diff options
Diffstat (limited to 'pcre/RunTest')
| -rwxr-xr-x | pcre/RunTest | 1014 |
1 files changed, 0 insertions, 1014 deletions
diff --git a/pcre/RunTest b/pcre/RunTest deleted file mode 100755 index 357a739b75f..00000000000 --- a/pcre/RunTest +++ /dev/null @@ -1,1014 +0,0 @@ -#! /bin/sh - -############################################################################### -# Run the PCRE tests using the pcretest program. The appropriate tests are -# selected, depending on which build-time options were used. -# -# All tests are now run both with and without -s, to ensure that everything is -# tested with and without studying. However, there are some tests that produce -# different output after studying, typically when we are tracing the actual -# matching process (for example, using auto-callouts). In these few cases, the -# tests are duplicated in the files, one with /S to force studying always, and -# one with /SS to force *not* studying always. The use of -s doesn't then make -# any difference to their output. There is also one test which compiles invalid -# UTF-8 with the UTF-8 check turned off; for this, studying must also be -# disabled with /SS. -# -# When JIT support is available, all appropriate tests are also run with -s+ to -# test (again, almost) everything with studying and the JIT option, unless -# "nojit" is given on the command line. There are also two tests for -# JIT-specific features, one to be run when JIT support is available (unless -# "nojit" is specified), and one when it is not. -# -# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also -# possible to select which to test by giving "-8", "-16" or "-32" on the -# command line. -# -# As well as "nojit", "-8", "-16", and "-32", arguments for this script are -# individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the -# end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10" -# runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests -# except test 10. Whatever order the arguments are in, the tests are always run -# in numerical order. -# -# The special argument "3S" runs test 3, stopping if it fails. Test 3 is the -# locale test, and failure usually means there's an issue with the locale -# rather than a bug in PCRE, so normally subsequent tests are run. "3S" is -# useful when you want to debug or update the test. -# -# Inappropriate tests are automatically skipped (with a comment to say so): for -# example, if JIT support is not compiled, test 12 is skipped, whereas if JIT -# support is compiled, test 13 is skipped. -# -# Other arguments can be one of the words "valgrind", "valgrind-log", or "sim" -# followed by an argument to run cross-compiled executables under a simulator, -# for example: -# -# RunTest 3 sim "qemu-arm -s 8388608" -# -# There are two special cases where only one argument is allowed: -# -# If the first and only argument is "ebcdic", the script runs the special -# EBCDIC test that can be useful for checking certain EBCDIC features, even -# when run in an ASCII environment. -# -# If the script is obeyed as "RunTest list", a list of available tests is -# output, but none of them are run. -############################################################################### - -# Define test titles in variables so that they can be output as a list. Some -# of them are modified (e.g. with -8 or -16) when used in the actual tests. - -title1="Test 1: Main functionality (Compatible with Perl >= 5.10)" -title2="Test 2: API, errors, internals, and non-Perl stuff" -title3="Test 3: Locale-specific features" -title4A="Test 4: UTF" -title4B=" support (Compatible with Perl >= 5.10)" -title5="Test 5: API, internals, and non-Perl stuff for UTF" -title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)" -title7="Test 7: API, internals, and non-Perl stuff for Unicode property support" -title8="Test 8: DFA matching main functionality" -title9="Test 9: DFA matching with UTF" -title10="Test 10: DFA matching with Unicode properties" -title11="Test 11: Internal offsets and code size tests" -title12="Test 12: JIT-specific features (when JIT is available)" -title13="Test 13: JIT-specific features (when JIT is not available)" -title14="Test 14: Specials for the basic 8-bit library" -title15="Test 15: Specials for the 8-bit library with UTF-8 support" -title16="Test 16: Specials for the 8-bit library with Unicode propery support" -title17="Test 17: Specials for the basic 16/32-bit library" -title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support" -title19="Test 19: Specials for the 16/32-bit library with Unicode property support" -title20="Test 20: DFA specials for the basic 16/32-bit library" -title21="Test 21: Reloads for the basic 16/32-bit library" -title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support" -title23="Test 23: Specials for the 16-bit library" -title24="Test 24: Specials for the 16-bit library with UTF-16 support" -title25="Test 25: Specials for the 32-bit library" -title26="Test 26: Specials for the 32-bit library with UTF-32 support" - -maxtest=26 - -if [ $# -eq 1 -a "$1" = "list" ]; then - echo $title1 - echo $title2 "(not UTF)" - echo $title3 - echo $title4A $title4B - echo $title5 support - echo $title6 - echo $title7 - echo $title8 - echo $title9 - echo $title10 - echo $title11 - echo $title12 - echo $title13 - echo $title14 - echo $title15 - echo $title16 - echo $title17 - echo $title18 - echo $title19 - echo $title20 - echo $title21 - echo $title22 - echo $title23 - echo $title24 - echo $title25 - echo $title26 - exit 0 -fi - -# Set up a suitable "diff" command for comparison. Some systems -# have a diff that lacks a -u option. Try to deal with this. - -cf="diff" -diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u" - -# Find the test data - -if [ -n "$srcdir" -a -d "$srcdir" ] ; then - testdata="$srcdir/testdata" -elif [ -d "./testdata" ] ; then - testdata=./testdata -elif [ -d "../testdata" ] ; then - testdata=../testdata -else - echo "Cannot find the testdata directory" - exit 1 -fi - - -# ------ Special EBCDIC Test ------- - -if [ $# -eq 1 -a "$1" = "ebcdic" ]; then - ./pcretest -C ebcdic >/dev/null - ebcdic=$? - if [ $ebcdic -ne 1 ] ; then - echo "Cannot run EBCDIC tests: EBCDIC support not compiled" - exit 1 - fi - - for opt in "" "-s" "-dfa" "-s -dfa"; do - ./pcretest -q $opt $testdata/testinputEBC >testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutputEBC testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-dfa" ] ; then echo " OK using DFA" - elif [ "$opt" = "-s -dfa" ] ; then echo " OK using DFA with study" - else echo " OK" - fi - done - -exit 0 -fi - - -# ------ Normal Tests ------ - -# Default values - -arg8= -arg16= -arg32= -nojit= -sim= -skip= -valgrind= -vjs= - -# This is in case the caller has set aliases (as I do - PH) -unset cp ls mv rm - -# Process options and select which tests to run; for those that are explicitly -# requested, check that the necessary optional facilities are available. - -do1=no -do2=no -do3=no -do4=no -do5=no -do6=no -do7=no -do8=no -do9=no -do10=no -do11=no -do12=no -do13=no -do14=no -do15=no -do16=no -do17=no -do18=no -do19=no -do20=no -do21=no -do22=no -do23=no -do24=no -do25=no -do26=no - -while [ $# -gt 0 ] ; do - case $1 in - 1) do1=yes;; - 2) do2=yes;; - 3) do3=yes;; - 4) do4=yes;; - 5) do5=yes;; - 6) do6=yes;; - 7) do7=yes;; - 8) do8=yes;; - 9) do9=yes;; - 10) do10=yes;; - 11) do11=yes;; - 12) do12=yes;; - 13) do13=yes;; - 14) do14=yes;; - 15) do15=yes;; - 16) do16=yes;; - 17) do17=yes;; - 18) do18=yes;; - 19) do19=yes;; - 20) do20=yes;; - 21) do21=yes;; - 22) do22=yes;; - 23) do23=yes;; - 24) do24=yes;; - 25) do25=yes;; - 26) do26=yes;; - -8) arg8=yes;; - -16) arg16=yes;; - -32) arg32=yes;; - nojit) nojit=yes;; - sim) shift; sim=$1;; - valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";; - valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";; - ~*) - if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then - skip="$skip `expr "$1" : '~\([0-9]*\)*$'`" - else - echo "Unknown option or test selector '$1'"; exit 1 - fi - ;; - *-*) - if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then - tf=`expr "$1" : '\([0-9]*\)'` - tt=`expr "$1" : '.*-\([0-9]*\)'` - if [ "$tt" = "" ] ; then tt=$maxtest; fi - if expr \( "$tf" "<" 1 \) \| \( "$tt" ">" "$maxtest" \) >/dev/null; then - echo "Invalid test range '$1'"; exit 1 - fi - while expr "$tf" "<=" "$tt" >/dev/null; do - eval do${tf}=yes - tf=`expr $tf + 1` - done - else - echo "Invalid test range '$1'"; exit 1 - fi - ;; - *) echo "Unknown option or test selector '$1'"; exit 1;; - esac - shift -done - -# Find which optional facilities are available. - -$sim ./pcretest -C linksize >/dev/null -link_size=$? -if [ $link_size -lt 2 ] ; then - echo "Failed to find internal link size" - exit 1 -fi -if [ $link_size -gt 4 ] ; then - echo "Failed to find internal link size" - exit 1 -fi - -# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only -# one need be. - -$sim ./pcretest -C pcre8 >/dev/null -support8=$? -$sim ./pcretest -C pcre16 >/dev/null -support16=$? -$sim ./pcretest -C pcre32 >/dev/null -support32=$? - -# Initialize all bitsizes skipped - -test8=skip -test16=skip -test32=skip - -# If no bitsize arguments, select all that are available - -if [ "$arg8$arg16$arg32" = "" ] ; then - if [ $support8 -ne 0 ] ; then - test8= - fi - if [ $support16 -ne 0 ] ; then - test16=-16 - fi - if [ $support32 -ne 0 ] ; then - test32=-32 - fi - -# Select requested bit sizes - -else - if [ "$arg8" = yes ] ; then - if [ $support8 -eq 0 ] ; then - echo "Cannot run 8-bit library tests: 8-bit library not compiled" - exit 1 - fi - test8= - fi - if [ "$arg16" = yes ] ; then - if [ $support16 -eq 0 ] ; then - echo "Cannot run 16-bit library tests: 16-bit library not compiled" - exit 1 - fi - test16=-16 - fi - if [ "$arg32" = yes ] ; then - if [ $support32 -eq 0 ] ; then - echo "Cannot run 32-bit library tests: 32-bit library not compiled" - exit 1 - fi - test32=-32 - fi -fi - -# UTF support always applies to all bit sizes if both are supported; we can't -# have UTF-8 support without UTF-16 support (for example). - -$sim ./pcretest -C utf >/dev/null -utf=$? - -$sim ./pcretest -C ucp >/dev/null -ucp=$? - -jitopt= -$sim ./pcretest -C jit >/dev/null -jit=$? -if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then - jitopt=-s+ - if [ "$valgrind" != "" ] ; then - vjs="--suppressions=$testdata/valgrind-jit.supp" - fi -fi - -# If no specific tests were requested, select all. Those that are not -# relevant will be automatically skipped. - -if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ - $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ - $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ - $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \ - $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \ - $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \ - $do25 = no -a $do26 = no ] ; then - do1=yes - do2=yes - do3=yes - do4=yes - do5=yes - do6=yes - do7=yes - do8=yes - do9=yes - do10=yes - do11=yes - do12=yes - do13=yes - do14=yes - do15=yes - do16=yes - do17=yes - do18=yes - do19=yes - do20=yes - do21=yes - do22=yes - do23=yes - do24=yes - do25=yes - do26=yes -fi - -# Handle any explicit skips at this stage, so that an argument list may consist -# only of explicit skips. - -for i in $skip; do eval do$i=no; done - -# Show which release and which test data - -echo "" -echo PCRE C library tests using test data from $testdata -$sim ./pcretest /dev/null - -for bmode in "$test8" "$test16" "$test32"; do - case "$bmode" in - skip) continue;; - -16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi - bits=16; echo "---- Testing 16-bit library ----"; echo "";; - -32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi - bits=32; echo "---- Testing 32-bit library ----"; echo "";; - *) bits=8; echo "---- Testing 8-bit library ----"; echo "";; - esac - -# Primary test, compatible with JIT and all versions of Perl >= 5.8 - -if [ $do1 = yes ] ; then - echo $title1 - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput1 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput1 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done -fi - -# PCRE tests that are not JIT or Perl-compatible: API, errors, internals - -if [ $do2 = yes ] ; then - echo $title2 "(not UTF-$bits)" - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput2 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput2 testtry - if [ $? != 0 ] ; then exit 1; fi - else - echo " " - echo "** Test 2 requires a lot of stack. If it has crashed with a" - echo "** segmentation fault, it may be that you do not have enough" - echo "** stack available by default. Please see the 'pcrestack' man" - echo "** page for a discussion of PCRE's stack usage." - echo " " - exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done -fi - -# Locale-specific tests, provided that either the "fr_FR" or the "french" -# locale is available. The former is the Unix-like standard; the latter is -# for Windows. Another possibility is "fr". Unfortunately, different versions -# of the French locale give different outputs for some items. This test passes -# if the output matches any one of the alternative output files. - -if [ $do3 = yes ] ; then - locale -a | grep '^fr_FR$' >/dev/null - if [ $? -eq 0 ] ; then - locale=fr_FR - infile=$testdata/testinput3 - outfile=$testdata/testoutput3 - outfile2=$testdata/testoutput3A - outfile3=$testdata/testoutput3B - else - infile=test3input - outfile=test3output - outfile2=test3outputA - outfile3=test3outputB - locale -a | grep '^french$' >/dev/null - if [ $? -eq 0 ] ; then - locale=french - sed 's/fr_FR/french/' $testdata/testinput3 >test3input - sed 's/fr_FR/french/' $testdata/testoutput3 >test3output - sed 's/fr_FR/french/' $testdata/testoutput3A >test3outputA - sed 's/fr_FR/french/' $testdata/testoutput3B >test3outputB - else - locale -a | grep '^fr$' >/dev/null - if [ $? -eq 0 ] ; then - locale=fr - sed 's/fr_FR/fr/' $testdata/intestinput3 >test3input - sed 's/fr_FR/fr/' $testdata/intestoutput3 >test3output - sed 's/fr_FR/fr/' $testdata/intestoutput3A >test3outputA - sed 's/fr_FR/fr/' $testdata/intestoutput3B >test3outputB - else - locale= - fi - fi - fi - - if [ "$locale" != "" ] ; then - echo $title3 "(using '$locale' locale)" - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $infile testtry - if [ $? = 0 ] ; then - if $cf $outfile testtry >teststdout || \ - $cf $outfile2 testtry >teststdout || \ - $cf $outfile3 testtry >teststdout - then - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - else - echo "** Locale test did not run successfully. The output did not match" - echo " $outfile, $outfile2 or $outfile3." - echo " This may mean that there is a problem with the locale settings rather" - echo " than a bug in PCRE." - exit 1 - fi - else exit 1 - fi - done - else - echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or" - echo "'french' locales exist, or the \"locale\" command is not available" - echo "to check for them." - echo " " - fi -fi - -# Additional tests for UTF support - -if [ $do4 = yes ] ; then - echo ${title4A}-${bits}${title4B} - if [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput4 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput4 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -if [ $do5 = yes ] ; then - echo ${title5}-${bits} support - if [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput5 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput5 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -if [ $do6 = yes ] ; then - echo $title6 - if [ $utf -eq 0 -o $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput6 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput6 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Test non-Perl-compatible Unicode property support - -if [ $do7 = yes ] ; then - echo $title7 - if [ $utf -eq 0 -o $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput7 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput7 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for DFA matching support - -if [ $do8 = yes ] ; then - echo $title8 - for opt in "" "-s"; do - $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput8 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi - done -fi - -if [ $do9 = yes ] ; then - echo ${title9}-${bits} - if [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - for opt in "" "-s"; do - $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput9 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi - done - fi -fi - -if [ $do10 = yes ] ; then - echo $title10 - if [ $utf -eq 0 -o $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s"; do - $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput10 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi - done - fi -fi - -# Test of internal offsets and code sizes. This test is run only when there -# is Unicode property support and the link size is 2. The actual tests are -# mostly the same as in some of the above, but in this test we inspect some -# offsets and sizes that require a known link size. This is a doublecheck for -# the maintainer, just in case something changes unexpectely. The output from -# this test is not the same in 8-bit and 16-bit modes. - -if [ $do11 = yes ] ; then - echo $title11 - if [ $link_size -ne 2 ] ; then - echo " Skipped because link size is not 2" - elif [ $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s"; do - $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput11-$bits testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi - done - fi -fi - -# Test JIT-specific features when JIT is available - -if [ $do12 = yes ] ; then - echo $title12 - if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then - echo " Skipped because JIT is not available or not usable" - else - $sim $valgrind $vjs ./pcretest -q $bmode $testdata/testinput12 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput12 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -# Test JIT-specific features when JIT is not available - -if [ $do13 = yes ] ; then - echo $title13 - if [ $jit -ne 0 ] ; then - echo " Skipped because JIT is available" - else - $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput13 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -# Tests for 8-bit-specific features - -if [ "$do14" = yes ] ; then - echo $title14 - if [ "$bits" = "16" -o "$bits" = "32" ] ; then - echo " Skipped when running 16/32-bit tests" - else - cp -f $testdata/saved16 testsaved16 - cp -f $testdata/saved32 testsaved32 - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput14 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput14 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 8-bit-specific features (needs UTF-8 support) - -if [ "$do15" = yes ] ; then - echo $title15 - if [ "$bits" = "16" -o "$bits" = "32" ] ; then - echo " Skipped when running 16/32-bit tests" - elif [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput15 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput15 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 8-bit-specific features (Unicode property support) - -if [ $do16 = yes ] ; then - echo $title16 - if [ "$bits" = "16" -o "$bits" = "32" ] ; then - echo " Skipped when running 16/32-bit tests" - elif [ $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput16 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput16 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 16/32-bit-specific features - -if [ $do17 = yes ] ; then - echo $title17 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput17 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput17 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 16/32-bit-specific features (UTF-16/32 support) - -if [ $do18 = yes ] ; then - echo $title18 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - elif [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput18 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput18-$bits testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 16/32-bit-specific features (Unicode property support) - -if [ $do19 = yes ] ; then - echo $title19 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - elif [ $ucp -eq 0 ] ; then - echo " Skipped because Unicode property support is not available" - else - for opt in "" "-s" $jitopt; do - $sim $valgrind ${opt:+$vjs} ./pcretest -q $bmode $opt $testdata/testinput19 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput19 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" - else echo " OK" - fi - done - fi -fi - -# Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode - -if [ $do20 = yes ] ; then - echo $title20 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - else - for opt in "" "-s"; do - $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput20 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - if [ "$opt" = "-s" ] ; then echo " OK with study" - else echo " OK" - fi - done - fi -fi - -# Tests for reloads with 16/32-bit library - -if [ $do21 = yes ] ; then - echo $title21 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - elif [ $link_size -ne 2 ] ; then - echo " Skipped because link size is not 2" - else - cp -f $testdata/saved8 testsaved8 - cp -f $testdata/saved16LE-1 testsaved16LE-1 - cp -f $testdata/saved16BE-1 testsaved16BE-1 - cp -f $testdata/saved32LE-1 testsaved32LE-1 - cp -f $testdata/saved32BE-1 testsaved32BE-1 - $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput21-$bits testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -# Tests for reloads with 16/32-bit library (UTF-16 support) - -if [ $do22 = yes ] ; then - echo $title22 - if [ "$bits" = "8" ] ; then - echo " Skipped when running 8-bit tests" - elif [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - elif [ $link_size -ne 2 ] ; then - echo " Skipped because link size is not 2" - else - cp -f $testdata/saved16LE-2 testsaved16LE-2 - cp -f $testdata/saved16BE-2 testsaved16BE-2 - cp -f $testdata/saved32LE-2 testsaved32LE-2 - cp -f $testdata/saved32BE-2 testsaved32BE-2 - $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput22-$bits testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -if [ $do23 = yes ] ; then - echo $title23 - if [ "$bits" = "8" -o "$bits" = "32" ] ; then - echo " Skipped when running 8/32-bit tests" - else - $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput23 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -if [ $do24 = yes ] ; then - echo $title24 - if [ "$bits" = "8" -o "$bits" = "32" ] ; then - echo " Skipped when running 8/32-bit tests" - elif [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput24 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -if [ $do25 = yes ] ; then - echo $title25 - if [ "$bits" = "8" -o "$bits" = "16" ] ; then - echo " Skipped when running 8/16-bit tests" - else - $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput25 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -if [ $do26 = yes ] ; then - echo $title26 - if [ "$bits" = "8" -o "$bits" = "16" ] ; then - echo " Skipped when running 8/16-bit tests" - elif [ $utf -eq 0 ] ; then - echo " Skipped because UTF-$bits support is not available" - else - $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry - if [ $? = 0 ] ; then - $cf $testdata/testoutput26 testtry - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo " OK" - fi -fi - -# End of loop for 8/16/32-bit tests -done - -# Clean up local working files -rm -f test3input test3output test3outputA testNinput testsaved* teststderr teststdout testtry - -# End |