Merge tag 'v3.8-rc5' into x86/mm

The __pa() fixup series that follows touches KVM code that is not
present in the existing branch based on v3.7-rc5, so merge in the
current upstream from Linus.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

1 files changed, 0 insertions, 41 deletions

diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f80e734..9f6f496380d8 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -13,59 +13,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF	24
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ib62x0_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP22_GPIO,	/* OS LED red */
-	MPP24_GPIO,	/* Power off device */
-	MPP25_GPIO,	/* OS LED green */
-	MPP27_GPIO,	/* USB transfer LED */
-	MPP28_GPIO,	/* Reset button */
-	MPP29_GPIO,	/* USB Copy button */
-	0
-};
-
-static void ib62x0_power_off(void)
-{
-	gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
 void __init ib62x0_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ib62x0_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&ib62x0_ge00_data);
-	if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
-	    gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = ib62x0_power_off;
-	else
-		pr_err("board-ib62x0: failed to configure power-off GPIO\n");
 }