Backmerge v5.5-rc7 into drm-next

msm needs 5.5-rc4, go to the latest.

Signed-off-by: Dave Airlie <airlied@redhat.com>

6 files changed, 125 insertions, 44 deletions

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index f41744b9b38a..66a570d0da83 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -76,8 +76,7 @@ enum brcm_ahci_version {
 };
 
 enum brcm_ahci_quirks {
-	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
-	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(0),
 };
 
 struct brcm_ahci_priv {
@@ -213,19 +212,12 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 			brcm_sata_phy_disable(priv, i);
 }
 
-static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv,
 				  struct brcm_ahci_priv *priv)
 {
-	void __iomem *ahci;
-	struct resource *res;
 	u32 impl;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
-	ahci = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ahci))
-		return 0;
-
-	impl = readl(ahci + HOST_PORTS_IMPL);
+	impl = readl(hpriv->mmio + HOST_PORTS_IMPL);
 
 	if (fls(impl) > SATA_TOP_MAX_PHYS)
 		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
@@ -233,9 +225,6 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 	else if (!impl)
 		dev_info(priv->dev, "no ports found\n");
 
-	devm_iounmap(&pdev->dev, ahci);
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
-
 	return impl;
 }
 
@@ -285,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 	/* Perform the SATA PHY reset sequence */
 	brcm_sata_phy_disable(priv, ap->port_no);
 
+	/* Reset the SATA clock */
+	ahci_platform_disable_clks(hpriv);
+	msleep(10);
+
+	ahci_platform_enable_clks(hpriv);
+	msleep(10);
+
 	/* Bring the PHY back on */
 	brcm_sata_phy_enable(priv, ap->port_no);
 
@@ -347,11 +343,10 @@ static int brcm_ahci_suspend(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
-	int ret;
 
-	ret = ahci_platform_suspend(dev);
 	brcm_sata_phys_disable(priv);
-	return ret;
+
+	return ahci_platform_suspend(dev);
 }
 
 static int brcm_ahci_resume(struct device *dev)
@@ -359,11 +354,44 @@ static int brcm_ahci_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	/* Make sure clocks are turned on before re-configuration */
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		return ret;
 
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
-	return ahci_platform_resume(dev);
+
+	/* Since we had to enable clocks earlier on, we cannot use
+	 * ahci_platform_resume() as-is since a second call to
+	 * ahci_platform_enable_resources() would bump up the resources
+	 * (regulators, clocks, PHYs) count artificially so we copy the part
+	 * after ahci_platform_enable_resources().
+	 */
+	ret = ahci_platform_enable_phys(hpriv);
+	if (ret)
+		goto out_disable_phys;
+
+	ret = ahci_platform_resume_host(dev);
+	if (ret)
+		goto out_disable_platform_phys;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_clks(hpriv);
+	return ret;
 }
 #endif
 
@@ -410,44 +438,71 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(priv->rcdev))
 		reset_control_deassert(priv->rcdev);
 
-	if ((priv->version == BRCM_SATA_BCM7425) ||
-		(priv->version == BRCM_SATA_NSP)) {
-		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+	hpriv = ahci_platform_get_resources(pdev, 0);
+	if (IS_ERR(hpriv)) {
+		ret = PTR_ERR(hpriv);
+		goto out_reset;
+	}
+
+	hpriv->plat_data = priv;
+	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO;
+
+	switch (priv->version) {
+	case BRCM_SATA_BCM7425:
+		hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE;
+		/* fall through */
+	case BRCM_SATA_NSP:
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
 		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+		break;
+	default:
+		break;
 	}
 
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		goto out_reset;
+
+	/* Must be first so as to configure endianness including that
+	 * of the standard AHCI register space.
+	 */
 	brcm_sata_init(priv);
 
-	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
-	if (!priv->port_mask)
-		return -ENODEV;
+	/* Initializes priv->port_mask which is used below */
+	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
+	if (!priv->port_mask) {
+		ret = -ENODEV;
+		goto out_disable_clks;
+	}
 
+	/* Must be done before ahci_platform_enable_phys() */
 	brcm_sata_phys_enable(priv);
 
-	hpriv = ahci_platform_get_resources(pdev, 0);
-	if (IS_ERR(hpriv))
-		return PTR_ERR(hpriv);
-	hpriv->plat_data = priv;
-	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
-
 	brcm_sata_alpm_init(hpriv);
 
-	ret = ahci_platform_enable_resources(hpriv);
+	ret = ahci_platform_enable_phys(hpriv);
 	if (ret)
-		return ret;
-
-	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
-		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
-	hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
+		goto out_disable_phys;
 
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
-		return ret;
+		goto out_disable_platform_phys;
 
 	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 
 	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+out_disable_clks:
+	ahci_platform_disable_clks(hpriv);
+out_reset:
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_assert(priv->rcdev);
+	return ret;
 }
 
 static int brcm_ahci_remove(struct platform_device *pdev)
@@ -457,12 +512,12 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;
 
+	brcm_sata_phys_disable(priv);
+
 	ret = ata_platform_remove_one(pdev);
 	if (ret)
 		return ret;
 
-	brcm_sata_phys_disable(priv);
-
 	return 0;
 }
 
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 8befce036af8..129556fcf6be 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_ops);
  * RETURNS:
  * 0 on success otherwise a negative error code
  */
-static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
+int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 {
 	int rc, i;
 
@@ -74,6 +74,7 @@ disable_phys:
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
 
 /**
  * ahci_platform_disable_phys - Disable PHYs
@@ -81,7 +82,7 @@ disable_phys:
  *
  * This function disables all PHYs found in hpriv->phys.
  */
-static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
+void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 {
 	int i;
 
@@ -90,6 +91,7 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 		phy_exit(hpriv->phys[i]);
 	}
 }
+EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
 
 /**
  * ahci_platform_enable_clks - Enable platform clocks
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e9017c570bc5..6f4ab5c5b52d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5329,6 +5329,30 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 }
 
 /**
+ *	ata_qc_get_active - get bitmask of active qcs
+ *	@ap: port in question
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Bitmask of active qcs
+ */
+u64 ata_qc_get_active(struct ata_port *ap)
+{
+	u64 qc_active = ap->qc_active;
+
+	/* ATA_TAG_INTERNAL is sent to hw as tag 0 */
+	if (qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+		qc_active |= (1 << 0);
+		qc_active &= ~(1ULL << ATA_TAG_INTERNAL);
+	}
+
+	return qc_active;
+}
+EXPORT_SYMBOL_GPL(ata_qc_get_active);
+
+/**
  *	ata_qc_complete_multiple - Complete multiple qcs successfully
  *	@ap: port in question
  *	@qc_active: new qc_active mask
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 9239615d8a04..d55ee244d693 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1280,7 +1280,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 				     i, ioread32(hcr_base + CC),
 				     ioread32(hcr_base + CA));
 		}
-		ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+		ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 		return;
 
 	} else if ((ap->qc_active & (1ULL << ATA_TAG_INTERNAL))) {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 277f11909fc1..d7228f8e9297 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2829,7 +2829,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp
 	}
 
 	if (work_done) {
-		ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+		ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 
 		/* Update the software queue position index in hardware */
 		writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f3e62f5528bd..eb9dc14e5147 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -984,7 +984,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 					check_commands = 0;
 				check_commands &= ~(1 << pos);
 			}
-			ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+			ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 		}
 	}