diff options
Diffstat (limited to 'src/t20/nvboot_bct_t20.h')
| -rw-r--r-- | src/t20/nvboot_bct_t20.h | 66 |
1 files changed, 33 insertions, 33 deletions
diff --git a/src/t20/nvboot_bct_t20.h b/src/t20/nvboot_bct_t20.h index 8585cdb..8625a93 100644 --- a/src/t20/nvboot_bct_t20.h +++ b/src/t20/nvboot_bct_t20.h @@ -97,7 +97,7 @@ enum {NVBOOT_CMAC_AES_HASH_LENGTH = 4}; * Defines the storage for a hash value (128 bits). */ typedef struct nvboot_hash_rec { - u_int32_t hash[NVBOOT_CMAC_AES_HASH_LENGTH]; + uint32_t hash[NVBOOT_CMAC_AES_HASH_LENGTH]; } nvboot_hash; /* Defines the params that can be configured for NAND devices. */ @@ -107,19 +107,19 @@ typedef struct nvboot_nand_params_rec { * If it is set to 18, then clock source to Nand controller is * 432 / 18 = 24MHz. */ - u_int8_t clock_divider; + uint8_t clock_divider; /* Specifies the value to be programmed to Nand Timing Register 1 */ - u_int32_t nand_timing; + uint32_t nand_timing; /* Specifies the value to be programmed to Nand Timing Register 2 */ - u_int32_t nand_timing2; + uint32_t nand_timing2; /* Specifies the block size in log2 bytes */ - u_int8_t block_size_log2; + uint8_t block_size_log2; /* Specifies the page size in log2 bytes */ - u_int8_t page_size_log2; + uint8_t page_size_log2; } nvboot_nand_params; /* Defines various data widths supported. */ @@ -152,7 +152,7 @@ typedef struct nvboot_sdmmc_params_rec { * which is PLLP running at 432MHz. If it is set to 18, then the SDMMC * controller runs at 432/18 = 24MHz. */ - u_int8_t clock_divider; + uint8_t clock_divider; /* Specifies the data bus width. Supported data widths are 4/8 bits. */ nvboot_sdmmc_data_width data_width; @@ -163,7 +163,7 @@ typedef struct nvboot_sdmmc_params_rec { * supported within the power class range (0 to Max) if the selected * data width cannot be used at the chosen clock frequency. */ - u_int8_t max_power_class_supported; + uint8_t max_power_class_supported; } nvboot_sdmmc_params; typedef enum { @@ -203,14 +203,14 @@ typedef struct nvboot_spiflash_params_rec { * FAST_READ at 40MHz: 11 * FAST_READ at 50MHz: 9 */ - u_int8_t clock_divider; + uint8_t clock_divider; /** * Specifies the type of command for read operations. * NV_FALSE specifies a NORMAL_READ Command * NV_TRUE specifies a FAST_READ Command */ - u_int8_t read_command_type_fast; + uint8_t read_command_type_fast; } nvboot_spiflash_params; /** @@ -257,13 +257,13 @@ typedef enum { * the device. */ typedef struct nv_bootloader_info_rec { - u_int32_t version; - u_int32_t start_blk; - u_int32_t start_page; - u_int32_t length; - u_int32_t load_addr; - u_int32_t entry_point; - u_int32_t attribute; + uint32_t version; + uint32_t start_blk; + uint32_t start_page; + uint32_t length; + uint32_t load_addr; + uint32_t entry_point; + uint32_t attribute; nvboot_hash crypto_hash; } nv_bootloader_info; @@ -271,10 +271,10 @@ typedef struct nv_bootloader_info_rec { * Defines the bad block table structure stored in the BCT. */ typedef struct nvboot_badblock_table_rec { - u_int32_t entries_used; - u_int8_t virtual_blk_size_log2; - u_int8_t block_size_log2; - u_int8_t bad_blks[NVBOOT_BAD_BLOCK_TABLE_SIZE / 8]; + uint32_t entries_used; + uint8_t virtual_blk_size_log2; + uint8_t block_size_log2; + uint8_t bad_blks[NVBOOT_BAD_BLOCK_TABLE_SIZE / 8]; } nvboot_badblock_table; /** @@ -288,19 +288,19 @@ typedef struct nvboot_badblock_table_rec { typedef struct nvboot_config_table_rec { nvboot_hash crypto_hash; nvboot_hash random_aes_blk; - u_int32_t boot_data_version; - u_int32_t block_size_log2; - u_int32_t page_size_log2; - u_int32_t partition_size; - u_int32_t num_param_sets; + uint32_t boot_data_version; + uint32_t block_size_log2; + uint32_t page_size_log2; + uint32_t partition_size; + uint32_t num_param_sets; nvboot_dev_type dev_type[NVBOOT_BCT_MAX_PARAM_SETS]; nvboot_dev_params dev_params[NVBOOT_BCT_MAX_PARAM_SETS]; - u_int32_t num_sdram_sets; + uint32_t num_sdram_sets; nvboot_sdram_params sdram_params[NVBOOT_BCT_MAX_SDRAM_SETS]; nvboot_badblock_table badblock_table; - u_int32_t bootloader_used; + uint32_t bootloader_used; nv_bootloader_info bootloader[NVBOOT_MAX_BOOTLOADERS]; - u_int8_t customer_data[NVBOOT_BCT_CUSTOMER_DATA_SIZE]; + uint8_t customer_data[NVBOOT_BCT_CUSTOMER_DATA_SIZE]; /* * ODMDATA is stored in the BCT in IRAM by the BootROM. @@ -308,9 +308,9 @@ typedef struct nvboot_config_table_rec { * on T20 and T30 BCTs, which are locked down. If this changes * in new chips, we can revisit this algorithm. */ - u_int32_t odm_data; - u_int32_t reserved1; - u_int8_t enable_fail_back; - u_int8_t reserved[NVBOOT_BCT_RESERVED_SIZE]; + uint32_t odm_data; + uint32_t reserved1; + uint8_t enable_fail_back; + uint8_t reserved[NVBOOT_BCT_RESERVED_SIZE]; } nvboot_config_table; #endif /* #ifndef INCLUDED_NVBOOT_BCT_T20_H */ |