cpufreq: Use per-policy frequency QoS

Replace the CPU device PM QoS used for the management of min and max
frequency constraints in cpufreq (and its users) with per-policy
frequency QoS to avoid problems with cpufreq policies covering
more then one CPU.

Namely, a cpufreq driver is registered with the subsys interface
which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
currently the PM QoS notifiers are added to the first CPU in the
policy (i.e. CPU0 in the majority of cases).

In turn, when the cpufreq driver is unregistered, the subsys interface
doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
called for the last CPU in the policy, say CPUx, which as a rule is
not CPU0 if the policy covers more than one CPU.  Then, the PM QoS
notifiers cannot be removed, because CPUx does not have them, and
they are still there in the device PM QoS notifiers list of CPU0,
which prevents new PM QoS notifiers from being registered for CPU0
on the next attempt to register the cpufreq driver.

The same issue occurs when the first CPU in the policy goes offline
before unregistering the driver.

After this change it does not matter which CPU is the policy CPU at
the driver registration time and whether or not it is online all the
time, because the frequency QoS is per policy and not per CPU.

Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 8227c7dd75b1..c77a5b1fb107 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -105,7 +105,7 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 
 		pr = per_cpu(processors, i);
 
-		if (unlikely(!dev_pm_qos_request_active(&pr->thermal_req)))
+		if (unlikely(!freq_qos_request_active(&pr->thermal_req)))
 			continue;
 
 		policy = cpufreq_cpu_get(i);
@@ -116,7 +116,7 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 
 		cpufreq_cpu_put(policy);
 
-		ret = dev_pm_qos_update_request(&pr->thermal_req, max_freq);
+		ret = freq_qos_update_request(&pr->thermal_req, max_freq);
 		if (ret < 0) {
 			pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n",
 				pr->id, ret);
@@ -125,28 +125,28 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 	return 0;
 }
 
-void acpi_thermal_cpufreq_init(int cpu)
+void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy)
 {
+	int cpu = policy->cpu;
 	struct acpi_processor *pr = per_cpu(processors, cpu);
 	int ret;
 
 	if (!pr)
 		return;
 
-	ret = dev_pm_qos_add_request(get_cpu_device(cpu),
-				     &pr->thermal_req, DEV_PM_QOS_MAX_FREQUENCY,
-				     INT_MAX);
+	ret = freq_qos_add_request(&policy->constraints, &pr->thermal_req,
+				   FREQ_QOS_MAX, INT_MAX);
 	if (ret < 0)
 		pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu,
 		       ret);
 }
 
-void acpi_thermal_cpufreq_exit(int cpu)
+void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy)
 {
-	struct acpi_processor *pr = per_cpu(processors, cpu);
+	struct acpi_processor *pr = per_cpu(processors, policy->cpu);
 
 	if (pr)
-		dev_pm_qos_remove_request(&pr->thermal_req);
+		freq_qos_remove_request(&pr->thermal_req);
 }
 #else				/* ! CONFIG_CPU_FREQ */
 static int cpufreq_get_max_state(unsigned int cpu)