diff options
Diffstat (limited to 'doc/source/admin/drivers/irmc.rst')
| -rw-r--r-- | doc/source/admin/drivers/irmc.rst | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/doc/source/admin/drivers/irmc.rst b/doc/source/admin/drivers/irmc.rst index b256f56ea..cef2f6a50 100644 --- a/doc/source/admin/drivers/irmc.rst +++ b/doc/source/admin/drivers/irmc.rst @@ -124,6 +124,29 @@ Configuration via ``driver_info`` - ``driver_info/irmc_password`` property to be ``password`` for irmc_username. + .. note:: + Fujitsu server equipped with iRMC S6 2.00 or later version of firmware + disables IPMI over LAN by default. However user may be able to enable IPMI + via BMC settings. + To handle this change, ``irmc`` hardware type first tries IPMI and, + if IPMI operation fails, ``irmc`` hardware type uses Redfish API of Fujitsu + server to provide Ironic functionalities. + So if user deploys Fujitsu server with iRMC S6 2.00 or later, user needs + to set Redfish related parameters in ``driver_info``. + + - ``driver_info/redifsh_address`` property to be ``IP address`` or + ``hostname`` of the iRMC. You can prefix it with protocol (e.g. + ``https://``). If you don't provide protocol, Ironic assumes HTTPS + (i.e. add ``https://`` prefix). + iRMC with S6 2.00 or later only support HTTPS connection to Redfish API. + - ``driver_info/redfish_username`` to be user name of iRMC with administrative + privileges + - ``driver_info/redfish_password`` to be password of ``redfish_username`` + - ``driver_info/redfish_verify_ca`` accepts values those accepted in + ``driver_info/irmc_verify_ca`` + - ``driver_info/redfish_auth_type`` to be one of ``basic``, ``session`` or + ``auto`` + * If ``port`` in ``[irmc]`` section of ``/etc/ironic/ironic.conf`` or ``driver_info/irmc_port`` is set to 443, ``driver_info/irmc_verify_ca`` will take effect: |