diff options
Diffstat (limited to 'security/nss/cmd/lib/NSPRerrs.h')
-rw-r--r-- | security/nss/cmd/lib/NSPRerrs.h | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/security/nss/cmd/lib/NSPRerrs.h b/security/nss/cmd/lib/NSPRerrs.h deleted file mode 100644 index 5e2cd793e..000000000 --- a/security/nss/cmd/lib/NSPRerrs.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * The contents of this file are subject to the Mozilla Public - * License Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. You may obtain a copy of - * the License at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS - * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - * implied. See the License for the specific language governing - * rights and limitations under the License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is Netscape - * Communications Corporation. Portions created by Netscape are - * Copyright (C) 1994-2000 Netscape Communications Corporation. All - * Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License Version 2 or later (the - * "GPL"), in which case the provisions of the GPL are applicable - * instead of those above. If you wish to allow use of your - * version of this file only under the terms of the GPL and not to - * allow others to use your version of this file under the MPL, - * indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by - * the GPL. If you do not delete the provisions above, a recipient - * may use your version of this file under either the MPL or the - * GPL. - */ -/* General NSPR 2.0 errors */ -/* Caller must #include "prerror.h" */ - -ER2( PR_OUT_OF_MEMORY_ERROR, "Memory allocation attempt failed." ) -ER2( PR_BAD_DESCRIPTOR_ERROR, "Invalid file descriptor." ) -ER2( PR_WOULD_BLOCK_ERROR, "The operation would have blocked." ) -ER2( PR_ACCESS_FAULT_ERROR, "Invalid memory address argument." ) -ER2( PR_INVALID_METHOD_ERROR, "Invalid function for file type." ) -ER2( PR_ILLEGAL_ACCESS_ERROR, "Invalid memory address argument." ) -ER2( PR_UNKNOWN_ERROR, "Some unknown error has occurred." ) -ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." ) -ER2( PR_NOT_IMPLEMENTED_ERROR, "function not implemented." ) -ER2( PR_IO_ERROR, "I/O function error." ) -ER2( PR_IO_TIMEOUT_ERROR, "I/O operation timed out." ) -ER2( PR_IO_PENDING_ERROR, "I/O operation on busy file descriptor." ) -ER2( PR_DIRECTORY_OPEN_ERROR, "The directory could not be opened." ) -ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." ) -ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." ) -ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." ) -ER2( PR_IS_CONNECTED_ERROR, "Already connected." ) -ER2( PR_BAD_ADDRESS_ERROR, "Network address is invalid." ) -ER2( PR_ADDRESS_IN_USE_ERROR, "Local Network address is in use." ) -ER2( PR_CONNECT_REFUSED_ERROR, "Connection refused by peer." ) -ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." ) -ER2( PR_CONNECT_TIMEOUT_ERROR, "Connection attempt timed out." ) -ER2( PR_NOT_CONNECTED_ERROR, "Network file descriptor is not connected." ) -ER2( PR_LOAD_LIBRARY_ERROR, "Failure to load dynamic library." ) -ER2( PR_UNLOAD_LIBRARY_ERROR, "Failure to unload dynamic library." ) -ER2( PR_FIND_SYMBOL_ERROR, -"Symbol not found in any of the loaded dynamic libraries." ) -ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." ) -ER2( PR_DIRECTORY_LOOKUP_ERROR, -"A directory lookup on a network address has failed." ) -ER2( PR_TPD_RANGE_ERROR, -"Attempt to access a TPD key that is out of range." ) -ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." ) -ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." ) -ER2( PR_NOT_SOCKET_ERROR, -"Network operation attempted on non-network file descriptor." ) -ER2( PR_NOT_TCP_SOCKET_ERROR, -"TCP-specific function attempted on a non-TCP file descriptor." ) -ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." ) -ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." ) -ER2( PR_OPERATION_NOT_SUPPORTED_ERROR, -"The requested operation is not supported by the platform." ) -ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR, -"The host operating system does not support the protocol requested." ) -ER2( PR_REMOTE_FILE_ERROR, "Access to the remote file has been severed." ) -ER2( PR_BUFFER_OVERFLOW_ERROR, -"The value requested is too large to be stored in the data buffer provided." ) -ER2( PR_CONNECT_RESET_ERROR, "TCP connection reset by peer." ) -ER2( PR_RANGE_ERROR, "Unused." ) -ER2( PR_DEADLOCK_ERROR, "The operation would have deadlocked." ) -ER2( PR_FILE_IS_LOCKED_ERROR, "The file is already locked." ) -ER2( PR_FILE_TOO_BIG_ERROR, -"Write would result in file larger than the system allows." ) -ER2( PR_NO_DEVICE_SPACE_ERROR, "The device for storing the file is full." ) -ER2( PR_PIPE_ERROR, "Unused." ) -ER2( PR_NO_SEEK_DEVICE_ERROR, "Unused." ) -ER2( PR_IS_DIRECTORY_ERROR, -"Cannot perform a normal file operation on a directory." ) -ER2( PR_LOOP_ERROR, "Symbolic link loop." ) -ER2( PR_NAME_TOO_LONG_ERROR, "File name is too long." ) -ER2( PR_FILE_NOT_FOUND_ERROR, "File not found." ) -ER2( PR_NOT_DIRECTORY_ERROR, -"Cannot perform directory operation on a normal file." ) -ER2( PR_READ_ONLY_FILESYSTEM_ERROR, -"Cannot write to a read-only file system." ) -ER2( PR_DIRECTORY_NOT_EMPTY_ERROR, -"Cannot delete a directory that is not empty." ) -ER2( PR_FILESYSTEM_MOUNTED_ERROR, -"Cannot delete or rename a file object while the file system is busy." ) -ER2( PR_NOT_SAME_DEVICE_ERROR, -"Cannot rename a file to a file system on another device." ) -ER2( PR_DIRECTORY_CORRUPTED_ERROR, -"The directory object in the file system is corrupted." ) -ER2( PR_FILE_EXISTS_ERROR, -"Cannot create or rename a filename that already exists." ) -ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR, -"Directory is full. No additional filenames may be added." ) -ER2( PR_INVALID_DEVICE_STATE_ERROR, -"The required device was in an invalid state." ) -ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." ) -ER2( PR_NO_MORE_FILES_ERROR, "No more entries in the directory." ) -ER2( PR_END_OF_FILE_ERROR, "Encountered end of file." ) -ER2( PR_FILE_SEEK_ERROR, "Seek error." ) -ER2( PR_FILE_IS_BUSY_ERROR, "The file is busy." ) -ER2( PR_IN_PROGRESS_ERROR, -"Operation is still in progress (probably a non-blocking connect)." ) -ER2( PR_ALREADY_INITIATED_ERROR, -"Operation has already been initiated (probably a non-blocking connect)." ) - -#ifdef PR_GROUP_EMPTY_ERROR -ER2( PR_GROUP_EMPTY_ERROR, "The wait group is empty." ) -#endif - -#ifdef PR_INVALID_STATE_ERROR -ER2( PR_INVALID_STATE_ERROR, "Object state improper for request." ) -#endif - -#ifdef PR_NETWORK_DOWN_ERROR -ER2( PR_NETWORK_DOWN_ERROR, "Network is down." ) -#endif - -#ifdef PR_SOCKET_SHUTDOWN_ERROR -ER2( PR_SOCKET_SHUTDOWN_ERROR, "The socket was previously shut down." ) -#endif - -#ifdef PR_CONNECT_ABORTED_ERROR -ER2( PR_CONNECT_ABORTED_ERROR, "TCP Connection aborted." ) -#endif - -#ifdef PR_HOST_UNREACHABLE_ERROR -ER2( PR_HOST_UNREACHABLE_ERROR, "Host is unreachable." ) -#endif - -/* always last */ -ER2( PR_MAX_ERROR, "Placeholder for the end of the list" ) |