Merge 6.2-rc5 into tty-next

We need the serial/tty changes into this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 54 insertions, 35 deletions

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 314a05e009df..64770c62bbec 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -43,6 +43,12 @@
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
+#define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
+#define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
+#define PCI_DEVICE_ID_SEALEVEL_780xC		0x1008
+#define PCI_DEVICE_ID_SEALEVEL_716xC		0x1010
+
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
@@ -638,6 +644,8 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
 	else if (board->num_ports)
 		nr_ports = board->num_ports;
+	else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
+		nr_ports = pcidev->device & 0xff;
 	else
 		nr_ports = pcidev->device & 0x0f;
 
@@ -864,6 +872,12 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
+
+	EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d75c39f4622b..d8c2f3455eeb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1466,6 +1466,10 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count = uap->fifosize >> 1;
 
+	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+	    !uap->rs485_tx_started)
+		pl011_rs485_tx_start(uap);
+
 	if (uap->port.x_char) {
 		if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
 			return true;
@@ -1477,10 +1481,6 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 		return false;
 	}
 
-	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
-	    !uap->rs485_tx_started)
-		pl011_rs485_tx_start(uap);
-
 	/* If we are using DMA mode, try to send some characters. */
 	if (pl011_dma_tx_irq(uap))
 		return true;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f1c06e12efa0..9cd7479b03c0 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2657,13 +2657,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 	else if (mr == ATMEL_US_PAR_ODD)
 		*parity = 'o';
 
-	/*
-	 * The serial core only rounds down when matching this to a
-	 * supported baud rate. Make sure we don't end up slightly
-	 * lower than one of those, as it would make us fall through
-	 * to a much lower baud rate than we really want.
-	 */
-	*baud = port->uartclk / (16 * (quot - 1));
+	*baud = port->uartclk / (16 * quot);
 }
 
 static int __init atmel_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index a3ed9b34e2ab..7ce7bb164005 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -171,6 +171,7 @@ static int configure_kgdboc(void)
 	int err = -ENODEV;
 	char *cptr = config;
 	struct console *cons;
+	int cookie;
 
 	if (!strlen(config) || isspace(config[0])) {
 		err = 0;
@@ -189,20 +190,9 @@ static int configure_kgdboc(void)
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
-	/*
-	 * tty_find_polling_driver() can call uart_set_options()
-	 * (via poll_init) to configure the uart. Take the console_list_lock
-	 * in order to synchronize against register_console(), which can also
-	 * configure the uart via uart_set_options(). This also allows safe
-	 * traversal of the console list.
-	 */
-	console_list_lock();
-
 	p = tty_find_polling_driver(cptr, &tty_line);
-	if (!p) {
-		console_list_unlock();
+	if (!p)
 		goto noconfig;
-	}
 
 	/*
 	 * Take console_lock to serialize device() callback with
@@ -211,7 +201,8 @@ static int configure_kgdboc(void)
 	 */
 	console_lock();
 
-	for_each_console(cons) {
+	cookie = console_srcu_read_lock();
+	for_each_console_srcu(cons) {
 		int idx;
 		if (cons->device && cons->device(cons, &idx) == p &&
 		    idx == tty_line) {
@@ -219,11 +210,10 @@ static int configure_kgdboc(void)
 			break;
 		}
 	}
+	console_srcu_read_unlock(cookie);
 
 	console_unlock();
 
-	console_list_unlock();
-
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 3d54a43768cd..9576ba8bbc40 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -749,7 +749,7 @@ static void pch_dma_tx_complete(void *arg)
 		uart_xmit_advance(port, sg_dma_len(sg));
 
 	async_tx_ack(priv->desc_tx);
-	dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
+	dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
 	priv->nent = 0;
 	priv->orig_nent = 0;
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index c1aea9d1dc16..d98e0a8aae7c 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1043,9 +1043,10 @@ out_unlock:
 	return IRQ_HANDLED;
 }
 
-static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
+static int setup_fifos(struct qcom_geni_serial_port *port)
 {
 	struct uart_port *uport;
+	u32 old_rx_fifo_depth = port->rx_fifo_depth;
 
 	uport = &port->uport;
 	port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
@@ -1053,6 +1054,16 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
 	port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
 	uport->fifosize =
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
+
+	if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
+		port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo,
+					      port->rx_fifo_depth * sizeof(u32),
+					      GFP_KERNEL);
+		if (!port->rx_fifo)
+			return -ENOMEM;
+	}
+
+	return 0;
 }
 
 
@@ -1069,6 +1080,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 	u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
 	u32 proto;
 	u32 pin_swap;
+	int ret;
 
 	proto = geni_se_read_proto(&port->se);
 	if (proto != GENI_SE_UART) {
@@ -1078,7 +1090,9 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 
 	qcom_geni_serial_stop_rx(uport);
 
-	get_tx_fifo_size(port);
+	ret = setup_fifos(port);
+	if (ret)
+		return ret;
 
 	writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
 
@@ -1694,7 +1708,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
+static int qcom_geni_serial_sys_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
@@ -1711,7 +1725,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
 	return uart_suspend_port(private_data->drv, uport);
 }
 
-static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
+static int qcom_geni_serial_sys_resume(struct device *dev)
 {
 	int ret;
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
@@ -1769,10 +1783,12 @@ static const struct qcom_geni_device_data qcom_geni_uart_data = {
 };
 
 static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
-					qcom_geni_serial_sys_resume)
-	.restore = qcom_geni_serial_sys_hib_resume,
-	.thaw = qcom_geni_serial_sys_hib_resume,
+	.suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.resume = pm_sleep_ptr(qcom_geni_serial_sys_resume),
+	.freeze = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.poweroff = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.restore = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
+	.thaw = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
 };
 
 static const struct of_device_id qcom_geni_serial_match_table[] = {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 8633252339f4..2bd32c8ece39 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2211,6 +2211,9 @@ EXPORT_SYMBOL_GPL(uart_parse_options);
  * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
  * @bits: number of data bits
  * @flow: flow control character - 'r' (rts)
+ *
+ * Locking: Caller must hold console_list_lock in order to serialize
+ * early initialization of the serial-console lock.
  */
 int
 uart_set_options(struct uart_port *port, struct console *co,
@@ -2618,7 +2621,9 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 
 	if (!ret && options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
+		console_list_lock();
 		ret = uart_set_options(port, NULL, baud, parity, bits, flow);
+		console_list_unlock();
 	}
 out:
 	mutex_unlock(&tport->mutex);