Merge bk-internal.mysql.com:/data0/bk/mysql-5.1-new

into  bk-internal.mysql.com:/data0/bk/mysql-5.1-kt

7 files changed, 26 insertions, 1073 deletions

diff --git a/mysql-test/r/ctype_sjis.result b/mysql-test/r/ctype_sjis.result
index eaea2e7479a..1c9d540d574 100644
--- a/mysql-test/r/ctype_sjis.result
+++ b/mysql-test/r/ctype_sjis.result
@@ -172,6 +172,6 @@ c2h
 ab_def
 drop table t1;
 SET NAMES sjis;
-SELECT HEX('�����@\�\') FROM DUAL;
-HEX('�����@�_�\')
+SELECT HEX('�����@�\') FROM DUAL;
+HEX('�����@�\')
 8DB2939181408C5C
diff --git a/mysql-test/r/rpl_ndb_dd_partitions.result b/mysql-test/r/rpl_ndb_dd_partitions.result
deleted file mode 100644
index ece6b84c227..00000000000
--- a/mysql-test/r/rpl_ndb_dd_partitions.result
+++ /dev/null
@@ -1,726 +0,0 @@
-stop slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-reset master;
-reset slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
---- Doing pre test cleanup --- 
-DROP TABLE IF EXISTS t1;
-CREATE LOGFILE GROUP lg1
-ADD UNDOFILE 'undofile.dat'
-INITIAL_SIZE 16M
-UNDO_BUFFER_SIZE = 1M
-ENGINE=NDB;
-ALTER LOGFILE GROUP lg1
-ADD UNDOFILE 'undofile02.dat'
-INITIAL_SIZE = 4M
-ENGINE=NDB;
-CREATE TABLESPACE ts1
-ADD DATAFILE 'datafile.dat'
-USE LOGFILE GROUP lg1
-INITIAL_SIZE 12M
-ENGINE NDB;
-ALTER TABLESPACE ts1
-ADD DATAFILE 'datafile02.dat'
-INITIAL_SIZE = 4M
-ENGINE=NDB;
---- Start test 2 partition RANGE testing --
---- Do setup --
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-y YEAR, t DATE)
-TABLESPACE ts1 STORAGE DISK
-ENGINE=NDB
-PARTITION BY RANGE (YEAR(t)) 
-(PARTITION p0 VALUES LESS THAN (1901), 
-PARTITION p1 VALUES LESS THAN (1946),  
-PARTITION p2 VALUES LESS THAN (1966), 
-PARTITION p3 VALUES LESS THAN (1986), 
-PARTITION p4 VALUES LESS THAN (2005), 
-PARTITION p5 VALUES LESS THAN MAXVALUE);
---- Show table on master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY RANGE (YEAR(t)) (PARTITION p0 VALUES LESS THAN (1901) ENGINE = ndbcluster, PARTITION p1 VALUES LESS THAN (1946) ENGINE = ndbcluster, PARTITION p2 VALUES LESS THAN (1966) ENGINE = ndbcluster, PARTITION p3 VALUES LESS THAN (1986) ENGINE = ndbcluster, PARTITION p4 VALUES LESS THAN (2005) ENGINE = ndbcluster, PARTITION p5 VALUES LESS THAN MAXVALUE ENGINE = ndbcluster)
---- Show table on slave --
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY RANGE (YEAR(t)) (PARTITION p0 VALUES LESS THAN (1901) ENGINE = ndbcluster, PARTITION p1 VALUES LESS THAN (1946) ENGINE = ndbcluster, PARTITION p2 VALUES LESS THAN (1966) ENGINE = ndbcluster, PARTITION p3 VALUES LESS THAN (1986) ENGINE = ndbcluster, PARTITION p4 VALUES LESS THAN (2005) ENGINE = ndbcluster, PARTITION p5 VALUES LESS THAN MAXVALUE ENGINE = ndbcluster)
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- Check that simple Alter statements are replicated correctly ---
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
---- Show the new improved table on the master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY RANGE (YEAR(t)) (PARTITION p0 VALUES LESS THAN (1901) ENGINE = ndbcluster, PARTITION p1 VALUES LESS THAN (1946) ENGINE = ndbcluster, PARTITION p2 VALUES LESS THAN (1966) ENGINE = ndbcluster, PARTITION p3 VALUES LESS THAN (1986) ENGINE = ndbcluster, PARTITION p4 VALUES LESS THAN (2005) ENGINE = ndbcluster, PARTITION p5 VALUES LESS THAN MAXVALUE ENGINE = ndbcluster)
---- Make sure that our tables on slave are still same engine ---
---- and that the alter statements replicated correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY RANGE (YEAR(t)) (PARTITION p0 VALUES LESS THAN (1901) ENGINE = ndbcluster, PARTITION p1 VALUES LESS THAN (1946) ENGINE = ndbcluster, PARTITION p2 VALUES LESS THAN (1966) ENGINE = ndbcluster, PARTITION p3 VALUES LESS THAN (1986) ENGINE = ndbcluster, PARTITION p4 VALUES LESS THAN (2005) ENGINE = ndbcluster, PARTITION p5 VALUES LESS THAN MAXVALUE ENGINE = ndbcluster)
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- End test 2 partition RANGE testing ---
---- Do Cleanup ---
-DROP TABLE IF EXISTS t1;
---- Start test 3 partition LIST testing ---
---- Do setup ---
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-y YEAR, t DATE)
-TABLESPACE ts1 STORAGE DISK
-ENGINE=NDB
-PARTITION BY LIST(id) 
-(PARTITION p0 VALUES IN (2, 4), 
-PARTITION p1 VALUES IN (42, 142));
---- Test 3 Alter to add partition ---
-ALTER TABLE t1 ADD PARTITION (PARTITION p2 VALUES IN (412));
---- Show table on master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY LIST (id) (PARTITION p0 VALUES IN (2,4) ENGINE = ndbcluster, PARTITION p1 VALUES IN (42,142) ENGINE = ndbcluster, PARTITION p2 VALUES IN (412) ENGINE = ndbcluster)
---- Show table on slave ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY LIST (id) (PARTITION p0 VALUES IN (2,4) ENGINE = ndbcluster, PARTITION p1 VALUES IN (42,142) ENGINE = ndbcluster, PARTITION p2 VALUES IN (412) ENGINE = ndbcluster)
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- Check that simple Alter statements are replicated correctly ---
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
---- Show the new improved table on the master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY LIST (id) (PARTITION p0 VALUES IN (2,4) ENGINE = ndbcluster, PARTITION p1 VALUES IN (42,142) ENGINE = ndbcluster, PARTITION p2 VALUES IN (412) ENGINE = ndbcluster)
---- Make sure that our tables on slave are still same engine ---
---- and that the alter statements replicated correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY LIST (id) (PARTITION p0 VALUES IN (2,4) ENGINE = ndbcluster, PARTITION p1 VALUES IN (42,142) ENGINE = ndbcluster, PARTITION p2 VALUES IN (412) ENGINE = ndbcluster)
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- End test 3 partition LIST testing ---
---- Do Cleanup --
-DROP TABLE IF EXISTS t1;
---- Start test 4 partition HASH testing ---
---- Do setup ---
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-y YEAR, t DATE)
-TABLESPACE ts1 STORAGE DISK
-ENGINE=NDB
-PARTITION BY HASH( YEAR(t) ) 
-PARTITIONS 4;
---- show that tables have been created correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY HASH ( YEAR(t)) PARTITIONS 4 
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY HASH ( YEAR(t)) PARTITIONS 4 
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- Check that simple Alter statements are replicated correctly ---
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
---- Show the new improved table on the master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY HASH ( YEAR(t)) PARTITIONS 4 
---- Make sure that our tables on slave are still same engine ---
---- and that the alter statements replicated correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY HASH ( YEAR(t)) PARTITIONS 4 
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- End test 4 partition HASH testing ---
---- Do Cleanup --
-DROP TABLE IF EXISTS t1;
---- Start test 5 partition by key testing ---
---- Create Table Section ---
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-y YEAR, t DATE,PRIMARY KEY(id))
-TABLESPACE ts1 STORAGE DISK
-ENGINE=NDB
-PARTITION BY KEY() 
-PARTITIONS 4;
---- Show that tables on master are ndbcluster tables ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`)
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Show that tables on slave ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned DEFAULT NULL,
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`)
-) TABLESPACE ts1 STORAGE DISK ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- Check that simple Alter statements are replicated correctly ---
-ALTER TABLE t1 DROP PRIMARY KEY, ADD PRIMARY KEY(id, total);
---- Show the new improved table on the master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned NOT NULL DEFAULT '0',
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`,`total`)
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Make sure that our tables on slave are still right type ---
---- and that the alter statements replicated correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(63) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned NOT NULL DEFAULT '0',
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`,`total`)
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- Check that simple Alter statements are replicated correctly ---
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
---- Show the new improved table on the master ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned NOT NULL DEFAULT '0',
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`,`total`)
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Make sure that our tables on slave are still same engine ---
---- and that the alter statements replicated correctly ---
-SHOW CREATE TABLE t1;
-Table	Create Table
-t1	CREATE TABLE `t1` (
-  `id` mediumint(9) NOT NULL,
-  `b1` bit(8) DEFAULT NULL,
-  `vc` varchar(255) DEFAULT NULL,
-  `bc` char(63) DEFAULT NULL,
-  `d` decimal(10,4) DEFAULT '0.0000',
-  `f` float DEFAULT '0',
-  `total` bigint(20) unsigned NOT NULL DEFAULT '0',
-  `y` year(4) DEFAULT NULL,
-  `t` date DEFAULT NULL,
-  PRIMARY KEY (`id`,`total`)
-) ENGINE=ndbcluster DEFAULT CHARSET=latin1 PARTITION BY KEY () PARTITIONS 4 
---- Perform basic operation on master ---
---- and ensure replicated correctly ---
-"--- Insert into t1 --" as "";
---- Select from t1 on master --- 
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Select from t1 on slave ---
-select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
-id	hex(b1)	vc	bc	d	f	total	y	t
-2	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1965-11-14
-4	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1985-11-14
-42	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1905-11-14
-142	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	1995-11-14
-412	1	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2005-11-14
---- Update t1 on master --
-UPDATE t1 SET b1 = 0, t="2006-02-22" WHERE id = 412;
---- Check the update on master --- 
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Check Update on slave ---
-SELECT id,hex(b1),vc,bc,d,f,total,y,t FROM t1 WHERE id = 412;
-id	hex(b1)	vc	bc	d	f	total	y	t
-412	0	Testing MySQL databases is a cool 	Must make it bug free for the customer	654321.4321	15.21	0	1965	2006-02-22
---- Remove a record from t1 on master ---
-DELETE FROM t1 WHERE id = 42;
---- Show current count on master for t1 ---
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
---- Show current count on slave for t1 --- 
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-4
-DELETE FROM t1;
---- End test 5 key partition testing ---
---- Do Cleanup ---
-DROP TABLE IF EXISTS t1;
-alter tablespace ts1
-drop datafile 'datafile.dat'
-engine=ndb;
-alter tablespace ts1
-drop datafile 'datafile02.dat'
-engine=ndb;
-DROP TABLESPACE ts1 ENGINE=NDB;
-DROP LOGFILE GROUP lg1 ENGINE=NDB;
diff --git a/mysql-test/t/ctype_sjis.test b/mysql-test/t/ctype_sjis.test
index 1d807b5e9a8..01e0b334554 100644
--- a/mysql-test/t/ctype_sjis.test
+++ b/mysql-test/t/ctype_sjis.test
@@ -78,6 +78,6 @@ SET collation_connection='sjis_bin';
 
 --character_set sjis
 SET NAMES sjis;
-SELECT HEX('�����@\�\') FROM DUAL;
+SELECT HEX('�����@�\') FROM DUAL;
 
 # End of 4.1 tests
diff --git a/mysql-test/t/rpl_ndb_dd_partitions.test b/mysql-test/t/rpl_ndb_dd_partitions.test
deleted file mode 100644
index 9291f38e8db..00000000000
--- a/mysql-test/t/rpl_ndb_dd_partitions.test
+++ /dev/null
@@ -1,310 +0,0 @@
-#######################################
-# Author: JBM                         #
-# Date: 2006-03-09                    #
-# Purpose: To test the replication of #
-# Cluster Disk Data using partitions  #
-#######################################
-
---source include/have_ndb.inc
---source include/have_binlog_format_row.inc
---source include/master-slave.inc
-
---echo --- Doing pre test cleanup --- 
-
-connection master;
---disable_warnings
-DROP TABLE IF EXISTS t1;
---enable_query_log
-
-
-# Start by creating a logfile group
-##################################
-
-CREATE LOGFILE GROUP lg1
-ADD UNDOFILE 'undofile.dat'
-INITIAL_SIZE 16M
-UNDO_BUFFER_SIZE = 1M
-ENGINE=NDB;
-
-ALTER LOGFILE GROUP lg1
-ADD UNDOFILE 'undofile02.dat'
-INITIAL_SIZE = 4M
-ENGINE=NDB;
-
-###################################################
-# Create a tablespace connected to the logfile group
-###################################################
-
-CREATE TABLESPACE ts1
-ADD DATAFILE 'datafile.dat'
-USE LOGFILE GROUP lg1
-INITIAL_SIZE 12M
-ENGINE NDB;
-
-ALTER TABLESPACE ts1
-ADD DATAFILE 'datafile02.dat'
-INITIAL_SIZE = 4M
-ENGINE=NDB;
-
-#################################################################
-
---echo --- Start test 2 partition RANGE testing --
---echo --- Do setup --
-
-
-#################################################
-# Requirment: Create table that is partitioned  #
-# by range on year i.e. year(t) and replicate   #
-# basice operations such at insert, update      #
-# delete between 2 different storage engines    #
-# Alter table and ensure table is handled       #
-# Correctly on the slave                        #
-#################################################
-
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-                 bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-                 f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-                 y YEAR, t DATE)
-                 TABLESPACE ts1 STORAGE DISK
-                 ENGINE=NDB
-                 PARTITION BY RANGE (YEAR(t)) 
-                (PARTITION p0 VALUES LESS THAN (1901), 
-                 PARTITION p1 VALUES LESS THAN (1946),  
-                 PARTITION p2 VALUES LESS THAN (1966), 
-                 PARTITION p3 VALUES LESS THAN (1986), 
-                 PARTITION p4 VALUES LESS THAN (2005), 
-                 PARTITION p5 VALUES LESS THAN MAXVALUE);
-
---echo --- Show table on master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Show table on slave --
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- Check that simple Alter statements are replicated correctly ---
-
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
-
---echo --- Show the new improved table on the master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Make sure that our tables on slave are still same engine ---
---echo --- and that the alter statements replicated correctly ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
---enable_query_log
-
---source include/rpl_multi_engine3.inc
-
---echo --- End test 2 partition RANGE testing ---
---echo --- Do Cleanup ---
-
-DROP TABLE IF EXISTS t1;
-
-########################################################
-
---echo --- Start test 3 partition LIST testing ---
---echo --- Do setup ---
-#################################################
-
-
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-                 bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-                 f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-                 y YEAR, t DATE)
-                 TABLESPACE ts1 STORAGE DISK
-                 ENGINE=NDB
-                 PARTITION BY LIST(id) 
-                (PARTITION p0 VALUES IN (2, 4), 
-                 PARTITION p1 VALUES IN (42, 142));
-
---echo --- Test 3 Alter to add partition ---
-
-ALTER TABLE t1 ADD PARTITION (PARTITION p2 VALUES IN (412));
-
---echo --- Show table on master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Show table on slave ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- Check that simple Alter statements are replicated correctly ---
-
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
-
---echo --- Show the new improved table on the master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Make sure that our tables on slave are still same engine ---
---echo --- and that the alter statements replicated correctly ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- End test 3 partition LIST testing ---
---echo --- Do Cleanup --
-
-DROP TABLE IF EXISTS t1;
-
-########################################################
-
---echo --- Start test 4 partition HASH testing ---
---echo --- Do setup ---
-#################################################
-
-
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-                 bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-                 f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-                 y YEAR, t DATE)
-                 TABLESPACE ts1 STORAGE DISK
-                 ENGINE=NDB
-                 PARTITION BY HASH( YEAR(t) ) 
-                 PARTITIONS 4; 
-
---echo --- show that tables have been created correctly ---
-
-SHOW CREATE TABLE t1;
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- Check that simple Alter statements are replicated correctly ---
-
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
-
---echo --- Show the new improved table on the master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Make sure that our tables on slave are still same engine ---
---echo --- and that the alter statements replicated correctly ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- End test 4 partition HASH testing ---
---echo --- Do Cleanup --
-
-DROP TABLE IF EXISTS t1;
-
-########################################################
-
---echo --- Start test 5 partition by key testing ---
---echo --- Create Table Section ---
-
-#################################################
-
-CREATE TABLE t1 (id MEDIUMINT NOT NULL, b1 BIT(8), vc VARCHAR(63), 
-                 bc CHAR(63), d DECIMAL(10,4) DEFAULT 0, 
-                 f FLOAT DEFAULT 0, total BIGINT UNSIGNED, 
-                 y YEAR, t DATE,PRIMARY KEY(id))
-                 TABLESPACE ts1 STORAGE DISK
-                 ENGINE=NDB
-                 PARTITION BY KEY() 
-                 PARTITIONS 4;
-
---echo --- Show that tables on master are ndbcluster tables ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Show that tables on slave ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
-# Okay lets see how it holds up to table changes
---echo --- Check that simple Alter statements are replicated correctly ---
-
-ALTER TABLE t1 DROP PRIMARY KEY, ADD PRIMARY KEY(id, total);
-
---echo --- Show the new improved table on the master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Make sure that our tables on slave are still right type ---
---echo --- and that the alter statements replicated correctly ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- Check that simple Alter statements are replicated correctly ---
-
-ALTER TABLE t1 MODIFY vc VARCHAR(255);
-
---echo --- Show the new improved table on the master ---
-
-SHOW CREATE TABLE t1;
-
---echo --- Make sure that our tables on slave are still same engine ---
---echo --- and that the alter statements replicated correctly ---
-
-sync_slave_with_master;
-SHOW CREATE TABLE t1;
-
---echo --- Perform basic operation on master ---
---echo --- and ensure replicated correctly ---
-
---source include/rpl_multi_engine3.inc
-
---echo --- End test 5 key partition testing ---
---echo --- Do Cleanup ---
-
-DROP TABLE IF EXISTS t1;
-alter tablespace ts1
-drop datafile 'datafile.dat'
-engine=ndb;
-alter tablespace ts1
-drop datafile 'datafile02.dat'
-engine=ndb;
-DROP TABLESPACE ts1 ENGINE=NDB;
-DROP LOGFILE GROUP lg1 ENGINE=NDB;
---sync_slave_with_master
-
-# End of 5.1 test case
diff --git a/sql/ha_ndbcluster.cc b/sql/ha_ndbcluster.cc
index 3239c154478..3425c638005 100644
--- a/sql/ha_ndbcluster.cc
+++ b/sql/ha_ndbcluster.cc
@@ -3546,14 +3546,17 @@ void ha_ndbcluster::info(uint flag)
       Ndb *ndb= get_ndb();
       Ndb_tuple_id_range_guard g(m_share);
       
+      Uint64 auto_increment_value64;
       if (ndb->readAutoIncrementValue(m_table, g.range,
-                                      auto_increment_value) == -1)
+                                      auto_increment_value64) == -1)
       {
         const NdbError err= ndb->getNdbError();
         sql_print_error("Error %lu in readAutoIncrementValue(): %s",
                         (ulong) err.code, err.message);
         auto_increment_value= ~(Uint64)0;
       }
+      else
+        auto_increment_value= (ulonglong)auto_increment_value64;
     }
   }
   DBUG_VOID_RETURN;
diff --git a/sql/sql_lex.cc b/sql/sql_lex.cc
index 562224201e7..02711ed8f48 100644
--- a/sql/sql_lex.cc
+++ b/sql/sql_lex.cc
@@ -319,18 +319,7 @@ static char *get_text(LEX *lex)
       found_escape=1;
       if (lex->ptr == lex->end_of_query)
 	return 0;
-#ifdef USE_MB
-      int l;
-      if (use_mb(cs) &&
-          (l = my_ismbchar(cs,
-                           (const char *)lex->ptr,
-                           (const char *)lex->end_of_query))) {
-          lex->ptr += l;
-          continue;
-      }
-      else
-#endif
-        yySkip();
+      yySkip();
     }
     else if (c == sep)
     {
@@ -360,9 +349,6 @@ static char *get_text(LEX *lex)
       {
 	uchar *to;
 
-        /* Re-use found_escape for tracking state of escapes */
-        found_escape= 0;
-
 	for (to=start ; str != end ; str++)
 	{
 #ifdef USE_MB
@@ -376,8 +362,7 @@ static char *get_text(LEX *lex)
 	      continue;
 	  }
 #endif
-	  if (!found_escape &&
-              !(lex->thd->variables.sql_mode & MODE_NO_BACKSLASH_ESCAPES) &&
+	  if (!(lex->thd->variables.sql_mode & MODE_NO_BACKSLASH_ESCAPES) &&
               *str == '\\' && str+1 != end)
 	  {
 	    switch(*++str) {
@@ -404,20 +389,14 @@ static char *get_text(LEX *lex)
 	      *to++= '\\';		// remember prefix for wildcard
 	      /* Fall through */
 	    default:
-              found_escape= 1;
-              str--;
+              *to++= *str;
 	      break;
 	    }
 	  }
-	  else if (!found_escape && *str == sep)
-          {
-            found_escape= 1;
-          }
+	  else if (*str == sep)
+	    *to++= *str++;		// Two ' or "
 	  else
-          {
 	    *to++ = *str;
-            found_escape= 0;
-          }
 	}
 	*to=0;
 	lex->yytoklen=(uint) (to-start);
diff --git a/tests/mysql_client_test.c b/tests/mysql_client_test.c
index d927b27ab37..e3159cfa5e5 100644
--- a/tests/mysql_client_test.c
+++ b/tests/mysql_client_test.c
@@ -12794,25 +12794,26 @@ from t2);");
 static void test_bug8378()
 {
 #if defined(HAVE_CHARSET_gbk) && !defined(EMBEDDED_LIBRARY)
-  MYSQL *lmysql;
+  MYSQL *old_mysql=mysql;
   char out[9]; /* strlen(TEST_BUG8378)*2+1 */
-  int len;
+  char buf[256];
+  int len, rc;
 
   myheader("test_bug8378");
 
   if (!opt_silent)
     fprintf(stdout, "\n Establishing a test connection ...");
-  if (!(lmysql= mysql_init(NULL)))
+  if (!(mysql= mysql_init(NULL)))
   {
     myerror("mysql_init() failed");
     exit(1);
   }
-  if (mysql_options(lmysql, MYSQL_SET_CHARSET_NAME, "gbk"))
+  if (mysql_options(mysql, MYSQL_SET_CHARSET_NAME, "gbk"))
   {
     myerror("mysql_options() failed");
     exit(1);
   }
-  if (!(mysql_real_connect(lmysql, opt_host, opt_user,
+  if (!(mysql_real_connect(mysql, opt_host, opt_user,
                            opt_password, current_db, opt_port,
                            opt_unix_socket, 0)))
   {
@@ -12822,12 +12823,18 @@ static void test_bug8378()
   if (!opt_silent)
     fprintf(stdout, " OK");
 
-  len= mysql_real_escape_string(lmysql, out, TEST_BUG8378_IN, 4);
+  len= mysql_real_escape_string(mysql, out, TEST_BUG8378_IN, 4);
 
   /* No escaping should have actually happened. */
   DIE_UNLESS(memcmp(out, TEST_BUG8378_OUT, len) == 0);
 
-  mysql_close(lmysql);
+  sprintf(buf, "SELECT '%s'", out);
+  rc=mysql_real_query(mysql, buf, strlen(buf));
+  myquery(rc);
+
+  mysql_close(mysql);
+
+  mysql=old_mysql;
 #endif
 }