Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 39 insertions, 4 deletions

diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh
index bd12ec97a44d..1ccbe804e8e1 100755
--- a/tools/testing/selftests/bpf/test_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tunnel.sh
@@ -24,12 +24,12 @@
 # Root namespace with metadata-mode tunnel + BPF
 # Device names and addresses:
 # 	veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
-# 	tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay)
+# 	tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200, IPv6: 1::22 (overlay)
 #
 # Namespace at_ns0 with native tunnel
 # Device names and addresses:
 # 	veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
-# 	tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay)
+# 	tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100, IPv6: 1::11 (overlay)
 #
 #
 # End-to-end ping packet flow
@@ -250,7 +250,7 @@ add_ipip_tunnel()
 	ip addr add dev $DEV 10.1.1.200/24
 }
 
-add_ipip6tnl_tunnel()
+add_ip6tnl_tunnel()
 {
 	ip netns exec at_ns0 ip addr add ::11/96 dev veth0
 	ip netns exec at_ns0 ip link set dev veth0 up
@@ -262,11 +262,13 @@ add_ipip6tnl_tunnel()
 		ip link add dev $DEV_NS type $TYPE \
 		local ::11 remote ::22
 	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 1::11/96
 	ip netns exec at_ns0 ip link set dev $DEV_NS up
 
 	# root namespace
 	ip link add dev $DEV type $TYPE external
 	ip addr add dev $DEV 10.1.1.200/24
+	ip addr add dev $DEV 1::22/96
 	ip link set dev $DEV up
 }
 
@@ -534,7 +536,7 @@ test_ipip6()
 
 	check $TYPE
 	config_device
-	add_ipip6tnl_tunnel
+	add_ip6tnl_tunnel
 	ip link set dev veth1 mtu 1500
 	attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
 	# underlay
@@ -553,6 +555,34 @@ test_ipip6()
         echo -e ${GREEN}"PASS: $TYPE"${NC}
 }
 
+test_ip6ip6()
+{
+	TYPE=ip6tnl
+	DEV_NS=ip6ip6tnl00
+	DEV=ip6ip6tnl11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ip6tnl_tunnel
+	ip link set dev veth1 mtu 1500
+	attach_bpf $DEV ip6ip6_set_tunnel ip6ip6_get_tunnel
+	# underlay
+	ping6 $PING_ARG ::11
+	# ip6 over ip6
+	ping6 $PING_ARG 1::11
+	check_err $?
+	ip netns exec at_ns0 ping6 $PING_ARG 1::22
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
 setup_xfrm_tunnel()
 {
 	auth=0x$(printf '1%.0s' {1..40})
@@ -646,6 +676,7 @@ cleanup()
 	ip link del veth1 2> /dev/null
 	ip link del ipip11 2> /dev/null
 	ip link del ipip6tnl11 2> /dev/null
+	ip link del ip6ip6tnl11 2> /dev/null
 	ip link del gretap11 2> /dev/null
 	ip link del ip6gre11 2> /dev/null
 	ip link del ip6gretap11 2> /dev/null
@@ -742,6 +773,10 @@ bpf_tunnel_test()
 	test_ipip6
 	errors=$(( $errors + $? ))
 
+	echo "Testing IP6IP6 tunnel..."
+	test_ip6ip6
+	errors=$(( $errors + $? ))
+
 	echo "Testing IPSec tunnel..."
 	test_xfrm_tunnel
 	errors=$(( $errors + $? ))