diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/iio/adc/Makefile | 3 | ||||
| -rw-r--r-- | drivers/iio/adc/ti_am335x_adc.c | 260 | ||||
| -rw-r--r-- | drivers/iio/adc/viperboard_adc.c | 181 |
4 files changed, 457 insertions, 1 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 961b8d0a4bac..fe822a14d130 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -125,4 +125,18 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_AM335X_ADC + tristate "TI's ADC driver" + depends on MFD_TI_AM335X_TSCADC + help + Say yes here to build support for Texas Instruments ADC + driver which is also a MFD client. + +config VIPERBOARD_ADC + tristate "Viperboard ADC support" + depends on MFD_VIPERBOARD && USB + help + Say yes here to access the ADC part of the Nano River + Technologies Viperboard. + endmenu diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 472fd7cd2417..2d5f10080d8d 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -13,4 +13,5 @@ obj-$(CONFIG_AT91_ADC) += at91_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o - +obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o +obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c new file mode 100644 index 000000000000..02a43c87a8a3 --- /dev/null +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -0,0 +1,260 @@ +/* + * TI ADC MFD driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/iio/iio.h> + +#include <linux/mfd/ti_am335x_tscadc.h> +#include <linux/platform_data/ti_am335x_adc.h> + +struct tiadc_device { + struct ti_tscadc_dev *mfd_tscadc; + int channels; +}; + +static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg) +{ + return readl(adc->mfd_tscadc->tscadc_base + reg); +} + +static void tiadc_writel(struct tiadc_device *adc, unsigned int reg, + unsigned int val) +{ + writel(val, adc->mfd_tscadc->tscadc_base + reg); +} + +static void tiadc_step_config(struct tiadc_device *adc_dev) +{ + unsigned int stepconfig; + int i, channels = 0, steps; + + /* + * There are 16 configurable steps and 8 analog input + * lines available which are shared between Touchscreen and ADC. + * + * Steps backwards i.e. from 16 towards 0 are used by ADC + * depending on number of input lines needed. + * Channel would represent which analog input + * needs to be given to ADC to digitalize data. + */ + + steps = TOTAL_STEPS - adc_dev->channels; + channels = TOTAL_CHANNELS - adc_dev->channels; + + stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1; + + for (i = (steps + 1); i <= TOTAL_STEPS; i++) { + tiadc_writel(adc_dev, REG_STEPCONFIG(i), + stepconfig | STEPCONFIG_INP(channels)); + tiadc_writel(adc_dev, REG_STEPDELAY(i), + STEPCONFIG_OPENDLY); + channels++; + } + tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB); +} + +static int tiadc_channel_init(struct iio_dev *indio_dev, int channels) +{ + struct iio_chan_spec *chan_array; + int i; + + indio_dev->num_channels = channels; + chan_array = kcalloc(indio_dev->num_channels, + sizeof(struct iio_chan_spec), GFP_KERNEL); + + if (chan_array == NULL) + return -ENOMEM; + + for (i = 0; i < (indio_dev->num_channels); i++) { + struct iio_chan_spec *chan = chan_array + i; + chan->type = IIO_VOLTAGE; + chan->indexed = 1; + chan->channel = i; + chan->info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT; + } + + indio_dev->channels = chan_array; + + return indio_dev->num_channels; +} + +static void tiadc_channels_remove(struct iio_dev *indio_dev) +{ + kfree(indio_dev->channels); +} + +static int tiadc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + int i; + unsigned int fifo1count, readx1; + + /* + * When the sub-system is first enabled, + * the sequencer will always start with the + * lowest step (1) and continue until step (16). + * For ex: If we have enabled 4 ADC channels and + * currently use only 1 out of them, the + * sequencer still configures all the 4 steps, + * leading to 3 unwanted data. + * Hence we need to flush out this data. + */ + + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + for (i = 0; i < fifo1count; i++) { + readx1 = tiadc_readl(adc_dev, REG_FIFO1); + if (i == chan->channel) + *val = readx1 & 0xfff; + } + tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB); + + return IIO_VAL_INT; +} + +static const struct iio_info tiadc_info = { + .read_raw = &tiadc_read_raw, +}; + +static int __devinit tiadc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct tiadc_device *adc_dev; + struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; + struct mfd_tscadc_board *pdata; + int err; + + pdata = tscadc_dev->dev->platform_data; + if (!pdata || !pdata->adc_init) { + dev_err(&pdev->dev, "Could not find platform data\n"); + return -EINVAL; + } + + indio_dev = iio_device_alloc(sizeof(struct tiadc_device)); + if (indio_dev == NULL) { + dev_err(&pdev->dev, "failed to allocate iio device\n"); + err = -ENOMEM; + goto err_ret; + } + adc_dev = iio_priv(indio_dev); + + adc_dev->mfd_tscadc = tscadc_dev; + adc_dev->channels = pdata->adc_init->adc_channels; + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &tiadc_info; + + tiadc_step_config(adc_dev); + + err = tiadc_channel_init(indio_dev, adc_dev->channels); + if (err < 0) + goto err_free_device; + + err = iio_device_register(indio_dev); + if (err) + goto err_free_channels; + + platform_set_drvdata(pdev, indio_dev); + + return 0; + +err_free_channels: + tiadc_channels_remove(indio_dev); +err_free_device: + iio_device_free(indio_dev); +err_ret: + return err; +} + +static int __devexit tiadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + iio_device_unregister(indio_dev); + tiadc_channels_remove(indio_dev); + + iio_device_free(indio_dev); + + return 0; +} + +#ifdef CONFIG_PM +static int tiadc_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tiadc_device *adc_dev = iio_priv(indio_dev); + struct ti_tscadc_dev *tscadc_dev = dev->platform_data; + unsigned int idle; + + if (!device_may_wakeup(tscadc_dev->dev)) { + idle = tiadc_readl(adc_dev, REG_CTRL); + idle &= ~(CNTRLREG_TSCSSENB); + tiadc_writel(adc_dev, REG_CTRL, (idle | + CNTRLREG_POWERDOWN)); + } + + return 0; +} + +static int tiadc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tiadc_device *adc_dev = iio_priv(indio_dev); + unsigned int restore; + + /* Make sure ADC is powered up */ + restore = tiadc_readl(adc_dev, REG_CTRL); + restore &= ~(CNTRLREG_POWERDOWN); + tiadc_writel(adc_dev, REG_CTRL, restore); + + tiadc_step_config(adc_dev); + + return 0; +} + +static const struct dev_pm_ops tiadc_pm_ops = { + .suspend = tiadc_suspend, + .resume = tiadc_resume, +}; +#define TIADC_PM_OPS (&tiadc_pm_ops) +#else +#define TIADC_PM_OPS NULL +#endif + +static struct platform_driver tiadc_driver = { + .driver = { + .name = "tiadc", + .owner = THIS_MODULE, + .pm = TIADC_PM_OPS, + }, + .probe = tiadc_probe, + .remove = __devexit_p(tiadc_remove), +}; + +module_platform_driver(tiadc_driver); + +MODULE_DESCRIPTION("TI ADC controller driver"); +MODULE_AUTHOR("Rachna Patil <rachna@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/viperboard_adc.c b/drivers/iio/adc/viperboard_adc.c new file mode 100644 index 000000000000..10136a8b20d4 --- /dev/null +++ b/drivers/iio/adc/viperboard_adc.c @@ -0,0 +1,181 @@ +/* + * Nano River Technologies viperboard IIO ADC driver + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel <poeschel@lemonage.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#include <linux/usb.h> +#include <linux/iio/iio.h> + +#include <linux/mfd/viperboard.h> + +#define VPRBRD_ADC_CMD_GET 0x00 + +struct vprbrd_adc_msg { + u8 cmd; + u8 chan; + u8 val; +} __packed; + +struct vprbrd_adc { + struct vprbrd *vb; +}; + +#define VPRBRD_ADC_CHANNEL(_index) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 8, \ + .storagebits = 8, \ + }, \ +} + +static struct iio_chan_spec const vprbrd_adc_iio_channels[] = { + VPRBRD_ADC_CHANNEL(0), + VPRBRD_ADC_CHANNEL(1), + VPRBRD_ADC_CHANNEL(2), + VPRBRD_ADC_CHANNEL(3), +}; + +static int vprbrd_iio_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long info) +{ + int ret, error = 0; + struct vprbrd_adc *adc = iio_priv(iio_dev); + struct vprbrd *vb = adc->vb; + struct vprbrd_adc_msg *admsg = (struct vprbrd_adc_msg *)vb->buf; + + switch (info) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&vb->lock); + + admsg->cmd = VPRBRD_ADC_CMD_GET; + admsg->chan = chan->scan_index; + admsg->val = 0x00; + + ret = usb_control_msg(vb->usb_dev, + usb_sndctrlpipe(vb->usb_dev, 0), VPRBRD_USB_REQUEST_ADC, + VPRBRD_USB_TYPE_OUT, 0x0000, 0x0000, admsg, + sizeof(struct vprbrd_adc_msg), VPRBRD_USB_TIMEOUT_MS); + if (ret != sizeof(struct vprbrd_adc_msg)) { + dev_err(&iio_dev->dev, "usb send error on adc read\n"); + error = -EREMOTEIO; + } + + ret = usb_control_msg(vb->usb_dev, + usb_rcvctrlpipe(vb->usb_dev, 0), VPRBRD_USB_REQUEST_ADC, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, admsg, + sizeof(struct vprbrd_adc_msg), VPRBRD_USB_TIMEOUT_MS); + + *val = admsg->val; + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_adc_msg)) { + dev_err(&iio_dev->dev, "usb recv error on adc read\n"); + error = -EREMOTEIO; + } + + if (error) + goto error; + + return IIO_VAL_INT; + default: + error = -EINVAL; + break; + } +error: + return error; +} + +static const struct iio_info vprbrd_adc_iio_info = { + .read_raw = &vprbrd_iio_read_raw, + .driver_module = THIS_MODULE, +}; + +static int __devinit vprbrd_adc_probe(struct platform_device *pdev) +{ + struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent); + struct vprbrd_adc *adc; + struct iio_dev *indio_dev; + int ret; + + /* registering iio */ + indio_dev = iio_device_alloc(sizeof(*adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + adc = iio_priv(indio_dev); + adc->vb = vb; + indio_dev->name = "viperboard adc"; + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &vprbrd_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = vprbrd_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(vprbrd_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "could not register iio (adc)"); + goto error; + } + + platform_set_drvdata(pdev, indio_dev); + + return 0; + +error: + iio_device_free(indio_dev); + return ret; +} + +static int __devexit vprbrd_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + iio_device_unregister(indio_dev); + iio_device_free(indio_dev); + + return 0; +} + +static struct platform_driver vprbrd_adc_driver = { + .driver = { + .name = "viperboard-adc", + .owner = THIS_MODULE, + }, + .probe = vprbrd_adc_probe, + .remove = __devexit_p(vprbrd_adc_remove), +}; + +module_platform_driver(vprbrd_adc_driver); + +MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>"); +MODULE_DESCRIPTION("IIO ADC driver for Nano River Techs Viperboard"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:viperboard-adc"); |