1 files changed, 137 insertions, 0 deletions
diff --git a/java/tools/bin/perf-report b/java/tools/bin/perf-report
new file mode 100755
index 0000000000..7de3f2b602
--- /dev/null
+++ b/java/tools/bin/perf-report
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+# This will run the following test cases defined below and produce
+# a report in tabular format.
+
+QUEUE="queue;{create:always,node:{x-declare:{auto-delete:true}}}"
+DURA_QUEUE="dqueue;{create:always,node:{durable:true,x-declare:{auto-delete:true}}}"
+TOPIC="amq.topic/test"
+DURA_TOPIC="amq.topic/test;{create:always,link:{durable:true}}"
+
+COMMON_CONFIG="-server -Durl=amqp://guest:guest@clientid/testpath?brokerlist='tcp://localhost:5672'"
+
+waitfor() { until grep -a -l "$2" $1 >/dev/null 2>&1 ; do sleep 1 ; done ; }
+cleanup()
+{  
+  pids=`ps aux | grep java | grep Perf | awk '{print $2}'`
+  if [ "$pids" != "" ]; then
+    kill -3 $pids
+    kill -9 $pids >/dev/null 2>&1
+  fi
+}
+
+# $1 test name
+# $2 consumer options
+# $3 producer options
+run_testcase()
+{  
+  sh run-sub $COMMON_CONFIG $2 > sub.out &
+  sh run-pub $COMMON_CONFIG $3 > pub.out &
+  waitfor pub.out "Controller: Completed the test"
+  sleep 2 #give a grace period to shutdown
+  print_result $1
+  mv pub.out $1.pub.out
+  mv sub.out $1.sub.out
+}
+
+print_result()
+{
+  prod_rate=`cat pub.out | grep "Avg Producer rate" | awk '{print $5}'`
+  sys_rate=`cat pub.out | grep "System Throughput" | awk '{print $4}'`
+  cons_rate=`cat pub.out | grep "Avg Consumer rate" | awk '{print $5}'` 
+  avg_latency=`cat pub.out | grep "Avg System Latency" | awk '{print $5}'`
+  min_latency=`cat pub.out | grep "Min System Latency" | awk '{print $5}'`
+  max_latency=`cat pub.out | grep "Max System Latency" | awk '{print $5}'`
+
+  printf "|%-15s|%15.2f|%13.2f|%13.2f|%11.2f|%11.2f|%11.2f|\n" $1 $sys_rate $prod_rate $cons_rate $avg_latency $min_latency $max_latency
+  echo "------------------------------------------------------------------------------------------------"
+}
+
+trap cleanup EXIT
+rm -rf *.out #cleanup old files.
+
+echo "Test report on " `date +%F`
+echo "================================================================================================"
+echo "|Test           |System throuput|Producer rate|Consumer Rate|Avg Latency|Min Latency|Max Latency|"
+echo "------------------------------------------------------------------------------------------------"
+
+# The message counts and warmup counts are set to very low values for quick testing of the script.
+# For a real performance run I recommend setting warmup count to 10k and message count in excess of 100k
+# However for transactions, sync_publish and especially small durable transactions (which is quite slow) I recommend
+# setting very low values to start with and experiment while increasing them slowly.
+
+# Test 1 Trans Queue
+run_testcase "Trans_Queue" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 2 Dura Queue
+run_testcase "Dura_Queue" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 3 Dura Queue Sync
+run_testcase "Dura_Queue_Sync" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
+
+# Test 4 Dura Queue Sync Publish and Ack
+run_testcase "Dura_SyncPubAck" "-Daddress=$DURA_QUEUE -Ddurable=true -Dsync_ack=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
+
+# Test 5 Topic
+run_testcase "Topic" "-Daddress=$TOPIC" "-Daddress=$TOPIC -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 6 Durable Topic
+run_testcase "Dura_Topic" "-Daddress=$DURA_TOPIC -Ddurable=true" "-Daddress=$DURA_TOPIC -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 7 Fanout
+run_testcase "Fanout" "-Daddress=amq.fanout" "-Daddress=amq.fanout -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 8 Small TX
+run_testcase "Small_Txs_2" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=1" \
+ "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=1"
+
+# Test 9 Large TX
+run_testcase "Large_Txs_1000" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=10" \
+ "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=10"
+
+# Test 10 256 MSG
+run_testcase "Msg_256b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=256 -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 11 512 MSG
+run_testcase "Msg_512b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=512 -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 12 2048 MSG
+run_testcase "Msg_2048b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=2048 -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 13 Random size MSG
+run_testcase "Random_Msg_Size" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 14 Random size MSG Durable
+run_testcase "Rand_Msg_Dura" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 15 64K MSG
+run_testcase "Msg_64K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 16 Durable 64K MSG
+run_testcase "Msg_Durable_64K" "-Daddress=$DURA_QUEUE -Ddurable=true -Damqj.tcpNoDelay=true" \
+ "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 17 500K MSG
+run_testcase "Msg_500K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Dwarmup_count=1 -Dmsg_count=10"
+
+# Test 18 Durable 500K MSG
+run_testcase "Msg_Dura_500K" "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Ddurable=true" \
+ "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"