1 files changed, 119 insertions, 0 deletions
diff --git a/ctdb/tests/UNIT/eventscripts/scripts/11.natgw.sh b/ctdb/tests/UNIT/eventscripts/scripts/11.natgw.sh
new file mode 100644
index 00000000000..75b2771899c
--- /dev/null
+++ b/ctdb/tests/UNIT/eventscripts/scripts/11.natgw.sh
@@ -0,0 +1,119 @@
+setup ()
+{
+	debug "Setting up NAT gateway"
+
+	natgw_nodes="${CTDB_BASE}/natgw_nodes"
+
+	ctdb_set_pnn
+}
+
+# A separate function for this makes sense because it can be done
+# multiple times per test
+setup_ctdb_natgw ()
+{
+	# Read from stdin
+	while read _ip _opts ; do
+		case "$_opts" in
+		master)
+			export FAKE_CTDB_NATGW_MASTER="$_ip"
+			echo "$_ip"
+			;;
+		slave-only)
+			printf "%s\tslave-only\n" "$_ip"
+			;;
+		*)
+			echo "$_ip"
+			;;
+		esac
+	done >"$natgw_nodes"
+
+	# Assume all of the nodes are on a /24 network and have IPv4
+	# addresses:
+	read _ip <"$natgw_nodes"
+
+	setup_script_options <<EOF
+CTDB_NATGW_NODES="$natgw_nodes"
+CTDB_NATGW_PRIVATE_NETWORK="${_ip%.*}.0/24"
+# These are fixed.  Probably don't use the same network for the
+# private node IPs.  To unset the default gateway just set it to
+# "".  :-)
+CTDB_NATGW_PUBLIC_IP="10.1.1.121/24"
+CTDB_NATGW_PUBLIC_IFACE="eth1"
+CTDB_NATGW_DEFAULT_GATEWAY="10.1.1.254"
+EOF
+}
+
+ok_natgw_master_ip_addr_show ()
+{
+	_mac=$(echo "$CTDB_NATGW_PUBLIC_IFACE" |
+	       cksum |
+	       sed -r -e 's@(..)(..)(..).*@fe:fe:fe:\1:\2:\3@')
+
+	# This is based on CTDB_NATGW_PUBLIC_IP
+	_brd="10.1.1.255"
+
+	ok <<EOF
+1: ${CTDB_NATGW_PUBLIC_IFACE}: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
+    link/ether ${_mac} brd ff:ff:ff:ff:ff:ff
+    inet ${CTDB_NATGW_PUBLIC_IP} brd ${_brd} scope global ${CTDB_NATGW_PUBLIC_IFACE}
+       valid_lft forever preferred_lft forever
+EOF
+}
+
+ok_natgw_slave_ip_addr_show ()
+{
+	_mac=$(echo "$CTDB_NATGW_PUBLIC_IFACE" |
+	       cksum |
+	       sed -r -e 's@(..)(..)(..).*@fe:fe:fe:\1:\2:\3@')
+
+	ok <<EOF
+1: ${CTDB_NATGW_PUBLIC_IFACE}: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
+    link/ether ${_mac} brd ff:ff:ff:ff:ff:ff
+EOF
+}
+
+ok_natgw_master_static_routes ()
+{
+	_nl="
+"
+	_t=""
+	for _i in $CTDB_NATGW_STATIC_ROUTES ; do
+		# This is intentionally different to the code in 11.natgw ;-)
+		case "$_i" in
+		*@*)
+			_net=$(echo "$_i" | sed -e 's|@.*||')
+			_gw=$(echo "$_i" | sed -e 's|.*@||')
+			;;
+		*)
+			_net="$_i"
+			_gw="$CTDB_NATGW_DEFAULT_GATEWAY"
+		esac
+
+		[ -n "$_gw" ] || continue
+		_t="${_t}${_t:+${_nl}}"
+		_t="${_t}${_net} via ${_gw} dev ethXXX  metric 10 "
+	done
+	_t=$(echo "$_t" | sort)
+	ok "$_t"
+}
+
+ok_natgw_slave_static_routes ()
+{
+	_nl="
+"
+	_t=""
+	for _i in $CTDB_NATGW_STATIC_ROUTES ; do
+		# This is intentionally different to the code in 11.natgw ;-)
+		_net=$(echo "$_i" | sed -e 's|@.*||')
+
+		# The interface for the private network isn't
+		# specified as part of the NATGW configuration and
+		# isn't part of the command to add the route.  It is
+		# implicitly added by "ip route" but our stub doesn't
+		# do this and adds "ethXXX".
+		_t="${_t}${_t:+${_nl}}"
+		_t="${_t}${_net} via ${FAKE_CTDB_NATGW_MASTER} dev ethXXX  metric 10 "
+	done
+	_t=$(echo "$_t" | sort)
+	ok "$_t"
+}