diff options
Diffstat (limited to 'arch/x86/include/asm/debugreg.h')
| -rw-r--r-- | arch/x86/include/asm/debugreg.h | 79 |
1 files changed, 1 insertions, 78 deletions
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h index 2d91580bf228..4b528a970bd4 100644 --- a/arch/x86/include/asm/debugreg.h +++ b/arch/x86/include/asm/debugreg.h @@ -2,83 +2,8 @@ #define _ASM_X86_DEBUGREG_H -/* Indicate the register numbers for a number of the specific - debug registers. Registers 0-3 contain the addresses we wish to trap on */ -#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */ -#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */ - -#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */ -#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */ - -/* Define a few things for the status register. We can use this to determine - which debugging register was responsible for the trap. The other bits - are either reserved or not of interest to us. */ - -/* Define reserved bits in DR6 which are always set to 1 */ -#define DR6_RESERVED (0xFFFF0FF0) - -#define DR_TRAP0 (0x1) /* db0 */ -#define DR_TRAP1 (0x2) /* db1 */ -#define DR_TRAP2 (0x4) /* db2 */ -#define DR_TRAP3 (0x8) /* db3 */ -#define DR_TRAP_BITS (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3) - -#define DR_STEP (0x4000) /* single-step */ -#define DR_SWITCH (0x8000) /* task switch */ - -/* Now define a bunch of things for manipulating the control register. - The top two bytes of the control register consist of 4 fields of 4 - bits - each field corresponds to one of the four debug registers, - and indicates what types of access we trap on, and how large the data - field is that we are looking at */ - -#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */ -#define DR_CONTROL_SIZE 4 /* 4 control bits per register */ - -#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */ -#define DR_RW_WRITE (0x1) -#define DR_RW_READ (0x3) - -#define DR_LEN_1 (0x0) /* Settings for data length to trap on */ -#define DR_LEN_2 (0x4) -#define DR_LEN_4 (0xC) -#define DR_LEN_8 (0x8) - -/* The low byte to the control register determine which registers are - enabled. There are 4 fields of two bits. One bit is "local", meaning - that the processor will reset the bit after a task switch and the other - is global meaning that we have to explicitly reset the bit. With linux, - you can use either one, since we explicitly zero the register when we enter - kernel mode. */ - -#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */ -#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */ -#define DR_LOCAL_ENABLE (0x1) /* Local enable for reg 0 */ -#define DR_GLOBAL_ENABLE (0x2) /* Global enable for reg 0 */ -#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */ - -#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */ -#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */ - -/* The second byte to the control register has a few special things. - We can slow the instruction pipeline for instructions coming via the - gdt or the ldt if we want to. I am not sure why this is an advantage */ - -#ifdef __i386__ -#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */ -#else -#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */ -#endif - -#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */ -#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */ - -/* - * HW breakpoint additions - */ -#ifdef __KERNEL__ - #include <linux/bug.h> +#include <uapi/asm/debugreg.h> DECLARE_PER_CPU(unsigned long, cpu_dr7); @@ -190,6 +115,4 @@ static inline void debug_stack_usage_dec(void) { } #endif /* X86_64 */ -#endif /* __KERNEL__ */ - #endif /* _ASM_X86_DEBUGREG_H */ |