Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 132 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
new file mode 100755
index 000000000000..9adfba8f87e6
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+function get_value {
+    local query="${SETTINGS_MAP[$1]}"
+
+    echo $(ethtool -c $NSIM_NETDEV | \
+        awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}')
+}
+
+function update_current_settings {
+    for key in ${!SETTINGS_MAP[@]}; do
+        CURRENT_SETTINGS[$key]=$(get_value $key)
+    done
+    echo ${CURRENT_SETTINGS[@]}
+}
+
+if ! ethtool -h | grep -q coalesce; then
+    echo "SKIP: No --coalesce support in ethtool"
+    exit 4
+fi
+
+NSIM_NETDEV=$(make_netdev)
+
+set -o pipefail
+
+declare -A SETTINGS_MAP=(
+    ["rx-frames-low"]="rx-frame-low"
+    ["tx-frames-low"]="tx-frame-low"
+    ["rx-frames-high"]="rx-frame-high"
+    ["tx-frames-high"]="tx-frame-high"
+    ["rx-usecs"]="rx-usecs"
+    ["rx-frames"]="rx-frames"
+    ["rx-usecs-irq"]="rx-usecs-irq"
+    ["rx-frames-irq"]="rx-frames-irq"
+    ["tx-usecs"]="tx-usecs"
+    ["tx-frames"]="tx-frames"
+    ["tx-usecs-irq"]="tx-usecs-irq"
+    ["tx-frames-irq"]="tx-frames-irq"
+    ["stats-block-usecs"]="stats-block-usecs"
+    ["pkt-rate-low"]="pkt-rate-low"
+    ["rx-usecs-low"]="rx-usecs-low"
+    ["tx-usecs-low"]="tx-usecs-low"
+    ["pkt-rate-high"]="pkt-rate-high"
+    ["rx-usecs-high"]="rx-usecs-high"
+    ["tx-usecs-high"]="tx-usecs-high"
+    ["sample-interval"]="sample-interval"
+)
+
+declare -A CURRENT_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+declare -A EXPECTED_SETTINGS=(
+    ["rx-frames-low"]=""
+    ["tx-frames-low"]=""
+    ["rx-frames-high"]=""
+    ["tx-frames-high"]=""
+    ["rx-usecs"]=""
+    ["rx-frames"]=""
+    ["rx-usecs-irq"]=""
+    ["rx-frames-irq"]=""
+    ["tx-usecs"]=""
+    ["tx-frames"]=""
+    ["tx-usecs-irq"]=""
+    ["tx-frames-irq"]=""
+    ["stats-block-usecs"]=""
+    ["pkt-rate-low"]=""
+    ["rx-usecs-low"]=""
+    ["tx-usecs-low"]=""
+    ["pkt-rate-high"]=""
+    ["rx-usecs-high"]=""
+    ["tx-usecs-high"]=""
+    ["sample-interval"]=""
+)
+
+# populate the expected settings map
+for key in ${!SETTINGS_MAP[@]}; do
+    EXPECTED_SETTINGS[$key]=$(get_value $key)
+done
+
+# test
+for key in ${!SETTINGS_MAP[@]}; do
+    value=$((RANDOM % $((2**32-1))))
+
+    ethtool -C $NSIM_NETDEV "$key" "$value"
+
+    EXPECTED_SETTINGS[$key]="$value"
+    expected=${EXPECTED_SETTINGS[@]}
+    current=$(update_current_settings)
+
+    check $? "$current" "$expected"
+    set +x
+done
+
+# bool settings which ethtool displays on the same line
+ethtool -C $NSIM_NETDEV adaptive-rx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: off")
+check $? "$s" ""
+
+ethtool -C $NSIM_NETDEV adaptive-tx on
+s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on  TX: on")
+check $? "$s" ""
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $((num_passes)) checks"
+    exit 0
+else
+    echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+    exit 1
+fi