Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
index 243f421abcb4..f144547cf76c 100644
--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -45,7 +45,7 @@
 #define REG_SDIO0XIN_CLKCTL	0x0158
 #define REG_SDIO1XIN_CLKCTL	0x015c
 
-#define	MAX_CLKS 27
+#define	MAX_CLKS 28
 static struct clk *clks[MAX_CLKS];
 static struct clk_onecell_data clk_data;
 static DEFINE_SPINLOCK(lock);
@@ -356,13 +356,13 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 			    gd->bit_idx, 0, &lock);
 	}
 
-	/*
-	 * twdclk is derived from cpu/3
-	 * TODO: use cpupll until cpuclk is not available
-	 */
+	/* cpuclk divider is fixed to 1 */
+	clks[CLKID_CPU] =
+		clk_register_fixed_factor(NULL, "cpu", clk_names[CPUPLL],
+					  0, 1, 1);
+	/* twdclk is derived from cpu/3 */
 	clks[CLKID_TWD] =
-		clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL],
-					  0, 1, 3);
+		clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
 
 	/* check for errors on leaf clocks */
 	for (n = 0; n < MAX_CLKS; n++) {