Merge commit 'v2.6.34-rc1' into perf/urgent

Conflicts:
	tools/perf/util/probe-event.c

Merge reason: Pick up -rc1 and resolve the conflict as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

3 files changed, 58 insertions, 1 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597bd2bd..bfcbbf88c44d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -482,6 +482,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     reference_rate	- reference sample rate, 44100 or 48000 (default)
     multiple		- multiple to ref. sample rate, 1 or 2 (default)
+    subsystem		- override the PCI SSID for probing; the value
+			  consists of SSVID << 16 | SSDID.  The default is
+			  zero, which means no override.
 
     This module supports multiple cards.
 
@@ -1123,6 +1126,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards, autoprobe and ISA PnP.
 
+  Module snd-jazz16
+  -------------------
+
+    Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+    MVD1216 + MVA416 + MVA514.
+
+    port	- port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+    irq		- IRQ # for SB DSP chip (3,5,7,9,10,15)
+    dma8	- DMA # for SB DSP chip (1,3)
+    dma16	- DMA # for SB DSP chip (5,7)
+    mpu_port	- MPU-401 port # (0x300,0x310,0x320,0x330)
+    mpu_irq	- MPU-401 irq # (2,3,5,7)
+
+    This module supports multiple cards.
+
   Module snd-korg1212
   -------------------
 
@@ -1791,6 +1809,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-ua101
+  ----------------
+
+    Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
+
+    This module supports multiple devices, autoprobe and hotplugging.
+
   Module snd-usb-audio
   --------------------
 
@@ -1923,7 +1948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
     (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e72cee9e2a71..1d38b0dfba95 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -124,6 +124,8 @@ ALC882/883/885/888/889
   asus-a7m	ASUS A7M
   macpro	MacPro support
   mb5		Macbook 5,1
+  macmini3	Macmini 3,1
+  mba21		Macbook Air 2,1
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   imac91	iMac 9,1
@@ -279,13 +281,16 @@ Conexant 5051
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
   hp-dv6736	HP dv6736
+  hp-f700	HP Compaq Presario F700
   lenovo-x200	Lenovo X200 laptop
+  toshiba	Toshiba Satellite M300
 
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
   dell-laptop	Dell laptops
   olpc-xo-1_5	OLPC XO 1.5
+  ideapad       Lenovo IdeaPad U150
 
 STAC9200
 ========
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 6325bec06a72..f4dd3bf99d12 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -452,6 +452,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs`
 sysfs entries, and the lines after `[hint]` are parsed as `hints`
 sysfs entries, respectively.
 
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [vendor_id]
+  0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [subsystem_id]
+  0xffff1111
+
+  [revision_id]
+  0x10
+
+  [chip_name]
+  My-own NEWS-0002
+------------------------------------------------------------------------
+
 The hd-audio driver reads the file via request_firmware().  Thus,
 a patch file has to be located on the appropriate firmware path,
 typically, /lib/firmware.  For example, when you pass the option