diff options
Diffstat (limited to 'arch/arm')
81 files changed, 622 insertions, 487 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..36586dba6fa6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1186,6 +1186,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 15ded0deaa79..45bc4bb04e57 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -10,7 +10,7 @@ intc: interrupt-controller@02080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x02080000 0x1000 >, < 0x02081000 0x1000 >; }; @@ -19,6 +19,6 @@ compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <195>; + interrupts = <0 195 0x0>; }; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 0b32925f2147..e2fe3195c0d1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -173,7 +173,7 @@ mmc@5000 { compatible = "arm,primecell"; reg = < 0x5000 0x1000>; - interrupts = <22>; + interrupts = <22 34>; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 166461073b78..7e8175269064 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -41,7 +41,7 @@ mmc@b000 { compatible = "arm,primecell"; reg = <0xb000 0x1000>; - interrupts = <23>; + interrupts = <23 34>; }; }; }; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12af..6b31cb60daab 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 42da9183acc8..082175c54e7c 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_S3C24XX=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae1..7e84f453e8a6 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d4c24d412a8d..0f04d84582e1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *); extern void vfp_sync_hwstate(struct thread_info *); extern void vfp_flush_hwstate(struct thread_info *); +struct user_vfp; +struct user_vfp_exc; + +extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); +extern int vfp_restore_user_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); #endif /* diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 60843eb0f61c..73409e6c0251 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -7,6 +7,8 @@ .macro set_tls_v6k, tp, tmp1, tmp2 mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + mov \tmp1, #0 + mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register .endm .macro set_tls_v6, tp, tmp1, tmp2 @@ -15,6 +17,8 @@ mov \tmp2, #0xffff0fff tst \tmp1, #HWCAP_TLS @ hardware TLS available? mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + movne \tmp1, #0 + mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 71ccdbfed662..8349d4e97e2b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc) } c = irq_data_get_irq_chip(d); - if (c->irq_set_affinity) - c->irq_set_affinity(d, affinity, true); - else + if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); return ret; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 80abafb9bf33..9650c143afc1 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -906,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -#ifdef __ARMEB__ -#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB -#else -#define AUDIT_ARCH_NR AUDIT_ARCH_ARM -#endif - asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; - /* - * Save IP. IP is used to denote syscall entry/exit: - * IP = 0 -> entry, = 1 -> exit - */ - ip = regs->ARM_ip; - regs->ARM_ip = why; - - if (!ip) + if (why) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) @@ -936,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) current_thread_info()->syscall = scno; + /* + * IP is used to denote syscall entry/exit: + * IP = 0 -> entry, =1 -> exit + */ + ip = regs->ARM_ip; + regs->ARM_ip = why; + /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 7cb532fc8aa4..d68d1b694680 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; const unsigned long magic = VFP_MAGIC; const unsigned long size = VFP_STORAGE_SIZE; int err = 0; - vfp_sync_hwstate(thread); __put_user_error(magic, &frame->magic, err); __put_user_error(size, &frame->size, err); - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __put_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Copy the exception registers. - */ - __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); - __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + if (err) + return -EFAULT; - return err ? -EFAULT : 0; + return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); } static int restore_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; unsigned long magic; unsigned long size; - unsigned long fpexc; int err = 0; __get_user_error(magic, &frame->magic, err); @@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; - vfp_flush_hwstate(thread); - - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __get_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Sanitise and restore the exception registers. - */ - __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - /* Ensure FPINST2 is invalid and the exception flag is cleared. */ - fpexc &= ~(FPEXC_EX | FPEXC_FP2V); - h->fpexc = fpexc; - - __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc); } #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index addbbe8028c2..8f4644659777 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); - printk("CPU%u: Booted secondary processor\n", cpu); - /* * All kernel threads share the same mm context; grab a * reference and switch to it. @@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void) enter_lazy_tlb(mm, current); local_flush_tlb_all(); + printk("CPU%u: Booted secondary processor\n", cpu); + cpu_init(); preempt_disable(); trace_hardirqs_off(); @@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); -#ifdef CONFIG_HOTPLUG_CPU - platform_cpu_kill(cpu); -#endif - while (1) cpu_relax(); } @@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_HOTPLUG_CPU +static void smp_kill_cpus(cpumask_t *mask) +{ + unsigned int cpu; + for_each_cpu(cpu, mask) + platform_cpu_kill(cpu); +} +#else +static void smp_kill_cpus(cpumask_t *mask) { } +#endif + void smp_send_stop(void) { unsigned long timeout; + struct cpumask mask; - if (num_online_cpus() > 1) { - struct cpumask mask; - cpumask_copy(&mask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &mask); - - smp_cross_call(&mask, IPI_CPU_STOP); - } + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; @@ -595,6 +599,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); + + smp_kill_cpus(&mask); } /* diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 5b150afb995b..fef42b21cecb 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb, * The twd clock events must be reprogrammed to account for the new * frequency. The timer is local to a cpu, so cross-call to the * changing cpu. - * - * Only wait for it to finish, if the cpu is active to avoid - * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during - * booting of that cpu. */ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, cpu_active(freqs->cpu)); + NULL, 1); return NOTIFY_OK; } diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index d2b177905cdb..76cbb055dd05 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -115,7 +115,7 @@ int kernel_execve(const char *filename, "Ir" (THREAD_START_SP - sizeof(regs)), "r" (®s), "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); + : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory"); out: return ret; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 99ce5c955e39..05774e5b1cba 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void) printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b91..104ca40d8d18 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> +#include <linux/export.h> #include <asm/mach/time.h> @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 11cbaa8946fe..b2e4fe21f346 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c3f994462864..065fed342424 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cdc..6b692824c988 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78f..ea2c57a86ca6 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc8073..f44a2e7272e3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad1..adbfb1994582 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e81c35f936b5..b8df521fb68e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -232,6 +232,9 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_HRT + select CLKSRC_MMIO + select HAVE_SCHED_CLOCK select S5P_GPIO_INT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index df54c2a92225..6efd1e5919fd 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = { static struct clksrc_clk exynos4_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = { static struct clksrc_clk exynos4_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = { static struct clksrc_clk exynos4_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = { static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index d013982d0f8e..7ac6ff4c46bd 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 20), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), @@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = { .name = "dma", .devname = "dma-pl330.1", .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), + .ctrlbit = (1 << 2), }; static struct clk exynos5_clk_mdma1 = { @@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8614aab47cc0..5ccd6e80a607 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,6 +326,11 @@ static void __init exynos4_map_io(void) s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -344,6 +349,11 @@ static void __init exynos5_map_io(void) s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -537,7 +547,9 @@ void __init exynos5_init_irq(void) { int irq; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); +#ifdef CONFIG_OF + of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c index b025db4bf602..79035018fb74 100644 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ b/arch/arm/mach-exynos/dev-dwmci.c @@ -16,6 +16,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/mmc/dw_mmc.h> #include <plat/devs.h> @@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) } static struct resource exynos4_dwmci_resource[] = { - [0] = { - .start = EXYNOS4_PA_DWMCI, - .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DWMCI, - .end = IRQ_DWMCI, - .flags = IORESOURCE_IRQ, - } + [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), }; static struct dw_mci_board exynos4_dwci_pdata = { diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b4f1f902ce6d..ed90aef404c3 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 7ebf79c2ab34..a34036eb8ba2 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -40,6 +40,7 @@ #include <plat/pd.h> #include <plat/regs-fb-v4.h> #include <plat/fimc-core.h> +#include <plat/s5p-time.h> #include <plat/camport.h> #include <plat/mipi_csis.h> @@ -747,6 +748,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -1062,6 +1064,7 @@ static void __init universal_map_io(void) exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void s5p_tv_setup(void) @@ -1112,7 +1115,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, - .timer = &exynos4_timer, + .timer = &s5p_timer, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d6..ed38d03c61f2 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61fb..e10f3914fcfe 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 1c672d9e6656..f7fe1b9f3170 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/kexec.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/bridge-regs.h> diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 962e71169750..fb3496a52ef4 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -17,6 +17,7 @@ #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/memblock.h> @@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void) msm_map_msm8x60_io(); } +#ifdef CONFIG_OF +static struct of_device_id msm_dt_gic_match[] __initdata = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; +#endif + static void __init msm8x60_init_irq(void) { - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); + if (!of_have_populated_dt()) + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); +#ifdef CONFIG_OF + else + of_irq_init(msm_dt_gic_match); +#endif /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); @@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", }, - {} -}; - static void __init msm8x60_dt_init(void) { - irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, - GIC_SPI_START); - if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); msm8x60_init_uart12dm(); diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff37630..cfd98b186fcc 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) struct irq_chip *irq_chip = NULL; int gpio, irq_num, fiq_count; - irq_desc = irq_to_desc(IH_GPIO_BASE); + irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); if (irq_desc) irq_chip = irq_desc->irq_data.chip; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47e..e9cc52d4cb28 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/spinlock.h> +#include <mach/hardware.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c47..fb202af01d0d 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8..130ab00c09a2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b5170..098d183a0086 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 930c0d380435..740cee9369ba 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -641,7 +641,7 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init igep_init(void) { - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126..1b782ba53433 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index 1e2d3322f33e..c88420de1151 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI2_PIPD_SHIFT 19 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI1_PIPD_SHIFT 14 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e66..7144ae651d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f323..a6bde34e443a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d..04a3885f4475 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d23..db86ce90c69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a854..6abc75753e42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128e..9fc2f44188cb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1..7a7b89304c48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27a..09627483a57f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h index eac68978a2c2..db70e79a1198 100644 --- a/arch/arm/mach-orion5x/mpp.h +++ b/arch/arm/mach-orion5x/mpp.h @@ -65,8 +65,8 @@ #define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1) #define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1) +#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1, 1, 1) +#define MPP9_GIGE MPP(9, 0x1, 0, 0, 1, 1, 1) #define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index c54cef25895c..cbf51ae81855 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -17,6 +17,7 @@ * * bit 23 - Input/Output (PXA2xx specific) * bit 24 - Wakeup Enable(PXA2xx specific) + * bit 25 - Keep Output (PXA2xx specific) */ #define MFP_DIR_IN (0x0 << 23) @@ -25,6 +26,12 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) + +/* + * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to + * retain their last output level (low or high). + * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input. + */ #define MFP_LPM_KEEP_OUTPUT (0x1 << 25) #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b0a842887780..ef0426a159d4 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -33,6 +33,8 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) #define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24) #define PWER_WE35 (1 << 24) @@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(void) @@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void) } for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { - saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_gplr[i] = GPLR(i * 32); saved_pgsr[i] = PGSR(i); - GPDR(i * 32) = gpdr_lpm[i]; + GPSR(i * 32) = PGSR(i); + GPCR(i * 32) = ~PGSR(i); + } + + /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) || + ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i)))) + GPDR(i) |= GPIO_bit(i); + else + GPDR(i) &= ~GPIO_bit(i); } + return 0; } @@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; + GPSR(i * 32) = saved_gplr[i]; + GPCR(i * 32) = ~saved_gplr[i]; GPDR(i * 32) = saved_gpdr[i]; PGSR(i) = saved_pgsr[i]; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6bce78edce7a..4726c246dcdc 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -458,6 +461,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0f3a327ebcaa..b34287ab5afd 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -# cpu-specific sections - -if CPU_S3C2410 - config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -127,6 +123,10 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# cpu-specific sections + +if CPU_S3C2410 + config S3C24XX_SIMTEC_NOR bool help diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index a8933de3d627..32395664e879 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -25,6 +25,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <linux/interrupt.h> #include <asm/hardware/vic.h> @@ -765,6 +766,7 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c524b4e415d..16be4c56abe3 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda) } static struct resource sa1100_rtc_resources[] = { - DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_MEM(0x90010000, 0x40), DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), }; diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index cb224a344af0..0891ec6e27f5 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = { }; /* SDHI0 */ -static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg) -{ - struct device *dev = arg; - struct sh_mobile_sdhi_info *info = dev->platform_data; - struct tmio_mmc_data *pdata = info->pdata; - - tmio_mmc_cd_wakeup(pdata); - - return IRQ_HANDLED; -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = GPIO_PORT251, }; static struct resource sdhi0_resources[] = { @@ -557,7 +547,6 @@ static void __init ag5evm_init(void) lcd_backlight_reset(); /* enable SDHI0 on CN15 [SD I/F] */ - gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHICLK0, NULL); @@ -566,13 +555,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); - if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "sdhi0 cd", &sdhi0_device.dev)) - sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; - else - pr_warn("Unable to setup SDHI0 GPIO IRQ\n"); - /* enable SDHI1 on CN4 [WLAN I/F] */ gpio_request(GPIO_FN_SDHICLK1, NULL); gpio_request(GPIO_FN_SDHICMD1_PU, NULL); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 1bf1b2b8f8e9..fb27bac4cfd1 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1038,21 +1038,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev) } /* SDHI0 */ -static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg) -{ - struct device *dev = arg; - struct sh_mobile_sdhi_info *info = dev->platform_data; - struct tmio_mmc_data *pdata = info->pdata; - - tmio_mmc_cd_wakeup(pdata); - - return IRQ_HANDLED; -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .cd_gpio = GPIO_PORT172, }; static struct resource sdhi0_resources[] = { @@ -1411,7 +1402,6 @@ static void __init mackerel_init(void) { u32 srcr4; struct clk *clk; - int ret; /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1508,7 +1498,6 @@ static void __init mackerel_init(void) irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); /* enable SDHI0 */ - gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHICLK0, NULL); @@ -1517,13 +1506,6 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); - ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd, - IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev); - if (!ret) - sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; - else - pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret); - #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 6ac015c89206..b202c1272526 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -16,6 +16,59 @@ __CPUINIT +/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks! + * + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r5, c7, c6, 2 + bgt 2b + cmp r2, #0 + bgt 1b + dsb + isb + mov pc, lr +ENDPROC(v7_invalidate_l1) + +ENTRY(shmobile_invalidate_start) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(shmobile_invalidate_start) + /* * Reset vector for secondary CPUs. * This will be mapped at address 0 by SBAR register. @@ -24,4 +77,5 @@ .align 12 ENTRY(shmobile_secondary_vector) ldr pc, 1f -1: .long secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET +1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET +ENDPROC(shmobile_secondary_vector) diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 83ad3fe0a75f..c85e6ecda606 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,7 +4,6 @@ extern void shmobile_earlytimer_init(void); extern struct sys_timer shmobile_timer; struct twd_local_timer; -void shmobile_twd_init(struct twd_local_timer *twd_local_timer); extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); extern int shmobile_platform_cpu_kill(unsigned int cpu); @@ -82,5 +81,6 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu); extern void r8a7779_secondary_init(unsigned int cpu); extern int r8a7779_boot_secondary(unsigned int cpu); extern void r8a7779_smp_prepare_cpus(void); +extern void r8a7779_register_twd(void); #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 12c6f529ab89..e98e46f6cf55 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_late_devices)); } +/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ +void __init __weak r8a7779_register_twd(void) { } + static void __init r8a7779_earlytimer_init(void) { r8a7779_clock_init(); shmobile_earlytimer_init(); + r8a7779_register_twd(); } void __init r8a7779_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 5bebffc10455..04a0dfe75493 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void) ARRAY_SIZE(sh73a0_late_devices)); } +/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ +void __init __weak sh73a0_register_twd(void) { } + static void __init sh73a0_earlytimer_init(void) { sh73a0_clock_init(); shmobile_earlytimer_init(); + sh73a0_register_twd(); } void __init sh73a0_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b62e19d4c9af..6d1d0238cbf7 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +#ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +void __init r8a7779_register_twd(void) +{ + twd_local_timer_register(&twd_local_timer); +} +#endif + static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { void __iomem *scu_base = scu_base_addr(); @@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); - shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 14ad8b052f1a..e36c41c4ab40 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +#ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +void __init sh73a0_register_twd(void) +{ + twd_local_timer_register(&twd_local_timer); +} +#endif static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { @@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); - shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 2fba5f3d1c8a..8b79e7917a23 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -46,15 +46,6 @@ static void __init shmobile_timer_init(void) { } -void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer) -{ -#ifdef CONFIG_HAVE_ARM_TWD - int err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); -#endif -} - struct sys_timer shmobile_timer = { .init = shmobile_timer_init, }; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 1621ad07d284..33339745d432 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1667,8 +1667,10 @@ void __init u300_init_irq(void) for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); + vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, + mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, + mask[1], mask[1]); } diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index a38f80238ea9..cb04bd6ab3e7 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 2500000, .max_uV = 2500000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = { .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .boot_on = 1, }, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ee78a26707eb..ec09c1e07b1a 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,101 +12,101 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 0 -#define IRQ_U300_INTCON1_START 32 +#define IRQ_U300_INTCON0_START 1 +#define IRQ_U300_INTCON1_START 33 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 0 -#define IRQ_U300_IRQ1_EXT 1 -#define IRQ_U300_DMA 2 -#define IRQ_U300_VIDEO_ENC_0 3 -#define IRQ_U300_VIDEO_ENC_1 4 -#define IRQ_U300_AAIF_RX 5 -#define IRQ_U300_AAIF_TX 6 -#define IRQ_U300_AAIF_VGPIO 7 -#define IRQ_U300_AAIF_WAKEUP 8 -#define IRQ_U300_PCM_I2S0_FRAME 9 -#define IRQ_U300_PCM_I2S0_FIFO 10 -#define IRQ_U300_PCM_I2S1_FRAME 11 -#define IRQ_U300_PCM_I2S1_FIFO 12 -#define IRQ_U300_XGAM_GAMCON 13 -#define IRQ_U300_XGAM_CDI 14 -#define IRQ_U300_XGAM_CDICON 15 +#define IRQ_U300_IRQ0_EXT 1 +#define IRQ_U300_IRQ1_EXT 2 +#define IRQ_U300_DMA 3 +#define IRQ_U300_VIDEO_ENC_0 4 +#define IRQ_U300_VIDEO_ENC_1 5 +#define IRQ_U300_AAIF_RX 6 +#define IRQ_U300_AAIF_TX 7 +#define IRQ_U300_AAIF_VGPIO 8 +#define IRQ_U300_AAIF_WAKEUP 9 +#define IRQ_U300_PCM_I2S0_FRAME 10 +#define IRQ_U300_PCM_I2S0_FIFO 11 +#define IRQ_U300_PCM_I2S1_FRAME 12 +#define IRQ_U300_PCM_I2S1_FIFO 13 +#define IRQ_U300_XGAM_GAMCON 14 +#define IRQ_U300_XGAM_CDI 15 +#define IRQ_U300_XGAM_CDICON 16 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) /* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 16 +#define IRQ_U300_XGAM_MMIACC 17 #endif -#define IRQ_U300_XGAM_PDI 17 -#define IRQ_U300_XGAM_PDICON 18 -#define IRQ_U300_XGAM_GAMEACC 19 -#define IRQ_U300_XGAM_MCIDCT 20 -#define IRQ_U300_APEX 21 -#define IRQ_U300_UART0 22 -#define IRQ_U300_SPI 23 -#define IRQ_U300_TIMER_APP_OS 24 -#define IRQ_U300_TIMER_APP_DD 25 -#define IRQ_U300_TIMER_APP_GP1 26 -#define IRQ_U300_TIMER_APP_GP2 27 -#define IRQ_U300_TIMER_OS 28 -#define IRQ_U300_TIMER_MS 29 -#define IRQ_U300_KEYPAD_KEYBF 30 -#define IRQ_U300_KEYPAD_KEYBR 31 +#define IRQ_U300_XGAM_PDI 18 +#define IRQ_U300_XGAM_PDICON 19 +#define IRQ_U300_XGAM_GAMEACC 20 +#define IRQ_U300_XGAM_MCIDCT 21 +#define IRQ_U300_APEX 22 +#define IRQ_U300_UART0 23 +#define IRQ_U300_SPI 24 +#define IRQ_U300_TIMER_APP_OS 25 +#define IRQ_U300_TIMER_APP_DD 26 +#define IRQ_U300_TIMER_APP_GP1 27 +#define IRQ_U300_TIMER_APP_GP2 28 +#define IRQ_U300_TIMER_OS 29 +#define IRQ_U300_TIMER_MS 30 +#define IRQ_U300_KEYPAD_KEYBF 31 +#define IRQ_U300_KEYPAD_KEYBR 32 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 32 -#define IRQ_U300_GPIO_PORT1 33 -#define IRQ_U300_GPIO_PORT2 34 +#define IRQ_U300_GPIO_PORT0 33 +#define IRQ_U300_GPIO_PORT1 34 +#define IRQ_U300_GPIO_PORT2 35 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 35 -#define IRQ_U300_EVHIST 36 -#define IRQ_U300_MSPRO 37 -#define IRQ_U300_MMCSD_MCIINTR0 38 -#define IRQ_U300_MMCSD_MCIINTR1 39 -#define IRQ_U300_I2C0 40 -#define IRQ_U300_I2C1 41 -#define IRQ_U300_RTC 42 -#define IRQ_U300_NFIF 43 -#define IRQ_U300_NFIF2 44 +#define IRQ_U300_WDOG 36 +#define IRQ_U300_EVHIST 37 +#define IRQ_U300_MSPRO 38 +#define IRQ_U300_MMCSD_MCIINTR0 39 +#define IRQ_U300_MMCSD_MCIINTR1 40 +#define IRQ_U300_I2C0 41 +#define IRQ_U300_I2C1 42 +#define IRQ_U300_RTC 43 +#define IRQ_U300_NFIF 44 +#define IRQ_U300_NFIF2 45 #endif /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 45 +#define U300_VIC_IRQS_END 46 #endif /* The DB3350-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS335 -#define IRQ_U300_ISP_F0 45 -#define IRQ_U300_ISP_F1 46 -#define IRQ_U300_ISP_F2 47 -#define IRQ_U300_ISP_F3 48 -#define IRQ_U300_ISP_F4 49 -#define IRQ_U300_GPIO_PORT3 50 -#define IRQ_U300_SYSCON_PLL_LOCK 51 -#define IRQ_U300_UART1 52 -#define IRQ_U300_GPIO_PORT4 53 -#define IRQ_U300_GPIO_PORT5 54 -#define IRQ_U300_GPIO_PORT6 55 -#define U300_VIC_IRQS_END 56 +#define IRQ_U300_ISP_F0 46 +#define IRQ_U300_ISP_F1 47 +#define IRQ_U300_ISP_F2 48 +#define IRQ_U300_ISP_F3 49 +#define IRQ_U300_ISP_F4 50 +#define IRQ_U300_GPIO_PORT3 51 +#define IRQ_U300_SYSCON_PLL_LOCK 52 +#define IRQ_U300_UART1 53 +#define IRQ_U300_GPIO_PORT4 54 +#define IRQ_U300_GPIO_PORT5 55 +#define IRQ_U300_GPIO_PORT6 56 +#define U300_VIC_IRQS_END 57 #endif /* The DB3210-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 35 -#define IRQ_U300_GPIO_PORT4 36 -#define IRQ_U300_WDOG 37 -#define IRQ_U300_EVHIST 38 -#define IRQ_U300_MSPRO 39 -#define IRQ_U300_MMCSD_MCIINTR0 40 -#define IRQ_U300_MMCSD_MCIINTR1 41 -#define IRQ_U300_I2C0 42 -#define IRQ_U300_I2C1 43 -#define IRQ_U300_RTC 44 -#define IRQ_U300_NFIF 45 -#define IRQ_U300_NFIF2 46 -#define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_VIC_IRQS_END 48 +#define IRQ_U300_GPIO_PORT3 36 +#define IRQ_U300_GPIO_PORT4 37 +#define IRQ_U300_WDOG 38 +#define IRQ_U300_EVHIST 39 +#define IRQ_U300_MSPRO 40 +#define IRQ_U300_MMCSD_MCIINTR0 41 +#define IRQ_U300_MMCSD_MCIINTR1 42 +#define IRQ_U300_I2C0 43 +#define IRQ_U300_I2C1 44 +#define IRQ_U300_RTC 45 +#define IRQ_U300_NFIF 46 +#define IRQ_U300_NFIF2 47 +#define IRQ_U300_SYSCON_PLL_LOCK 48 +#define U300_VIC_IRQS_END 49 #endif /* Maximum 8*7 GPIO lines */ @@ -117,6 +117,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END) +#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 880d02ec89d4..ef7099eea0f2 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index 2b2d51caf9d8..0127490218cd 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev, return sprintf(buf, "0x%X\n", mbox_value); } -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); +static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); static int mbox_show(struct seq_file *s, void *data) { diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d2058ef8345f..eff5842f6232 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - gic_raise_softirq(cpumask_of(cpu), 1); + smp_send_reschedule(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index ff1f7cc11f87..80741992a9fc 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -26,18 +26,23 @@ ENTRY(v6_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* - * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103). - * The test below covers all the write situations, including Java bytecodes + * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR. */ - bic r1, r1, #1 << 11 @ clear bit 11 of FSR +#ifdef CONFIG_ARM_ERRATA_326103 + ldr ip, =0x4107b36 + mrc p15, 0, r3, c0, c0, 0 @ get processor id + teq ip, r3, lsr #4 @ r0 ARM1136? + bne do_DataAbort tst r5, #PSR_J_BIT @ Java? + tsteq r5, #PSR_T_BIT @ Thumb? bne do_DataAbort - do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 - ldreq r3, [r4] @ read aborted ARM instruction + bic r1, r1, #1 << 11 @ clear bit 11 of FSR + ldr r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r3, r3 + rev r3, r3 #endif do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. +#endif b do_DataAbort diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index a53fd2aaa2f4..2a8e380501e8 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -32,6 +32,7 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; +static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; struct l2x0_regs l2x0_saved_regs; @@ -61,12 +62,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_PL310_ERRATA_753970 - /* write to an unmmapped register */ - writel_relaxed(0, base + L2X0_DUMMY_REG); -#else - writel_relaxed(0, base + L2X0_CACHE_SYNC); -#endif + writel_relaxed(0, base + sync_reg_offset); cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr) } #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + if (outer_cache.set_debug) + outer_cache.set_debug(val); +} -#define debug_writel(val) outer_cache.set_debug(val) - -static void l2x0_set_debug(unsigned long val) +static void pl310_set_debug(unsigned long val) { writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); } @@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val) { } -#define l2x0_set_debug NULL +#define pl310_set_debug NULL #endif #ifdef CONFIG_PL310_ERRATA_588369 @@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) else ways = 8; type = "L310"; +#ifdef CONFIG_PL310_ERRATA_753970 + /* Unmapped register. */ + sync_reg_offset = L2X0_DUMMY_REG; +#endif + outer_cache.set_debug = pl310_set_debug; break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; @@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) outer_cache.flush_all = l2x0_flush_all; outer_cache.inv_all = l2x0_inv_all; outer_cache.disable = l2x0_disable; - outer_cache.set_debug = l2x0_set_debug; printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 595079fa9d1d..8f5813bbffb5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid); #endif #ifndef CONFIG_SPARSEMEM -static void arm_memory_present(void) +static void __init arm_memory_present(void) { } #else -static void arm_memory_present(void) +static void __init arm_memory_present(void) { struct memblock_region *reg; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b86f8933ff91..2c7cf2f9c837 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr, } } -static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, - unsigned long phys, const struct mem_type *type) +static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys, const struct mem_type *type) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ecdb3da0dea9..c58d896cd5c3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -916,6 +916,13 @@ void omap_start_dma(int lch) l |= OMAP_DMA_CCR_BUFFERING_DISABLE; l |= OMAP_DMA_CCR_EN; + /* + * As dma_write() uses IO accessors which are weakly ordered, there + * is no guarantee that data in coherent DMA memory will be visible + * to the DMA device. Add a memory barrier here to ensure that any + * such data is visible prior to enabling DMA. + */ + mb(); p->dma_write(l, CCR, lch); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; @@ -965,6 +972,13 @@ void omap_stop_dma(int lch) p->dma_write(l, CCR, lch); } + /* + * Ensure that data transferred by DMA is visible to any access + * after DMA has been disabled. This is important for coherent + * DMA regions. + */ + mb(); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[dma_lch_count]; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8070145ccb98..3f26db4ee8e6 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields { * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @srst_udelay: Delay needed after doing a softreset in usecs * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported * @clockact: the default value of the module CLOCKACTIVITY bits @@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig { u16 sysc_offs; u16 syss_offs; u16 sysc_flags; + struct omap_hwmod_sysc_fields *sysc_fields; + u8 srst_udelay; u8 idlemodes; u8 clockact; - struct omap_hwmod_sysc_fields *sysc_fields; }; /** diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index eec98afa0f83..f9a8c5341ee9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -#ifdef CONFIG_PM void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; @@ -358,17 +357,18 @@ void omap3_sram_restore_context(void) omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_OMAP3 */ static inline int omap34xx_sram_init(void) { -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) omap3_sram_restore_context(); -#endif return 0; } +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ static inline int am33xx_sram_init(void) { diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 317e246ffc56..e834c5ef437c 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,6 +18,8 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include <plat/devs.h> + struct platform_device; struct mmc_host; struct mmc_card; @@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { } #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ +static inline void s3c_sdhci_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S3C_DEV_HSMMC + case 0: + s3c_device_hsmmc0.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + case 1: + s3c_device_hsmmc1.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + case 2: + s3c_device_hsmmc2.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + case 3: + s3c_device_hsmmc3.name = name; + break; +#endif + } +} + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 858748eaa144..bc683b8219b5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -17,6 +17,8 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/user.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -529,6 +531,103 @@ void vfp_flush_hwstate(struct thread_info *thread) } /* + * Save the current VFP state into the provided structures and prepare + * for entry into a new function (signal handler). + */ +int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + int err = 0; + + /* Ensure that the saved hwstate is up-to-date. */ + vfp_sync_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); + __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + if (err) + return -EFAULT; + + /* Ensure that VFP is disabled. */ + vfp_flush_hwstate(thread); + + /* + * As per the PCS, clear the length and stride bits for function + * entry. + */ + hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK); + + /* + * Disable VFP in the hwstate so that we can detect if it gets + * used. + */ + hwstate->fpexc &= ~FPEXC_EN; + return 0; +} + +/* Sanitise and restore the current VFP state from the provided structures. */ +int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; + + /* + * If VFP has been used, then disable it to avoid corrupting + * the new thread state. + */ + if (hwstate->fpexc & FPEXC_EN) + vfp_flush_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &ufp_exc->fpexc, err); + + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + return err ? -EFAULT : 0; +} + +/* * VFP hardware can lose all context when a CPU goes offline. * As we will be running in SMP mode with CPU hotplug, we will save the * hardware state at every thread switch. We clear our held state when |