summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_irq.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915/psr: split out PSR regs to a separate fileJani Nikula2023-04-041-0/+1
| | | | | | | | | | Clean up i915_reg.h by splitting out PSR regs to display/intel_psr_regs.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-2-jani.nikula@intel.com
* drm/i915/fdi: split out FDI regs to a separate fileJani Nikula2023-03-301-0/+1
| | | | | | | | | Clean up i915_reg.h by splitting out FDI regs to display/intel_fdi_regs.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bba37e46d767e2193d49d1d2e289040c6bf8229b.1678973282.git.jani.nikula@intel.com
* drm/i915: Fix SKL DDI A digital port .connected()Ville Syrjälä2023-03-071-0/+2
| | | | | | | | | | | | | | SKL doesn't have any north DE hotplug stuff. Currently we're trying to read DDI A live state from the BDW north DE bit, instead of the approproate south DE bit. Fix it. And for good measure clear the pointer to the north hpd pin array, so that we'll actually notice if some other place is also using the wrong thing. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302161013.29213-3-ville.syrjala@linux.intel.com
* drm/i915: remove unnecessary intel_pm.h includesJani Nikula2023-03-061-1/+0
| | | | | | | | | As intel_pm.[ch] used to contain much more, intel_pm.h was included in a lot of places. Many of them are now unnecessary. Remove. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ab9a7147b0cd63d95b9f27ed40615b9c9be18f84.1677678803.git.jani.nikula@intel.com
* drm/i915: Mask page table errors on gen2/3 with FBCVille Syrjälä2023-02-231-2/+20
| | | | | | | | | | | | | | | | | FBC on gen2/3 seems to trigger page table errors. No visual artifacts are visible, and essentially the same FBC code works on gen4 so these seem entirely spurious. There are also hints in gen3 bspec indicating that certain bits in PGTBL_ER are just not wired up correctly in the hardware. Ideally we'd want to mask out only the bogus bits, but sadly there is no mask for PGTBL_ER, and instead we are forced to mask out all page table errors via EMR :( Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125185234.21599-6-ville.syrjala@linux.intel.com Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
* drm/i915: Extract {i9xx,i965)_error_mask()Ville Syrjälä2023-02-231-21/+25
| | | | | | | | Pull the EMR calculation into small helpers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125185234.21599-5-ville.syrjala@linux.intel.com Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
* drm/i915: Dump PGTBL_ER on gen2/3/4 error interruptVille Syrjälä2023-02-231-0/+6
| | | | | | | | | PGTBL_ER contains the individual reasons for the page table error interrupt. Dump it out. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125185234.21599-4-ville.syrjala@linux.intel.com Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
* drm/i915: Undo rmw damage to gen3 error interrupt handlerVille Syrjälä2023-02-231-5/+5
| | | | | | | | | | | | | | The gen2/gen3 irq code is supposed to be identical apart from the 32bit vs. 16bit access width. The recent change to intel_de_rmw() ruined that symmetry. Restore it to avoid needless mental gymnastics when comparing the two codepaths. And while at it remove the extra eir!=0 check that somehow ended up in the gen2 codepath only. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125185234.21599-3-ville.syrjala@linux.intel.com Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
* drm/i915: Replace intel_bios_is_port_hpd_inverted() with ↵Ville Syrjälä2023-02-141-4/+3
| | | | | | | | | | | | | | intel_bios_encoder_hpd_invert() intel_bios_is_port_hpd_inverted() is only used on bxt/glk on which we always have encoder->devdata available. So consult that instead of digging around in vbt.ports[]. And rename the function to match the common pattern. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
* drm/i915: Pass the whole encoder to hotplug_enables()Ville Syrjälä2023-02-141-30/+24
| | | | | | | | | | | bxt_hotplug_enables() needs to dig out not only the hpd_pin but also the VBT child device info, so let's just pass in the whole encoder to avoid having to look things up multiple times. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
* drm/i915/irq: split out vblank/scanline code to intel_vblank.[ch]Jani Nikula2023-01-181-408/+0
| | | | | | | | | | The vblank/scanline code is fairly isolated in i915_irq.c. Split it out to new intel_vblank.[ch]. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e3e9016f5135dccae5110c291ba048567622e7a.1673873708.git.jani.nikula@intel.com
* Merge drm/drm-next into drm-intel-nextJani Nikula2023-01-021-5/+7
|\ | | | | | | | | | | Sync up with v6.2-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| * Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie2022-11-231-6/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
| * | drm/i915: Partial abandonment of legacy DRM logging macrosTvrtko Ursulin2022-11-101-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert some usages of legacy DRM logging macros into versions which tell us on which device have the events occurred. v2: * Don't have struct drm_device as local. (Jani, Ville) v3: * Store gt, not i915, in workaround list. (John) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com
* | | drm/i915/dsi: add support for ICL+ native MIPI GPIO sequenceJani Nikula2022-12-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting from ICL, the default for MIPI GPIO sequences seems to be using native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse many pins that quite frankly seem scary to poke based on the VBT sequences. We pretty much have to trust that the board is configured such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for anything else. MIPI sequence v4 also adds a flag to fall back to non-native sequences. v5: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler() too (Ville) - References instead of Closes issue 6131 because this does not fix everything v4: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville) v3: - Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>) v2: - Fix HPD pin output set (impacts GPIOs 0 and 5) - Fix GPIO data output direction set (impacts GPIOs 4 and 9) - Reduce register accesses to single intel_de_rwm() References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
* | | drm/i915: ratelimit errors in display engine irqLucas De Marchi2022-12-161-14/+14
| |/ |/| | | | | | | | | | | | | | | | | While debugging page table faults it's useful not to kill the machine with thousands of error mesages. Ratelimit all errors in gen8_de_irq_handler(). Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221215001459.3759580-1-lucas.demarchi@intel.com
* | drm/i915: remove circ_buf.h includesJiri Slaby (SUSE)2022-11-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last user of macros from that include was removed in 2018 by the commit below. Fixes: 6cc42152b02b ("drm/i915: Remove support for legacy debugfs crc interface") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221115070302.4064-1-jirislaby@kernel.org
* | Merge drm/drm-next into drm-intel-nextRodrigo Vivi2022-11-141-2/+2
|\ \ | |/ | | | | | | | | | | Catch up on 6.1-rc cycle in order to solve the intel_backlight conflict on linux-next. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
| * Merge tag 'drm-intel-next-2022-10-28' of ↵Dave Airlie2022-11-011-170/+100
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next - Hotplug code clean-up and organization (Jani, Gustavo) - More VBT specific code clean-up, doc, organization, and improvements (Ville) - More MTL enabling work (Matt, RK, Anusha, Jose) - FBC related clean-ups and improvements (Ville) - Removing unused sw_fence_await_reservation (Niranjana) - Big chunch of display house clean-up (Ville) - Many Watermark fixes and clean-ups (Ville) - Fix device info for devices without display (Jani) - Fix TC port PLLs after readout (Ville) - DPLL ID clean-ups (Ville) - Prep work for finishing (de)gamma readout (Ville) - PSR fixes and improvements (Jouni, Jose) - Reject excessive dotclocks early (Ville) - DRRS related improvements (Ville) - Simplify uncore register updates (Andrzej) - Fix simulated GPU reset wrt. encoder HW readout (Imre) - Add a ADL-P workaround (Jose) - Fix clear mask in GEN7_MISCCPCTL update (Andrzej) - Temporarily disable runtime_pm for discrete (Anshuman) - Improve fbdev debugs (Nirmoy) - Fix DP FRL link training status (Ankit) - Other small display fixes (Ankit, Suraj) - Allow panel fixed modes to have differing sync polarities (Ville) - Clean up crtc state flag checks (Ville) - Fix race conditions during DKL PHY accesses (Imre) - Prep-work for cdclock squash and crawl modes (Anusha) - ELD precompute and readout (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
| * \ Merge tag 'drm-intel-next-2022-09-16-1' of ↵Dave Airlie2022-09-211-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #2 for v6.1: Features and functionality: - More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha) - Allow seamless M/N changes on eDP panels that support it (Ville) - Switch DSC debugfs from output bpp to input bpc (Swati) Refactoring and cleanups: - Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville) - Plenty of VBT definition and parsing updates and cleanups (Ville) - Extract SKL watermark code to a separate file, and clean up (Ville) - Clean up IPC interfaces and debugfs (Jani) - Continue moving display data under drm_i915_private display sub-struct (Jani) - Display quirk handling refactoring and abstractions (Jani) - Stop using implicit dev_priv in gmbus registers (Jani) - BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani) - Use drm_dp_phy_name() for logging (Jani) - Use REG_BIT() macros for CDCLK registers (Stan) - Move display and media IP versions to runtime info (Radhakrishna) Fixes: - Fix DP MST suspend to avoid use-after-free (Andrzej) - Fix HPD suspend to avoid use-after-free for fbdev (Andrzej) - Fix various PSR issues regarding selective update and damage clips (Jouni) - Fix runtime pm wakerefs for driver remove and release (Mitul Golani) - Fix conditions for filtering fixed modes for panels (Ville) - Fix TV encoder clock computation (Ville) - Fix dvo mode_valid hook return type (Nathan Huckleberry) Merges: - Backmerge drm-next to sync the DP MST atomic changes (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
| * \ \ Merge tag 'drm-intel-gt-next-2022-09-16' of ↵Dave Airlie2022-09-211-2/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - MEI subsystem pieces for XeHP SDV GSC support These are Acked-by Greg. Driver Changes: - Release mmaps on RPM suspend on discrete GPUs (Anshuman) - Update GuC version to 7.5 on DG1, DG2 and ADL - Revert "drm/i915/dg2: extend Wa_1409120013 to DG2" (Lucas) - MTL enabling incl. standalone media (Matt R, Lucas) - Explicitly clear BB_OFFSET for new contexts on Gen8+ (Chris) - Fix throttling / perf limit reason decoding (Ashutosh) - XeHP SDV GSC support (Vitaly, Alexander, Tomas) - Fix issues with overrding firmware file paths (John) - Invert if-else ladders to check latest version first (Lucas) - Cancel GuC engine busyness worker synchronously (Umesh) - Skip applying copy engine fuses outside PVC (Lucas) - Eliminate Gen10 frequency read function (Lucas) - Static code checker fixes (Gaosheng) - Selftest improvements (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YyQ4Jgl3cpGL1/As@jlahtine-mobl.ger.corp.intel.com
| | * | | drm/i915/mtl: Use primary GT's irq lock for media GTMatt Roper2022-09-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we hook up interrupts (in the next patch), interrupts for the media GT are still processed as part of the primary GT's interrupt flow. As such, we should share the same IRQ lock with the primary GT. Let's convert gt->irq_lock into a pointer and just point the media GT's instance at the same lock the primary GT is using. v2: - Point media's gt->irq_lock at the primary GT lock properly. (Daniele) - Fix jump target for intel_root_gt_init_early errors. (Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-14-matthew.d.roper@intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | | | | drm/i915/irq: make gen2_irq_init()/gen2_irq_reset() staticJani Nikula2022-11-031-5/+5
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gen2 irq functions aren't used outside of i915_irq.h. Make them static, and remove the useless macro wrappers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b28f45ef4ef69ab7a6f96ffa3fa3118994667332.1667383630.git.jani.nikula@intel.com
* | | | drm/i915: fix clear mask in GEN7_MISCCPCTL updateAndrzej Hajda2022-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GEN7_DOP_CLOCK_GATE_ENABLE bit should be cleared, not inverse. The bug was introduced during conversion to intel_uncore_rmw helper. Suggested-by: Matt Roper <matthew.d.roper@intel.com> Fixes: 8cee664d3eb6f8 ("drm/i915: use proper helper for register updates") Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017085525.3898649-1-andrzej.hajda@intel.com
* | | | drm/i915: use proper helper for register updatesAndrzej Hajda2022-10-111-144/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is special helper for register read/modify/write. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006163200.2803722-5-andrzej.hajda@intel.com
* | | | drm/i915/display: Use intel_uncore alias if definedAndrzej Hajda2022-10-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alias is shorter and more readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006163200.2803722-3-andrzej.hajda@intel.com
* | | | drm/i915/display: remove drm_device aliasesAndrzej Hajda2022-10-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm_device pointers are unwelcome. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006204844.2831303-1-andrzej.hajda@intel.com
* | | | drm/i915: Move hotplug inversion logic into separate helperGustavo Sousa2022-09-231-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use *_hpd_invert() helpers whenever possible to isolate logic specific to hotplug inversion from common HPD setup logic to improve readability and maintainability of the source code. While we only define dg1_hpd_invert() here, future platforms are likely to have different hotplug inversion needs, thus it makes sense grouping different implementations under a common suffix. v2: Fix coding style and prefer to use small *_hdp_invert() helpers instead of a generic one. CC: Jani Nikula <jani.nikula@linux.intel.com> CC: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220922164949.163985-1-gustavo.sousa@intel.com
* | | | drm/i915/hotplug: refactor hotplug init slightlyJani Nikula2022-09-191-10/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | Rename intel_hpd_init_work() to the more generic intel_hpd_init_early(), and move the hotplug storm initialization there. This lets us move the HPD_STORM_DEFAULT_THRESHOLD macro to intel_hotplug.c too. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916130634.3781122-2-jani.nikula@intel.com
* | | drm/i915: move opregion to display.opregionJani Nikula2022-08-311-1/+1
|/ / | | | | | | | | | | | | | | | | Move display opregion related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a0ceb5148835fa3e0828786ae491fcd11e2e77ff.1661779055.git.jani.nikula@intel.com
* | drm/i915: move hotplug to display.hotplugJani Nikula2022-08-291-26/+26
| | | | | | | | | | | | | | | | | | | | | | Move display hotplug related members under drm_i915_private display sub-struct. Rename struct i915_hotplug to intel_hotplug while at it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c1c7562a31c115e9d6a131861e4ca9c97d4f7e09.1661346845.git.jani.nikula@intel.com
* | drm/i915: move and group gmbus members under display.gmbusJani Nikula2022-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | Move display gmbus related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9379e4d8982c1ddea215a3f602f08a4055928c7c.1661346845.git.jani.nikula@intel.com
* | drm/i915: move hotplug_funcs to display.funcsJani Nikula2022-08-291-10/+10
| | | | | | | | | | | | | | | | | | | | Move display hotplug functions under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1cf677f1d02b8b621ec41ff77fe5de26d4f6954a.1661346845.git.jani.nikula@intel.com
* | drm/i915/irq: Fix a "the the" typoBo Liu2022-08-171-1/+1
| | | | | | | | | | | | | | | | | | There is an unexpected word "the" in the file i915_irq.c, fix it. Signed-off-by: Bo Liu <liubo03@inspur.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220816094919.5419-1-liubo03@inspur.com
* | drm/i915: Pass drm_i915_private struct instead of gt for ↵Anusha Srivatsa2022-07-271-8/+8
|/ | | | | | | | | | | | | | | | gen11_gu_misc_irq_handler/ack() gen11_gu_misc_irq_handler() and gen11_gu_misc_ack() do nothing tile specific. v2: gen11_gu_misc_irq_ack() tile agnostic like gen11_gu_misc_irq_handler() (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220721225100.693589-1-anusha.srivatsa@intel.com
* drm/i915/reg: split out icl_dsi_regs.hJani Nikula2022-02-211-0/+1
| | | | | | | | | | The ICL DSI registers have fairly isolated usage. Split the register macros to a separate file. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-4-jani.nikula@intel.com
* drm/i915/dg2: Enable 5th portMatt Roper2022-02-181-1/+4
| | | | | | | | | | | | | | | | | | | | | | DG2 supports a 5th display output which the hardware refers to as "TC1," even though it isn't a Type-C output. This behaves similarly to the TC1 on past platforms with just a couple minor differences: * DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on ICP/TGP/ADP. * DG2 doesn't need the hpd inversion setting that we had to use on DG1 v2: intel_ddi_init(dev_priv, PORT_TC1); [Matt] Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
* drm/i915: move the DRIVER_* macros to i915_driver.[ch]Jani Nikula2022-02-101-0/+1
| | | | | | | | | | The macros are more at home in i915_driver.[ch]. v2: Rebase Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209123121.3337496-1-jani.nikula@intel.com
* drm/i915/hpd: hide struct intel_hotplug_funcsJani Nikula2022-02-091-0/+10
| | | | | | | | | With intel_hpd_irq_setup() in i915_irq.c, struct intel_hotplug_funcs is also only needed there. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9a10dbca7ad298dde62b83f76e0df43a67bceeef.1643896905.git.jani.nikula@intel.com
* drm/i915: Move GT registers to their own header fileMatt Roper2022-02-021-0/+1
| | | | | | | | | | | | | | | | | | This is a huge, chaotic mass of registers copied over as-is without any real cleanup. We'll come back and organize these better, align on consistent coding style, remove dead code, etc. in separate patches later that will be easier to review. v2: - Add missing include in intel_pxp_irq.c v3: - Correct a few indentation errors (Lucas) - Minor conflict resolution Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
* Merge drm/drm-next into drm-intel-nextRodrigo Vivi2022-01-311-35/+39
|\ | | | | | | | | | | | | Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next for a possible topic branch for merging the split of i915_regs... Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
| * Merge tag 'drm-intel-gt-next-2021-12-23' of ↵Dave Airlie2021-12-241-28/+28
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld) - Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa) - Fixed debugfs access crash if GuC failed to load (John Harrison) - Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström) - Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström) - Exclude reserved stolen from driver use (Chris Wilson) - Add memory region sanity checking and optional full test (Chris Wilson) - Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett) - Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost) - Don't hog IRQs when destroying GuC contexts (John Harrison) - Make GuC to Host communication more robust (Matthew Brost) - Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst) - Improve performance of reading GuC log from debugfs (John Harrison) - Log when GuC fails to reset an engine (John Harrison) - Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar) - Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König) - Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison) - Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko) - Add noreclaim annotations (Matthew Auld) - Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost) - Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti) - Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison) - Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa) - Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior) - Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi) - Selftest for stealing of guc ids (Matthew Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
| | * drm/i915: Use to_gt() helperMichał Winiarski2021-12-171-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use to_gt() helper consistently throughout the codebase. Pure mechanical s/i915->gt/to_gt(i915). No functional changes. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-10-andi.shyti@linux.intel.com
| * | Merge tag 'drm-intel-next-2021-12-14' of ↵Dave Airlie2021-12-171-4/+4
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://git.freedesktop.org/git/drm/drm-intel into drm-next drm/i915 feature pull #2 for v5.17: Features and functionality: - Add eDP privacy screen support (Hans) - Add Raptor Lake S (RPL-S) support (Anusha) - Add CD clock squashing support (Mika) - Properly support ADL-P without force probe (Clint) - Enable pipe color support (10 bit gamma) for display 13 platforms (Uma) - Update ADL-P DMC firmware to v2.14 (Madhumitha) Refactoring and cleanups: - More FBC refactoring preparing for multiple FBC instances (Ville) - Plane register cleanups (Ville) - Header refactoring and include cleanups (Jani) - Crtc helper and vblank wait function cleanups (Jani, Ville) - Move pipe/transcoder/abox masks under intel_device_info.display (Ville) Fixes: - Add a delay to let eDP source OUI write take effect (Lyude) - Use div32 version of MPLLB word clock for UHBR on SNPS PHY (Jani) - Fix DMC firmware loader overflow check (Harshit Mogalapalli) - Fully disable FBC on FIFO underruns (Ville) - Disable FBC with double wide pipe as mutually exclusive (Ville) - DG2 workarounds (Matt) - Non-x86 build fixes (Siva) - Fix HDR plane max width for NV12 (Vidya) - Disable IRQ for selftest timestamp calculation (Anshuman) - ADL-P VBT DDC pin mapping fix (Tejas) Merges: - Backmerge drm-next for privacy screen plumbing (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87ee6f5h9u.fsf@intel.com
| * \ \ Merge tag 'drm-intel-gt-next-2021-12-09' of ↵Dave Airlie2021-12-101-11/+15
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - Fix PENDING_ERROR leak in dma_fence_array_signaled() (Thomas Hellström) Driver Changes: - Fix runtime PM handling during PXP suspend (Tejas Upadhyay) - Improve eviction performance on discrete by implementing async TTM moves (Thomas Hellström, Maarten Lankhorst) - Improve robustness of error capture under memory pressure (Thomas Hellström) - Fix GuC PMU versus GPU reset handling (Umesh Nerlige Ramappa) - Use per device iommu check (Tvrtko Ursulin) - Make error capture work with async migration (Thomas Hellström) - Revert incorrect implementation of Wa_1508744258 causing hangs (José Roberto de Souza) - Disable coarse power gating on some DG2 steppings workaround (Matt Roper) - Add IC cache invalidation workaround on DG2 (Ramalingam C) - Move two Icelake workarounds to the right place (Raviteja Goud Talla) - Fix error pointer dereference in i915_gem_do_execbuffer() (Dan Carpenter) - Fixup a couple of generic and DG2 specific issues in migration code (Matthew Auld) - Fix kernel-doc warnings in i915_drm_object.c (Randy Dunlap) - Drop stealing of bits from i915_sw_fence function pointer (Matthew Brost) - Introduce new macros for i915 PTE (Michael Cheng) - Prep work for engine reset by reset domain lookup (Tejas Upadhyay) - Fixup drm-intel-gt-next build failure (Matthew Auld) - Fix live_engine_busy_stats selftests in GuC mode (Umesh Nerlige Ramappa) - Remove dma_resv_prune (Maarten Lankhorst) - Preserve huge pages enablement after driver reload (Matthew Auld) - Fix a NULL pointer dereference in igt_request_rewind() (selftests) (Zhou Qingyang) - Add workaround numbers to GEN7_COMMON_SLICE_CHICKEN1 whitelisting (José Roberto de Souza) - Increase timeouts in i915_gem_contexts selftests to handle GuC being slower (Bruce Chang) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/display/intel_fbc.c From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YbIBOeqhn+nPzaYD@tursulin-mobl2
| | * | drm/i915: rework some irq functions to take intel_gt as argumentPaulo Zanoni2021-11-101-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We'll be adding multi-tile support soon; on multi-tile platforms interrupts are per-tile and every tile has the full set of interrupt registers. In this commit we start passing intel_gt instead of dev_priv for the functions that are related to Xe_HP irq handling. Right now we're still passing tile 0 everywhere, but in later patches we'll start actually passing the correct tile. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Co-authored-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029032817.3747750-2-matthew.d.roper@intel.com
* | | | drm/i915: Bump DSL linemask to 20 bitsVille Syrjälä2022-01-261-5/+2
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since tgl PIPE_DSL has 20 bits for the scanline. Let's bump our definition to match. And while at it let's also add the define for the current field readback. We can also get rid of the gen2 vs. gen3+ nonsense since none of the extra bits ever did anything and just always read as zero. And now we extend all platforms to use the tgl+ 20 bits deinition, but again that is fine since all the bits used to be mbz and always read as zero on all the platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
* | | drm/i915/trace: split out display trace to a separate fileJani Nikula2021-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add display/intel_display_trace.[ch] for defining display tracepoints. The main goal is to reduce cross-includes between gem and display. It would be possible split up tracing even further, but that would lead to more boilerplate. We end up having to include intel_crtc.h in a few places because it was pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and that's no longer the case. There should be no changes to tracepoints. v3: - Rebase v2: - Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris) - Remove useless comments (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com
* | | drm/i915/crtc: rename intel_get_crtc_for_pipe() to intel_crtc_for_pipe()Jani Nikula2021-12-021-3/+3
|/ / | | | | | | | | | | | | | | | | | | The "get" in the name implies reference counting, remove it. This also makes the function conform to naming style. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6105d0ff44efac3c999af6382e4b0729e251f1e1.1638366969.git.jani.nikula@intel.com
* | drm/i915: Clean up DPINVGTT/VLV_DPFLIPSTAT bitsVille Syrjälä2021-11-191-1/+1
|/ | | | | | | | Use REG_BIT() & co. for DPINVTT/VLV_DPFLIPSTAT bits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-9-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
View Lorry Controller Status