Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These updates are all for board specific code, including

   - defconfig updates for shmobile, davinci, bcm2835, imx, omap and
     tegra

   - SD/MMC and I2C support on bcm2835 (Raspberry PI)

   - minor updates for PXA

   - shmobile updates to GPIO usage in board files

   - More things in OMAP board files are moved over to device tree
     probing

   - Better support for audio devices on some OMAP platforms"

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: imx_v4_v5_defconfig: Add VPU support
  ARM: imx: configs: enable netfilter support
  ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
  ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
  RX-51: Register twl4030-madc device
  RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
  ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
  ARM: OMAP1: nokia770: enable CBUS/Retu
  ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
  ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
  ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
  ARM: OMAP2+: craneboard: support the TPS65910 PMU
  ARM: OMAP2+: craneboard: support NAND device
  ARM: OMAP3: cm-t3517: add MMC support
  ARM: OMAP2+: Remove apollon board support
  ARM: shmobile: armadillo800eva: set clock rates before timer init
  ARM: tegra: defconfig updates
  ARM: shmobile: mackerel: Use gpio_request_one()
  ARM: shmobile: kzm9g: Use gpio_request_one()
  ARM: shmobile: bonito: Use gpio_request_one()
  ...

1 files changed, 8 insertions, 14 deletions

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 705bc63c7984..8ff53a19c48c 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	static int power_gpio = -EINVAL;
 
 	if (power_gpio < 0) {
-		int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
-		if (!ret) {
+		int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+					   "sdhi1_power");
+		if (!ret)
 			power_gpio = GPIO_PORT114;
-			gpio_direction_output(power_gpio, 0);
-		}
 	}
 
 	/*
@@ -604,14 +603,11 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
+	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* enable SMSC911X */
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
+	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* FSI A */
 	gpio_request(GPIO_FN_FSIACK, NULL);
@@ -626,15 +622,13 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
 
 	/* LCD panel */
-	gpio_request(GPIO_PORT217, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT217, 0);
+	gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	mdelay(1);
 	gpio_set_value(GPIO_PORT217, 1);
 	mdelay(100);
 
 	/* LCD backlight controller */
-	gpio_request(GPIO_PORT235, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT235, 0);
+	gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	lcd_backlight_set_brightness(0);
 
 	/* enable SDHI0 on CN15 [SD I/F] */