summaryrefslogtreecommitdiff
path: root/drivers/thermal/samsung/exynos_tmu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/samsung/exynos_tmu.c')
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c170
1 files changed, 57 insertions, 113 deletions
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14da3a4..49c09243fd38 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -77,16 +77,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
@@ -101,7 +91,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
temp_code = temp + pdata->default_temp_offset;
break;
}
-out:
+
return temp_code;
}
@@ -114,16 +104,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
@@ -138,18 +118,35 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
temp = temp_code - pdata->default_temp_offset;
break;
}
-out:
+
return temp;
}
+static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ const struct exynos_tmu_registers *reg = data->pdata->registers;
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + reg->tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + reg->tmu_intclear);
+}
+
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
+ int ret = 0, threshold_code, i;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -164,11 +161,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
-
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
/* Save trimming info in order to perform calibration */
if (data->soc == SOC_ARCH_EXYNOS5440) {
@@ -197,7 +200,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
@@ -207,67 +210,33 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
+ (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
-skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
-
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
-
rising_threshold = readl(data->base + reg->threshold_th0);
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
writeb(threshold_code,
data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
} else {
/* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i] -
pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
+ falling_threshold |= threshold_code << 8 * i;
}
}
@@ -276,9 +245,7 @@ skip_calib_data:
writel(falling_threshold,
data->base + reg->threshold_th1);
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
/* if last threshold limit is also present */
i = pdata->max_trigger_level - 1;
@@ -286,10 +253,6 @@ skip_calib_data:
(pdata->trigger_type[i] == HW_TRIP)) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
@@ -325,7 +288,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
+ unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -335,15 +298,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
@@ -351,29 +310,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
-
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
@@ -383,7 +321,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
@@ -404,8 +342,16 @@ static int exynos_tmu_read(struct exynos_tmu_data *data)
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ temp = code_to_temp(data, temp_code);
+out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -465,7 +411,7 @@ static void exynos_tmu_work(struct work_struct *work)
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
+ unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
@@ -483,9 +429,7 @@ static void exynos_tmu_work(struct work_struct *work)
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);