Fix typos in the board-js2x folder

Found with the "codespell" utility. I kept "busses" which codespell
also complains about since it seems to be an old but still valid
plural of the word "bus".

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>

8 files changed, 20 insertions, 21 deletions

diff --git a/board-js2x/include/nvramlog.h b/board-js2x/include/nvramlog.h
index 5d6c5d1..ce2fbd4 100644
--- a/board-js2x/include/nvramlog.h
+++ b/board-js2x/include/nvramlog.h
@@ -21,7 +21,7 @@
  *	01h	- checksum	( 1 byte)
  *	02h	- length	( 2 byte) value = 1st_byte*256 + 2nd_byte
  *	04h	- name		(12 byte)
- *	space for partiton header = 16 byte
+ *	space for partition header = 16 byte
  *
  *	Log Header
  *	10h	- offset	( 2 byte) from Partition Header to Data Section
diff --git a/board-js2x/llfw/u4mem.c b/board-js2x/llfw/u4mem.c
index 68bba56..0a1a4bd 100644
--- a/board-js2x/llfw/u4mem.c
+++ b/board-js2x/llfw/u4mem.c
@@ -265,7 +265,7 @@ static const uint32_t SUBVER = 1;
 #define I2C_START		0x50
 
 /*
- * Index to the speed dependend DIMM settings
+ * Index to the speed dependent DIMM settings
  */
 enum
 {
@@ -297,8 +297,8 @@ typedef struct
 	uint32_t m_pop_u32;		// set if bank is populated
 	uint32_t m_bank_u32;		// bank number
 	uint32_t m_clmsk_u32;		// mask of supported CAS latencies
-	uint32_t m_clcnt_u32;		// number of supporetd CAS latencies
-	uint32_t m_clval_pu32[NUM_CL];	// values of supporeted CAS latencies
+	uint32_t m_clcnt_u32;		// number of supported CAS latencies
+	uint32_t m_clval_pu32[NUM_CL];	// values of supported CAS latencies
 	uint32_t m_speed_pu32[NUM_CL];	// speed (Mhz) at CAS latency of same index
 	uint32_t m_size_u32;		// chip size in Mb
 	uint32_t m_rank_u32;		// # of ranks, total size = chip size*rank
@@ -937,7 +937,7 @@ ddr2_setupDIMMcfg( void )
 	uint32_t  i, j, e, b;
 
 	/*
-	 * check wether on board DIMM slot population is valid
+	 * check whether on board DIMM slot population is valid
 	 */
 	e = 0;
 	b = 0;
@@ -1156,7 +1156,7 @@ ddr2_setupDIMMcfg( void )
 	}
 
 	/*
-	 * check wether cl values are supported by U4
+	 * check whether cl values are supported by U4
 	 */
 	for( i = 0; i < m_gendimm.m_clcnt_u32; i++ ) {
 
@@ -1487,7 +1487,7 @@ u4_group2banks( uint32_t *bidx )
 	 */
 
 	/*
-	 * check wether DIMM banks may be grouped
+	 * check whether DIMM banks may be grouped
 	 */
 	if( ( ( ( bidx[0] + bidx[1] ) & 0x1 )           != 0 ) &&
 	    ( u4_Dcmp( &m_dimm[didx0], &m_dimm[didx1] ) == 0 ) ) {
@@ -2461,7 +2461,7 @@ u4_MemInitSequence( uint32_t tRP, uint32_t tWR, uint32_t tRFC, uint32_t CL,
 }
 
 /*
- * static DIMM configuartion settings
+ * static DIMM configuration settings
  */
 static reg_statics_t reg_statics_maui[NUM_SPEED_IDX] = {
 	{	/* 400 Mhz */
diff --git a/board-js2x/rtas/rtas_flash.c b/board-js2x/rtas/rtas_flash.c
index 189878d..aa61603 100644
--- a/board-js2x/rtas/rtas_flash.c
+++ b/board-js2x/rtas/rtas_flash.c
@@ -496,7 +496,7 @@ rtas_update_flash(rtas_args_t *rtas_args)
 #endif
 
 	/* from SLOF we pass a second (unofficial) parameter, if this parameter is 1, we do not
-	 * check wether we are on permanent side. Needed for update-flash -c to work! */
+	 * check whether we are on permanent side. Needed for update-flash -c to work! */
 	if ((rtas_args->nargs > 1) && (rtas_args->args[1] == 1))
 		perm_check = 0;
 
diff --git a/board-js2x/slof/OF.fs b/board-js2x/slof/OF.fs
index f8cde85..dcc67a5 100644
--- a/board-js2x/slof/OF.fs
+++ b/board-js2x/slof/OF.fs
@@ -26,8 +26,8 @@ uni-n-version 4 rshift  dup 3 = CONSTANT u3?  4 = CONSTANT u4?
 \ if (f4000682 >> 4) == 1... it is a bimini...
 f4000682 rb@ 4 rshift 1 = CONSTANT bimini?
 
-\ to decide wether vga initialisation using bios emulation should be attempted,
-\ we need to know wether a vga-device was found during pci-scan.
+\ to decide whether vga initialisation using bios emulation should be attempted,
+\ we need to know whether a vga-device was found during pci-scan.
 \ If it is found, this value will be set to the device's phandle
 0 value vga-device-node?
 
@@ -331,7 +331,7 @@ check-for-nvramrc
 
 8a8 cp
 
-\ check wether a VGA device was found during pci scan, if it was
+\ check whether a VGA device was found during pci scan, if it was
 \ try to initialize it and create the needed device-nodes
 0 value biosemu-vmem
 100000 value biosemu-vmem-size
@@ -538,7 +538,7 @@ cr
 #include "copyright-oss.fs"
 cr
 
-\ this CATCH is to ensure the code bellow always executes:  boot may ABORT!
+\ this CATCH is to ensure the code below always executes:  boot may ABORT!
 ' start-it CATCH drop
 
 : boot
diff --git a/board-js2x/slof/citrine-disk.fs b/board-js2x/slof/citrine-disk.fs
index 146e7ec..a0c280e 100644
--- a/board-js2x/slof/citrine-disk.fs
+++ b/board-js2x/slof/citrine-disk.fs
@@ -29,7 +29,7 @@ get-parent CONSTANT ppack
 
 0 pci-alias-disk
 
-\ Requiered interface for deblocker
+\ Required interface for deblocker
 
 200   CONSTANT block-size
 40000 CONSTANT max-transfer 
diff --git a/board-js2x/slof/pci-bridge_1022_7460.fs b/board-js2x/slof/pci-bridge_1022_7460.fs
index 67fe64e..d705f0d 100644
--- a/board-js2x/slof/pci-bridge_1022_7460.fs
+++ b/board-js2x/slof/pci-bridge_1022_7460.fs
@@ -108,7 +108,7 @@ INCLUDE freq.fs
 
    pci-next-mmio @ 100000 #aligned ( base )
 
-   \ Sequence prescribed for resetting the EHCI contoller
+   \ Sequence prescribed for resetting the EHCI controller
 
    \ If Run/Stop bit (ECAP30 bit 0) is 1
    \   Set Run/Stop bit to 0
@@ -179,7 +179,7 @@ my-space pci-class-name type cr
 : pci-bridge-generic-setup-amd8111 ( addr -- )
    pci-device-slots >r             \ save the slot array on return stack
    dup pci-common-props            \ set the common properties before scanning the bus
-   s" pci" device-type             \ the type is allways "pci"
+   s" pci" device-type             \ the type is always "pci"
    dup pci-bridge-probe-amd8111    \ find all device connected to it
    dup assign-all-bridge-bars      \ set up all memory access BARs
    dup pci-set-irq-line            \ set the interrupt pin
diff --git a/board-js2x/slof/pci-class_03.fs b/board-js2x/slof/pci-class_03.fs
index 05c8eb6..86f7265 100644
--- a/board-js2x/slof/pci-class_03.fs
+++ b/board-js2x/slof/pci-class_03.fs
@@ -44,12 +44,11 @@ my-space a1000000 or encode-int+ \ non-relocatable, aliased I/O space
 
 s" reg" property \ store "reg" property
 
-\ check wether we have already found a vga-device (vga-device-node? != 0) and if
-\ this device has Expansion ROM
+\ check whether we have already found a vga-device (vga-device-node? != 0)
+\ and if this device has an expansion ROM
 vga-device-node? 0= 30 config-l@ 0<> AND IF
    \ remember this vga device's phandle
    get-node to vga-device-node?
 THEN
 
 cr
-
diff --git a/board-js2x/slof/rtas.fs b/board-js2x/slof/rtas.fs
index 0a90c29..a4130c6 100644
--- a/board-js2x/slof/rtas.fs
+++ b/board-js2x/slof/rtas.fs
@@ -202,8 +202,8 @@ blist 50 erase
    2 rtas-cb rtas>nargs l!
    1 rtas-cb rtas>nret l!
    rtas-cb rtas>args0 l!
-   \ special unofficial parameter: if this is set to 1, the rtas function will not check, wether
-   \ we are on the perm side... this is needed for "update-flash -c" to work...
+   \ special unofficial parameter: if this is set to 1, the rtas function will not check
+   \ whether we are on the perm side... this is needed for "update-flash -c" to work...
    1 rtas-cb rtas>args1 l!
    enter-rtas
    rtas-cb rtas>args2 l@