BUG#39934: Slave stops for engine that only support row-based logging

General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.

Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
 - binlog_format=STATEMENT for a row injection
 - binlog_format=STATEMENT for an unsafe statement
 - binlog_format=STATEMENT for an engine only supporting row logging
 - binlog_format=ROW for an engine only supporting statement logging
 - statement is unsafe and engine does not support row logging
 - row injection in a table that does not support statement logging
 - statement modifies one table that does not support row logging and
   one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()

Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().

Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.

Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.


mysql-test/extra/rpl_tests/create_recursive_construct.inc:
  Added auxiliary file used by binlog_unsafe.test to create and
  execute recursive constructs
  (functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
  removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
  Filter out table id from table map events in binlog listing.
  Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
  disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
  Disabled warnings for code that generates warnings
  for some binlog formats. That would otherwise cause
  inconsistencies in the result file.
mysql-test/r/mysqldump.result:
  Views are now unsafe if they contain a LIMIT clause.
  That fixed BUG#45831. Due to BUG#45832, a warning is
  printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
  Unsafe statements in stored procedures did not give a warning if
  binlog_format=statement. This is BUG#45824. Now they do, so this
  result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
  Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
  INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
  That was BUG#45825. Now there is a warning, so result file needs to be
  updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
  Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
  updated result file:
   - error message changed
   - added test for most combinations of unsafe constructs invoked
     from recursive constructs
   - INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
   - INSERT..SELECT..LIMIT now gives a warning from inside recursive
     constructs (because BUG#45785 was fixed)
   - When a recursive construct (e.g., stored proc or function)
     contains more than one statement, at least one of which is
     unsafe, then all statements in the recursive construct give
     warnings. This is a new bug introduced by this changeset.
     It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
  Changed error code for innodb updates with READ COMMITTED or 
  READ UNCOMMITTED transaction isolation level and
  binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
  The error code has changed for statements where more than one
  engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
  Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
  flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
   - Clarified comment.
   - Rewrote first part of test. Now it tests not only unsafe variables
     and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
     INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
     access to log tables in the mysql database.
     Also, in addition to functions, procedures, triggers, and prepared
     statements, it now also tests views; and it constructs recursive
     calls in two levels by combining these recursive constructs.
     Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
   - added tests for all special system variables that should not be unsafe.
   - added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
  updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
  updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
  updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
  updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
  updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
  Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
  rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
  the second half of the old rpl_found_rows.result, with the following
  modifications:
   - minor formatting changes
   - additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
  Moved out code operating in mixed mode from rpl_stm_insert_delayed
  (into rpl_mix_insert_delayed) and got rid of explicit setting of
  binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
  updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
  Moved the second half of rpl_idempotency.test, which only
  executed in row mode, to rpl_row_idempotency.test. This is
  the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
  Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
  Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
  rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
  this file:
   - minor formatting changes
   - warning is now issued for unsafe statements inside procedures
     (since BUG#45824 is fixed)
   - second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
  Moved out code operating in mixed mode from rpl_stm_insert_delayed
  (into rpl_mix_insert_delayed) and got rid of explicit setting of
  binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
  error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
  updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
  Remove explicit set of binlog format (and triplicate test execution)
  and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
  Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
  Removed explicit set of binlog_format and removed duplicate testing.
  Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
  Removed triplicate testing and instead relying on test system.
  Test is only relevant for row format since statement-based replication
  cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
  Removed triplicate testing and instead relying on test system.
  Test is only relevant for row format since statement-based replication
  cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
  Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
  - Moved out row-only tests to a new test file, rpl_row_idempotency.test.
    rpl_idempotency now only contains tests that execute in all
    binlog_formats.
  - While I was here, also removed .opt file to avoid server restarts.
    The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
  Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
  rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
  contains the second half of the original rpl_found_rows.test with the
  follwing changes:
   - initialization
   - removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
   - minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
  Moved out code operating in mixed mode from rpl_stm_insert_delayed
  (into rpl_mix_insert_delayed) and got rid of explicit setting of
  binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
  Test cannot execute in statement mode, since we no longer
  switch to row format when binlog_format=statement.
  Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
  Moved the second half of rpl_idempotency.test, which only
  executed in row mode, to this new file. We now rely on the
  test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
   - Got rid of unnecessary explicit setting of binlog format.
   - extra/rpl_tests/rpl_insert_delayed.test does not need the
     $binlog_format_statement variable any more, so that was
     removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
  The test switches binlog_format internally and master generates both
  row and statement events. Hence, the slave must be able to log in both
  statement and row format. Hence test was changed to only execute in
  mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
  Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
  rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
  this file:
   - minor formatting changes
   - added have_binlog_format_statement and removed SET BINLOG_FORMAT.
   - second half of file is moved to rpl_mix_found_rows.test
   - added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
  Moved out code operating in mixed mode from rpl_stm_insert_delayed
  (into rpl_mix_insert_delayed) and got rid of explicit setting of
  binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
  The test switches binlog_format internally and master generates both
  row and statement events. Hence, the slave must be able to log in both
  statement and row format. Hence test was changed to only execute in
  mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
  Removed explicit set of binlog format. Instead, the test now only
  executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
  Remove explicit set of binlog format (and triplicate test execution)
  and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
  Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
  new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
  updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
  new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
  new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
  New test case to verify all errors and warnings generated by
  decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
  While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
  The test needs slave to be able to switch to row mode, so the
  test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
  Changed error code for innodb updates with READ COMMITTED or 
  READ UNCOMMITTED transaction isolation level and
  binlog_format=statement.
sql/event_db_repository.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
  reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
  thread any more. Instead, the ndb_binlog thread now forces row mode both
  initially and just after calling mysql_parse.  (mysql_parse() is the only
  place where reset_current_stmt_binlog_row_based() may be called from
  the ndb_binlog thread, so these are the only two places that need to
  change.)
sql/ha_partition.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
  Added DBUG_ENTER to some functions, to be able to trace when
  set_stmt_unsafe is called.
sql/log.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
   - Moved logic for changing to row format out of do_apply_event (and into
     decide_logging_format).
   - Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
  Move logic for changing to row format out of do_apply_event (and into
  decide_logging_format).
sql/mysql_priv.h:
  Make decide_logging_format() a member of the THD class, for two reasons:
   - It is natural from an object-oriented perspective.
   - decide_logging_format() needs to access private members of THD
     (specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
  Removed call to set_current_stmt_binlog_row_based().
  From now on, only decide_logging_fromat is allowed to modify
  current_stmt_binlog_row_based. This call is from the ndb_binlog
  thread, mostly executing code in ha_ndbcluster_binlog.cc.
  This call can be safely removed, because:
   - current_stmt_binlog_row_based is initialized for the ndb_binlog
     thread's THD object when the THD object is created. So we're
     not going to read uninitialized memory.
   - The behavior of ndb_binlog thread does not use the state of the
     current_stmt_binlog_row_based. It is conceivable that the
     ndb_binlog thread would rely on the current_stmt_binlog_format
     in two situations:
      (1) when it calls mysql_parse;
      (2) when it calls THD::binlog_query.
     In case (1), it always clears THD::options&OPTION_BIN_LOG (because
     run_query() in ha_ndbcluster_binlog.cc is only called with
     disable_binlogging = TRUE).
     In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
  Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
  Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
  Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
  Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
  Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
  Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
   - Made decide_logging_format take care of all logic for deciding the
     logging format, and for determining the related warnings and errors.
     See comment above decide_logging_format for details.
   - Made decide_logging_format a member function of THD, since it needs
     to access private members of THD and since its purpose is to update
     the state of a THD object.
   - Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
  - Moved logic for determining unsafe warnings away from THD::binlog_query
    (and into decide_logging_format()). Now, it works like this:
    1. decide_logging_format detects that the current statement shall
       produce a warning, if it ever makes it to the binlog
    2. decide_logging_format sets a flag of THD::binlog_warning_flags.
    3. THD::binlog_query reads the flag. If the flag is set, it generates
       a warning.
  - Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
  - Added THD::binlog_warning_flags (see sql_class.cc for explanation).
  - Made decide_logging_format() and reset_for_next_command() member
    functions of THD (instead of standalone functions). This was needed
    for two reasons: (1) the functions need to access the private member
    THD::binlog_warning_flags; (2) the purpose of these functions is to
    update the staet of a THD object, so from an object-oriented point
    of view they should be member functions.
  - Encapsulated current_stmt_binlog_row_based, so it is now private and
    can only be accessed from a member function. Also changed the
    data type to an enumeration instead of a bool.
  - Removed MYSQL_QUERY_TYPE, because it was equivalent to
    STMT_QUERY_TYPE anyways.
  - When reset_current_stmt_binlog_row_based was called from the
    ndb_binlog thread, it would behave as a no-op. This special
    case has been removed, and the behavior of
    reset_current_stmt_binlog_row_based does not depend on which thread
    calls it any more. The special case did not serve any purpose,
    since the ndb binlog thread did not take the
    current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
  - Moved logic for setting row format for DELETE..LIMIT away from
    mysql_prepare_delete.
    (Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
    and rely on decide_logging_format() (sql_class.cc) to set row format.)
    This is part of the fix for BUG#45831.
  - Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
   - Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
     thd->set_current_stmt_binlog_row_based_if_mixed() from
     handle_delayed_insert(). The calls are unnecessary because they
     have already been made; they were made in the constructor of
     the `di' object.
   - Since decide_logging_format() is now a member function of THD, code
     that calls decide_logging_format() had to be updated.
   - Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
     called.
   - Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
     mysql_insert_select_prepare() (and into decide_logging_format).
     This is part of the fix for BUG#45831.
   - Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
   - Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
     This was necessary so that a statement can identify itself as a row
     injection.
   - Added appropriate setter and getter functions for the new flag.
   - Added or clarified some comments.
   - Added DBUG_ENTER()
sql/sql_load.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
   - Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
   - Since thd->binlog_warning_flags is private, it must be set in a
     member function of THD. Hence, moved the body of
     mysql_reset_thd_for_next_command() to the new member function
     THD::reset_thd_for_next_command(), and made
     mysql_reset_thd_for_next_command() call
     THD::reset_thd_for_next_command().
   - Removed confusing comment.
   - Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
  Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
  Moved logic for setting row format for UPDATE..LIMIT away from
  mysql_prepare_update.
  (Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
  and rely on decide_logging_format() (sql_class.cc) to set row format.)
  This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
  Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
  DELETE..LIMIT mark themselves as unsafe at parse time (instead
  of at execution time).
  This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
  Made exampledb accept inserts. This was needed by the new test case
  rpl_ndb_binlog_format_errors, because it needs an engine that
  is statement-only (and accepts inserts).
storage/example/ha_example.h:
  Made exampledb a statement-only engine instead of a row-only engine.
  No existing test relied exampledb's row-only capabilities. The new
  test case rpl_ndb_binlog_format_errors needs an engine that is
  statement-only.
storage/innobase/handler/ha_innodb.cc:
  - Changed error error code and message given by innodb when 
    binlog_format=STATEMENT and transaction isolation level is
    READ COMMITTED or READ UNCOMMITTED.
  - While I was here, also simplified the condition for
    checking when to give the error.

69 files changed, 4052 insertions, 6060 deletions

diff --git a/mysql-test/suite/binlog/r/binlog_innodb.result b/mysql-test/suite/binlog/r/binlog_innodb.result
index 1922897f631..4a04a7f967e 100644
--- a/mysql-test/suite/binlog/r/binlog_innodb.result
+++ b/mysql-test/suite/binlog/r/binlog_innodb.result
@@ -14,12 +14,12 @@ SET BINLOG_FORMAT=STATEMENT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
 UPDATE t1 SET b = 1*a WHERE a > 1;
-ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-UNCOMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 UPDATE t1 SET b = 2*a WHERE a > 2;
-ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-COMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
diff --git a/mysql-test/suite/binlog/r/binlog_multi_engine.result b/mysql-test/suite/binlog/r/binlog_multi_engine.result
index 9252229903b..d7636b1cb77 100644
--- a/mysql-test/suite/binlog/r/binlog_multi_engine.result
+++ b/mysql-test/suite/binlog/r/binlog_multi_engine.result
@@ -42,7 +42,7 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
@@ -68,9 +68,9 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 mysqld-bin.000001	#	Query	#	#	BEGIN
diff --git a/mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result b/mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result
index 800bb58e9cc..f4c9e4091b9 100644
--- a/mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result
+++ b/mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result
@@ -12,7 +12,11 @@ master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (null)
 master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (300)
 master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: insert delayed into t1 values (null),(null),(null),(null)
 insert delayed into t1 values (null),(null),(400),(null);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: insert delayed into t1 values (null),(null),(400),(null)
 select * from t1;
 a
 207
diff --git a/mysql-test/suite/binlog/r/binlog_stm_ps.result b/mysql-test/suite/binlog/r/binlog_stm_ps.result
index 3af525e297c..97daba735b2 100644
--- a/mysql-test/suite/binlog/r/binlog_stm_ps.result
+++ b/mysql-test/suite/binlog/r/binlog_stm_ps.result
@@ -11,7 +11,7 @@ prepare s from "insert into t1 select 100 limit ?";
 set @a=100;
 execute s using @a;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: insert into t1 select 100 limit 100
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int)
diff --git a/mysql-test/suite/binlog/r/binlog_unsafe.result b/mysql-test/suite/binlog/r/binlog_unsafe.result
index 4c2c32ad8f1..685a0f9ef57 100644
--- a/mysql-test/suite/binlog/r/binlog_unsafe.result
+++ b/mysql-test/suite/binlog/r/binlog_unsafe.result
@@ -1,210 +1,2451 @@
-==== Setup tables ====
-CREATE TABLE t1 (a INT);
+#### Setup tables ####
+CREATE TABLE t0 (a CHAR(40));
+CREATE TABLE t1 (a CHAR(40));
 CREATE TABLE t2 (a CHAR(40));
-CREATE TABLE t3 (a INT AUTO_INCREMENT PRIMARY KEY);
-CREATE TABLE trigger_table (a CHAR(7));
-CREATE TABLE trigger_table2 (a INT);
-==== Non-deterministic statements ====
-INSERT DELAYED INTO t1 VALUES (5);
-==== Some variables that *should* be unsafe ====
----- Insert directly ----
-INSERT INTO t1 VALUES (@@global.sync_binlog);
+CREATE TABLE t3 (a CHAR(40));
+CREATE TABLE ta1 (a CHAR(40));
+CREATE TABLE ta2 (a CHAR(40));
+CREATE TABLE ta3 (a CHAR(40));
+CREATE TABLE autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE double_autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TRIGGER double_autoinc_trig BEFORE INSERT ON double_autoinc_table FOR EACH ROW BEGIN
+INSERT INTO autoinc_table VALUES (NULL);
+END|
+CREATE TABLE data_table (a CHAR(40));
+INSERT INTO data_table VALUES ('foo');
+CREATE TABLE trigger_table_1 (a INT);
+CREATE TABLE trigger_table_2 (a INT);
+CREATE TABLE trigger_table_3 (a INT);
+CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "UDF_EXAMPLE_LIB";
+
+==== Testing UUID() unsafeness ====
+
+Invoking function func_retval_1 returning value from unsafe UUID() function.
+CREATE FUNCTION func_retval_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); RETURN UUID(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 VALUES (func_retval_1());
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t1 VALUES (@@session.insert_id);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_1();
+
+Invoking function func_retval_2 returning value from function func_retval_1 returning value from unsafe UUID() function.
+CREATE FUNCTION func_retval_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); RETURN func_retval_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 VALUES (func_retval_2());
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t1 VALUES (@@global.auto_increment_increment);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 VALUES (func_retval_2())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_2();
+DROP FUNCTION func_retval_2;
+
+Invoking function func_sidef_2 invoking function func_retval_1 returning value from unsafe UUID() function.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t2 SELECT UUID();
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_retval_1 returning value from unsafe UUID() function.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t2 VALUES (@@session.sql_mode);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_retval_1 returning value from unsafe UUID() function.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t2 VALUES (@@global.init_slave);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from function func_retval_1 returning value from unsafe UUID() function.
+CREATE VIEW view_retval_2 AS SELECT func_retval_1();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-INSERT INTO t2 VALUES (@@hostname);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT func_retval_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
----- Insert from stored procedure ----
-CREATE PROCEDURE proc()
-BEGIN
-INSERT INTO t1 VALUES (@@global.sync_binlog);
-INSERT INTO t1 VALUES (@@session.insert_id);
-INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-INSERT INTO t2 SELECT UUID();
-INSERT INTO t2 VALUES (@@session.sql_mode);
-INSERT INTO t2 VALUES (@@global.init_slave);
-INSERT INTO t2 VALUES (@@hostname);
-END|
-CALL proc();
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
----- Insert from stored function ----
-CREATE FUNCTION func()
-RETURNS INT
-BEGIN
-INSERT INTO t1 VALUES (@@global.sync_binlog);
-INSERT INTO t1 VALUES (@@session.insert_id);
-INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-INSERT INTO t2 SELECT UUID();
-INSERT INTO t2 VALUES (@@session.sql_mode);
-INSERT INTO t2 VALUES (@@global.init_slave);
-INSERT INTO t2 VALUES (@@hostname);
-RETURN 0;
-END|
-SELECT func();
-func()
-0
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking function func_retval_1 returning value from unsafe UUID() function.
+PREPARE prep_2 FROM "INSERT INTO t1 VALUES (func_retval_1())";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
----- Insert from trigger ----
-CREATE TRIGGER trig
-BEFORE INSERT ON trigger_table
-FOR EACH ROW
-BEGIN
-INSERT INTO t1 VALUES (@@global.sync_binlog);
-INSERT INTO t1 VALUES (@@session.insert_id);
-INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-INSERT INTO t2 SELECT UUID();
-INSERT INTO t2 VALUES (@@session.sql_mode);
-INSERT INTO t2 VALUES (@@global.init_slave);
-INSERT INTO t2 VALUES (@@hostname);
-END|
-INSERT INTO trigger_table VALUES ('bye.');
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_retval_1;
+
+Invoking function func_sidef_1 invoking unsafe UUID() function.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (UUID()); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
----- Insert from prepared statement ----
-PREPARE p1 FROM 'INSERT INTO t1 VALUES (@@global.sync_binlog)';
-PREPARE p2 FROM 'INSERT INTO t1 VALUES (@@session.insert_id)';
-PREPARE p3 FROM 'INSERT INTO t1 VALUES (@@global.auto_increment_increment)';
-PREPARE p4 FROM 'INSERT INTO t2 SELECT UUID()';
-PREPARE p5 FROM 'INSERT INTO t2 VALUES (@@session.sql_mode)';
-PREPARE p6 FROM 'INSERT INTO t2 VALUES (@@global.init_slave)';
-PREPARE p7 FROM 'INSERT INTO t2 VALUES (@@hostname)';
-EXECUTE p1;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p2;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p3;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p4;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p5;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p6;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-EXECUTE p7;
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
----- Insert from nested call of triggers / functions / procedures ----
-CREATE PROCEDURE proc1()
-INSERT INTO trigger_table VALUES ('ha!')|
-CREATE FUNCTION func2()
-RETURNS INT
-BEGIN
-CALL proc1();
-RETURN 0;
-END|
-CREATE TRIGGER trig3
-BEFORE INSERT ON trigger_table2
-FOR EACH ROW
-BEGIN
-DECLARE tmp INT;
-SELECT func2() INTO tmp;
-END|
-CREATE PROCEDURE proc4()
-INSERT INTO trigger_table2 VALUES (1)|
-CREATE FUNCTION func5()
-RETURNS INT
-BEGIN
-CALL proc4;
-RETURN 0;
-END|
-PREPARE prep6 FROM 'SELECT func5()'|
-EXECUTE prep6;
-func5()
-0
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe UUID() function.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-==== Variables that should *not* be unsafe ====
-INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
-INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe UUID() function.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe UUID() function.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe UUID() function.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe UUID() function.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe UUID() function.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (UUID()); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe UUID() function.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe UUID() function.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe UUID() function.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe UUID() function.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe UUID() function.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (UUID()); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe UUID() function.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe UUID() function.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe UUID() function.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe UUID() function.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking view view_retval_1 returning value from unsafe UUID() function.
+CREATE VIEW view_retval_1 AS SELECT UUID();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_1` AS SELECT UUID()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_1;
+
+Invoking function func_sidef_2 invoking view view_retval_1 returning value from unsafe UUID() function.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking view view_retval_1 returning value from unsafe UUID() function.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking view view_retval_1 returning value from unsafe UUID() function.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from view view_retval_1 returning value from unsafe UUID() function.
+CREATE VIEW view_retval_2 AS SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT * FROM view_retval_1
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking view view_retval_1 returning value from unsafe UUID() function.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT * FROM view_retval_1";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP VIEW view_retval_1;
+
+Invoking prepared statement prep_1 invoking unsafe UUID() function.
+PREPARE prep_1 FROM "INSERT INTO t0 VALUES (UUID())";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe UUID() function.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t0 VALUES (UUID());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (UUID())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT UUID();
+
+==== Testing @@hostname unsafeness ====
+
+Invoking function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE FUNCTION func_retval_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); RETURN @@hostname; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 VALUES (func_retval_1());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_1();
+
+Invoking function func_retval_2 returning value from function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE FUNCTION func_retval_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); RETURN func_retval_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 VALUES (func_retval_2());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 VALUES (func_retval_2())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_2();
+DROP FUNCTION func_retval_2;
+
+Invoking function func_sidef_2 invoking function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from function func_retval_1 returning value from unsafe @@hostname variable.
+CREATE VIEW view_retval_2 AS SELECT func_retval_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT func_retval_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking function func_retval_1 returning value from unsafe @@hostname variable.
+PREPARE prep_2 FROM "INSERT INTO t1 VALUES (func_retval_1())";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_retval_1;
+
+Invoking function func_sidef_1 invoking unsafe @@hostname variable.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (@@hostname); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe @@hostname variable.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe @@hostname variable.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe @@hostname variable.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe @@hostname variable.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe @@hostname variable.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe @@hostname variable.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (@@hostname); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe @@hostname variable.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe @@hostname variable.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe @@hostname variable.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe @@hostname variable.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe @@hostname variable.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (@@hostname); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe @@hostname variable.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe @@hostname variable.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe @@hostname variable.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe @@hostname variable.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking prepared statement prep_1 invoking unsafe @@hostname variable.
+PREPARE prep_1 FROM "INSERT INTO t0 VALUES (@@hostname)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe @@hostname variable.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t0 VALUES (@@hostname);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (@@hostname)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+==== Testing SELECT...LIMIT unsafeness ====
+
+Invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT * FROM data_table LIMIT 1; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe SELECT...LIMIT statement.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe SELECT...LIMIT statement.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT * FROM data_table LIMIT 1; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe SELECT...LIMIT statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe SELECT...LIMIT statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe SELECT...LIMIT statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe SELECT...LIMIT statement.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe SELECT...LIMIT statement.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT * FROM data_table LIMIT 1; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe SELECT...LIMIT statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe SELECT...LIMIT statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe SELECT...LIMIT statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe SELECT...LIMIT statement.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+CREATE VIEW view_retval_1 AS SELECT * FROM data_table LIMIT 1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_1` AS SELECT * FROM data_table LIMIT 1
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_1;
+
+Invoking function func_sidef_2 invoking view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+CREATE VIEW view_retval_2 AS SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT * FROM view_retval_1
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking view view_retval_1 returning value from unsafe SELECT...LIMIT statement.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT * FROM view_retval_1";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP VIEW view_retval_1;
+
+Invoking prepared statement prep_1 invoking unsafe SELECT...LIMIT statement.
+PREPARE prep_1 FROM "INSERT INTO t0 SELECT * FROM data_table LIMIT 1";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe SELECT...LIMIT statement.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t0 SELECT * FROM data_table LIMIT 1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT * FROM data_table LIMIT 1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM data_table LIMIT 1;
+
+==== Testing INSERT DELAYED unsafeness ====
+
+Invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT DELAYED INTO t0 VALUES (1), (2); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe INSERT DELAYED statement.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe INSERT DELAYED statement.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT DELAYED INTO t0 VALUES (1), (2); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe INSERT DELAYED statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe INSERT DELAYED statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe INSERT DELAYED statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe INSERT DELAYED statement.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe INSERT DELAYED statement.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT DELAYED INTO t0 VALUES (1), (2); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe INSERT DELAYED statement.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe INSERT DELAYED statement.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe INSERT DELAYED statement.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe INSERT DELAYED statement.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking prepared statement prep_1 invoking unsafe INSERT DELAYED statement.
+PREPARE prep_1 FROM "INSERT DELAYED INTO t0 VALUES (1), (2)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe INSERT DELAYED statement.
+* binlog_format = STATEMENT: expect warning.
+INSERT DELAYED INTO t0 VALUES (1), (2);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT DELAYED INTO t0 VALUES (1), (2)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+==== Testing unsafeness of insert of two autoinc values ====
+
+Invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO double_autoinc_table VALUES (NULL); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.double_autoinc_table)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.autoinc_table)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe update of two autoinc columns.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe update of two autoinc columns.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO double_autoinc_table VALUES (NULL); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.double_autoinc_table)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.autoinc_table)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe update of two autoinc columns.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe update of two autoinc columns.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.double_autoinc_table)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.autoinc_table)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe update of two autoinc columns.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe update of two autoinc columns.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.double_autoinc_table)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.autoinc_table)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe update of two autoinc columns.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO double_autoinc_table VALUES (NULL); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe update of two autoinc columns.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe update of two autoinc columns.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.double_autoinc_table)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.autoinc_table)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe update of two autoinc columns.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe update of two autoinc columns.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking prepared statement prep_1 invoking unsafe update of two autoinc columns.
+PREPARE prep_1 FROM "INSERT INTO double_autoinc_table VALUES (NULL)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe update of two autoinc columns.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO double_autoinc_table VALUES (NULL);
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+==== Testing unsafeness of UDF's ====
+
+Invoking function func_retval_1 returning value from unsafe UDF.
+CREATE FUNCTION func_retval_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); RETURN myfunc_int(10); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 VALUES (func_retval_1());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_1();
+
+Invoking function func_retval_2 returning value from function func_retval_1 returning value from unsafe UDF.
+CREATE FUNCTION func_retval_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); RETURN func_retval_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 VALUES (func_retval_2());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 VALUES (func_retval_2())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT func_retval_2();
+DROP FUNCTION func_retval_2;
+
+Invoking function func_sidef_2 invoking function func_retval_1 returning value from unsafe UDF.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_retval_1 returning value from unsafe UDF.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_retval_1 returning value from unsafe UDF.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 VALUES (func_retval_1()); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from function func_retval_1 returning value from unsafe UDF.
+CREATE VIEW view_retval_2 AS SELECT func_retval_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT func_retval_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking function func_retval_1 returning value from unsafe UDF.
+PREPARE prep_2 FROM "INSERT INTO t1 VALUES (func_retval_1())";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (func_retval_1())
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_retval_1;
+
+Invoking function func_sidef_1 invoking unsafe UDF.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (myfunc_int(10)); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe UDF.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe UDF.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe UDF.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe UDF.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe UDF.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe UDF.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (myfunc_int(10)); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe UDF.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe UDF.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe UDF.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe UDF.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe UDF.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 VALUES (myfunc_int(10)); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe UDF.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe UDF.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe UDF.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe UDF.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking view view_sidef_1 invoking unsafe UDF.
+CREATE VIEW view_sidef_1 AS SELECT myfunc_int(10);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_1` AS SELECT myfunc_int(10)
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT * FROM view_sidef_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_sidef_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking view view_sidef_1 invoking unsafe UDF.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_sidef_1; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_sidef_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking view view_sidef_1 invoking unsafe UDF.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_sidef_1; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_sidef_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking view view_sidef_1 invoking unsafe UDF.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_sidef_1; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_sidef_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking view view_sidef_1 invoking unsafe UDF.
+CREATE VIEW view_sidef_2 AS SELECT * FROM view_sidef_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT * FROM view_sidef_1
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking view view_sidef_1 invoking unsafe UDF.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT * FROM view_sidef_1";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_sidef_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP VIEW view_sidef_1;
+
+Invoking prepared statement prep_1 invoking unsafe UDF.
+PREPARE prep_1 FROM "INSERT INTO t0 VALUES (myfunc_int(10))";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe UDF.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t0 VALUES (myfunc_int(10));
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 VALUES (myfunc_int(10))
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+==== Testing unsafeness of access to mysql.general_log ====
+
+Invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+CREATE FUNCTION func_sidef_1() RETURNS VARCHAR(100) BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT func_sidef_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_sidef_2 invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+CREATE VIEW view_sidef_2 AS SELECT func_sidef_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_sidef_2` AS SELECT func_sidef_1()
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_sidef_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_sidef_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP VIEW view_sidef_2;
+
+Invoking prepared statement prep_2 invoking function func_sidef_1 invoking unsafe use of mysql.general_log.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT func_sidef_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT func_sidef_1()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP FUNCTION func_sidef_1;
+
+Invoking procedure proc_1 invoking unsafe use of mysql.general_log.
+CREATE PROCEDURE proc_1() BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_1();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+
+Invoking function func_sidef_2 invoking procedure proc_1 invoking unsafe use of mysql.general_log.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking procedure proc_1 invoking unsafe use of mysql.general_log.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking procedure proc_1 invoking unsafe use of mysql.general_log.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); CALL proc_1(); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking procedure proc_1 invoking unsafe use of mysql.general_log.
+PREPARE prep_2 FROM "CALL proc_1()";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta1 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PREPARE prep_2;
+DROP PROCEDURE proc_1;
+
+Invoking trigger trig_1 invoking unsafe use of mysql.general_log.
+CREATE TRIGGER trig_1 BEFORE INSERT ON trigger_table_1 FOR EACH ROW BEGIN INSERT INTO ta1 VALUES (47); INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_1 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+
+Invoking function func_sidef_2 invoking trigger trig_1 invoking unsafe use of mysql.general_log.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking trigger trig_1 invoking unsafe use of mysql.general_log.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.trigger_table_1)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t0)
+master-bin.000001	#	Table_map	#	#	table_id: # (test.ta1)
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: #
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking trigger trig_1 invoking unsafe use of mysql.general_log.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO trigger_table_1 VALUES (1); END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking prepared statement prep_2 invoking trigger trig_1 invoking unsafe use of mysql.general_log.
+PREPARE prep_2 FROM "INSERT INTO trigger_table_1 VALUES (1)";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta1 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_1 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP TRIGGER trig_1;
+
+Invoking view view_retval_1 returning value from unsafe use of mysql.general_log.
+CREATE VIEW view_retval_1 AS SELECT COUNT(*) FROM mysql.general_log;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_1` AS SELECT COUNT(*) FROM mysql.general_log
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t1 SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_1;
+
+Invoking function func_sidef_2 invoking view view_retval_1 returning value from unsafe use of mysql.general_log.
+CREATE FUNCTION func_sidef_2() RETURNS VARCHAR(100) BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; RETURN 0; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT func_sidef_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT func_sidef_2()
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP FUNCTION func_sidef_2;
+
+Invoking procedure proc_2 invoking view view_retval_1 returning value from unsafe use of mysql.general_log.
+CREATE PROCEDURE proc_2() BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+CALL proc_2();
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+Failure! Event number 3 was a 'Query', not a 'Table_map'.
+SHOW BINLOG EVENTS FROM <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	use `test`; INSERT INTO ta2 VALUES (47)
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+DROP PROCEDURE proc_2;
+
+Invoking trigger trig_2 invoking view view_retval_1 returning value from unsafe use of mysql.general_log.
+CREATE TRIGGER trig_2 BEFORE INSERT ON trigger_table_2 FOR EACH ROW BEGIN INSERT INTO ta2 VALUES (47); INSERT INTO t1 SELECT * FROM view_retval_1; END;
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO trigger_table_2 VALUES (1);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO ta2 VALUES (47)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO trigger_table_2 VALUES (1)
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP TRIGGER trig_2;
+
+Invoking view view_retval_2 returning value from view view_retval_1 returning value from unsafe use of mysql.general_log.
+CREATE VIEW view_retval_2 AS SELECT * FROM view_retval_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `view_retval_2` AS SELECT * FROM view_retval_1
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t2 SELECT * FROM view_retval_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t2 SELECT * FROM view_retval_2
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT * FROM view_retval_2;
+DROP VIEW view_retval_2;
+
+Invoking prepared statement prep_2 invoking view view_retval_1 returning value from unsafe use of mysql.general_log.
+PREPARE prep_2 FROM "INSERT INTO t1 SELECT * FROM view_retval_1";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_2;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM view_retval_1
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_2;
+DROP VIEW view_retval_1;
+
+Invoking prepared statement prep_1 invoking unsafe use of mysql.general_log.
+PREPARE prep_1 FROM "INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log";
+* binlog_format = STATEMENT: expect warning.
+EXECUTE prep_1;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+DROP PREPARE prep_1;
+
+Invoking unsafe use of mysql.general_log.
+* binlog_format = STATEMENT: expect warning.
+INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log;
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log
+* SQL_LOG_BIN = 0: expect nothing logged and no warning.
+* binlog_format = MIXED: expect row events in binlog and no warning.
+* Invoke statement so that return value is dicarded: expect no warning.
+SELECT COUNT(*) FROM mysql.general_log;
+DROP TRIGGER double_autoinc_trig;
+DROP TABLE t0, t1, t2, t3, ta1, ta2, ta3,
+autoinc_table, double_autoinc_table,
+data_table,
+trigger_table_1, trigger_table_2, trigger_table_3;
+DROP FUNCTION myfunc_int;
+==== Special system variables that should *not* be unsafe ====
+CREATE TABLE t1 (a VARCHAR(1000));
+CREATE TABLE autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
+INSERT INTO t1 VALUES (@@session.auto_increment_increment);
+INSERT INTO t1 VALUES (@@session.auto_increment_offset);
+INSERT INTO t1 VALUES (@@session.character_set_client);
+INSERT INTO t1 VALUES (@@session.character_set_connection);
+INSERT INTO t1 VALUES (@@session.character_set_database);
+INSERT INTO t1 VALUES (@@session.character_set_server);
+INSERT INTO t1 VALUES (@@session.collation_connection);
+INSERT INTO t1 VALUES (@@session.collation_database);
+INSERT INTO t1 VALUES (@@session.collation_server);
 INSERT INTO t1 VALUES (@@session.foreign_key_checks);
+INSERT INTO t1 VALUES (@@session.identity);
+INSERT INTO t1 VALUES (@@session.last_insert_id);
+INSERT INTO t1 VALUES (@@session.lc_time_names);
+INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
 INSERT INTO t1 VALUES (@@session.sql_auto_is_null);
+INSERT INTO t1 VALUES (@@session.timestamp);
+INSERT INTO t1 VALUES (@@session.time_zone);
 INSERT INTO t1 VALUES (@@session.unique_checks);
-INSERT INTO t1 VALUES (@@session.auto_increment_increment);
-INSERT INTO t1 VALUES (@@session.auto_increment_offset);
-INSERT INTO t2 VALUES (@@session.character_set_client);
-INSERT INTO t2 VALUES (@@session.collation_connection);
-INSERT INTO t2 VALUES (@@session.collation_server);
-INSERT INTO t2 VALUES (@@session.time_zone);
-INSERT INTO t2 VALUES (@@session.lc_time_names);
-INSERT INTO t2 VALUES (@@session.collation_database);
-INSERT INTO t2 VALUES (@@session.timestamp);
-INSERT INTO t2 VALUES (@@session.last_insert_id);
 SET @my_var= 4711;
 INSERT INTO t1 VALUES (@my_var);
-SET insert_id=12;
-INSERT INTO t3 VALUES (NULL);
-==== Clean up ====
-DROP PROCEDURE proc;
-DROP FUNCTION  func;
-DROP TRIGGER   trig;
-DROP PROCEDURE proc1;
-DROP FUNCTION  func2;
-DROP TRIGGER   trig3;
-DROP PROCEDURE proc4;
-DROP FUNCTION  func5;
-DROP PREPARE   prep6;
-DROP TABLE t1, t2, t3, trigger_table, trigger_table2;
+SET insert_id= 12;
+INSERT INTO autoinc_table VALUES (NULL);
+The following variables *should* give a warning, despite they are replicated.
+INSERT INTO t1 VALUES (@@session.sql_mode);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (@@session.sql_mode)
+INSERT INTO t1 VALUES (@@session.insert_id);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (@@session.insert_id)
+DROP TABLE t1, autoinc_table;
 CREATE TABLE t1(a INT, b INT, KEY(a), PRIMARY KEY(b));
 INSERT INTO t1 SELECT * FROM t1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM t1 LIMIT 1
 REPLACE INTO t1 SELECT * FROM t1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: REPLACE INTO t1 SELECT * FROM t1 LIMIT 1
 UPDATE t1 SET a=1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE t1 SET a=1 LIMIT 1
 DELETE FROM t1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: DELETE FROM t1 LIMIT 1
 CREATE PROCEDURE p1()
 BEGIN
 INSERT INTO t1 SELECT * FROM t1 LIMIT 1;
@@ -214,10 +2455,10 @@ DELETE FROM t1 LIMIT 1;
 END|
 CALL p1();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM t1 LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: REPLACE INTO t1 SELECT * FROM t1 LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE t1 SET a=1 LIMIT 1
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: DELETE FROM t1 LIMIT 1
 DROP PROCEDURE p1;
 DROP TABLE t1;
 DROP TABLE IF EXISTS t1;
@@ -225,7 +2466,7 @@ CREATE TABLE t1 (a VARCHAR(100), b VARCHAR(100));
 INSERT INTO t1 VALUES ('a','b');
 UPDATE t1 SET b = '%s%s%s%s%s%s%s%s%s%s%s%s%s%s' WHERE a = 'a' LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE t1 SET b = '%s%s%s%s%s%s%s%s%s%s%s%s%s%s' WHERE a = 'a' LIMIT 1
 DROP TABLE t1;
 DROP TABLE IF EXISTS t1, t2;
 CREATE TABLE t1(i INT PRIMARY KEY);
@@ -234,7 +2475,7 @@ CREATE TABLE t3(i INT, ch CHAR(50));
 "Should issue message Statement may not be safe to log in statement format."
 INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM t2 LIMIT 1
 CREATE FUNCTION func6()
 RETURNS INT
 BEGIN
@@ -246,7 +2487,10 @@ END|
 "Should issue message Statement may not be safe to log in statement format only once"
 INSERT INTO t3 VALUES(func6(), UUID());
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (10)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (11)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES (12)
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t3 VALUES(func6(), UUID())
 "Check whether SET @@SQL_LOG_BIN = 0/1 doesn't work in substatements"
 CREATE FUNCTION fun_check_log_bin() RETURNS INT
 BEGIN
@@ -259,7 +2503,7 @@ SELECT fun_check_log_bin();
 fun_check_log_bin()
 100
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES(@@global.sync_binlog)
 "SQL_LOG_BIN should be ON still"
 SHOW VARIABLES LIKE "SQL_LOG_BIN";
 Variable_name	Value
@@ -315,16 +2559,50 @@ CREATE TABLE t1(i INT PRIMARY KEY);
 CREATE TABLE t2(i INT PRIMARY KEY);
 INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 SELECT * FROM t2 LIMIT 1
 INSERT INTO t1 VALUES(@@global.sync_binlog);
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t1 VALUES(@@global.sync_binlog)
 UPDATE t1 SET i = 999 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE t1 SET i = 999 LIMIT 1
 DELETE FROM t1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: DELETE FROM t1 LIMIT 1
 DROP TABLE t1, t2;
 SET @@SESSION.SQL_MODE = @save_sql_mode;
+SET @old_binlog_format = @@session.binlog_format;
+SET binlog_format = MIXED;
+CREATE TABLE t1 (a INT);
+CREATE TABLE t2 (a INT);
+INSERT INTO t2 VALUES (1), (2);
+CREATE PROCEDURE proc_insert_delayed ()
+BEGIN
+INSERT DELAYED INTO t1 VALUES (1), (2);
+END|
+CREATE FUNCTION func_limit ()
+RETURNS INT
+BEGIN
+INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
+RETURN 1;
+END|
+RESET MASTER;
+CALL proc_insert_delayed();
+SELECT func_limit();
+func_limit()
+1
+show binlog events from <binlog_start>;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+master-bin.000001	#	Query	#	#	BEGIN
+master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
+master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
+master-bin.000001	#	Query	#	#	COMMIT
+SET @@session.binlog_format = @old_binlog_format;
+DROP TABLE t1, t2;
+DROP PROCEDURE proc_insert_delayed;
+DROP FUNCTION func_limit;
 "End of tests"
diff --git a/mysql-test/suite/binlog/t/binlog_innodb.test b/mysql-test/suite/binlog/t/binlog_innodb.test
index f84fd65226a..7b167a2971f 100644
--- a/mysql-test/suite/binlog/t/binlog_innodb.test
+++ b/mysql-test/suite/binlog/t/binlog_innodb.test
@@ -27,13 +27,13 @@ SET BINLOG_FORMAT=STATEMENT;
 
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE;
 UPDATE t1 SET b = 1*a WHERE a > 1;
 COMMIT;
 
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE;
 UPDATE t1 SET b = 2*a WHERE a > 2;
 COMMIT;
 
diff --git a/mysql-test/suite/binlog/t/binlog_multi_engine.test b/mysql-test/suite/binlog/t/binlog_multi_engine.test
index c8136d669e4..2e80ba427e7 100644
--- a/mysql-test/suite/binlog/t/binlog_multi_engine.test
+++ b/mysql-test/suite/binlog/t/binlog_multi_engine.test
@@ -60,7 +60,7 @@ let $wait_binlog_event= COMMIT;
 source include/wait_for_binlog_event.inc;
 
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 # Not possible to test this since NDB writes its own binlog, which
@@ -84,7 +84,7 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 # Not possible to test this since NDB writes its own binlog, which
@@ -93,7 +93,7 @@ UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 #UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
 
 source include/show_binlog_events.inc;
diff --git a/mysql-test/suite/binlog/t/binlog_unsafe-master.opt b/mysql-test/suite/binlog/t/binlog_unsafe-master.opt
new file mode 100644
index 00000000000..7d8786c156a
--- /dev/null
+++ b/mysql-test/suite/binlog/t/binlog_unsafe-master.opt
@@ -0,0 +1 @@
+$UDF_EXAMPLE_LIB_OPT
diff --git a/mysql-test/suite/binlog/t/binlog_unsafe.test b/mysql-test/suite/binlog/t/binlog_unsafe.test
index c4e1f31cbce..2bf2f477166 100644
--- a/mysql-test/suite/binlog/t/binlog_unsafe.test
+++ b/mysql-test/suite/binlog/t/binlog_unsafe.test
@@ -1,34 +1,61 @@
+# ==== Background ====
+#
+# Some statements may execute differently on master and slave when
+# logged in statement format.  Such statements are called unsafe.
+# Unsafe statements include:
+#
+#  - statements using @@variables (with a small number of exceptions;
+#    see below);
+#  - statements using certain functions, e.g., UUID();
+#  - statements using LIMIT;
+#  - INSERT DELAYED;
+#  - insert into two autoinc columns;
+#  - statements using UDF's.
+#  - statements reading from log tables in the mysql database.
+#
+# Note that statements that use stored functions, stored procedures,
+# triggers, views, or prepared statements that invoke unsafe
+# statements shall also be unsafe.
+#
+# Unsafeness of a statement shall have the following consequences:
+#
+# 1. If the binlogging is on and the unsafe statement is logged:
+#    - If binlog_format=STATEMENT, the statement shall give a warning.
+#    - If binlog_format=MIXED or binlog_format=ROW, the statement shall
+#      be logged in row format.
+#
+# 2. If binlogging is off or the statement is not logged (e.g. SELECT
+#    UUID()), no warning shall be issued and the statement shall not
+#    be logged.
+#
+# Moreover, when a sub-statement of a recursive construct (i.e.,
+# stored function, stored procedure, trigger, view, or prepared
+# statement) is unsafe and binlog_format=STATEMENT, then a warning
+# shall be issued for every recursive construct.  In effect, this
+# creates a stack trace from the top-level statement to the unsafe
+# statement.
+#
+#
 # ==== Purpose ====
 #
-# Some statements can not be written to the binlog in a safe manner
-# with statement-based replication, either because they rely on
-# features that are local to the server they are replicated from
-# (e.g., @@variables), or because they include nondeterministic
-# queries (e.g., LIMIT), or because the time at which the query is
-# executed cannot be determined (e.g., INSERT DELAYED).  Such
-# statements should be marked unsafe.  All unsafe statements should
-# give a warning.
-# Yet the warning/error message isn't issued when SQL_LOG_BIN is turned off.
-#
-# This test verifies that a warning is generated for statements that
-# should be unsafe, when they are executed under statement mode
-# logging.
-#
-# All variables should be unsafe, with some exceptions.  Therefore,
-# this test also verifies that the exceptions do *not* generare a
+# This test verifies that a warning is generated when it should,
+# according to the rules above.
+#
+# All @@variables should be unsafe, with some exceptions.  Therefore,
+# this test also verifies that the exceptions do *not* generate a
 # warning.
 #
 #
 # ==== Method ====
 #
-# We try an INSERT DELAYED statement and verify that a warning is
-# issued.
+# 1. Each type of statements listed above is executed.
+#
+# 2. Each unsafe statement is wrapped in each type of recursive
+#    construct (stored function, stored procedure, trigger, view, or
+#    prepared statement).
 #
-# We try to insert unsafe variables into a table in several ways:
-# directly with an INSERT statement, from a stored procedure, from a
-# stored function, from a trigger, from a prepared statement, and from
-# a complicated nesting of triggers, functions, procedures, and
-# prepared statements.  In all cases, a warning should be issued.
+# 3. Each unsafe statement is wrapped in two levels of recursive
+#    constructs (function invoking trigger invoking UUID(), etc).
 #
 # We try to insert the variables that should not be unsafe into a
 # table, and verify that *no* warning is issued.
@@ -38,7 +65,8 @@
 # Execute a unsafe statement calling a trigger or stored function
 # or neither when @@SQL_LOG_BIN is turned OFF,
 # no warning/error is issued
-
+#
+#
 # ==== Related bugs and worklogs ====
 #
 # WL#3339: Issue warnings when statement-based replication may fail
@@ -47,6 +75,9 @@
 # BUG#34768: nondeterministic INSERT using LIMIT logged in stmt mode if binlog_format=mixed
 # BUG#41980, SBL, INSERT .. SELECT .. LIMIT = ERROR, even when @@SQL_LOG_BIN is 0
 # BUG#42640: mysqld crashes when unsafe statements are executed (STRICT_TRANS_TABLES mode)
+# BUG#45825: INSERT DELAYED is not unsafe: logged in statement format
+# BUG#45785: LIMIT in SP does not cause RBL if binlog_format=MIXED
+#
 #
 # ==== Related test cases ====
 #
@@ -57,192 +88,265 @@
 # rpl.rpl_variables_stm tests the small subset of variables that
 # actually can be replicated safely in statement mode.
 #
-#
-# ==== Todo ====
-#
-# There are several other ways to create unsafe statements: see, e.g.,
-# WL#3339, BUG#34768.
+# rpl_ndb.rpl_ndb_binlog_format_errors tests all errors and warnings
+# related to logging format (not just 'Unsafe statement binlogged in
+# statement mode since BINLOG_FORMAT = STATEMENT').
 
 source include/have_log_bin.inc;
 source include/have_binlog_format_statement.inc;
 
---echo ==== Setup tables ====
+--echo #### Setup tables ####
 
-CREATE TABLE t1 (a INT);
+CREATE TABLE t0 (a CHAR(40));
+CREATE TABLE t1 (a CHAR(40));
 CREATE TABLE t2 (a CHAR(40));
-CREATE TABLE t3 (a INT AUTO_INCREMENT PRIMARY KEY);
-CREATE TABLE trigger_table (a CHAR(7));
-CREATE TABLE trigger_table2 (a INT);
-
-
---echo ==== Non-deterministic statements ====
-
-INSERT DELAYED INTO t1 VALUES (5);
-
-
---echo ==== Some variables that *should* be unsafe ====
-
---echo ---- Insert directly ----
-
-INSERT INTO t1 VALUES (@@global.sync_binlog);
-INSERT INTO t1 VALUES (@@session.insert_id);
-INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-INSERT INTO t2 SELECT UUID();
-INSERT INTO t2 VALUES (@@session.sql_mode);
-INSERT INTO t2 VALUES (@@global.init_slave);
-INSERT INTO t2 VALUES (@@hostname);
-
---echo ---- Insert from stored procedure ----
-
-DELIMITER |;
-CREATE PROCEDURE proc()
-BEGIN
-  INSERT INTO t1 VALUES (@@global.sync_binlog);
-  INSERT INTO t1 VALUES (@@session.insert_id);
-  INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-  INSERT INTO t2 SELECT UUID();
-  INSERT INTO t2 VALUES (@@session.sql_mode);
-  INSERT INTO t2 VALUES (@@global.init_slave);
-  INSERT INTO t2 VALUES (@@hostname);
+CREATE TABLE t3 (a CHAR(40));
+CREATE TABLE ta1 (a CHAR(40));
+CREATE TABLE ta2 (a CHAR(40));
+CREATE TABLE ta3 (a CHAR(40));
+CREATE TABLE autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE double_autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
+--DELIMITER |
+CREATE TRIGGER double_autoinc_trig BEFORE INSERT ON double_autoinc_table FOR EACH ROW BEGIN
+  INSERT INTO autoinc_table VALUES (NULL);
 END|
-DELIMITER ;|
-
-CALL proc();
+--DELIMITER ;
+CREATE TABLE data_table (a CHAR(40));
+INSERT INTO data_table VALUES ('foo');
+CREATE TABLE trigger_table_1 (a INT);
+CREATE TABLE trigger_table_2 (a INT);
+CREATE TABLE trigger_table_3 (a INT);
+--replace_result $UDF_EXAMPLE_LIB UDF_EXAMPLE_LIB
+eval CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "$UDF_EXAMPLE_LIB";
+
+# In each iteration of this loop, we select one method to make the
+# statement unsafe.
+let $unsafe_type= 0;
+while (`SELECT $unsafe_type < 7`) {
+
+  --echo
+
+  if (`SELECT $unsafe_type = 0`) {
+    --echo ==== Testing UUID() unsafeness ====
+    let $desc_0= unsafe UUID() function;
+    let $stmt_sidef_0= INSERT INTO t0 VALUES (UUID());
+    let $value_0= UUID();
+    let $sel_sidef_0=;
+    let $sel_retval_0= SELECT UUID();
+  }
+
+  if (`SELECT $unsafe_type = 1`) {
+    --echo ==== Testing @@hostname unsafeness ====
+    let $desc_0= unsafe @@hostname variable;
+    let $stmt_sidef_0= INSERT INTO t0 VALUES (@@hostname);
+    let $value_0= @@hostname;
+    let $sel_sidef_0=;
+    # $sel_retval is going to be used in views.  Views cannot execute
+    # statements that refer to @@variables.  Hence, we set $set_retval
+    # to empty instead of SELECT @@hostname.
+    let $sel_retval_0=;
+  }
+
+  if (`SELECT $unsafe_type = 2`) {
+    --echo ==== Testing SELECT...LIMIT unsafeness ====
+    let $desc_0= unsafe SELECT...LIMIT statement;
+    let $stmt_sidef_0= INSERT INTO t0 SELECT * FROM data_table LIMIT 1;
+    let $value_0=;
+    let $sel_sidef_0=;
+    let $sel_retval_0= SELECT * FROM data_table LIMIT 1;
+  }
+
+  if (`SELECT $unsafe_type = 3`) {
+    --echo ==== Testing INSERT DELAYED unsafeness ====
+    let $desc_0= unsafe INSERT DELAYED statement;
+    let $stmt_sidef_0= INSERT DELAYED INTO t0 VALUES (1), (2);
+    let $value_0=;
+    let $sel_sidef_0=;
+    let $sel_retval_0=;
+  }
+
+  if (`SELECT $unsafe_type = 4`) {
+    --echo ==== Testing unsafeness of insert of two autoinc values ====
+    let $desc_0= unsafe update of two autoinc columns;
+    let $stmt_sidef_0= INSERT INTO double_autoinc_table VALUES (NULL);
+    let $value_0=;
+    let $sel_sidef_0=;
+    let $sel_retval_0=;
+  }
+
+  if (`SELECT $unsafe_type = 5`) {
+    --echo ==== Testing unsafeness of UDF's ====
+    let $desc_0= unsafe UDF;
+    let $stmt_sidef_0= INSERT INTO t0 VALUES (myfunc_int(10));
+    let $value_0= myfunc_int(10);
+    let $sel_sidef_0= SELECT myfunc_int(10);
+    let $sel_retval_0= ;
+  }
+
+  if (`SELECT $unsafe_type = 6`) {
+    --echo ==== Testing unsafeness of access to mysql.general_log ====
+    let $desc_0= unsafe use of mysql.general_log;
+    let $stmt_sidef_0= INSERT INTO t0 SELECT COUNT(*) FROM mysql.general_log;
+    let $value_0=;
+    let $sel_sidef_0=;
+    let $sel_retval_0= SELECT COUNT(*) FROM mysql.general_log;
+  }
+
+  # In each iteration of the following loop, we select one way to
+  # enclose the unsafe statement as a sub-statement of a recursive
+  # construct (i.e., a function, procedure, trigger, view, or prepared
+  # statement).
+  #
+  # In the last iteration, $call_type_1=7, we don't create a recursive
+  # construct. Instead, we just invoke the unsafe statement directly.
+
+  let $call_type_1= 0;
+  while (`SELECT $call_type_1 < 8`) {
+    #--echo debug: level 1, types $call_type_1 -> $unsafe_type
+    let $CRC_ARG_level= 1;
+    let $CRC_ARG_type= $call_type_1;
+    let $CRC_ARG_stmt_sidef= $stmt_sidef_0;
+    let $CRC_ARG_value= $value_0;
+    let $CRC_ARG_sel_sidef= $sel_sidef_0;
+    let $CRC_ARG_sel_retval= $sel_retval_0;
+    let $CRC_ARG_desc= $desc_0;
+    source extra/rpl_tests/create_recursive_construct.inc;
+    let $stmt_sidef_1= $CRC_RET_stmt_sidef;
+    let $value_1= $CRC_RET_value;
+    let $sel_sidef_1= $CRC_RET_sel_sidef;
+    let $sel_retval_1= $CRC_RET_sel_retval;
+    let $is_toplevel_1= $CRC_RET_is_toplevel;
+    let $drop_1= $CRC_RET_drop;
+    let $desc_1= $CRC_RET_desc;
+
+    # Some statements must be top-level statements, i.e., cannot be
+    # called as a sub-statement of any recursive construct.  (One
+    # example is 'EXECUTE prepared_stmt').  When
+    # create_recursive_construct.inc creates a top-level statement, it
+    # sets $CRC_RET_is_toplevel=1.
+
+    if (!$is_toplevel_1) {
+
+      # In each iteration of this loop, we select one way to enclose
+      # the previous recursive construct in another recursive
+      # construct.
+
+      let $call_type_2= 0;
+      while (`SELECT $call_type_2 < 7`) {
+        #--echo debug: level 2, types $call_type_2 -> $call_type_1 -> $unsafe_type
+        let $CRC_ARG_level= 2;
+        let $CRC_ARG_type= $call_type_2;
+        let $CRC_ARG_stmt_sidef= $stmt_sidef_1;
+        let $CRC_ARG_value= $value_1;
+        let $CRC_ARG_sel_sidef= $sel_sidef_1;
+        let $CRC_ARG_sel_retval= $sel_retval_1;
+        let $CRC_ARG_desc= $desc_1;
+        source extra/rpl_tests/create_recursive_construct.inc;
+        let $stmt_sidef_2= $CRC_RET_stmt_sidef;
+        let $value_2= $CRC_RET_value;
+        let $sel_sidef_2= $CRC_RET_sel_sidef;
+        let $sel_retval_2= $CRC_RET_sel_retval;
+        let $is_toplevel_2= $CRC_RET_is_toplevel;
+        let $drop_2= $CRC_RET_drop;
+        let $desc_2= $CRC_RET_desc;
+
+        if (!$is_toplevel_2) {
+
+         # Conditioned out since it makes result file really big.
+
+         if (0) {
+
+          # In each iteration of this loop, we select one way to enclose
+          # the previous recursive construct in another recursive
+          # construct.
+
+          let $call_type_3= 0;
+          while (`SELECT $call_type_3 < 7`) {
+            #--echo debug: level 3, types $call_type_2 -> $call_type_2 -> $call_type_1 -> $unsafe_type
+            let $CRC_ARG_level= 3;
+            let $CRC_ARG_type= $call_type_3;
+            let $CRC_ARG_stmt_sidef= $stmt_sidef_2;
+            let $CRC_ARG_value= $value_2;
+            let $CRC_ARG_sel_sidef= $sel_sidef_2;
+            let $CRC_ARG_sel_retval= $sel_retval_2;
+            let $CRC_ARG_desc= $desc_2;
+            source extra/rpl_tests/create_recursive_construct.inc;
+
+            # Drop created object.
+            if (`SELECT '$drop_3' != ''`) {
+              eval $drop_3;
+            }
+            inc $call_type_3;
+          } # while (call_type_3)
+         } # if (0)
+        } # if (!is_toplevel_2)
+
+        # Drop created object.
+        if (`SELECT '$drop_2' != ''`) {
+          eval $drop_2;
+        }
+        inc $call_type_2;
+      } # while (call_type_2)
+    } # if (!is_toplevel_1)
+
+    # Drop created object.
+    if (`SELECT '$drop_1' != ''`) {
+      eval $drop_1;
+    }
+    inc $call_type_1;
+  } # while (call_type_1)
+
+  inc $unsafe_type;
+} # while (unsafe_type)
+
+DROP TRIGGER double_autoinc_trig;
+DROP TABLE t0, t1, t2, t3, ta1, ta2, ta3,
+  autoinc_table, double_autoinc_table,
+  data_table,
+  trigger_table_1, trigger_table_2, trigger_table_3;
+DROP FUNCTION myfunc_int;
+
+
+--echo ==== Special system variables that should *not* be unsafe ====
+
+CREATE TABLE t1 (a VARCHAR(1000));
+CREATE TABLE autoinc_table (a INT PRIMARY KEY AUTO_INCREMENT);
 
---echo ---- Insert from stored function ----
-
-DELIMITER |;
-CREATE FUNCTION func()
-RETURNS INT
-BEGIN
-  INSERT INTO t1 VALUES (@@global.sync_binlog);
-  INSERT INTO t1 VALUES (@@session.insert_id);
-  INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-  INSERT INTO t2 SELECT UUID();
-  INSERT INTO t2 VALUES (@@session.sql_mode);
-  INSERT INTO t2 VALUES (@@global.init_slave);
-  INSERT INTO t2 VALUES (@@hostname);
-  RETURN 0;
-END|
-DELIMITER ;|
-
-SELECT func();
-
---echo ---- Insert from trigger ----
-
-DELIMITER |;
-CREATE TRIGGER trig
-BEFORE INSERT ON trigger_table
-FOR EACH ROW
-BEGIN
-  INSERT INTO t1 VALUES (@@global.sync_binlog);
-  INSERT INTO t1 VALUES (@@session.insert_id);
-  INSERT INTO t1 VALUES (@@global.auto_increment_increment);
-  INSERT INTO t2 SELECT UUID();
-  INSERT INTO t2 VALUES (@@session.sql_mode);
-  INSERT INTO t2 VALUES (@@global.init_slave);
-  INSERT INTO t2 VALUES (@@hostname);
-END|
-DELIMITER ;|
-
-INSERT INTO trigger_table VALUES ('bye.');
-
---echo ---- Insert from prepared statement ----
-
-PREPARE p1 FROM 'INSERT INTO t1 VALUES (@@global.sync_binlog)';
-PREPARE p2 FROM 'INSERT INTO t1 VALUES (@@session.insert_id)';
-PREPARE p3 FROM 'INSERT INTO t1 VALUES (@@global.auto_increment_increment)';
-PREPARE p4 FROM 'INSERT INTO t2 SELECT UUID()';
-PREPARE p5 FROM 'INSERT INTO t2 VALUES (@@session.sql_mode)';
-PREPARE p6 FROM 'INSERT INTO t2 VALUES (@@global.init_slave)';
-PREPARE p7 FROM 'INSERT INTO t2 VALUES (@@hostname)';
-
-EXECUTE p1; EXECUTE p2; EXECUTE p3; EXECUTE p4; EXECUTE p5;
-EXECUTE p6; EXECUTE p7;
-
---echo ---- Insert from nested call of triggers / functions / procedures ----
-
-DELIMITER |;
-
-# proc1: cause trigger 'trig' above to be triggered.
-CREATE PROCEDURE proc1()
-  INSERT INTO trigger_table VALUES ('ha!')|
-
-# func2: call proc1 above.
-CREATE FUNCTION func2()
-RETURNS INT
-BEGIN
-  CALL proc1();
-  RETURN 0;
-END|
-
-# trig3: call func2 above
-CREATE TRIGGER trig3
-BEFORE INSERT ON trigger_table2
-FOR EACH ROW
-BEGIN
-  DECLARE tmp INT;
-  SELECT func2() INTO tmp;
-END|
-
-# proc4: cause trig3 above to be triggered.
-CREATE PROCEDURE proc4()
-  INSERT INTO trigger_table2 VALUES (1)|
-
-# func5: call proc4 above.
-CREATE FUNCTION func5()
-RETURNS INT
-BEGIN
-  CALL proc4;
-  RETURN 0;
-END|
-
-# prep6: call func5() above.
-PREPARE prep6 FROM 'SELECT func5()'|
-
-DELIMITER ;|
-
-# try a complicated call path to trigger 'trig'.
-EXECUTE prep6;
-
-
---echo ==== Variables that should *not* be unsafe ====
-
-INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
-INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
+INSERT INTO t1 VALUES (@@session.auto_increment_increment);
+INSERT INTO t1 VALUES (@@session.auto_increment_offset);
+INSERT INTO t1 VALUES (@@session.character_set_client);
+INSERT INTO t1 VALUES (@@session.character_set_connection);
+INSERT INTO t1 VALUES (@@session.character_set_database);
+INSERT INTO t1 VALUES (@@session.character_set_server);
+INSERT INTO t1 VALUES (@@session.collation_connection);
+INSERT INTO t1 VALUES (@@session.collation_database);
+INSERT INTO t1 VALUES (@@session.collation_server);
 INSERT INTO t1 VALUES (@@session.foreign_key_checks);
+INSERT INTO t1 VALUES (@@session.identity);
+INSERT INTO t1 VALUES (@@session.last_insert_id);
+INSERT INTO t1 VALUES (@@session.lc_time_names);
+INSERT INTO t1 VALUES (@@session.pseudo_thread_id);
 INSERT INTO t1 VALUES (@@session.sql_auto_is_null);
+INSERT INTO t1 VALUES (@@session.timestamp);
+INSERT INTO t1 VALUES (@@session.time_zone);
 INSERT INTO t1 VALUES (@@session.unique_checks);
-INSERT INTO t1 VALUES (@@session.auto_increment_increment);
-INSERT INTO t1 VALUES (@@session.auto_increment_offset);
-INSERT INTO t2 VALUES (@@session.character_set_client);
-INSERT INTO t2 VALUES (@@session.collation_connection);
-INSERT INTO t2 VALUES (@@session.collation_server);
-INSERT INTO t2 VALUES (@@session.time_zone);
-INSERT INTO t2 VALUES (@@session.lc_time_names);
-INSERT INTO t2 VALUES (@@session.collation_database);
-INSERT INTO t2 VALUES (@@session.timestamp);
-INSERT INTO t2 VALUES (@@session.last_insert_id);
+
 SET @my_var= 4711;
 INSERT INTO t1 VALUES (@my_var);
 
 # using insert_id implicitly should be ok.
-SET insert_id=12;
-INSERT INTO t3 VALUES (NULL);
+SET insert_id= 12;
+INSERT INTO autoinc_table VALUES (NULL);
+
+# See set_var.cc for explanation.
+--echo The following variables *should* give a warning, despite they are replicated.
+INSERT INTO t1 VALUES (@@session.sql_mode);
+INSERT INTO t1 VALUES (@@session.insert_id);
 
 
---echo ==== Clean up ====
+DROP TABLE t1, autoinc_table;
+
 
-DROP PROCEDURE proc;
-DROP FUNCTION  func;
-DROP TRIGGER   trig;
-DROP PROCEDURE proc1;
-DROP FUNCTION  func2;
-DROP TRIGGER   trig3;
-DROP PROCEDURE proc4;
-DROP FUNCTION  func5;
-DROP PREPARE   prep6;
-DROP TABLE t1, t2, t3, trigger_table, trigger_table2;
 #
 # BUG#34768 - nondeterministic INSERT using LIMIT logged in stmt mode if
 #             binlog_format=mixed
@@ -388,4 +492,41 @@ DELETE FROM t1 LIMIT 1;
 
 DROP TABLE t1, t2;
 SET @@SESSION.SQL_MODE = @save_sql_mode;
+
+#
+# BUG#45825: INSERT DELAYED is not unsafe: logged in statement format
+# BUG#45785: LIMIT in SP does not cause RBL if binlog_format=MIXED
+#
+SET @old_binlog_format = @@session.binlog_format;
+SET binlog_format = MIXED;
+
+CREATE TABLE t1 (a INT);
+CREATE TABLE t2 (a INT);
+INSERT INTO t2 VALUES (1), (2);
+
+--DELIMITER |
+CREATE PROCEDURE proc_insert_delayed ()
+BEGIN
+  INSERT DELAYED INTO t1 VALUES (1), (2);
+END|
+
+CREATE FUNCTION func_limit ()
+RETURNS INT
+BEGIN
+  INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
+  RETURN 1;
+END|
+--DELIMITER ;
+
+RESET MASTER;
+CALL proc_insert_delayed();
+SELECT func_limit();
+source include/show_binlog_events.inc;
+
+SET @@session.binlog_format = @old_binlog_format;
+DROP TABLE t1, t2;
+DROP PROCEDURE proc_insert_delayed;
+DROP FUNCTION func_limit;
+
+
 --echo "End of tests"
diff --git a/mysql-test/suite/rpl/r/rpl_events.result b/mysql-test/suite/rpl/r/rpl_events.result
index b797183f9d2..0652235a734 100644
--- a/mysql-test/suite/rpl/r/rpl_events.result
+++ b/mysql-test/suite/rpl/r/rpl_events.result
@@ -6,96 +6,6 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 SET @old_event_scheduler = @@global.event_scheduler;
 set global event_scheduler=1;
-set binlog_format=row;
-DROP EVENT IF EXISTS test.justonce;
-drop table if exists t1,t2;
-CREATE TABLE `t1` (
-`id` INT(10) UNSIGNED NOT NULL,
-`c` VARCHAR(50) NOT NULL,
-`ts` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
-PRIMARY KEY (`id`)
-) ENGINE=MyISAM DEFAULT CHARSET=utf8;
-INSERT INTO t1 (id, c) VALUES (1, 'manually');
-"Creating event test.justonce on the master"
-CREATE EVENT test.justonce ON SCHEDULE EVERY 2 SECOND DO 
-INSERT IGNORE INTO t1 (id, c) VALUES (2, 'from justonce');
-"Checking event is active on master"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'justonce';
-db	name	status	originator
-test	justonce	ENABLED	1
-"Checking event data on the master"
-ONE
-1
-"Checking event data on the slave"
-ZERO
-0
-"Checking event is inactive on slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'justonce';
-db	name	status	originator
-test	justonce	SLAVESIDE_DISABLED	1
-"Dropping event test.slave_once on the slave"
-DROP EVENT IF EXISTS test.slave_once;
-CREATE EVENT test.slave_once ON SCHEDULE EVERY 5 MINUTE STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (3, 'from slave_once');
-"Checking event status on the slave for originator value = slave's server_id"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_once';
-db	name	status	originator
-test	slave_once	ENABLED	2
-"Dropping event test.slave_once on the slave"
-DROP EVENT IF EXISTS test.slave_once;
-"Dropping event test.justonce on the master"
-DROP EVENT IF EXISTS test.justonce;
-"Creating event test.er on the master"
-CREATE EVENT test.er ON SCHEDULE EVERY 3 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er');
-"Checking event status on the master"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	ENABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er')
-"Checking event status on the slave"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	SLAVESIDE_DISABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er')
-"Altering event test.er on the master"
-ALTER EVENT test.er ON SCHEDULE EVERY 5 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er');
-"Checking event status on the master"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	ENABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er')
-"Checking event status on the slave"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	SLAVESIDE_DISABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er')
-"Dropping event test.er on the master"
-DROP EVENT test.er;
-"Checking event status on the master"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test';
-db	name	status	originator
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test';
-db	name	status	originator
-"Creating event test.slave_terminate on the slave"
-CREATE EVENT test.slave_terminate ON SCHEDULE EVERY 3 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (6, 'from slave_terminate');
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_terminate';
-db	name	status	originator
-test	slave_terminate	ENABLED	2
-"Dropping event test.slave_terminate on the slave"
-DROP EVENT test.slave_terminate;
-"Creating event test.slave_terminate with DISABLE ON SLAVE on the slave"
-CREATE EVENT test.slave_terminate ON SCHEDULE EVERY 3 SECOND DISABLE ON SLAVE DO 
-INSERT IGNORE INTO t1(c) VALUES (7, 'from slave_terminate');
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_terminate';
-db	name	status	originator
-test	slave_terminate	SLAVESIDE_DISABLED	2
-"Dropping event test.slave_terminate on the slave"
-DROP EVENT test.slave_terminate;
-"Cleanup"
-DROP TABLE t1;
-set binlog_format=statement;
 DROP EVENT IF EXISTS test.justonce;
 drop table if exists t1,t2;
 CREATE TABLE `t1` (
diff --git a/mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result b/mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result
index ad67f96db71..dc1efaf77e7 100644
--- a/mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result
+++ b/mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result
@@ -4,7 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set binlog_format=row;
 
 ***********************************************************
 ***********************************************************
@@ -1145,2285 +1144,3 @@ c1	hex(c4)	c5
 3	6231623162316231	QA
 DROP TABLE t5;
 
-set binlog_format=statement;
-
-***********************************************************
-***********************************************************
-***************** Start of Testing ************************
-***********************************************************
-***********************************************************
-* This test format == binlog_format	STATEMENT and engine == 'InnoDB'
-***********************************************************
-***********************************************************
-
-***** Testing more columns on the Master *****
-
-CREATE TABLE t1 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 FLOAT DEFAULT '2.00', 
-f6 CHAR(4) DEFAULT 'TEST',
-f7 INT DEFAULT '0',
-f8 TEXT,
-f9 LONGBLOB,
-f10 BIT(63),
-f11 VARBINARY(64))ENGINE='InnoDB';
-
-* Alter Table on Slave and drop columns f5 through f11 *
-
-alter table t1 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-
-* Insert data in Master then update and delete some rows*
-
-* Select count and 20 rows from Master *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT f1,f2,f3,f4,f5,f6,f7,f8,f9,
-hex(f10),hex(f11) FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4	f5	f6	f7	f8	f9	hex(f10)	hex(f11)
-2	2	2	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-3	3	3	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-5	5	5	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-6	6	6	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-8	8	8	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-9	9	9	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-11	11	11	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-12	12	12	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-14	14	14	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-15	15	15	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-17	17	17	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-18	18	18	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-20	20	20	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-21	21	21	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-23	23	23	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-24	24	24	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-26	26	26	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-27	27	27	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-29	29	29	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-30	30	30	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-
-* Select count and 20 rows from Slave *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT * FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-
-* Show Slave Status *
-
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-
-***** Testing Altering table def scenario *****
-
-CREATE TABLE t2 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f7 DECIMAL(17,9) default '1000.00',
-f8 MEDIUMBLOB,
-f9 NUMERIC(6,4) default '2000.00',
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='InnoDB';
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-
-CREATE TABLE t3 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f8 MEDIUMBLOB,
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='InnoDB';
-
-CREATE TABLE t4 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 DECIMAL(17,9) default '1000.00',
-f7 MEDIUMBLOB,
-f8 NUMERIC(6,4) default '2000.00',
-f9 VARCHAR(1024),
-f10 BINARY(20) not null default '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f11 CHAR(255))
-ENGINE='InnoDB';
-Warnings:
-Warning	1264	Out of range value for column 'f8' at row 1
-
-CREATE TABLE t31 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5  BIGINT,
-f6  BLOB,
-f7  DATE,
-f8  DATETIME,
-f9  FLOAT,
-f10 INT,
-f11 LONGBLOB,
-f12 LONGTEXT,
-f13 MEDIUMBLOB,
-f14 MEDIUMINT,
-f15 MEDIUMTEXT,
-f16 REAL,
-f17 SMALLINT,
-f18 TEXT,
-f19 TIME,
-f20 TIMESTAMP,
-f21 TINYBLOB,
-f22 TINYINT,
-f23 TINYTEXT,
-f24 YEAR,
-f25 BINARY(255),
-f26 BIT(64),
-f27 CHAR(255),
-f28 DECIMAL(30,7),
-f29 DOUBLE,
-f30 ENUM ('a','b', 'c') default 'a',
-f31 FLOAT,
-f32 NUMERIC(17,9),
-f33 SET ('a', 'b', 'c') default 'b',
-f34 VARBINARY(1025),
-f35 VARCHAR(257)       
-) ENGINE='InnoDB';
-
-** Alter tables on slave and drop columns **
-
-alter table t2 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11, drop
-f12;
-alter table t3 drop f5, drop f6, drop f8, drop f10, drop f11, drop f12;
-alter table t4 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-alter table t31 
-drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11,
-drop f12, drop f13, drop f14, drop f15, drop f16, drop f17, drop f18,
-drop f19, drop f20, drop f21, drop f22, drop f23, drop f24, drop f25,
-drop f26, drop f27, drop f28, drop f29, drop f30, drop f31, drop f32,
-drop f33, drop f34, drop f35;
-
-** Insert Data into Master **
-INSERT into t2 set f1=1, f2=1, f3=1, f4='first', f8='f8: medium size blob', f10='f10:
-some var char';
-INSERT into t2 values (2, 2, 2, 'second',
-2.0, 'b', 2000.0002, 'f8: medium size blob', 2000, 'f10: some var char',
-'01234567', 'c'),
-(3, 3, 3, 'third',
-3.0, 'b', 3000.0003, 'f8: medium size blob', 3000, 'f10: some var char',
-'01234567', 'c');
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-Warning	1264	Out of range value for column 'f9' at row 2
-INSERT into t3 set f1=1, f2=1, f3=1, f4='first', f10='f10: some var char';
-INSERT into t4 set f1=1, f2=1, f3=1, f4='first', f7='f7: medium size blob', f10='f10:
-binary data';
-INSERT into t31 set f1=1, f2=1, f3=1, f4='first';
-INSERT into t31 set f1=1, f2=1, f3=2, f4='second',
-f9=2.2,  f10='seven samurai', f28=222.222, f35='222';
-Warnings:
-Warning	1366	Incorrect integer value: 'seven samurai' for column 'f10' at row 1
-INSERT into t31 values (1, 1, 3, 'third',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011', 
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-      );
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-INSERT into t31 values (1, 1, 4, 'fourth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 5, 'fifth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 6, 'sixth',
-/* f5  BIGINT,  */            NULL,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         NULL
-);
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-Warning	1264	Out of range value for column 'f5' at row 2
-Warning	1264	Out of range value for column 'f24' at row 2
-Warning	1264	Out of range value for column 'f24' at row 3
-
-** Sync slave with master ** 
-** Do selects from tables **
-
-select * from t1 order by f3;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-31	31	31	second
-32	32	32	second
-33	33	33	second
-34	34	34	second
-35	35	35	second
-36	36	36	second
-37	37	37	second
-38	38	38	second
-39	39	39	second
-40	40	40	second
-41	41	41	second
-42	42	42	second
-43	43	43	second
-44	44	44	second
-45	45	45	second
-46	46	46	second
-47	47	47	second
-48	48	48	second
-49	49	49	second
-50	50	50	second
-select * from t2 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-2	2	2	second
-3	3	3	third
-select * from t3 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t4 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t31 order by f3;
-f1	f2	f3	f4
-1	1	1	first
-1	1	2	second
-1	1	3	third
-1	1	4	fourth
-1	1	5	fifth
-1	1	6	sixth
-
-** Do updates master **
-
-update t31 set f5=555555555555555 where f3=6;
-update t31 set f2=2 where f3=2;
-update t31 set f1=NULL where f3=1;
-update t31 set f3=NULL, f27=NULL, f35='f35 new value' where f3=3;
-Warnings:
-Warning	1048	Column 'f3' cannot be null
-
-** Delete from Master **
-
-delete from t1;
-delete from t2;
-delete from t3;
-delete from t4;
-delete from t31;
-
-** Check slave status **
-
-select * from t31;
-f1	f2	f3	f4
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-****************************************
-* columns in master at middle of table *
-* Expect: Proper error message         *
-****************************************
-
-** Stop and Reset Slave **
-
-STOP SLAVE;
-RESET SLAVE;
-
-** create table slave side **
-CREATE TABLE t10 (a INT PRIMARY KEY, b BLOB, c CHAR(5)
-) ENGINE='InnoDB';
-
-** Connect to master and create table **
-
-CREATE TABLE t10 (a INT KEY, b BLOB, f DOUBLE DEFAULT '233',
-c CHAR(5), e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t10 () VALUES(1,@b1,DEFAULT,'Kyle',DEFAULT),
-(2,@b1,DEFAULT,'JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t10  ***
-DROP TABLE t10;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: Proper error message              *
-*********************************************
-
-*** Create t11 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t11 (a INT PRIMARY KEY, b BLOB, c VARCHAR(254)
-) ENGINE='InnoDB';
-
-*** Create t11 on Master ***
-CREATE TABLE t11 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t11 () VALUES(1,@b1,'Testing is fun','Kyle',DEFAULT),
-(2,@b1,'Testing is cool','JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t11  ***
-DROP TABLE t11;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: This one should pass blob-text    *
-*********************************************
-
-*** Create t12 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t12 (a INT PRIMARY KEY, b BLOB, c BLOB
-) ENGINE='InnoDB';
-
-*** Create t12 on Master ***
-CREATE TABLE t12 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t12 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',DEFAULT,DEFAULT),
-(3,@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT a,hex(b),f,c,e FROM t12 ORDER BY a;
-a	hex(b)	f	c	e
-1	62316231623162316231623162316231	Kyle	test	1
-2	62316231623162316231623162316231	JOE	test	1
-3	62316231623162316231623162316231	QA	test	1
-
-*** Select on Slave ***
-SELECT a,hex(b),c FROM t12 ORDER BY a;
-a	hex(b)	c
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-*** Drop t12  ***
-DROP TABLE t12;
-
-****************************************************
-* - Alter Master adding columns at middle of table *
-*   Expect: columns added                          *
-****************************************************
-
-
-*** Create t14 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t14 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t14 on Master ***
-CREATE TABLE t14 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t14 ADD COLUMN c2 DECIMAL(8,2) AFTER c1;
-ALTER TABLE t14 ADD COLUMN c3 TEXT AFTER c2;
-
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t14 () VALUES(1,1.00,'Replication Testing Extra Col',@b1,'Kyle',DEFAULT,DEFAULT),
-(2,2.00,'This Test Should work',@b1,'JOE',DEFAULT,DEFAULT),
-(3,3.00,'If is does not, I will open a bug',@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT c1,c2,c3,hex(c4),c5,c6,c7 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5	c6	c7
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP
-
-*** Select on Slave ****
-SELECT c1,c2,c3,hex(c4),c5 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA
-
-****************************************************
-* - Alter Master Dropping columns from the middle. *
-*   Expect: columns dropped                        *
-****************************************************
-
-*** connect to master and drop columns ***
-ALTER TABLE t14 DROP COLUMN c2;
-ALTER TABLE t14 DROP COLUMN c7;
-
-*** Select from Master ***
-SELECT c1,c3,hex(c4),c5,c6 FROM t14 ORDER BY c1;
-c1	c3	hex(c4)	c5	c6
-1	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1
-2	This Test Should work	62316231623162316231623162316231	JOE	1
-3	If is does not, I will open a bug	62316231623162316231623162316231	QA	1
-
-************
-* Bug30415 *
-************
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1091
-Last_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1091
-Last_SQL_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t14  ***
-DROP TABLE t14;
-DROP TABLE t14;
-RESET MASTER;
-START SLAVE;
-
-*************************************************
-* - Alter Master adding columns at end of table *
-*   Expect: Error 1054                          *
-*************************************************
-
-*** Create t15 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t15 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t15 on Master ***
-CREATE TABLE t15 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7;
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t15 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT,3.00),
-(2,@b1,'JOE',DEFAULT,DEFAULT,3.00),
-(3,@b1,'QA',DEFAULT,DEFAULT,3.00);
-SELECT c1,hex(c4),c5,c6,c7,c2 FROM t15 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7	c2
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP	3.00
-2	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP	3.00
-3	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP	3.00
-
-********************************************
-*** Expect slave to fail with Error 1054 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1054
-Last_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1054
-Last_SQL_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t15  ***
-DROP TABLE t15;
-DROP TABLE t15;
-RESET MASTER;
-START SLAVE;
-
-************************************************
-* - Create index on Master column not on slave *
-*   Expect:Warning                             *
-************************************************
-
-*** Create t16 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t16 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t16 on Master ***
-CREATE TABLE t16 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Create Index and Data Insert ***
-CREATE INDEX part_of_c6 ON t16 (c6);
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t16 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t16 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-*****************
-*** BUG 30434 ***
-*****************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1072
-Last_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1072
-Last_SQL_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t16  ***
-DROP TABLE t16;
-DROP TABLE t16;
-RESET MASTER;
-START SLAVE;
-
-*****************************************************
-* - Delete rows using column on Master not on slave *
-*   Expect: Rows Deleted                            *
-*****************************************************
-
-*** Create t17 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t17 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t17 on Master ***
-CREATE TABLE t17 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t17 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** Delete from master **
-DELETE FROM t17 WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-DROP TABLE t17;
-
-
-*****************************************************
-* - Update row using column on Master not on slave *
-*   Expect: Rows updated                           *
-*****************************************************
-
-** Bug30674 **
-
-*** Create t18 on slave  ***
-
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t18 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t18 on Master ***
-CREATE TABLE t18 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t18 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** update from master **
-UPDATE t18 SET c5 = 'TEST' WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	TEST	3	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	TEST
-DROP TABLE t18;
-
-
-*****************************************************
-* - Insert UUID  column on Master not on slave *
-*   Expect: Rows inserted                      *
-*****************************************************
-
-*** Create t5 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t5 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t5 on Master ***
-CREATE TABLE t5 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 LONG, 
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-INSERT INTO t5 () VALUES(1,@b1,'Kyle',UUID(),DEFAULT),
-(2,@b1,'JOE',UUID(),DEFAULT),
-(3,@b1,'QA',UUID(),DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	6231623162316231	Kyle	UUID	TIME
-2	6231623162316231	JOE	UUID	TIME
-3	6231623162316231	QA	UUID	TIME
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5
-1	6231623162316231	Kyle
-2	6231623162316231	JOE
-3	6231623162316231	QA
-DROP TABLE t5;
-
-set binlog_format=mixed;
-
-***********************************************************
-***********************************************************
-***************** Start of Testing ************************
-***********************************************************
-***********************************************************
-* This test format == binlog_format	MIXED and engine == 'InnoDB'
-***********************************************************
-***********************************************************
-
-***** Testing more columns on the Master *****
-
-CREATE TABLE t1 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 FLOAT DEFAULT '2.00', 
-f6 CHAR(4) DEFAULT 'TEST',
-f7 INT DEFAULT '0',
-f8 TEXT,
-f9 LONGBLOB,
-f10 BIT(63),
-f11 VARBINARY(64))ENGINE='InnoDB';
-
-* Alter Table on Slave and drop columns f5 through f11 *
-
-alter table t1 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-
-* Insert data in Master then update and delete some rows*
-
-* Select count and 20 rows from Master *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT f1,f2,f3,f4,f5,f6,f7,f8,f9,
-hex(f10),hex(f11) FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4	f5	f6	f7	f8	f9	hex(f10)	hex(f11)
-2	2	2	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-3	3	3	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-5	5	5	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-6	6	6	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-8	8	8	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-9	9	9	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-11	11	11	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-12	12	12	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-14	14	14	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-15	15	15	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-17	17	17	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-18	18	18	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-20	20	20	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-21	21	21	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-23	23	23	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-24	24	24	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-26	26	26	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-27	27	27	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-29	29	29	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-30	30	30	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-
-* Select count and 20 rows from Slave *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT * FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-
-* Show Slave Status *
-
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-
-***** Testing Altering table def scenario *****
-
-CREATE TABLE t2 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f7 DECIMAL(17,9) default '1000.00',
-f8 MEDIUMBLOB,
-f9 NUMERIC(6,4) default '2000.00',
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='InnoDB';
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-
-CREATE TABLE t3 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f8 MEDIUMBLOB,
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='InnoDB';
-
-CREATE TABLE t4 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 DECIMAL(17,9) default '1000.00',
-f7 MEDIUMBLOB,
-f8 NUMERIC(6,4) default '2000.00',
-f9 VARCHAR(1024),
-f10 BINARY(20) not null default '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f11 CHAR(255))
-ENGINE='InnoDB';
-Warnings:
-Warning	1264	Out of range value for column 'f8' at row 1
-
-CREATE TABLE t31 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5  BIGINT,
-f6  BLOB,
-f7  DATE,
-f8  DATETIME,
-f9  FLOAT,
-f10 INT,
-f11 LONGBLOB,
-f12 LONGTEXT,
-f13 MEDIUMBLOB,
-f14 MEDIUMINT,
-f15 MEDIUMTEXT,
-f16 REAL,
-f17 SMALLINT,
-f18 TEXT,
-f19 TIME,
-f20 TIMESTAMP,
-f21 TINYBLOB,
-f22 TINYINT,
-f23 TINYTEXT,
-f24 YEAR,
-f25 BINARY(255),
-f26 BIT(64),
-f27 CHAR(255),
-f28 DECIMAL(30,7),
-f29 DOUBLE,
-f30 ENUM ('a','b', 'c') default 'a',
-f31 FLOAT,
-f32 NUMERIC(17,9),
-f33 SET ('a', 'b', 'c') default 'b',
-f34 VARBINARY(1025),
-f35 VARCHAR(257)       
-) ENGINE='InnoDB';
-
-** Alter tables on slave and drop columns **
-
-alter table t2 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11, drop
-f12;
-alter table t3 drop f5, drop f6, drop f8, drop f10, drop f11, drop f12;
-alter table t4 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-alter table t31 
-drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11,
-drop f12, drop f13, drop f14, drop f15, drop f16, drop f17, drop f18,
-drop f19, drop f20, drop f21, drop f22, drop f23, drop f24, drop f25,
-drop f26, drop f27, drop f28, drop f29, drop f30, drop f31, drop f32,
-drop f33, drop f34, drop f35;
-
-** Insert Data into Master **
-INSERT into t2 set f1=1, f2=1, f3=1, f4='first', f8='f8: medium size blob', f10='f10:
-some var char';
-INSERT into t2 values (2, 2, 2, 'second',
-2.0, 'b', 2000.0002, 'f8: medium size blob', 2000, 'f10: some var char',
-'01234567', 'c'),
-(3, 3, 3, 'third',
-3.0, 'b', 3000.0003, 'f8: medium size blob', 3000, 'f10: some var char',
-'01234567', 'c');
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-Warning	1264	Out of range value for column 'f9' at row 2
-INSERT into t3 set f1=1, f2=1, f3=1, f4='first', f10='f10: some var char';
-INSERT into t4 set f1=1, f2=1, f3=1, f4='first', f7='f7: medium size blob', f10='f10:
-binary data';
-INSERT into t31 set f1=1, f2=1, f3=1, f4='first';
-INSERT into t31 set f1=1, f2=1, f3=2, f4='second',
-f9=2.2,  f10='seven samurai', f28=222.222, f35='222';
-Warnings:
-Warning	1366	Incorrect integer value: 'seven samurai' for column 'f10' at row 1
-INSERT into t31 values (1, 1, 3, 'third',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011', 
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-      );
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-INSERT into t31 values (1, 1, 4, 'fourth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 5, 'fifth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 6, 'sixth',
-/* f5  BIGINT,  */            NULL,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         NULL
-);
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-Warning	1264	Out of range value for column 'f5' at row 2
-Warning	1264	Out of range value for column 'f24' at row 2
-Warning	1264	Out of range value for column 'f24' at row 3
-
-** Sync slave with master ** 
-** Do selects from tables **
-
-select * from t1 order by f3;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-31	31	31	second
-32	32	32	second
-33	33	33	second
-34	34	34	second
-35	35	35	second
-36	36	36	second
-37	37	37	second
-38	38	38	second
-39	39	39	second
-40	40	40	second
-41	41	41	second
-42	42	42	second
-43	43	43	second
-44	44	44	second
-45	45	45	second
-46	46	46	second
-47	47	47	second
-48	48	48	second
-49	49	49	second
-50	50	50	second
-select * from t2 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-2	2	2	second
-3	3	3	third
-select * from t3 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t4 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t31 order by f3;
-f1	f2	f3	f4
-1	1	1	first
-1	1	2	second
-1	1	3	third
-1	1	4	fourth
-1	1	5	fifth
-1	1	6	sixth
-
-** Do updates master **
-
-update t31 set f5=555555555555555 where f3=6;
-update t31 set f2=2 where f3=2;
-update t31 set f1=NULL where f3=1;
-update t31 set f3=NULL, f27=NULL, f35='f35 new value' where f3=3;
-Warnings:
-Warning	1048	Column 'f3' cannot be null
-
-** Delete from Master **
-
-delete from t1;
-delete from t2;
-delete from t3;
-delete from t4;
-delete from t31;
-
-** Check slave status **
-
-select * from t31;
-f1	f2	f3	f4
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-****************************************
-* columns in master at middle of table *
-* Expect: Proper error message         *
-****************************************
-
-** Stop and Reset Slave **
-
-STOP SLAVE;
-RESET SLAVE;
-
-** create table slave side **
-CREATE TABLE t10 (a INT PRIMARY KEY, b BLOB, c CHAR(5)
-) ENGINE='InnoDB';
-
-** Connect to master and create table **
-
-CREATE TABLE t10 (a INT KEY, b BLOB, f DOUBLE DEFAULT '233',
-c CHAR(5), e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t10 () VALUES(1,@b1,DEFAULT,'Kyle',DEFAULT),
-(2,@b1,DEFAULT,'JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t10  ***
-DROP TABLE t10;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: Proper error message              *
-*********************************************
-
-*** Create t11 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t11 (a INT PRIMARY KEY, b BLOB, c VARCHAR(254)
-) ENGINE='InnoDB';
-
-*** Create t11 on Master ***
-CREATE TABLE t11 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t11 () VALUES(1,@b1,'Testing is fun','Kyle',DEFAULT),
-(2,@b1,'Testing is cool','JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t11  ***
-DROP TABLE t11;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: This one should pass blob-text    *
-*********************************************
-
-*** Create t12 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t12 (a INT PRIMARY KEY, b BLOB, c BLOB
-) ENGINE='InnoDB';
-
-*** Create t12 on Master ***
-CREATE TABLE t12 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t12 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',DEFAULT,DEFAULT),
-(3,@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT a,hex(b),f,c,e FROM t12 ORDER BY a;
-a	hex(b)	f	c	e
-1	62316231623162316231623162316231	Kyle	test	1
-2	62316231623162316231623162316231	JOE	test	1
-3	62316231623162316231623162316231	QA	test	1
-
-*** Select on Slave ***
-SELECT a,hex(b),c FROM t12 ORDER BY a;
-a	hex(b)	c
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-*** Drop t12  ***
-DROP TABLE t12;
-
-****************************************************
-* - Alter Master adding columns at middle of table *
-*   Expect: columns added                          *
-****************************************************
-
-
-*** Create t14 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t14 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t14 on Master ***
-CREATE TABLE t14 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t14 ADD COLUMN c2 DECIMAL(8,2) AFTER c1;
-ALTER TABLE t14 ADD COLUMN c3 TEXT AFTER c2;
-
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t14 () VALUES(1,1.00,'Replication Testing Extra Col',@b1,'Kyle',DEFAULT,DEFAULT),
-(2,2.00,'This Test Should work',@b1,'JOE',DEFAULT,DEFAULT),
-(3,3.00,'If is does not, I will open a bug',@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT c1,c2,c3,hex(c4),c5,c6,c7 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5	c6	c7
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP
-
-*** Select on Slave ****
-SELECT c1,c2,c3,hex(c4),c5 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA
-
-****************************************************
-* - Alter Master Dropping columns from the middle. *
-*   Expect: columns dropped                        *
-****************************************************
-
-*** connect to master and drop columns ***
-ALTER TABLE t14 DROP COLUMN c2;
-ALTER TABLE t14 DROP COLUMN c7;
-
-*** Select from Master ***
-SELECT c1,c3,hex(c4),c5,c6 FROM t14 ORDER BY c1;
-c1	c3	hex(c4)	c5	c6
-1	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1
-2	This Test Should work	62316231623162316231623162316231	JOE	1
-3	If is does not, I will open a bug	62316231623162316231623162316231	QA	1
-
-************
-* Bug30415 *
-************
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1091
-Last_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1091
-Last_SQL_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t14  ***
-DROP TABLE t14;
-DROP TABLE t14;
-RESET MASTER;
-START SLAVE;
-
-*************************************************
-* - Alter Master adding columns at end of table *
-*   Expect: Error 1054                          *
-*************************************************
-
-*** Create t15 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t15 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t15 on Master ***
-CREATE TABLE t15 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7;
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t15 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT,3.00),
-(2,@b1,'JOE',DEFAULT,DEFAULT,3.00),
-(3,@b1,'QA',DEFAULT,DEFAULT,3.00);
-SELECT c1,hex(c4),c5,c6,c7,c2 FROM t15 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7	c2
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP	3.00
-2	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP	3.00
-3	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP	3.00
-
-********************************************
-*** Expect slave to fail with Error 1054 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1054
-Last_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1054
-Last_SQL_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t15  ***
-DROP TABLE t15;
-DROP TABLE t15;
-RESET MASTER;
-START SLAVE;
-
-************************************************
-* - Create index on Master column not on slave *
-*   Expect:Warning                             *
-************************************************
-
-*** Create t16 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t16 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t16 on Master ***
-CREATE TABLE t16 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Create Index and Data Insert ***
-CREATE INDEX part_of_c6 ON t16 (c6);
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t16 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t16 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-*****************
-*** BUG 30434 ***
-*****************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1072
-Last_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1072
-Last_SQL_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t16  ***
-DROP TABLE t16;
-DROP TABLE t16;
-RESET MASTER;
-START SLAVE;
-
-*****************************************************
-* - Delete rows using column on Master not on slave *
-*   Expect: Rows Deleted                            *
-*****************************************************
-
-*** Create t17 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t17 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t17 on Master ***
-CREATE TABLE t17 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t17 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** Delete from master **
-DELETE FROM t17 WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-DROP TABLE t17;
-
-
-*****************************************************
-* - Update row using column on Master not on slave *
-*   Expect: Rows updated                           *
-*****************************************************
-
-** Bug30674 **
-
-*** Create t18 on slave  ***
-
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t18 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t18 on Master ***
-CREATE TABLE t18 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t18 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** update from master **
-UPDATE t18 SET c5 = 'TEST' WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	TEST	3	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	TEST
-DROP TABLE t18;
-
-
-*****************************************************
-* - Insert UUID  column on Master not on slave *
-*   Expect: Rows inserted                      *
-*****************************************************
-
-*** Create t5 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t5 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='InnoDB';
-
-*** Create t5 on Master ***
-CREATE TABLE t5 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 LONG, 
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='InnoDB';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-INSERT INTO t5 () VALUES(1,@b1,'Kyle',UUID(),DEFAULT),
-(2,@b1,'JOE',UUID(),DEFAULT),
-(3,@b1,'QA',UUID(),DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	6231623162316231	Kyle	UUID	TIME
-2	6231623162316231	JOE	UUID	TIME
-3	6231623162316231	QA	UUID	TIME
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5
-1	6231623162316231	Kyle
-2	6231623162316231	JOE
-3	6231623162316231	QA
-DROP TABLE t5;
-
diff --git a/mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result b/mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result
index 8859a8e24e3..d53886f98ea 100644
--- a/mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result
+++ b/mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result
@@ -4,7 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set binlog_format=row;
 
 ***********************************************************
 ***********************************************************
@@ -1145,2285 +1144,3 @@ c1	hex(c4)	c5
 3	6231623162316231	QA
 DROP TABLE t5;
 
-set binlog_format=statement;
-
-***********************************************************
-***********************************************************
-***************** Start of Testing ************************
-***********************************************************
-***********************************************************
-* This test format == binlog_format	STATEMENT and engine == 'MyISAM'
-***********************************************************
-***********************************************************
-
-***** Testing more columns on the Master *****
-
-CREATE TABLE t1 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 FLOAT DEFAULT '2.00', 
-f6 CHAR(4) DEFAULT 'TEST',
-f7 INT DEFAULT '0',
-f8 TEXT,
-f9 LONGBLOB,
-f10 BIT(63),
-f11 VARBINARY(64))ENGINE='MyISAM';
-
-* Alter Table on Slave and drop columns f5 through f11 *
-
-alter table t1 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-
-* Insert data in Master then update and delete some rows*
-
-* Select count and 20 rows from Master *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT f1,f2,f3,f4,f5,f6,f7,f8,f9,
-hex(f10),hex(f11) FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4	f5	f6	f7	f8	f9	hex(f10)	hex(f11)
-2	2	2	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-3	3	3	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-5	5	5	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-6	6	6	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-8	8	8	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-9	9	9	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-11	11	11	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-12	12	12	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-14	14	14	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-15	15	15	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-17	17	17	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-18	18	18	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-20	20	20	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-21	21	21	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-23	23	23	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-24	24	24	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-26	26	26	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-27	27	27	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-29	29	29	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-30	30	30	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-
-* Select count and 20 rows from Slave *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT * FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-
-* Show Slave Status *
-
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-
-***** Testing Altering table def scenario *****
-
-CREATE TABLE t2 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f7 DECIMAL(17,9) default '1000.00',
-f8 MEDIUMBLOB,
-f9 NUMERIC(6,4) default '2000.00',
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='MyISAM';
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-
-CREATE TABLE t3 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f8 MEDIUMBLOB,
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='MyISAM';
-
-CREATE TABLE t4 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 DECIMAL(17,9) default '1000.00',
-f7 MEDIUMBLOB,
-f8 NUMERIC(6,4) default '2000.00',
-f9 VARCHAR(1024),
-f10 BINARY(20) not null default '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f11 CHAR(255))
-ENGINE='MyISAM';
-Warnings:
-Warning	1264	Out of range value for column 'f8' at row 1
-
-CREATE TABLE t31 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5  BIGINT,
-f6  BLOB,
-f7  DATE,
-f8  DATETIME,
-f9  FLOAT,
-f10 INT,
-f11 LONGBLOB,
-f12 LONGTEXT,
-f13 MEDIUMBLOB,
-f14 MEDIUMINT,
-f15 MEDIUMTEXT,
-f16 REAL,
-f17 SMALLINT,
-f18 TEXT,
-f19 TIME,
-f20 TIMESTAMP,
-f21 TINYBLOB,
-f22 TINYINT,
-f23 TINYTEXT,
-f24 YEAR,
-f25 BINARY(255),
-f26 BIT(64),
-f27 CHAR(255),
-f28 DECIMAL(30,7),
-f29 DOUBLE,
-f30 ENUM ('a','b', 'c') default 'a',
-f31 FLOAT,
-f32 NUMERIC(17,9),
-f33 SET ('a', 'b', 'c') default 'b',
-f34 VARBINARY(1025),
-f35 VARCHAR(257)       
-) ENGINE='MyISAM';
-
-** Alter tables on slave and drop columns **
-
-alter table t2 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11, drop
-f12;
-alter table t3 drop f5, drop f6, drop f8, drop f10, drop f11, drop f12;
-alter table t4 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-alter table t31 
-drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11,
-drop f12, drop f13, drop f14, drop f15, drop f16, drop f17, drop f18,
-drop f19, drop f20, drop f21, drop f22, drop f23, drop f24, drop f25,
-drop f26, drop f27, drop f28, drop f29, drop f30, drop f31, drop f32,
-drop f33, drop f34, drop f35;
-
-** Insert Data into Master **
-INSERT into t2 set f1=1, f2=1, f3=1, f4='first', f8='f8: medium size blob', f10='f10:
-some var char';
-INSERT into t2 values (2, 2, 2, 'second',
-2.0, 'b', 2000.0002, 'f8: medium size blob', 2000, 'f10: some var char',
-'01234567', 'c'),
-(3, 3, 3, 'third',
-3.0, 'b', 3000.0003, 'f8: medium size blob', 3000, 'f10: some var char',
-'01234567', 'c');
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-Warning	1264	Out of range value for column 'f9' at row 2
-INSERT into t3 set f1=1, f2=1, f3=1, f4='first', f10='f10: some var char';
-INSERT into t4 set f1=1, f2=1, f3=1, f4='first', f7='f7: medium size blob', f10='f10:
-binary data';
-INSERT into t31 set f1=1, f2=1, f3=1, f4='first';
-INSERT into t31 set f1=1, f2=1, f3=2, f4='second',
-f9=2.2,  f10='seven samurai', f28=222.222, f35='222';
-Warnings:
-Warning	1366	Incorrect integer value: 'seven samurai' for column 'f10' at row 1
-INSERT into t31 values (1, 1, 3, 'third',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011', 
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-      );
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-INSERT into t31 values (1, 1, 4, 'fourth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 5, 'fifth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 6, 'sixth',
-/* f5  BIGINT,  */            NULL,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         NULL
-);
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-Warning	1264	Out of range value for column 'f5' at row 2
-Warning	1264	Out of range value for column 'f24' at row 2
-Warning	1264	Out of range value for column 'f24' at row 3
-
-** Sync slave with master ** 
-** Do selects from tables **
-
-select * from t1 order by f3;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-31	31	31	second
-32	32	32	second
-33	33	33	second
-34	34	34	second
-35	35	35	second
-36	36	36	second
-37	37	37	second
-38	38	38	second
-39	39	39	second
-40	40	40	second
-41	41	41	second
-42	42	42	second
-43	43	43	second
-44	44	44	second
-45	45	45	second
-46	46	46	second
-47	47	47	second
-48	48	48	second
-49	49	49	second
-50	50	50	second
-select * from t2 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-2	2	2	second
-3	3	3	third
-select * from t3 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t4 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t31 order by f3;
-f1	f2	f3	f4
-1	1	1	first
-1	1	2	second
-1	1	3	third
-1	1	4	fourth
-1	1	5	fifth
-1	1	6	sixth
-
-** Do updates master **
-
-update t31 set f5=555555555555555 where f3=6;
-update t31 set f2=2 where f3=2;
-update t31 set f1=NULL where f3=1;
-update t31 set f3=NULL, f27=NULL, f35='f35 new value' where f3=3;
-Warnings:
-Warning	1048	Column 'f3' cannot be null
-
-** Delete from Master **
-
-delete from t1;
-delete from t2;
-delete from t3;
-delete from t4;
-delete from t31;
-
-** Check slave status **
-
-select * from t31;
-f1	f2	f3	f4
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-****************************************
-* columns in master at middle of table *
-* Expect: Proper error message         *
-****************************************
-
-** Stop and Reset Slave **
-
-STOP SLAVE;
-RESET SLAVE;
-
-** create table slave side **
-CREATE TABLE t10 (a INT PRIMARY KEY, b BLOB, c CHAR(5)
-) ENGINE='MyISAM';
-
-** Connect to master and create table **
-
-CREATE TABLE t10 (a INT KEY, b BLOB, f DOUBLE DEFAULT '233',
-c CHAR(5), e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t10 () VALUES(1,@b1,DEFAULT,'Kyle',DEFAULT),
-(2,@b1,DEFAULT,'JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t10  ***
-DROP TABLE t10;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: Proper error message              *
-*********************************************
-
-*** Create t11 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t11 (a INT PRIMARY KEY, b BLOB, c VARCHAR(254)
-) ENGINE='MyISAM';
-
-*** Create t11 on Master ***
-CREATE TABLE t11 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t11 () VALUES(1,@b1,'Testing is fun','Kyle',DEFAULT),
-(2,@b1,'Testing is cool','JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t11  ***
-DROP TABLE t11;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: This one should pass blob-text    *
-*********************************************
-
-*** Create t12 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t12 (a INT PRIMARY KEY, b BLOB, c BLOB
-) ENGINE='MyISAM';
-
-*** Create t12 on Master ***
-CREATE TABLE t12 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t12 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',DEFAULT,DEFAULT),
-(3,@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT a,hex(b),f,c,e FROM t12 ORDER BY a;
-a	hex(b)	f	c	e
-1	62316231623162316231623162316231	Kyle	test	1
-2	62316231623162316231623162316231	JOE	test	1
-3	62316231623162316231623162316231	QA	test	1
-
-*** Select on Slave ***
-SELECT a,hex(b),c FROM t12 ORDER BY a;
-a	hex(b)	c
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-*** Drop t12  ***
-DROP TABLE t12;
-
-****************************************************
-* - Alter Master adding columns at middle of table *
-*   Expect: columns added                          *
-****************************************************
-
-
-*** Create t14 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t14 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t14 on Master ***
-CREATE TABLE t14 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t14 ADD COLUMN c2 DECIMAL(8,2) AFTER c1;
-ALTER TABLE t14 ADD COLUMN c3 TEXT AFTER c2;
-
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t14 () VALUES(1,1.00,'Replication Testing Extra Col',@b1,'Kyle',DEFAULT,DEFAULT),
-(2,2.00,'This Test Should work',@b1,'JOE',DEFAULT,DEFAULT),
-(3,3.00,'If is does not, I will open a bug',@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT c1,c2,c3,hex(c4),c5,c6,c7 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5	c6	c7
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP
-
-*** Select on Slave ****
-SELECT c1,c2,c3,hex(c4),c5 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA
-
-****************************************************
-* - Alter Master Dropping columns from the middle. *
-*   Expect: columns dropped                        *
-****************************************************
-
-*** connect to master and drop columns ***
-ALTER TABLE t14 DROP COLUMN c2;
-ALTER TABLE t14 DROP COLUMN c7;
-
-*** Select from Master ***
-SELECT c1,c3,hex(c4),c5,c6 FROM t14 ORDER BY c1;
-c1	c3	hex(c4)	c5	c6
-1	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1
-2	This Test Should work	62316231623162316231623162316231	JOE	1
-3	If is does not, I will open a bug	62316231623162316231623162316231	QA	1
-
-************
-* Bug30415 *
-************
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1091
-Last_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1091
-Last_SQL_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t14  ***
-DROP TABLE t14;
-DROP TABLE t14;
-RESET MASTER;
-START SLAVE;
-
-*************************************************
-* - Alter Master adding columns at end of table *
-*   Expect: Error 1054                          *
-*************************************************
-
-*** Create t15 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t15 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t15 on Master ***
-CREATE TABLE t15 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7;
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t15 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT,3.00),
-(2,@b1,'JOE',DEFAULT,DEFAULT,3.00),
-(3,@b1,'QA',DEFAULT,DEFAULT,3.00);
-SELECT c1,hex(c4),c5,c6,c7,c2 FROM t15 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7	c2
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP	3.00
-2	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP	3.00
-3	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP	3.00
-
-********************************************
-*** Expect slave to fail with Error 1054 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1054
-Last_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1054
-Last_SQL_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t15  ***
-DROP TABLE t15;
-DROP TABLE t15;
-RESET MASTER;
-START SLAVE;
-
-************************************************
-* - Create index on Master column not on slave *
-*   Expect:Warning                             *
-************************************************
-
-*** Create t16 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t16 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t16 on Master ***
-CREATE TABLE t16 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Create Index and Data Insert ***
-CREATE INDEX part_of_c6 ON t16 (c6);
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t16 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t16 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-*****************
-*** BUG 30434 ***
-*****************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1072
-Last_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1072
-Last_SQL_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t16  ***
-DROP TABLE t16;
-DROP TABLE t16;
-RESET MASTER;
-START SLAVE;
-
-*****************************************************
-* - Delete rows using column on Master not on slave *
-*   Expect: Rows Deleted                            *
-*****************************************************
-
-*** Create t17 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t17 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t17 on Master ***
-CREATE TABLE t17 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t17 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** Delete from master **
-DELETE FROM t17 WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-DROP TABLE t17;
-
-
-*****************************************************
-* - Update row using column on Master not on slave *
-*   Expect: Rows updated                           *
-*****************************************************
-
-** Bug30674 **
-
-*** Create t18 on slave  ***
-
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t18 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t18 on Master ***
-CREATE TABLE t18 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t18 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** update from master **
-UPDATE t18 SET c5 = 'TEST' WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	TEST	3	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	TEST
-DROP TABLE t18;
-
-
-*****************************************************
-* - Insert UUID  column on Master not on slave *
-*   Expect: Rows inserted                      *
-*****************************************************
-
-*** Create t5 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t5 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t5 on Master ***
-CREATE TABLE t5 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 LONG, 
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-INSERT INTO t5 () VALUES(1,@b1,'Kyle',UUID(),DEFAULT),
-(2,@b1,'JOE',UUID(),DEFAULT),
-(3,@b1,'QA',UUID(),DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	6231623162316231	Kyle	UUID	TIME
-2	6231623162316231	JOE	UUID	TIME
-3	6231623162316231	QA	UUID	TIME
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5
-1	6231623162316231	Kyle
-2	6231623162316231	JOE
-3	6231623162316231	QA
-DROP TABLE t5;
-
-set binlog_format=mixed;
-
-***********************************************************
-***********************************************************
-***************** Start of Testing ************************
-***********************************************************
-***********************************************************
-* This test format == binlog_format	MIXED and engine == 'MyISAM'
-***********************************************************
-***********************************************************
-
-***** Testing more columns on the Master *****
-
-CREATE TABLE t1 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 FLOAT DEFAULT '2.00', 
-f6 CHAR(4) DEFAULT 'TEST',
-f7 INT DEFAULT '0',
-f8 TEXT,
-f9 LONGBLOB,
-f10 BIT(63),
-f11 VARBINARY(64))ENGINE='MyISAM';
-
-* Alter Table on Slave and drop columns f5 through f11 *
-
-alter table t1 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-
-* Insert data in Master then update and delete some rows*
-
-* Select count and 20 rows from Master *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT f1,f2,f3,f4,f5,f6,f7,f8,f9,
-hex(f10),hex(f11) FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4	f5	f6	f7	f8	f9	hex(f10)	hex(f11)
-2	2	2	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-3	3	3	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-5	5	5	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-6	6	6	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-8	8	8	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-9	9	9	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-11	11	11	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-12	12	12	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-14	14	14	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-15	15	15	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-17	17	17	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-18	18	18	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-20	20	20	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-21	21	21	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-23	23	23	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-24	24	24	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-26	26	26	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-27	27	27	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-29	29	29	second	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-30	30	30	next	2	kaks	2	got stolen from the paradise	very fat blob	1555	123456
-
-* Select count and 20 rows from Slave *
-
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-40
-
-SELECT * FROM t1 ORDER BY f3 LIMIT 20;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-
-* Show Slave Status *
-
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-
-***** Testing Altering table def scenario *****
-
-CREATE TABLE t2 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f7 DECIMAL(17,9) default '1000.00',
-f8 MEDIUMBLOB,
-f9 NUMERIC(6,4) default '2000.00',
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='MyISAM';
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-
-CREATE TABLE t3 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 ENUM('a', 'b', 'c') default 'a',
-f8 MEDIUMBLOB,
-f10 VARCHAR(1024),
-f11 BINARY(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f12 SET('a', 'b', 'c') default 'b')
-ENGINE='MyISAM';
-
-CREATE TABLE t4 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5 DOUBLE DEFAULT '2.00', 
-f6 DECIMAL(17,9) default '1000.00',
-f7 MEDIUMBLOB,
-f8 NUMERIC(6,4) default '2000.00',
-f9 VARCHAR(1024),
-f10 BINARY(20) not null default '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0',
-f11 CHAR(255))
-ENGINE='MyISAM';
-Warnings:
-Warning	1264	Out of range value for column 'f8' at row 1
-
-CREATE TABLE t31 (f1 INT, f2 INT, f3 INT PRIMARY KEY, f4 CHAR(20),
-/* extra */
-f5  BIGINT,
-f6  BLOB,
-f7  DATE,
-f8  DATETIME,
-f9  FLOAT,
-f10 INT,
-f11 LONGBLOB,
-f12 LONGTEXT,
-f13 MEDIUMBLOB,
-f14 MEDIUMINT,
-f15 MEDIUMTEXT,
-f16 REAL,
-f17 SMALLINT,
-f18 TEXT,
-f19 TIME,
-f20 TIMESTAMP,
-f21 TINYBLOB,
-f22 TINYINT,
-f23 TINYTEXT,
-f24 YEAR,
-f25 BINARY(255),
-f26 BIT(64),
-f27 CHAR(255),
-f28 DECIMAL(30,7),
-f29 DOUBLE,
-f30 ENUM ('a','b', 'c') default 'a',
-f31 FLOAT,
-f32 NUMERIC(17,9),
-f33 SET ('a', 'b', 'c') default 'b',
-f34 VARBINARY(1025),
-f35 VARCHAR(257)       
-) ENGINE='MyISAM';
-
-** Alter tables on slave and drop columns **
-
-alter table t2 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11, drop
-f12;
-alter table t3 drop f5, drop f6, drop f8, drop f10, drop f11, drop f12;
-alter table t4 drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11;
-alter table t31 
-drop f5, drop f6, drop f7, drop f8, drop f9, drop f10, drop f11,
-drop f12, drop f13, drop f14, drop f15, drop f16, drop f17, drop f18,
-drop f19, drop f20, drop f21, drop f22, drop f23, drop f24, drop f25,
-drop f26, drop f27, drop f28, drop f29, drop f30, drop f31, drop f32,
-drop f33, drop f34, drop f35;
-
-** Insert Data into Master **
-INSERT into t2 set f1=1, f2=1, f3=1, f4='first', f8='f8: medium size blob', f10='f10:
-some var char';
-INSERT into t2 values (2, 2, 2, 'second',
-2.0, 'b', 2000.0002, 'f8: medium size blob', 2000, 'f10: some var char',
-'01234567', 'c'),
-(3, 3, 3, 'third',
-3.0, 'b', 3000.0003, 'f8: medium size blob', 3000, 'f10: some var char',
-'01234567', 'c');
-Warnings:
-Warning	1264	Out of range value for column 'f9' at row 1
-Warning	1264	Out of range value for column 'f9' at row 2
-INSERT into t3 set f1=1, f2=1, f3=1, f4='first', f10='f10: some var char';
-INSERT into t4 set f1=1, f2=1, f3=1, f4='first', f7='f7: medium size blob', f10='f10:
-binary data';
-INSERT into t31 set f1=1, f2=1, f3=1, f4='first';
-INSERT into t31 set f1=1, f2=1, f3=2, f4='second',
-f9=2.2,  f10='seven samurai', f28=222.222, f35='222';
-Warnings:
-Warning	1366	Incorrect integer value: 'seven samurai' for column 'f10' at row 1
-INSERT into t31 values (1, 1, 3, 'third',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011', 
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-      );
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-INSERT into t31 values (1, 1, 4, 'fourth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 5, 'fifth',
-/* f5  BIGINT,  */            333333333333333333333333,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         'three times three'
-       ),
-(1, 1, 6, 'sixth',
-/* f5  BIGINT,  */            NULL,
-/* f6  BLOB,  */              '3333333333333333333333',
-/* f7  DATE,  */              '2007-07-18',
-/* f8  DATETIME,  */          "2007-07-18",
-/* f9  FLOAT,  */             3.33333333,
-/* f10 INT,  */               333333333,
-/* f11 LONGBLOB,  */          '3333333333333333333',
-/* f12 LONGTEXT,  */          '3333333333333333333',
-/* f13 MEDIUMBLOB,  */        '3333333333333333333',
-/* f14 MEDIUMINT,  */         33,
-/* f15 MEDIUMTEXT,  */        3.3,
-/* f16 REAL,  */              3.3,
-/* f17 SMALLINT,  */          3,
-/* f18 TEXT,  */              '33',
-/* f19 TIME,  */              '2:59:58.999',
-/* f20 TIMESTAMP,  */         20000303000000,
-/* f21 TINYBLOB,  */          '3333',
-/* f22 TINYINT,  */           3,
-/* f23 TINYTEXT,  */          '3',
-/* f24 YEAR,  */              3000,
-/* f25 BINARY(255),  */       'three_33333',
-/* f26 BIT(64),  */           b'011',
-/* f27 CHAR(255),  */         'three',
-/* f28 DECIMAL(30,7),  */     3.333,
-/* f29 DOUBLE,  */            3.333333333333333333333333333,
-/* f30 ENUM ('a','b','c')*/   'c',
-/* f31 FLOAT,  */             3.0,
-/* f32 NUMERIC(17,9),  */     3.3333,
-/* f33 SET ('a','b','c'),*/   'c',
-/*f34 VARBINARY(1025),*/      '3333 minus 3',
-/*f35 VARCHAR(257),*/         NULL
-);
-Warnings:
-Warning	1264	Out of range value for column 'f5' at row 1
-Warning	1264	Out of range value for column 'f24' at row 1
-Warning	1264	Out of range value for column 'f5' at row 2
-Warning	1264	Out of range value for column 'f24' at row 2
-Warning	1264	Out of range value for column 'f24' at row 3
-
-** Sync slave with master ** 
-** Do selects from tables **
-
-select * from t1 order by f3;
-f1	f2	f3	f4
-2	2	2	second
-3	3	3	next
-5	5	5	second
-6	6	6	next
-8	8	8	second
-9	9	9	next
-11	11	11	second
-12	12	12	next
-14	14	14	second
-15	15	15	next
-17	17	17	second
-18	18	18	next
-20	20	20	second
-21	21	21	next
-23	23	23	second
-24	24	24	next
-26	26	26	second
-27	27	27	next
-29	29	29	second
-30	30	30	next
-31	31	31	second
-32	32	32	second
-33	33	33	second
-34	34	34	second
-35	35	35	second
-36	36	36	second
-37	37	37	second
-38	38	38	second
-39	39	39	second
-40	40	40	second
-41	41	41	second
-42	42	42	second
-43	43	43	second
-44	44	44	second
-45	45	45	second
-46	46	46	second
-47	47	47	second
-48	48	48	second
-49	49	49	second
-50	50	50	second
-select * from t2 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-2	2	2	second
-3	3	3	third
-select * from t3 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t4 order by f1;
-f1	f2	f3	f4
-1	1	1	first
-select * from t31 order by f3;
-f1	f2	f3	f4
-1	1	1	first
-1	1	2	second
-1	1	3	third
-1	1	4	fourth
-1	1	5	fifth
-1	1	6	sixth
-
-** Do updates master **
-
-update t31 set f5=555555555555555 where f3=6;
-update t31 set f2=2 where f3=2;
-update t31 set f1=NULL where f3=1;
-update t31 set f3=NULL, f27=NULL, f35='f35 new value' where f3=3;
-Warnings:
-Warning	1048	Column 'f3' cannot be null
-
-** Delete from Master **
-
-delete from t1;
-delete from t2;
-delete from t3;
-delete from t4;
-delete from t31;
-
-** Check slave status **
-
-select * from t31;
-f1	f2	f3	f4
-show slave status;;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	Yes
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-
-****************************************
-* columns in master at middle of table *
-* Expect: Proper error message         *
-****************************************
-
-** Stop and Reset Slave **
-
-STOP SLAVE;
-RESET SLAVE;
-
-** create table slave side **
-CREATE TABLE t10 (a INT PRIMARY KEY, b BLOB, c CHAR(5)
-) ENGINE='MyISAM';
-
-** Connect to master and create table **
-
-CREATE TABLE t10 (a INT KEY, b BLOB, f DOUBLE DEFAULT '233',
-c CHAR(5), e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t10 () VALUES(1,@b1,DEFAULT,'Kyle',DEFAULT),
-(2,@b1,DEFAULT,'JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 5, test.t10 has type 254
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t10  ***
-DROP TABLE t10;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: Proper error message              *
-*********************************************
-
-*** Create t11 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t11 (a INT PRIMARY KEY, b BLOB, c VARCHAR(254)
-) ENGINE='MyISAM';
-
-*** Create t11 on Master ***
-CREATE TABLE t11 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t11 () VALUES(1,@b1,'Testing is fun','Kyle',DEFAULT),
-(2,@b1,'Testing is cool','JOE',DEFAULT),
-(3,@b1,DEFAULT,'QA',DEFAULT);
-
-********************************************
-*** Expect slave to fail with Error 1523 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1535
-Last_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1535
-Last_SQL_Error	Table definition on master and slave does not match: Column 2 type mismatch - received type 252, test.t11 has type 15
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=2;
-START SLAVE;
-
-*** Drop t11  ***
-DROP TABLE t11;
-
-*********************************************
-* More columns in master at middle of table *
-* Expect: This one should pass blob-text    *
-*********************************************
-
-*** Create t12 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t12 (a INT PRIMARY KEY, b BLOB, c BLOB
-) ENGINE='MyISAM';
-
-*** Create t12 on Master ***
-CREATE TABLE t12 (a INT KEY, b BLOB, f TEXT,
-c CHAR(5) DEFAULT 'test', e INT DEFAULT '1')ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t12 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',DEFAULT,DEFAULT),
-(3,@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT a,hex(b),f,c,e FROM t12 ORDER BY a;
-a	hex(b)	f	c	e
-1	62316231623162316231623162316231	Kyle	test	1
-2	62316231623162316231623162316231	JOE	test	1
-3	62316231623162316231623162316231	QA	test	1
-
-*** Select on Slave ***
-SELECT a,hex(b),c FROM t12 ORDER BY a;
-a	hex(b)	c
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-*** Drop t12  ***
-DROP TABLE t12;
-
-****************************************************
-* - Alter Master adding columns at middle of table *
-*   Expect: columns added                          *
-****************************************************
-
-
-*** Create t14 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t14 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t14 on Master ***
-CREATE TABLE t14 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t14 ADD COLUMN c2 DECIMAL(8,2) AFTER c1;
-ALTER TABLE t14 ADD COLUMN c3 TEXT AFTER c2;
-
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t14 () VALUES(1,1.00,'Replication Testing Extra Col',@b1,'Kyle',DEFAULT,DEFAULT),
-(2,2.00,'This Test Should work',@b1,'JOE',DEFAULT,DEFAULT),
-(3,3.00,'If is does not, I will open a bug',@b1,'QA',DEFAULT,DEFAULT);
-
-SELECT c1,c2,c3,hex(c4),c5,c6,c7 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5	c6	c7
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP
-
-*** Select on Slave ****
-SELECT c1,c2,c3,hex(c4),c5 FROM t14 ORDER BY c1;
-c1	c2	c3	hex(c4)	c5
-1	1.00	Replication Testing Extra Col	62316231623162316231623162316231	Kyle
-2	2.00	This Test Should work	62316231623162316231623162316231	JOE
-3	3.00	If is does not, I will open a bug	62316231623162316231623162316231	QA
-
-****************************************************
-* - Alter Master Dropping columns from the middle. *
-*   Expect: columns dropped                        *
-****************************************************
-
-*** connect to master and drop columns ***
-ALTER TABLE t14 DROP COLUMN c2;
-ALTER TABLE t14 DROP COLUMN c7;
-
-*** Select from Master ***
-SELECT c1,c3,hex(c4),c5,c6 FROM t14 ORDER BY c1;
-c1	c3	hex(c4)	c5	c6
-1	Replication Testing Extra Col	62316231623162316231623162316231	Kyle	1
-2	This Test Should work	62316231623162316231623162316231	JOE	1
-3	If is does not, I will open a bug	62316231623162316231623162316231	QA	1
-
-************
-* Bug30415 *
-************
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1091
-Last_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1091
-Last_SQL_Error	Error 'Can't DROP 'c7'; check that column/key exists' on query. Default database: 'test'. Query: 'ALTER TABLE t14 DROP COLUMN c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t14  ***
-DROP TABLE t14;
-DROP TABLE t14;
-RESET MASTER;
-START SLAVE;
-
-*************************************************
-* - Alter Master adding columns at end of table *
-*   Expect: Error 1054                          *
-*************************************************
-
-*** Create t15 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t15 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t15 on Master ***
-CREATE TABLE t15 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7;
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t15 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT,3.00),
-(2,@b1,'JOE',DEFAULT,DEFAULT,3.00),
-(3,@b1,'QA',DEFAULT,DEFAULT,3.00);
-SELECT c1,hex(c4),c5,c6,c7,c2 FROM t15 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7	c2
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP	3.00
-2	62316231623162316231623162316231	JOE	1	CURRENT_TIMESTAMP	3.00
-3	62316231623162316231623162316231	QA	1	CURRENT_TIMESTAMP	3.00
-
-********************************************
-*** Expect slave to fail with Error 1054 ***
-********************************************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1054
-Last_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1054
-Last_SQL_Error	Error 'Unknown column 'c7' in 't15'' on query. Default database: 'test'. Query: 'ALTER TABLE t15 ADD COLUMN c2 DECIMAL(8,2) AFTER c7'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t15  ***
-DROP TABLE t15;
-DROP TABLE t15;
-RESET MASTER;
-START SLAVE;
-
-************************************************
-* - Create index on Master column not on slave *
-*   Expect:Warning                             *
-************************************************
-
-*** Create t16 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t16 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t16 on Master ***
-CREATE TABLE t16 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Create Index and Data Insert ***
-CREATE INDEX part_of_c6 ON t16 (c6);
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t16 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t16 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-*****************
-*** BUG 30434 ***
-*****************
-
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	root
-Master_Port	#
-Connect_Retry	1
-Master_Log_File	master-bin.000001
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	master-bin.000001
-Slave_IO_Running	Yes
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	1072
-Last_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	1072
-Last_SQL_Error	Error 'Key column 'c6' doesn't exist in table' on query. Default database: 'test'. Query: 'CREATE INDEX part_of_c6 ON t16 (c6)'
-STOP SLAVE;
-RESET SLAVE;
-
-*** Drop t16  ***
-DROP TABLE t16;
-DROP TABLE t16;
-RESET MASTER;
-START SLAVE;
-
-*****************************************************
-* - Delete rows using column on Master not on slave *
-*   Expect: Rows Deleted                            *
-*****************************************************
-
-*** Create t17 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t17 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t17 on Master ***
-CREATE TABLE t17 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t17 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** Delete from master **
-DELETE FROM t17 WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t17 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-DROP TABLE t17;
-
-
-*****************************************************
-* - Update row using column on Master not on slave *
-*   Expect: Rows updated                           *
-*****************************************************
-
-** Bug30674 **
-
-*** Create t18 on slave  ***
-
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t18 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t18 on Master ***
-CREATE TABLE t18 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 INT DEFAULT '1',
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-set @b1 = concat(@b1,@b1);
-INSERT INTO t18 () VALUES(1,@b1,'Kyle',DEFAULT,DEFAULT),
-(2,@b1,'JOE',2,DEFAULT),
-(3,@b1,'QA',3,DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	QA	3	CURRENT_TIMESTAMP
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	QA
-
-** update from master **
-UPDATE t18 SET c5 = 'TEST' WHERE c6 = 3;
-SELECT c1,hex(c4),c5,c6,c7 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	62316231623162316231623162316231	Kyle	1	CURRENT_TIMESTAMP
-2	62316231623162316231623162316231	JOE	2	CURRENT_TIMESTAMP
-3	62316231623162316231623162316231	TEST	3	CURRENT_TIMESTAMP
-
-** Check slave **
-SELECT c1,hex(c4),c5 FROM t18 ORDER BY c1;
-c1	hex(c4)	c5
-1	62316231623162316231623162316231	Kyle
-2	62316231623162316231623162316231	JOE
-3	62316231623162316231623162316231	TEST
-DROP TABLE t18;
-
-
-*****************************************************
-* - Insert UUID  column on Master not on slave *
-*   Expect: Rows inserted                      *
-*****************************************************
-
-*** Create t5 on slave  ***
-STOP SLAVE;
-RESET SLAVE;
-CREATE TABLE t5 (c1 INT PRIMARY KEY, c4 BLOB, c5 CHAR(5)
-) ENGINE='MyISAM';
-
-*** Create t5 on Master ***
-CREATE TABLE t5 (c1 INT KEY, c4 BLOB, c5 CHAR(5),
-c6 LONG, 
-c7 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
-)ENGINE='MyISAM';
-RESET MASTER;
-
-*** Start Slave ***
-START SLAVE;
-
-*** Master Data Insert ***
-set @b1 = 'b1b1b1b1';
-INSERT INTO t5 () VALUES(1,@b1,'Kyle',UUID(),DEFAULT),
-(2,@b1,'JOE',UUID(),DEFAULT),
-(3,@b1,'QA',UUID(),DEFAULT);
-SELECT c1,hex(c4),c5,c6,c7 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5	c6	c7
-1	6231623162316231	Kyle	UUID	TIME
-2	6231623162316231	JOE	UUID	TIME
-3	6231623162316231	QA	UUID	TIME
-
-** Select * from Slave **
-SELECT c1,hex(c4),c5 FROM t5 ORDER BY c1;
-c1	hex(c4)	c5
-1	6231623162316231	Kyle
-2	6231623162316231	JOE
-3	6231623162316231	QA
-DROP TABLE t5;
-
diff --git a/mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result b/mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result
index e7a912b75fa..960833b85d8 100644
--- a/mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result
+++ b/mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result
@@ -46,7 +46,6 @@ engine = INNODB;
 insert into t1 set b=1;
 insert into t2 set a=1, b=1;
 set foreign_key_checks=0;
-set @@session.binlog_format=row;
 delete from t1;
 must sync w/o a problem (could not with the buggy code)
 select count(*) from t1 /* must be zero */;
diff --git a/mysql-test/suite/rpl/r/rpl_idempotency.result b/mysql-test/suite/rpl/r/rpl_idempotency.result
index 3341c03db0f..fb827fd347b 100644
--- a/mysql-test/suite/rpl/r/rpl_idempotency.result
+++ b/mysql-test/suite/rpl/r/rpl_idempotency.result
@@ -6,11 +6,12 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 call mtr.add_suppression("Slave: Can\'t find record in \'t1\' Error_code: 1032");
 call mtr.add_suppression("Slave: Cannot add or update a child row: a foreign key constraint fails .* Error_code: 1452");
-SET @old_slave_exec_mode= @@global.slave_exec_mode;
 CREATE TABLE t1 (a INT PRIMARY KEY);
 CREATE TABLE t2 (a INT);
 INSERT INTO t1 VALUES (-1),(-2),(-3);
 INSERT INTO t2 VALUES (-1),(-2),(-3);
+SET @old_slave_exec_mode= @@global.slave_exec_mode;
+SET @@global.slave_exec_mode= IDEMPOTENT;
 DELETE FROM t1 WHERE a = -2;
 DELETE FROM t2 WHERE a = -2;
 DELETE FROM t1 WHERE a = -2;
@@ -72,158 +73,4 @@ a
 Last_SQL_Error
 0
 DROP TABLE t1, t2;
-select @@global.slave_exec_mode /* must be IDEMPOTENT */;
-@@global.slave_exec_mode
-IDEMPOTENT
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-select * from ti1 order by b /* must be (1),(2),(3) */;
-b
-1
-2
-3
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-a	b
-1	1
-2	2
-set @save_binlog_format= @@session.binlog_format;
-set @@session.binlog_format= row;
-delete from ti1 where b=1;
-select * from ti1 order by b /* must be (2),(3) */;
-b
-2
-3
-select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
-b
-1
-2
-3
-delete from ti1 where b=3;
-insert into ti2 set a=3, b=3;
-select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
-a	b
-1	1
-2	2
-set global slave_exec_mode='IDEMPOTENT';
-set global slave_exec_mode='STRICT';
-set global slave_exec_mode='IDEMPOTENT,STRICT';
-ERROR HY000: Ambiguous slave modes combination. 
-select @@global.slave_exec_mode /* must be STRICT */;
-@@global.slave_exec_mode
-STRICT
-*** foreign keys errors as above now forces to stop
-set foreign_key_checks=0;
-drop table ti2, ti1;
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-select * from ti1 order by b /* must be (1),(2),(3) */;
-b
-1
-2
-3
-*** conspire future problem
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-a	b
-1	1
-2	2
-delete from ti1 where b=1 /* offending delete event */;
-select * from ti1 order by b /* must be (2),(3) */;
-b
-2
-3
-*** slave must stop (Trying to delete a referenced foreing key)
-Last_SQL_Error
-1451
-select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
-b
-1
-2
-3
-set foreign_key_checks= 0;
-delete from ti2 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-*** conspire the following insert failure
-*** conspire future problem
-delete from ti1 where b=3;
-insert into ti2 set a=3, b=3 /* offending write event */;
-*** slave must stop (Trying to insert an invalid foreign key)
-Last_SQL_Error
-1452
-select * from ti2 order by b /* must be (2,2) */;
-a	b
-2	2
-set foreign_key_checks= 0;
-insert into ti1 set b=3;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-select * from ti2 order by b /* must be (2,2),(3,3) */;
-a	b
-2	2
-3	3
-*** other errors
-*** conspiring query
-insert into ti1 set b=1;
-insert into ti1 set b=1 /* offending write event */;
-*** slave must stop (Trying to insert a dupliacte key)
-Last_SQL_Error
-1062
-set foreign_key_checks= 0;
-delete from ti1 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-CREATE TABLE t1 (a INT PRIMARY KEY);
-CREATE TABLE t2 (a INT);
-INSERT INTO t1 VALUES (-1),(-2),(-3);
-INSERT INTO t2 VALUES (-1),(-2),(-3);
-DELETE FROM t1 WHERE a = -2;
-DELETE FROM t2 WHERE a = -2;
-DELETE FROM t1 WHERE a = -2;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-DELETE FROM t2 WHERE a = -2;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-UPDATE t1 SET a = 1 WHERE a = -1;
-UPDATE t2 SET a = 1 WHERE a = -1;
-UPDATE t1 SET a = 1 WHERE a = -1;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-UPDATE t2 SET a = 1 WHERE a = -1;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
 SET @@global.slave_exec_mode= @old_slave_exec_mode;
-set @@session.binlog_format= @save_binlog_format;
-drop table t1,t2,ti2,ti1;
-*** end of tests
diff --git a/mysql-test/suite/rpl/r/rpl_found_rows.result b/mysql-test/suite/rpl/r/rpl_mix_found_rows.result
index 45a931872cf..a3bc1934a70 100644
--- a/mysql-test/suite/rpl/r/rpl_found_rows.result
+++ b/mysql-test/suite/rpl/r/rpl_mix_found_rows.result
@@ -4,8 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-==== 0. Setting it all up ====
-SET BINLOG_FORMAT=STATEMENT;
+==== Initialize ====
 **** On Master ****
 CREATE TABLE t1 (a INT);
 CREATE TABLE logtbl (sect INT, test INT, count INT);
@@ -16,106 +15,12 @@ INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
-#### 1. Using statement mode ####
-==== 1.1. Simple test ====
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,1,@a);
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-a
-1
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,2,@a);
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-sect	test	count
-1	1	183
-1	2	3
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-sect	test	count
-1	1	183
-1	2	3
-==== 1.2. Stored procedure ====
-**** On Master ****
-CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
-DECLARE cnt INT;
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO cnt;
-INSERT INTO logtbl VALUES(sect,test,cnt);
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO cnt;
-INSERT INTO logtbl VALUES(sect,test+1,cnt);
-END $$
-CALL calc_and_log(2,1);
-a
-1
-a
-7
-CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
-INSERT INTO logtbl VALUES (sect,test,found_rows);
-END $$
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @found_rows;
-CALL just_log(2,3,@found_rows);
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-sect	test	count
-2	1	3
-2	2	183
-2	3	183
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-sect	test	count
-2	1	3
-2	2	183
-2	3	183
-==== 1.3. Stored functions ====
-**** On Master ****
-CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
-RETURNS INT
-BEGIN
-INSERT INTO logtbl VALUES(sect,test,found_rows);
-RETURN found_rows;
-END $$
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @found_rows;
-SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
-log_rows(3,1,@found_rows)	log_rows(3,2,@found_rows)
-183	183
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-sect	test	count
-3	1	183
-3	2	183
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-sect	test	count
-3	1	183
-3	2	183
-==== 1.9. Cleanup ====
-**** On Master ****
-DELETE FROM logtbl;
-DROP PROCEDURE just_log;
-DROP PROCEDURE calc_and_log;
-DROP FUNCTION log_rows;
-**** Resetting master and slave ****
-include/stop_slave.inc
-RESET SLAVE;
-RESET MASTER;
-include/start_slave.inc
-#### 2. Using mixed mode ####
-==== 2.1. Checking a procedure ====
+==== Checking a procedure ====
 **** On Master ****
-SET BINLOG_FORMAT=MIXED;
 CREATE PROCEDURE just_log(sect INT, test INT) BEGIN
 INSERT INTO logtbl VALUES (sect,test,FOUND_ROWS());
 END $$
 **** On Master 1 ****
-SET BINLOG_FORMAT=MIXED;
 SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
 a
 7
@@ -148,7 +53,7 @@ sect	test	count
 1	2	183
 1	3	3
 1	4	183
-==== 2.1. Checking a stored function ====
+==== Checking a stored function ====
 **** On Master ****
 CREATE FUNCTION log_rows(sect INT, test INT)
 RETURNS INT
diff --git a/mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result b/mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result
new file mode 100644
index 00000000000..fb48172ed93
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result
@@ -0,0 +1,71 @@
+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+CREATE SCHEMA IF NOT EXISTS mysqlslap;
+USE mysqlslap;
+select @@global.binlog_format;
+@@global.binlog_format
+MIXED
+CREATE TABLE t1 (id INT primary key auto_increment, name VARCHAR(64));
+FLUSH TABLE t1;
+SELECT COUNT(*) FROM t1;
+COUNT(*)
+5000
+use mysqlslap;
+SELECT COUNT(*) FROM t1;
+COUNT(*)
+5000
+truncate table t1;
+insert delayed into t1 values(10, "my name");
+insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
+flush table t1;
+select * from t1;
+id	name
+10	my name
+20	James Bond
+select * from t1;
+id	name
+10	my name
+20	James Bond
+delete from t1 where id!=10;
+insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
+flush table t1;
+select * from t1;
+id	name
+10	my name
+20	is Bond
+select * from t1;
+id	name
+10	my name
+20	is Bond
+USE test;
+DROP SCHEMA mysqlslap;
+use test;
+FLUSH LOGS;
+FLUSH LOGS;
+CREATE TABLE t1(a int, UNIQUE(a));
+INSERT DELAYED IGNORE INTO t1 VALUES(1);
+INSERT DELAYED IGNORE INTO t1 VALUES(1);
+flush table t1;
+show binlog events in 'master-bin.000002' LIMIT 2,2;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+x	x	x	x	x	BEGIN
+x	x	x	x	x	table_id: # (test.t1)
+select * from t1;
+a
+1
+On slave
+show binlog events in 'slave-bin.000002' LIMIT 2,2;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+x	x	x	x	x	BEGIN
+x	x	x	x	x	table_id: # (test.t1)
+select * from t1;
+a
+1
+drop table t1;
+FLUSH LOGS;
+FLUSH LOGS;
+End of 5.0 tests
diff --git a/mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result b/mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result
index 2e707fb62c1..75d50ed756c 100644
--- a/mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result
+++ b/mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result
@@ -4,12 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-SET @old_binlog_format= @@global.binlog_format;
-SET BINLOG_FORMAT=MIXED;
-SET GLOBAL BINLOG_FORMAT=MIXED;
-SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
-@@GLOBAL.BINLOG_FORMAT	@@SESSION.BINLOG_FORMAT
-MIXED	MIXED
 **** On Master ****
 CREATE TABLE t1 (a INT, b LONG);
 INSERT INTO t1 VALUES (1,1), (2,2);
@@ -73,4 +67,3 @@ slave-bin.000001	#	Table_map	1	#	table_id: # (test.t1)
 slave-bin.000001	#	Write_rows	1	#	table_id: # flags: STMT_END_F
 slave-bin.000001	#	Query	1	#	COMMIT
 DROP TABLE IF EXISTS t1;
-SET @@global.binlog_format= @old_binlog_format;
diff --git a/mysql-test/suite/rpl/r/rpl_row_idempotency.result b/mysql-test/suite/rpl/r/rpl_row_idempotency.result
new file mode 100644
index 00000000000..c2d1f3ffdd3
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_row_idempotency.result
@@ -0,0 +1,160 @@
+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+set @old_slave_exec_mode= @@global.slave_exec_mode;
+set @@global.slave_exec_mode= IDEMPOTENT;
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+b
+1
+2
+3
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+a	b
+1	1
+2	2
+set @save_binlog_format= @@session.binlog_format;
+set @@session.binlog_format= row;
+delete from ti1 where b=1;
+select * from ti1 order by b /* must be (2),(3) */;
+b
+2
+3
+select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
+b
+1
+2
+3
+delete from ti1 where b=3;
+insert into ti2 set a=3, b=3;
+select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
+a	b
+1	1
+2	2
+set global slave_exec_mode='IDEMPOTENT';
+set global slave_exec_mode='STRICT';
+set global slave_exec_mode='IDEMPOTENT,STRICT';
+ERROR HY000: Ambiguous slave modes combination. 
+select @@global.slave_exec_mode /* must be STRICT */;
+@@global.slave_exec_mode
+STRICT
+*** foreign keys errors as above now forces to stop
+set foreign_key_checks=0;
+drop table ti2, ti1;
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+b
+1
+2
+3
+*** conspire future problem
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+a	b
+1	1
+2	2
+delete from ti1 where b=1 /* offending delete event */;
+select * from ti1 order by b /* must be (2),(3) */;
+b
+2
+3
+*** slave must stop (Trying to delete a referenced foreing key)
+Last_SQL_Error
+1451
+select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
+b
+1
+2
+3
+set foreign_key_checks= 0;
+delete from ti2 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+*** conspire the following insert failure
+*** conspire future problem
+delete from ti1 where b=3;
+insert into ti2 set a=3, b=3 /* offending write event */;
+*** slave must stop (Trying to insert an invalid foreign key)
+Last_SQL_Error
+1452
+select * from ti2 order by b /* must be (2,2) */;
+a	b
+2	2
+set foreign_key_checks= 0;
+insert into ti1 set b=3;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+select * from ti2 order by b /* must be (2,2),(3,3) */;
+a	b
+2	2
+3	3
+*** other errors
+*** conspiring query
+insert into ti1 set b=1;
+insert into ti1 set b=1 /* offending write event */;
+*** slave must stop (Trying to insert a dupliacte key)
+Last_SQL_Error
+1062
+set foreign_key_checks= 0;
+delete from ti1 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+CREATE TABLE t1 (a INT PRIMARY KEY);
+CREATE TABLE t2 (a INT);
+INSERT INTO t1 VALUES (-1),(-2),(-3);
+INSERT INTO t2 VALUES (-1),(-2),(-3);
+DELETE FROM t1 WHERE a = -2;
+DELETE FROM t2 WHERE a = -2;
+DELETE FROM t1 WHERE a = -2;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+DELETE FROM t2 WHERE a = -2;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+UPDATE t1 SET a = 1 WHERE a = -1;
+UPDATE t2 SET a = 1 WHERE a = -1;
+UPDATE t1 SET a = 1 WHERE a = -1;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+UPDATE t2 SET a = 1 WHERE a = -1;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+SET @@global.slave_exec_mode= @old_slave_exec_mode;
+drop table t1,t2,ti2,ti1;
+set @@global.slave_exec_mode= @old_slave_exec_mode;
+*** end of tests
diff --git a/mysql-test/suite/rpl/r/rpl_row_insert_delayed.result b/mysql-test/suite/rpl/r/rpl_row_insert_delayed.result
index 1551d83266d..c9cb2268da7 100644
--- a/mysql-test/suite/rpl/r/rpl_row_insert_delayed.result
+++ b/mysql-test/suite/rpl/r/rpl_row_insert_delayed.result
@@ -4,8 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set @old_global_binlog_format = @@global.binlog_format;
-set @@global.binlog_format = row;
 CREATE SCHEMA IF NOT EXISTS mysqlslap;
 USE mysqlslap;
 select @@global.binlog_format;
@@ -59,4 +57,3 @@ a
 1
 drop table t1;
 End of 5.0 tests
-set @@global.binlog_format = @old_global_binlog_format;
diff --git a/mysql-test/suite/rpl/r/rpl_stm_found_rows.result b/mysql-test/suite/rpl/r/rpl_stm_found_rows.result
new file mode 100644
index 00000000000..5252562acef
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_stm_found_rows.result
@@ -0,0 +1,110 @@
+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+==== Initialize ====
+**** On Master ****
+CREATE TABLE t1 (a INT);
+CREATE TABLE logtbl (sect INT, test INT, count INT);
+INSERT INTO t1 VALUES (1),(2),(3);
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+==== Simple test ====
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,1,@a);
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+a
+1
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,2,@a);
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+sect	test	count
+1	1	183
+1	2	3
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+sect	test	count
+1	1	183
+1	2	3
+==== Stored procedure ====
+**** On Master ****
+CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
+DECLARE cnt INT;
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO cnt;
+INSERT INTO logtbl VALUES(sect,test,cnt);
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO cnt;
+INSERT INTO logtbl VALUES(sect,test+1,cnt);
+END $$
+CALL calc_and_log(2,1);
+a
+1
+a
+7
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO logtbl VALUES( NAME_CONST('sect',2), NAME_CONST('test',1), NAME_CONST('cnt',3))
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO logtbl VALUES( NAME_CONST('sect',2), NAME_CONST('test',1)+1, NAME_CONST('cnt',183))
+CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
+INSERT INTO logtbl VALUES (sect,test,found_rows);
+END $$
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @found_rows;
+CALL just_log(2,3,@found_rows);
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+sect	test	count
+2	1	3
+2	2	183
+2	3	183
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+sect	test	count
+2	1	3
+2	2	183
+2	3	183
+==== Stored functions ====
+**** On Master ****
+CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
+RETURNS INT
+BEGIN
+INSERT INTO logtbl VALUES(sect,test,found_rows);
+RETURN found_rows;
+END $$
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @found_rows;
+SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
+log_rows(3,1,@found_rows)	log_rows(3,2,@found_rows)
+183	183
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+sect	test	count
+3	1	183
+3	2	183
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+sect	test	count
+3	1	183
+3	2	183
+==== Cleanup ====
+**** On Master ****
+DROP TABLE t1, logtbl;
+DROP PROCEDURE just_log;
+DROP PROCEDURE calc_and_log;
+DROP FUNCTION log_rows;
+**** Resetting master and slave ****
+include/stop_slave.inc
+RESET SLAVE;
+RESET MASTER;
+include/start_slave.inc
diff --git a/mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result b/mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result
index 5ca0ea2b780..3ed132dad61 100644
--- a/mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result
@@ -4,8 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set @old_global_binlog_format = @@global.binlog_format;
-set @@global.binlog_format = statement;
 CREATE SCHEMA IF NOT EXISTS mysqlslap;
 USE mysqlslap;
 select @@global.binlog_format;
@@ -71,70 +69,3 @@ drop table t1;
 FLUSH LOGS;
 FLUSH LOGS;
 End of 5.0 tests
-set @@global.binlog_format = mixed;
-CREATE SCHEMA IF NOT EXISTS mysqlslap;
-USE mysqlslap;
-select @@global.binlog_format;
-@@global.binlog_format
-MIXED
-CREATE TABLE t1 (id INT primary key auto_increment, name VARCHAR(64));
-FLUSH TABLE t1;
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-5000
-use mysqlslap;
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-5000
-truncate table t1;
-insert delayed into t1 values(10, "my name");
-insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
-flush table t1;
-select * from t1;
-id	name
-10	my name
-20	James Bond
-select * from t1;
-id	name
-10	my name
-20	James Bond
-delete from t1 where id!=10;
-insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
-flush table t1;
-select * from t1;
-id	name
-10	my name
-20	is Bond
-select * from t1;
-id	name
-10	my name
-20	is Bond
-USE test;
-DROP SCHEMA mysqlslap;
-use test;
-FLUSH LOGS;
-FLUSH LOGS;
-CREATE TABLE t1(a int, UNIQUE(a));
-INSERT DELAYED IGNORE INTO t1 VALUES(1);
-INSERT DELAYED IGNORE INTO t1 VALUES(1);
-flush table t1;
-show binlog events in 'master-bin.000002' LIMIT 2,2;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-select * from t1;
-a
-1
-On slave
-show binlog events in 'slave-bin.000002' LIMIT 2,2;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-select * from t1;
-a
-1
-drop table t1;
-FLUSH LOGS;
-FLUSH LOGS;
-End of 5.0 tests
-set @@global.binlog_format = @old_global_binlog_format;
diff --git a/mysql-test/suite/rpl/r/rpl_stm_loadfile.result b/mysql-test/suite/rpl/r/rpl_stm_loadfile.result
index ca76695f4d4..a2fc22d9951 100644
--- a/mysql-test/suite/rpl/r/rpl_stm_loadfile.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_loadfile.result
@@ -10,7 +10,7 @@ CREATE TABLE test.t1 (a INT, blob_column LONGBLOB, PRIMARY KEY(a));
 INSERT INTO test.t1  VALUES(1,'test');
 UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=1
 create procedure test.p1()
 begin
 INSERT INTO test.t1  VALUES(2,'test');
@@ -18,7 +18,8 @@ UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=2;
 end|
 CALL test.p1();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO test.t1  VALUES(2,'test')
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=2
 SELECT * FROM test.t1 ORDER BY blob_column;
 a	blob_column
 1	abase
diff --git a/mysql-test/suite/rpl/r/rpl_temporary_errors.result b/mysql-test/suite/rpl/r/rpl_temporary_errors.result
index d14380a6369..8f4868ea125 100644
--- a/mysql-test/suite/rpl/r/rpl_temporary_errors.result
+++ b/mysql-test/suite/rpl/r/rpl_temporary_errors.result
@@ -6,7 +6,6 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 call mtr.add_suppression("Deadlock found");
 **** On Master ****
-SET SESSION BINLOG_FORMAT=ROW;
 CREATE TABLE t1 (a INT PRIMARY KEY, b INT);
 INSERT INTO t1 VALUES (1,1), (2,2), (3,3), (4,4);
 **** On Slave ****
diff --git a/mysql-test/suite/rpl/r/rpl_udf.result b/mysql-test/suite/rpl/r/rpl_udf.result
index ccf16271d01..92ffb9cffc7 100644
--- a/mysql-test/suite/rpl/r/rpl_udf.result
+++ b/mysql-test/suite/rpl/r/rpl_udf.result
@@ -4,7 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set binlog_format=row;
 drop table if exists t1;
 "*** Test 1) Test UDFs via loadable libraries ***
 "Running on the master"
@@ -156,163 +155,3 @@ affected rows: 0
 "Running on the master"
 DROP TABLE t1;
 affected rows: 0
-set binlog_format=statement;
-drop table if exists t1;
-"*** Test 1) Test UDFs via loadable libraries ***
-"Running on the master"
-CREATE FUNCTION myfunc_double RETURNS REAL SONAME "UDF_EXAMPLE_LIB";
-affected rows: 0
-CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "UDF_EXAMPLE_LIB";
-affected rows: 0
-CREATE FUNCTION myfunc_nonexist RETURNS INTEGER SONAME "UDF_EXAMPLE_LIB";
-ERROR HY000: Can't find symbol 'myfunc_nonexist' in library
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-myfunc_double	1	UDF_LIB	function
-myfunc_int	2	UDF_LIB	function
-affected rows: 2
-"Running on the slave"
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-myfunc_double	1	UDF_LIB	function
-myfunc_int	2	UDF_LIB	function
-affected rows: 2
-"Running on the master"
-CREATE TABLE t1(sum INT, price FLOAT(24)) ENGINE=MyISAM;
-affected rows: 0
-INSERT INTO t1 VALUES(myfunc_int(100), myfunc_double(50.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(10), myfunc_double(5.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(200), myfunc_double(25.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(1), myfunc_double(500.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	48.5
-10	48.75
-100	48.6
-200	49
-affected rows: 4
-"Running on the slave"
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	48.5
-10	48.75
-100	48.6
-200	49
-affected rows: 4
-SELECT myfunc_int(25);
-myfunc_int(25)
-25
-affected rows: 1
-SELECT myfunc_double(75.00);
-myfunc_double(75.00)
-50.00
-affected rows: 1
-"Running on the master"
-DROP FUNCTION myfunc_double;
-affected rows: 0
-DROP FUNCTION myfunc_int;
-affected rows: 0
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-affected rows: 0
-"Running on the slave"
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-affected rows: 0
-"Running on the master"
-DROP TABLE t1;
-affected rows: 0
-"*** Test 2) Test UDFs with SQL body ***
-"Running on the master"
-CREATE FUNCTION myfuncsql_int(i INT) RETURNS INTEGER DETERMINISTIC RETURN i;
-affected rows: 0
-CREATE FUNCTION myfuncsql_double(d DOUBLE) RETURNS INTEGER DETERMINISTIC RETURN d * 2.00;
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	
-affected rows: 2
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	
-affected rows: 2
-"Running on the master"
-CREATE TABLE t1(sum INT, price FLOAT(24)) ENGINE=MyISAM;
-affected rows: 0
-INSERT INTO t1 VALUES(myfuncsql_int(100), myfuncsql_double(50.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(10), myfuncsql_double(5.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(200), myfuncsql_double(25.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(1), myfuncsql_double(500.00));
-affected rows: 1
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	1000
-10	10
-100	100
-200	50
-affected rows: 4
-"Running on the slave"
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	1000
-10	10
-100	100
-200	50
-affected rows: 4
-"Running on the master"
-ALTER FUNCTION myfuncsql_int COMMENT "This was altered.";
-affected rows: 0
-ALTER FUNCTION myfuncsql_double COMMENT "This was altered.";
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	This was altered.
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	This was altered.
-affected rows: 2
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	This was altered.
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	This was altered.
-affected rows: 2
-SELECT myfuncsql_int(25);
-myfuncsql_int(25)
-25
-affected rows: 1
-SELECT myfuncsql_double(75.00);
-myfuncsql_double(75.00)
-150
-affected rows: 1
-"Running on the master"
-DROP FUNCTION myfuncsql_double;
-affected rows: 0
-DROP FUNCTION myfuncsql_int;
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-affected rows: 0
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-affected rows: 0
-"Running on the master"
-DROP TABLE t1;
-affected rows: 0
diff --git a/mysql-test/suite/rpl/t/rpl_bug31076.test b/mysql-test/suite/rpl/t/rpl_bug31076.test
index 9176bafe022..8675f68c687 100644
--- a/mysql-test/suite/rpl/t/rpl_bug31076.test
+++ b/mysql-test/suite/rpl/t/rpl_bug31076.test
@@ -1,3 +1,4 @@
+source include/have_binlog_format_mixed_or_row.inc;
 source include/master-slave.inc;
 
 CREATE DATABASE track;
diff --git a/mysql-test/suite/rpl/t/rpl_events.test b/mysql-test/suite/rpl/t/rpl_events.test
index d06a3118389..19f07a7cbe7 100644
--- a/mysql-test/suite/rpl/t/rpl_events.test
+++ b/mysql-test/suite/rpl/t/rpl_events.test
@@ -1,11 +1,9 @@
 ##################################################################
 # Author: Giuseppe                                               #
 # Date: 2006-12-20                                               #
-# Purpose: To test that event effects are replicated             #
-# in both row based and statement based format                   #
+# Purpose: To test that event effects are replicated.            #
 ##################################################################
 
---source include/not_embedded.inc
 --source include/master-slave.inc
 
 SET @old_event_scheduler = @@global.event_scheduler;
@@ -13,14 +11,6 @@ set global event_scheduler=1;
 
 let $engine_type= MyISAM;
 
-set binlog_format=row;
-
-# Embedded server doesn't support binlogging
---source include/rpl_events.inc
-
-set binlog_format=statement;
-
-# Embedded server doesn't support binlogging
 --source include/rpl_events.inc
 
 #
diff --git a/mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test b/mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test
index 5255a9cfbad..29758366577 100644
--- a/mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test
+++ b/mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test
@@ -1,16 +1,9 @@
 #############################################################
 # Purpose: To test having extra columns on the master WL#3915
 #############################################################
+-- source include/have_binlog_format_row.inc
 -- source include/master-slave.inc
 -- source include/have_innodb.inc
 
 let $engine_type = 'InnoDB';
-
-set binlog_format=row;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=statement;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=mixed;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
+--source extra/rpl_tests/rpl_extraMaster_Col.test
diff --git a/mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test b/mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test
index e6b41eabd0d..31529a19cfc 100644
--- a/mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test
+++ b/mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test
@@ -1,15 +1,8 @@
 #############################################################
 # Purpose: To test having extra columns on the master WL#3915
 #############################################################
+-- source include/have_binlog_format_row.inc
 -- source include/master-slave.inc
 
 let $engine_type = 'MyISAM';
-
-set binlog_format=row;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=statement;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=mixed;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
+--source extra/rpl_tests/rpl_extraMaster_Col.test
diff --git a/mysql-test/suite/rpl/t/rpl_idempotency-slave.opt b/mysql-test/suite/rpl/t/rpl_idempotency-slave.opt
deleted file mode 100644
index 03fc19ca6ae..00000000000
--- a/mysql-test/suite/rpl/t/rpl_idempotency-slave.opt
+++ /dev/null
@@ -1 +0,0 @@
---slave-exec-mode=IDEMPOTENT
diff --git a/mysql-test/suite/rpl/t/rpl_idempotency.test b/mysql-test/suite/rpl/t/rpl_idempotency.test
index bfd1860759e..a837d366f71 100644
--- a/mysql-test/suite/rpl/t/rpl_idempotency.test
+++ b/mysql-test/suite/rpl/t/rpl_idempotency.test
@@ -2,17 +2,11 @@
 # work the same way under statement based as under row based.
 
 source include/master-slave.inc;
-connection master;
-source include/have_innodb.inc;
-connection slave;
-source include/have_innodb.inc;
 
 # Add suppression for expected warning(s) in slaves error log
 call mtr.add_suppression("Slave: Can\'t find record in \'t1\' Error_code: 1032");
 call mtr.add_suppression("Slave: Cannot add or update a child row: a foreign key constraint fails .* Error_code: 1452");
 
-SET @old_slave_exec_mode= @@global.slave_exec_mode;
-
 connection master;
 CREATE TABLE t1 (a INT PRIMARY KEY);
 CREATE TABLE t2 (a INT);
@@ -20,6 +14,9 @@ INSERT INTO t1 VALUES (-1),(-2),(-3);
 INSERT INTO t2 VALUES (-1),(-2),(-3);
 sync_slave_with_master;
 
+SET @old_slave_exec_mode= @@global.slave_exec_mode;
+SET @@global.slave_exec_mode= IDEMPOTENT;
+
 # A delete for a row that does not exist, the statement is
 # deliberately written to be idempotent for statement-based
 # replication as well. We test this towards both a table with a
@@ -57,6 +54,7 @@ disable_query_log;
 eval SELECT "$last_error" AS Last_SQL_Error;
 enable_query_log;
 
+
 # BUG#19958: RBR idempotency issue for UPDATE and DELETE
 
 # Statement-based and row-based replication have different behaviour
@@ -88,316 +86,4 @@ connection master;
 DROP TABLE t1, t2;
 sync_slave_with_master;
 
-# bug#31609 Not all RBR slave errors reported as errors
-# bug#31552 Replication breaks when deleting rows from out-of-sync table
-#           without PK
-
-#
-# Idempotent applying is not default any longer.
-# The default for slave-exec-mode option and server
-# variable slave_exec_mode  is 'STRICT'.
-# When 'STRICT' mode is set, the slave SQL thread will stop whenever
-# the row to change is not found. In 'IDEMPOTENT' mode, the SQL thread
-# will continue running and apply the row - replace if it's Write_rows event -
-# or skip to the next event.
-
-# the previous part of the tests was with IDEMPOTENT slave's mode.
-
-
-#
-# Other than above idempotent errors dealing with foreign keys constraint
-#
-
-select @@global.slave_exec_mode /* must be IDEMPOTENT */;
-
-connection master;
-
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-     engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-
-sync_slave_with_master;
-
-#connection slave;
-select * from ti1 order by b /* must be (1),(2),(3) */;
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-
-connection master;
-
-# from now on checking rbr specific idempotent errors
-set @save_binlog_format= @@session.binlog_format;
-set @@session.binlog_format= row;
-delete from ti1 where b=1;
-
-select * from ti1 order by b /* must be (2),(3) */;
-
-# slave must catch up (expect some warnings in error.log)
-sync_slave_with_master;
-
-#connection slave;
-select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
-
-delete from ti1 where b=3;
-
-connection master;
-insert into ti2 set a=3, b=3;
-
-# slave must catch up (expect some warnings in error.log)
-sync_slave_with_master;
-
-#connection slave;
-select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
-
-
-#
-# Checking the new global sys variable
-#
-
-connection slave;
-
-set global slave_exec_mode='IDEMPOTENT';
-set global slave_exec_mode='STRICT';
-
-# checking mutual exclusion for the options
---error ER_SLAVE_AMBIGOUS_EXEC_MODE
-set global slave_exec_mode='IDEMPOTENT,STRICT';
-
-select @@global.slave_exec_mode /* must be STRICT */;
-
-#
-# Checking stops.
-# In the following sections strict slave sql thread is going to
-# stop when faces an idempotent error. In order to proceed
-# the mode is temporarily switched to indempotent.
-#
-
-#
---echo *** foreign keys errors as above now forces to stop
-#
-
-connection master;
-
-set foreign_key_checks=0;
-drop table ti2, ti1;
-
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-     engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-
-sync_slave_with_master;
-
-#connection slave;
-select * from ti1 order by b /* must be (1),(2),(3) */;
---echo *** conspire future problem
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-
-connection master;
-
-delete from ti1 where b=1 /* offending delete event */;
-select * from ti1 order by b /* must be (2),(3) */;
-
-# foreign key: row is referenced
-
---echo *** slave must stop (Trying to delete a referenced foreing key)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
-set foreign_key_checks= 0;
-delete from ti2 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-connection master;
-
-sync_slave_with_master;
-
-#connection slave;
---echo *** conspire the following insert failure
-# foreign key: no referenced row
-
---echo *** conspire future problem
-delete from ti1 where b=3;
-
-connection master;
-insert into ti2 set a=3, b=3 /* offending write event */;
-
---echo *** slave must stop (Trying to insert an invalid foreign key)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-select * from ti2 order by b /* must be (2,2) */;
-set foreign_key_checks= 0;
-insert into ti1 set b=3;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-connection master;
-
-sync_slave_with_master;
-
-select * from ti2 order by b /* must be (2,2),(3,3) */;
-
-# 
---echo *** other errors
-# 
-
-# dup key insert
-
-#connection slave;
---echo *** conspiring query
-insert into ti1 set b=1;
-
-connection master;
-insert into ti1 set b=1 /* offending write event */;
-
---echo *** slave must stop (Trying to insert a dupliacte key)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-set foreign_key_checks= 0;
-delete from ti1 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-# key not found
-
-connection master;
-
-CREATE TABLE t1 (a INT PRIMARY KEY);
-CREATE TABLE t2 (a INT);
-INSERT INTO t1 VALUES (-1),(-2),(-3);
-INSERT INTO t2 VALUES (-1),(-2),(-3);
-sync_slave_with_master;
-
-#connection slave;
-DELETE FROM t1 WHERE a = -2;
-DELETE FROM t2 WHERE a = -2;
-connection master;
-DELETE FROM t1 WHERE a = -2;
-
---echo *** slave must stop (Key was not found)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-connection master;
-DELETE FROM t2 WHERE a = -2; 
---echo *** slave must stop (Key was not found)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-UPDATE t1 SET a = 1 WHERE a = -1;
-UPDATE t2 SET a = 1 WHERE a = -1;
-
-connection master;
-UPDATE t1 SET a = 1 WHERE a = -1;
-
---echo *** slave must stop (Key was not found)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
-set global slave_exec_mode='STRICT';
-
-
-connection master;
-UPDATE t2 SET a = 1 WHERE a = -1;
-
---echo *** slave must stop (Key was not found)
-connection slave;
-source include/wait_for_slave_sql_to_stop.inc;
-
-let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
-disable_query_log;
-eval SELECT "$last_error" AS Last_SQL_Error;
-enable_query_log;
-
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-connection master;
-sync_slave_with_master;
-#connection slave;
 SET @@global.slave_exec_mode= @old_slave_exec_mode;
-
-# cleanup for bug#31609 tests
-
-connection master;
-set @@session.binlog_format= @save_binlog_format;
-drop table t1,t2,ti2,ti1;
-
---source include/master-slave-end.inc
-
---echo *** end of tests
diff --git a/mysql-test/suite/rpl/t/rpl_found_rows.test b/mysql-test/suite/rpl/t/rpl_mix_found_rows.test
index ff8d2c3107a..30342126d24 100644
--- a/mysql-test/suite/rpl/t/rpl_found_rows.test
+++ b/mysql-test/suite/rpl/t/rpl_mix_found_rows.test
@@ -1,16 +1,7 @@
 source include/master-slave.inc;
+source include/have_binlog_format_mixed.inc;
 
-# It is not possible to replicate FOUND_ROWS() using statement-based
-# replication, but there is a workaround that stores the result of
-# FOUND_ROWS() into a user variable and then replicates this instead.
-
-# The purpose of this test case is to test that the workaround
-# function properly even when inside stored programs (i.e., stored
-# routines and triggers).
-
---echo ==== 0. Setting it all up ====
-
-SET BINLOG_FORMAT=STATEMENT;
+--echo ==== Initialize ====
 
 --echo **** On Master ****
 connection master;
@@ -25,106 +16,10 @@ INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 
---echo #### 1. Using statement mode ####
-
---echo ==== 1.1. Simple test ====
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-
-# Instead of
-#   INSERT INTO logtbl VALUES(1, 1, FOUND_ROWS());
-# we write
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,1,@a);
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-# Instead of
-#   INSERT INTO logtbl VALUES(1, 2, FOUND_ROWS());
-# we write
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,2,@a);
-
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-
---echo ==== 1.2. Stored procedure ====
-
-# Here we do both the calculation and the logging. We also do it twice
-# to make sure that there are no limitations on how many times it can
-# be used.
-
---echo **** On Master ****
-connection master;
---delimiter $$
-CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
-  DECLARE cnt INT;
-  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-  SELECT FOUND_ROWS() INTO cnt;
-  INSERT INTO logtbl VALUES(sect,test,cnt);
-  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-  SELECT FOUND_ROWS() INTO cnt;
-  INSERT INTO logtbl VALUES(sect,test+1,cnt);
-END $$
---delimiter ;
-
-CALL calc_and_log(2,1);
-
---delimiter $$
-CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
-  INSERT INTO logtbl VALUES (sect,test,found_rows);
-END $$
---delimiter ;
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO @found_rows;
-CALL just_log(2,3,@found_rows);
-
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-
---echo ==== 1.3. Stored functions ====
---echo **** On Master ****
-connection master;
---delimiter $$
-CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
-  RETURNS INT
-BEGIN
-  INSERT INTO logtbl VALUES(sect,test,found_rows);
-  RETURN found_rows;
-END $$
---delimiter ;
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO @found_rows;
-SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
-
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-
---echo ==== 1.9. Cleanup ====
---echo **** On Master ****
-connection master;
-DELETE FROM logtbl;
-DROP PROCEDURE just_log;
-DROP PROCEDURE calc_and_log;
-DROP FUNCTION log_rows;
-sync_slave_with_master;
-
-source include/reset_master_and_slave.inc;
-
---echo #### 2. Using mixed mode ####
-
---echo ==== 2.1. Checking a procedure ====
+--echo ==== Checking a procedure ====
 
 --echo **** On Master ****
 connection master;
-SET BINLOG_FORMAT=MIXED;
 
 # We will now check some stuff that will not work in statement-based
 # replication, but which should cause the binary log to switch to
@@ -139,7 +34,6 @@ sync_slave_with_master;
 
 --echo **** On Master 1 ****
 connection master1;
-SET BINLOG_FORMAT=MIXED;
 SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
 CALL just_log(1,1);
 
@@ -167,7 +61,7 @@ SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
 sync_slave_with_master;
 SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
 
---echo ==== 2.1. Checking a stored function ====
+--echo ==== Checking a stored function ====
 --echo **** On Master ****
 connection master;
 --delimiter $$
diff --git a/mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test b/mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test
new file mode 100644
index 00000000000..2c44829a649
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test
@@ -0,0 +1,5 @@
+--source include/have_binlog_format_mixed.inc
+--source include/master-slave.inc
+--source include/not_embedded.inc
+--source include/not_windows.inc
+--source extra/rpl_tests/rpl_insert_delayed.test
diff --git a/mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test b/mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test
index 8863c9d4ac7..1c489894c0f 100644
--- a/mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test
+++ b/mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test
@@ -1,15 +1,9 @@
--- source include/have_binlog_format_mixed_or_statement.inc
+-- source include/have_binlog_format_mixed.inc
 -- source include/not_ndb_default.inc
 -- source include/master-slave.inc
 
-# Test that the slave temporarily switches to ROW when seeing binrow
-# events when it is in STATEMENT or MIXED mode
-
-SET @old_binlog_format= @@global.binlog_format;
-
-SET BINLOG_FORMAT=MIXED;
-SET GLOBAL BINLOG_FORMAT=MIXED;
-SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
+# Test that the slave temporarily switches to ROW when seeing row
+# events when it is in MIXED mode
 
 --echo **** On Master ****
 CREATE TABLE t1 (a INT, b LONG);
@@ -35,7 +29,6 @@ SHOW BINLOG EVENTS;
 
 connection master;
 DROP TABLE IF EXISTS t1;
-SET @@global.binlog_format= @old_binlog_format;
 
 # Let's compare. Note: If they match test will pass, if they do not match
 # the test will show that the diff statement failed and not reject file
diff --git a/mysql-test/suite/rpl/t/rpl_row_idempotency.test b/mysql-test/suite/rpl/t/rpl_row_idempotency.test
new file mode 100644
index 00000000000..35e74b80e92
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_row_idempotency.test
@@ -0,0 +1,325 @@
+# Testing various forms of idempotency for replication.  This file is
+# for tests that should only be executed in row mode.
+
+source include/have_binlog_format_row.inc;
+source include/master-slave.inc;
+connection master;
+source include/have_innodb.inc;
+connection slave;
+source include/have_innodb.inc;
+
+# bug#31609 Not all RBR slave errors reported as errors
+# bug#31552 Replication breaks when deleting rows from out-of-sync table
+#           without PK
+
+# The default for slave-exec-mode option and server
+# variable slave_exec_mode  is 'STRICT'.
+# When 'STRICT' mode is set, the slave SQL thread will stop whenever
+# the row to change is not found. In 'IDEMPOTENT' mode, the SQL thread
+# will continue running and apply the row - replace if it's Write_rows event -
+# or skip to the next event.
+
+# the previous part of the tests was with IDEMPOTENT slave's mode.
+
+
+#
+# Other than above idempotent errors dealing with foreign keys constraint
+#
+connection slave;
+
+set @old_slave_exec_mode= @@global.slave_exec_mode;
+set @@global.slave_exec_mode= IDEMPOTENT;
+
+connection master;
+
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+     engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+
+sync_slave_with_master;
+
+#connection slave;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+
+connection master;
+
+# from now on checking rbr specific idempotent errors
+set @save_binlog_format= @@session.binlog_format;
+set @@session.binlog_format= row;
+delete from ti1 where b=1;
+
+select * from ti1 order by b /* must be (2),(3) */;
+
+# slave must catch up (expect some warnings in error.log)
+sync_slave_with_master;
+
+#connection slave;
+select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
+
+delete from ti1 where b=3;
+
+connection master;
+insert into ti2 set a=3, b=3;
+
+# slave must catch up (expect some warnings in error.log)
+sync_slave_with_master;
+
+#connection slave;
+select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
+
+
+#
+# Checking the new global sys variable
+#
+
+connection slave;
+
+set global slave_exec_mode='IDEMPOTENT';
+set global slave_exec_mode='STRICT';
+
+# checking mutual exclusion for the options
+--error ER_SLAVE_AMBIGOUS_EXEC_MODE
+set global slave_exec_mode='IDEMPOTENT,STRICT';
+
+select @@global.slave_exec_mode /* must be STRICT */;
+
+#
+# Checking stops.
+# In the following sections strict slave sql thread is going to
+# stop when faces an idempotent error. In order to proceed
+# the mode is temporarily switched to indempotent.
+#
+
+#
+--echo *** foreign keys errors as above now forces to stop
+#
+
+connection master;
+
+set foreign_key_checks=0;
+drop table ti2, ti1;
+
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+     engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+
+sync_slave_with_master;
+
+#connection slave;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+--echo *** conspire future problem
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+
+connection master;
+
+delete from ti1 where b=1 /* offending delete event */;
+select * from ti1 order by b /* must be (2),(3) */;
+
+# foreign key: row is referenced
+
+--echo *** slave must stop (Trying to delete a referenced foreing key)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
+set foreign_key_checks= 0;
+delete from ti2 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+connection master;
+
+sync_slave_with_master;
+
+#connection slave;
+--echo *** conspire the following insert failure
+# foreign key: no referenced row
+
+--echo *** conspire future problem
+delete from ti1 where b=3;
+
+connection master;
+insert into ti2 set a=3, b=3 /* offending write event */;
+
+--echo *** slave must stop (Trying to insert an invalid foreign key)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+select * from ti2 order by b /* must be (2,2) */;
+set foreign_key_checks= 0;
+insert into ti1 set b=3;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+connection master;
+
+sync_slave_with_master;
+
+select * from ti2 order by b /* must be (2,2),(3,3) */;
+
+# 
+--echo *** other errors
+# 
+
+# dup key insert
+
+#connection slave;
+--echo *** conspiring query
+insert into ti1 set b=1;
+
+connection master;
+insert into ti1 set b=1 /* offending write event */;
+
+--echo *** slave must stop (Trying to insert a dupliacte key)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+set foreign_key_checks= 0;
+delete from ti1 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+# key not found
+
+connection master;
+
+CREATE TABLE t1 (a INT PRIMARY KEY);
+CREATE TABLE t2 (a INT);
+INSERT INTO t1 VALUES (-1),(-2),(-3);
+INSERT INTO t2 VALUES (-1),(-2),(-3);
+sync_slave_with_master;
+
+#connection slave;
+DELETE FROM t1 WHERE a = -2;
+DELETE FROM t2 WHERE a = -2;
+connection master;
+DELETE FROM t1 WHERE a = -2;
+
+--echo *** slave must stop (Key was not found)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+connection master;
+DELETE FROM t2 WHERE a = -2; 
+--echo *** slave must stop (Key was not found)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+UPDATE t1 SET a = 1 WHERE a = -1;
+UPDATE t2 SET a = 1 WHERE a = -1;
+
+connection master;
+UPDATE t1 SET a = 1 WHERE a = -1;
+
+--echo *** slave must stop (Key was not found)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+set global slave_exec_mode='STRICT';
+
+
+connection master;
+UPDATE t2 SET a = 1 WHERE a = -1;
+
+--echo *** slave must stop (Key was not found)
+connection slave;
+source include/wait_for_slave_sql_to_stop.inc;
+
+let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Errno, 1);
+disable_query_log;
+eval SELECT "$last_error" AS Last_SQL_Error;
+enable_query_log;
+
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+connection master;
+sync_slave_with_master;
+#connection slave;
+SET @@global.slave_exec_mode= @old_slave_exec_mode;
+
+# cleanup for bug#31609 tests
+
+connection master;
+
+drop table t1,t2,ti2,ti1;
+sync_slave_with_master;
+set @@global.slave_exec_mode= @old_slave_exec_mode;
+
+--source include/master-slave-end.inc
+
+--echo *** end of tests
diff --git a/mysql-test/suite/rpl/t/rpl_row_insert_delayed.test b/mysql-test/suite/rpl/t/rpl_row_insert_delayed.test
index 9aeb57c4fa2..436c0a9f517 100644
--- a/mysql-test/suite/rpl/t/rpl_row_insert_delayed.test
+++ b/mysql-test/suite/rpl/t/rpl_row_insert_delayed.test
@@ -2,13 +2,4 @@
 --source include/master-slave.inc
 --source include/not_embedded.inc
 --source include/not_windows.inc
-
-connection master;
-set @old_global_binlog_format = @@global.binlog_format;
-
-let $binlog_format_statement=0;
-set @@global.binlog_format = row;
 --source extra/rpl_tests/rpl_insert_delayed.test
-
-connection master;
-set @@global.binlog_format = @old_global_binlog_format;
diff --git a/mysql-test/suite/rpl/t/rpl_slave_skip.test b/mysql-test/suite/rpl/t/rpl_slave_skip.test
index f4cb0f69e93..7416cc48c73 100644
--- a/mysql-test/suite/rpl/t/rpl_slave_skip.test
+++ b/mysql-test/suite/rpl/t/rpl_slave_skip.test
@@ -1,3 +1,9 @@
+# Every statement in this test is either executing under ROW or
+# STATEMENT format, which requires the slave thread to be able to apply
+# both statement and row events. Hence, we only need to execute this
+# test for MIXED mode.
+source include/have_binlog_format_mixed.inc;
+
 source include/master-slave.inc;
 source include/have_innodb.inc;
 
diff --git a/mysql-test/suite/rpl/t/rpl_stm_found_rows.test b/mysql-test/suite/rpl/t/rpl_stm_found_rows.test
new file mode 100644
index 00000000000..940d9f73d13
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_stm_found_rows.test
@@ -0,0 +1,121 @@
+source include/have_binlog_format_statement.inc;
+source include/master-slave.inc;
+
+# It is not possible to replicate FOUND_ROWS() using statement-based
+# replication, but there is a workaround that stores the result of
+# FOUND_ROWS() into a user variable and then replicates this instead.
+
+# The purpose of this test case is to test that the workaround
+# function properly even when inside stored programs (i.e., stored
+# routines and triggers).
+
+--echo ==== Initialize ====
+
+--echo **** On Master ****
+connection master;
+CREATE TABLE t1 (a INT);
+CREATE TABLE logtbl (sect INT, test INT, count INT);
+
+INSERT INTO t1 VALUES (1),(2),(3);
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+
+
+--echo ==== Simple test ====
+
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+
+# Instead of
+#   INSERT INTO logtbl VALUES(1, 1, FOUND_ROWS());
+# we write
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,1,@a);
+
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+# Instead of
+#   INSERT INTO logtbl VALUES(1, 2, FOUND_ROWS());
+# we write
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,2,@a);
+
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+--echo **** On Slave ****
+sync_slave_with_master;
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+
+
+--echo ==== Stored procedure ====
+
+# Here we do both the calculation and the logging. We also do it twice
+# to make sure that there are no limitations on how many times it can
+# be used.
+
+--echo **** On Master ****
+connection master;
+--delimiter $$
+CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
+  DECLARE cnt INT;
+  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+  SELECT FOUND_ROWS() INTO cnt;
+  INSERT INTO logtbl VALUES(sect,test,cnt);
+  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+  SELECT FOUND_ROWS() INTO cnt;
+  INSERT INTO logtbl VALUES(sect,test+1,cnt);
+END $$
+--delimiter ;
+
+CALL calc_and_log(2,1);
+
+--delimiter $$
+CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
+  INSERT INTO logtbl VALUES (sect,test,found_rows);
+END $$
+--delimiter ;
+
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO @found_rows;
+CALL just_log(2,3,@found_rows);
+
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+--echo **** On Slave ****
+sync_slave_with_master;
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+
+
+--echo ==== Stored functions ====
+--echo **** On Master ****
+connection master;
+--delimiter $$
+CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
+  RETURNS INT
+BEGIN
+  INSERT INTO logtbl VALUES(sect,test,found_rows);
+  RETURN found_rows;
+END $$
+--delimiter ;
+
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO @found_rows;
+SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
+
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+--echo **** On Slave ****
+sync_slave_with_master;
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+
+
+--echo ==== Cleanup ====
+--echo **** On Master ****
+connection master;
+DROP TABLE t1, logtbl;
+DROP PROCEDURE just_log;
+DROP PROCEDURE calc_and_log;
+DROP FUNCTION log_rows;
+sync_slave_with_master;
+
+source include/reset_master_and_slave.inc;
+
diff --git a/mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test b/mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test
index d55e3a4da2c..150b41ad020 100644
--- a/mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test
+++ b/mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test
@@ -1,20 +1,5 @@
-# we run first in statement-based then in mixed binlogging
-
---source include/have_binlog_format_mixed_or_statement.inc
+--source include/have_binlog_format_statement.inc
 --source include/master-slave.inc
 --source include/not_embedded.inc
 --source include/not_windows.inc
-
-connection master;
-set @old_global_binlog_format = @@global.binlog_format;
-
-let $binlog_format_statement=1;
-set @@global.binlog_format = statement;
 --source extra/rpl_tests/rpl_insert_delayed.test
-
-let $binlog_format_statement=0;
-set @@global.binlog_format = mixed;
---source extra/rpl_tests/rpl_insert_delayed.test
-
-connection master;
-set @@global.binlog_format = @old_global_binlog_format;
diff --git a/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test b/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test
index e6c1d5256a0..5795c697d71 100644
--- a/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test
+++ b/mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test
@@ -1,17 +1,25 @@
 #
 # rpl_switch_stm_row_mixed tests covers
 #
-#   - switching explicitly between STATEMENT, ROW, and MIXED binlog format
-#     showing when it is possible and when not. 
-#   - switching from MIXED to RBR implicitly listing all use cases,
-#     e.g a query invokes UUID(), thereafter to serve as the definition
-#     of MIXED binlog format
+#   - Master is switching explicitly between STATEMENT, ROW, and MIXED
+#     binlog format showing when it is possible and when not. 
+#   - Master switching from MIXED to RBR implicitly listing all use
+#     cases, e.g a query invokes UUID(), thereafter to serve as the
+#     definition of MIXED binlog format
 #   - correctness of execution
 
 
 -- source include/not_ndb_default.inc
 -- source include/master-slave.inc
 
+# Since this test generates row-based events in the binary log, the
+# slave SQL thread cannot be in STATEMENT mode to execute this test,
+# so we only execute it for MIXED and ROW as default value of
+# BINLOG_FORMAT.
+
+connection slave;
+-- source include/have_binlog_format_mixed_or_row.inc
+
 connection master;
 --disable_warnings
 drop database if exists mysqltest1;
diff --git a/mysql-test/suite/rpl/t/rpl_temporary_errors.test b/mysql-test/suite/rpl/t/rpl_temporary_errors.test
index 3b373e00a62..30fe54d0e72 100644
--- a/mysql-test/suite/rpl/t/rpl_temporary_errors.test
+++ b/mysql-test/suite/rpl/t/rpl_temporary_errors.test
@@ -1,10 +1,10 @@
+source include/have_binlog_format_row.inc;
 source include/master-slave.inc;
 
 call mtr.add_suppression("Deadlock found");
 
 --echo **** On Master ****
 connection master;
-SET SESSION BINLOG_FORMAT=ROW;
 CREATE TABLE t1 (a INT PRIMARY KEY, b INT);
 INSERT INTO t1 VALUES (1,1), (2,2), (3,3), (4,4);
 --echo **** On Slave ****
diff --git a/mysql-test/suite/rpl/t/rpl_udf.test b/mysql-test/suite/rpl/t/rpl_udf.test
index 262ad04630c..d982d53b600 100644
--- a/mysql-test/suite/rpl/t/rpl_udf.test
+++ b/mysql-test/suite/rpl/t/rpl_udf.test
@@ -5,18 +5,7 @@
 # statement based format. This tests work completed in WL#3629.   #
 ###################################################################
 
---source include/not_embedded.inc
 --source include/master-slave.inc
 
 let $engine_type= MyISAM;
-
-set binlog_format=row;
-
-# Embedded server doesn't support binlogging
---source include/rpl_udf.inc
-
-set binlog_format=statement;
-
-# Embedded server doesn't support binlogging
 --source include/rpl_udf.inc
-
diff --git a/mysql-test/suite/rpl_ndb/combinations b/mysql-test/suite/rpl_ndb/combinations
new file mode 100644
index 00000000000..07042c2cbec
--- /dev/null
+++ b/mysql-test/suite/rpl_ndb/combinations
@@ -0,0 +1,8 @@
+[row]
+binlog-format=row
+
+[stmt]
+binlog-format=statement
+
+[mix]
+binlog-format=mixed
diff --git a/mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result b/mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
new file mode 100644
index 00000000000..3a31ecd77ba
--- /dev/null
+++ b/mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
@@ -0,0 +1,116 @@
+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+==== Initialize ====
+[on slave]
+SET @old_binlog_format= @@global.binlog_format;
+INSTALL PLUGIN example SONAME 'ha_example.so';
+[on master]
+SET @old_binlog_format= @@global.binlog_format;
+INSTALL PLUGIN example SONAME 'ha_example.so';
+CREATE TABLE t (a VARCHAR(100)) ENGINE = MYISAM;
+CREATE TABLE t_self_logging (a VARCHAR(100)) ENGINE = NDB;
+CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
+CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
+CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
+SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
+[on slave]
+DROP TABLE t_slave_stmt;
+CREATE TABLE t_slave_stmt (a INT) ENGINE = EXAMPLE;
+[on master]
+==== Test ====
+---- binlog_format=row ----
+* Modify tables of more than one engine, one of which is self-logging
+CREATE TRIGGER trig_1 AFTER INSERT ON t_self_logging FOR EACH ROW BEGIN INSERT INTO t VALUES (1); END;
+INSERT INTO t_self_logging VALUES (1);
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
+DROP trigger trig_1;
+* Modify both row-only and stmt-only table
+CREATE TRIGGER trig_2 AFTER INSERT ON t_stmt FOR EACH ROW BEGIN INSERT INTO t_row VALUES(1); END;
+INSERT INTO t_stmt VALUES (1);
+ERROR HY000: Cannot execute statement: binlogging impossible since both row-incapable engines and statement-incapable engines are involved.
+DROP TRIGGER trig_2;
+* Stmt-only table and binlog_format=row
+INSERT INTO t_stmt VALUES (1);
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-logging.
+* Row injection and stmt-only table: in slave sql thread
+INSERT INTO t_slave_stmt VALUES (1);
+[on slave]
+--source include/wait_for_slave_sql_error_and_skip.inc
+Last_SQL_Error = Error 'Cannot execute row injection: binlogging impossible since at least one table uses a storage engine limited to statement-logging.' on opening tables
+set global sql_slave_skip_counter=1;
+include/start_slave.inc
+* Row injection and stmt-only table: use BINLOG statement
+BINLOG '
+1gRVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAADWBFVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
+';
+BINLOG '
+1gRVShMBAAAALwAAAEABAAAAABcAAAAAAAAABHRlc3QABnRfc3RtdAABDwJkAAE=
+1gRVShcBAAAAIAAAAGABAAAQABcAAAAAAAEAAf/+ATE=
+';
+ERROR HY000: Cannot execute row injection: binlogging impossible since at least one table uses a storage engine limited to statement-logging.
+---- binlog_format=mixed ----
+[on slave]
+include/stop_slave.inc
+SET @@global.binlog_format = MIXED;
+include/start_slave.inc
+[on master]
+SET @@global.binlog_format = MIXED;
+SET @@session.binlog_format = MIXED;
+* Unsafe statement and stmt-only engine
+INSERT INTO t_stmt VALUES (UUID());
+Warnings:
+Note	1639	Unsafe statement binlogged as statement since storage engine is limited to statement-logging. Statement: INSERT INTO t_stmt VALUES (UUID())
+---- binlog_format=statement ----
+[on slave]
+include/stop_slave.inc
+SET @@global.binlog_format = STATEMENT;
+include/start_slave.inc
+[on master]
+SET @@global.binlog_format = STATEMENT;
+SET @@session.binlog_format = STATEMENT;
+* Row-only engine and binlog_format=statement: innodb-specific message
+INSERT INTO t_row VALUES (1);
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+* Row-only engine and binlog_format=statement: generic message
+SET @@session.debug= "+d,no_innodb_binlog_errors";
+INSERT INTO t_row VALUES (1);
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging.
+* Row injection and binlog_format=statement: BINLOG statement
+BINLOG '
+b9pVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAABv2lVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
+';
+BINLOG '
+cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
+cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
+';
+ERROR HY000: Cannot execute row injection: binlogging impossible since BINLOG_FORMAT = STATEMENT.
+* Unsafe statement and binlog_format=statement
+INSERT INTO t VALUES (UUID());
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Statement: INSERT INTO t VALUES (UUID())
+---- master: binlog_format=mixed, slave: binlog_format=statement ----
+SET @@global.binlog_format = MIXED;
+SET @@session.binlog_format = MIXED;
+* Row injection and binlog_format=statement: in slave sql thread
+INSERT INTO t VALUES (UUID());
+[on slave]
+--source include/wait_for_slave_sql_error_and_skip.inc
+Last_SQL_Error = Error 'Cannot execute row injection: binlogging impossible since BINLOG_FORMAT = STATEMENT.' on opening tables
+set global sql_slave_skip_counter=1;
+include/start_slave.inc
+[on master]
+==== Clean up ====
+DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt;
+SET @@global.binlog_format = @old_binlog_format;
+SET @@session.binlog_format = @old_binlog_format;
+UNINSTALL PLUGIN example;
+[on slave]
+SET @@global.binlog_format = @old_binlog_format;
+SET @@session.binlog_format = @old_binlog_format;
+UNINSTALL PLUGIN example;
diff --git a/mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result b/mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
index 01f8d94da48..b6f32668c42 100644
--- a/mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
+++ b/mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
@@ -102,3 +102,4 @@ Last_IO_Errno	#
 Last_IO_Error	#
 Last_SQL_Errno	0
 Last_SQL_Error	
+DROP TABLE t1;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test
index 3b075808481..63534cf6613 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test
@@ -8,6 +8,9 @@
 # test and to have control over the tests.
 ##############################################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/master-slave.inc
 
 -- connection slave
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test
index 560efec255b..9ff4ca9eb73 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test
@@ -8,6 +8,9 @@
 # test and to have control over the tests.
 ##############################################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/master-slave.inc
 
 -- connection slave
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test
index 5903cd223ad..04ef7f31b7c 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test
@@ -1,4 +1,7 @@
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt
new file mode 100644
index 00000000000..ffa981152ea
--- /dev/null
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt
@@ -0,0 +1 @@
+--innodb $EXAMPLE_PLUGIN_OPT
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt
new file mode 100644
index 00000000000..ffa981152ea
--- /dev/null
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt
@@ -0,0 +1 @@
+--innodb $EXAMPLE_PLUGIN_OPT
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test
new file mode 100644
index 00000000000..1b157192b4f
--- /dev/null
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test
@@ -0,0 +1,193 @@
+# ==== Purpose ====
+#
+# Verify that errors or warnings are issued for all error conditions
+# related to deciding the binlog format of a statement.  The possible
+# errors are listed in a comment above decide_logging_format() in
+# sql_base.cc.
+#
+# ==== Method ====
+#
+# Each error condition is executed; we verify that there is an error.
+#
+# ==== Related bugs ====
+#
+# BUG#39934: Slave stops for engine that only support row-based logging
+# BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db
+#
+# ==== Related test cases ====
+#
+# binlog.binlog_unsafe verifies more thoroughly that a warning is
+# given for the case when an unsafe statement is executed and
+# binlog_format = STATEMENT.
+
+--source include/have_debug.inc
+# The test changes binlog_format, so there is no reason to run it
+# under more than one binlog format.
+--source include/have_binlog_format_row.inc
+--source include/have_ndb.inc
+--source include/have_innodb.inc
+--source include/ndb_master-slave.inc
+
+
+--echo ==== Initialize ====
+
+--echo [on slave]
+--connection slave
+
+SET @old_binlog_format= @@global.binlog_format;
+INSTALL PLUGIN example SONAME 'ha_example.so';
+
+--echo [on master]
+--connection master
+
+SET @old_binlog_format= @@global.binlog_format;
+INSTALL PLUGIN example SONAME 'ha_example.so';
+
+CREATE TABLE t (a VARCHAR(100)) ENGINE = MYISAM;
+CREATE TABLE t_self_logging (a VARCHAR(100)) ENGINE = NDB;
+CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
+CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
+CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
+# This makes the innodb table row-only
+SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
+
+--echo [on slave]
+--sync_slave_with_master
+
+DROP TABLE t_slave_stmt;
+CREATE TABLE t_slave_stmt (a INT) ENGINE = EXAMPLE;
+
+--echo [on master]
+--connection master
+
+
+--echo ==== Test ====
+
+--echo ---- binlog_format=row ----
+
+--echo * Modify tables of more than one engine, one of which is self-logging
+--eval CREATE TRIGGER trig_1 AFTER INSERT ON t_self_logging FOR EACH ROW BEGIN INSERT INTO t VALUES (1); END
+--error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
+INSERT INTO t_self_logging VALUES (1);
+DROP trigger trig_1;
+
+--echo * Modify both row-only and stmt-only table
+--eval CREATE TRIGGER trig_2 AFTER INSERT ON t_stmt FOR EACH ROW BEGIN INSERT INTO t_row VALUES(1); END
+--error ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE
+INSERT INTO t_stmt VALUES (1);
+DROP TRIGGER trig_2;
+
+--echo * Stmt-only table and binlog_format=row
+--error ER_BINLOG_ROW_MODE_AND_STMT_ENGINE
+INSERT INTO t_stmt VALUES (1);
+
+--echo * Row injection and stmt-only table: in slave sql thread
+INSERT INTO t_slave_stmt VALUES (1);
+--echo [on slave]
+--connection slave
+# 1640 = ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
+--let $slave_sql_errno= 1640
+--let $show_sql_error= 1
+--source include/wait_for_slave_sql_error_and_skip.inc
+
+--echo * Row injection and stmt-only table: use BINLOG statement
+# This is a format description event
+BINLOG '
+1gRVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAADWBFVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
+';
+# This is a Table_map_event and a Write_rows_event. Together, they are
+# equivalent to 'INSERT INTO t_stmt VALUES (1)'
+--error ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
+BINLOG '
+1gRVShMBAAAALwAAAEABAAAAABcAAAAAAAAABHRlc3QABnRfc3RtdAABDwJkAAE=
+1gRVShcBAAAAIAAAAGABAAAQABcAAAAAAAEAAf/+ATE=
+';
+
+
+--echo ---- binlog_format=mixed ----
+
+--echo [on slave]
+--sync_slave_with_master
+--source include/stop_slave.inc
+SET @@global.binlog_format = MIXED;
+--source include/start_slave.inc
+--echo [on master]
+--connection master
+SET @@global.binlog_format = MIXED;
+SET @@session.binlog_format = MIXED;
+
+--echo * Unsafe statement and stmt-only engine
+# This will give a warning.
+INSERT INTO t_stmt VALUES (UUID());
+
+
+--echo ---- binlog_format=statement ----
+
+--echo [on slave]
+--sync_slave_with_master
+--source include/stop_slave.inc
+SET @@global.binlog_format = STATEMENT;
+--source include/start_slave.inc
+--echo [on master]
+--connection master
+SET @@global.binlog_format = STATEMENT;
+SET @@session.binlog_format = STATEMENT;
+
+--echo * Row-only engine and binlog_format=statement: innodb-specific message
+--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
+INSERT INTO t_row VALUES (1);
+
+--echo * Row-only engine and binlog_format=statement: generic message
+SET @@session.debug= "+d,no_innodb_binlog_errors";
+--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
+INSERT INTO t_row VALUES (1);
+
+--echo * Row injection and binlog_format=statement: BINLOG statement
+# This is a format description event
+BINLOG '
+b9pVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAABv2lVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
+';
+# This is a Table_map_event and a Write_rows_event. Together, they are
+# equivalent to 'INSERT INTO t VALUES (1)'.
+--error ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
+BINLOG '
+cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
+cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
+';
+
+--echo * Unsafe statement and binlog_format=statement
+# This will give a warning.
+INSERT INTO t VALUES (UUID());
+
+
+--echo ---- master: binlog_format=mixed, slave: binlog_format=statement ----
+
+SET @@global.binlog_format = MIXED;
+SET @@session.binlog_format = MIXED;
+
+--echo * Row injection and binlog_format=statement: in slave sql thread
+INSERT INTO t VALUES (UUID());
+--echo [on slave]
+--connection slave
+# 1642 = ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
+--let $slave_sql_errno= 1642
+--let $show_sql_error= 1
+--source include/wait_for_slave_sql_error_and_skip.inc
+
+--echo [on master]
+--connection master
+
+
+--echo ==== Clean up ====
+
+DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt;
+SET @@global.binlog_format = @old_binlog_format;
+SET @@session.binlog_format = @old_binlog_format;
+UNINSTALL PLUGIN example;
+--echo [on slave]
+--sync_slave_with_master
+SET @@global.binlog_format = @old_binlog_format;
+SET @@session.binlog_format = @old_binlog_format;
+UNINSTALL PLUGIN example;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test
index 822f1f224cd..a79c62e2a10 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test
@@ -1,4 +1,7 @@
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 #
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test
index e29f24998fe..26946450e07 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test
@@ -3,6 +3,11 @@
 # Using wrapper to share test   #
 # code between engine tests     #
 #################################
+#
+# Since the master generates row-based events, the slave may not be in
+# STATEMENT mode to accept the events.
+#
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/have_ndb.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDBCLUSTER;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test
index 2cc46e2420e..d7456745b53 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test
@@ -1,4 +1,7 @@
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 # set up circular replication
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test
index d5ddfc2b739..c133c668887 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test
@@ -1,4 +1,7 @@
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 connection master;
@@ -78,3 +81,7 @@ SELECT * FROM t1 ORDER BY a;
 --replace_result $MASTER_MYPORT MASTER_PORT
 --replace_column 1 # 7 # 8 # 9 # 22 # 23 # 33 # 35 # 36 #
 query_vertical SHOW SLAVE STATUS;
+
+connection master;
+DROP TABLE t1;
+sync_slave_with_master;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test
index 8c45ac5dbdd..cf3eb9589d2 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test
@@ -4,6 +4,10 @@
 # Different engines                 #
 # By JBM 2004-02-15                 #
 #####################################
+
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/have_ndb.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test
index 8d5ad334766..cb99d049266 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test
@@ -1,5 +1,8 @@
 --source include/have_ucs2.inc
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 #
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test
index 6b1d932f9a6..c06d1a62fef 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test
@@ -3,6 +3,9 @@
 # Share test code between engine tests  #
 #########################################
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 -- source extra/rpl_tests/rpl_delete_no_where.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test
index ffe8551d00f..750ae377350 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test
@@ -6,6 +6,9 @@
 ##########################################################
 
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 --disable_warnings
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test
index ee6abd580f5..4598795cead 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test
@@ -6,6 +6,9 @@
 ##########################################################
 
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 --disable_warnings
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test
index c02d82e2dc9..5f0fd3dfe49 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test
@@ -7,6 +7,9 @@
 # reduce test case code           #
 ###################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 -- source extra/rpl_tests/rpl_row_func003.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test
index fcc2928c5e2..66531172894 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test
@@ -2,6 +2,9 @@
 
 -- source include/have_ndb.inc
 -- source include/have_innodb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 
 create table t1 (a int, unique(a)) engine=ndbcluster;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test
index e6c66011fb7..be6f71eb5b5 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test
@@ -2,6 +2,9 @@
 # Wrapper for rpl_insert_ignore.test#
 #####################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 let $engine_type2=myisam;
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test
index 14b76722fa6..13c2fbce2b4 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test
@@ -23,6 +23,9 @@
 
 
 source include/have_ndb.inc;
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+source include/have_binlog_format_mixed_or_row.inc;
 source include/ndb_master-slave.inc;
 source include/have_innodb.inc;
 
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test
index f144965e9b0..0375fd7fe6d 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test
@@ -3,6 +3,9 @@
 # to reuse test code between engine runs                   #
 ############################################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 -- source extra/rpl_tests/rpl_multi_update3.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test
index 1f305d20c92..2d0c87927a5 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test
@@ -7,6 +7,9 @@
 ##########################################################
 
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 --source include/ndb_master-slave.inc
 
 --disable_warnings
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test
index f5b05080131..c711e6ddfa3 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test
@@ -2,6 +2,9 @@
 # By JBM 2005-02-15 Wrapped to allow reuse of test code#
 ########################################################
 --source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+--source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 -- source extra/rpl_tests/rpl_row_001.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test
index 6453f45aa75..a8dab098df5 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test
@@ -5,6 +5,9 @@
 # For different engines         #
 #################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDBCLUSTER;
 -- source extra/rpl_tests/rpl_row_sp003.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test
index c2c7be6112c..f005d9cd67a 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test
@@ -5,6 +5,9 @@
 # For different engines         #
 #################################
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDBCLUSTER;
 -- source extra/rpl_tests/rpl_row_sp006.test
diff --git a/mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test b/mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test
index 7f7e08685bf..1fef32b7a65 100644
--- a/mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test
+++ b/mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test
@@ -8,6 +8,9 @@
 
 # Includes
 -- source include/have_ndb.inc
+# Since the master generates row-based events, the slave must be in
+# ROW or MIXED mode to accept the events.
+-- source include/have_binlog_format_mixed_or_row.inc
 -- source include/ndb_master-slave.inc
 let $engine_type=NDB;
 -- source extra/rpl_tests/rpl_trig004.test