sgn_Cksum, 8);

                   // Derive encryption key for the sequence number
                   //   Key derivation salt = 0

                   if (exportable)
                   {
                           Kseq = HMAC(Kss, "fortybits", (int32)0);
                                       // len includes terminating null
                           memset(Kseq+7, 0xab, 7)
                   }
                   else
                   {
                           Kseq = HMAC(Kss, (int32)0);



Jaganathan, et al.       Expires January 9, 2006               [Page 18]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


                   }
                   Kseq = HMAC(Kseq, Token.SGN_CKSUM);

                   // Encrypt the sequence number

                   RC4(Kseq, Token.SND_SEQ);

                   // Encrypted message = Token + Data
           }

   The character constant "fortybits" evolved from the time when a 40-
   bit key length was all that was exportable from the United States.
   It is now used to recognize that the key length is of "exportable"
   length.  In this description, the key size is actually 56-bits.





































Jaganathan, et al.       Expires January 9, 2006               [Page 19]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


9.  Security Considerations

   Care must be taken in implementing this encryption type because it
   uses a stream cipher.  If a different IV isn't used in each direction
   when using a session key, the encryption is weak.  By using the
   sequence number as an IV, this is avoided.

10.  Normative References

   [RFC1320]  Rivest, R., "The MD4 Message-Digest Algorithm", RFC 1320,
              April 1992.

   [RFC1321]  Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
              April 1992.

   [RFC1510]  Kohl, J. and B. Neuman, "The Kerberos Network
              Authentication Service (V5)", RFC 1510, September 1993.

   [RFC1964]  Linn, J., "The Kerberos Version 5 GSS-API Mechanism",
              RFC 1964, June 1996.

   [RFC2104]  Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104,
              February 1997.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3961]  Raeburn, K., "Encryption and Checksum Specifications for
              Kerberos 5", RFC 3961, February 2005.


Authors' Addresses

   Karthik Jaganathan
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: karthikj@microsoft.com










Jaganathan, et al.       Expires January 9, 2006               [Page 20]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


   Larry Zhu
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: lzhu@microsoft.com


   John Brezak
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: jbrezak@microsoft.com



































Jaganathan, et al.       Expires January 9, 2006               [Page 21]

Internet-Draft    The RC4-HMAC Kerberos encryption type        July 2005


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Jaganathan, et al.       Expires January 9, 2006               [Page 22]