summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powernv/pci.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy2022-05-081-1/+0
| | | | | | | | | | | Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
* PCI: Add defines for normal and subtractive PCI bridgesPali Rohár2022-02-171-1/+1
| | | | | | | | | | | | | | | Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* powerpc/powernv/pci: Drop unused MSI codeCédric Le Goater2021-08-101-67/+0
| | | | | | | | | MSIs should be fully managed by the PCI and IRQ subsystems now. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-26-clg@kaod.org
* powerpc/powernv/pci: fix header guardNick Desaulniers2021-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | While looking at -Wundef warnings, the #if CONFIG_EEH stood out as a possible candidate to convert to #ifdef CONFIG_EEH. It seems that based on Kconfig dependencies it's not possible to build this file without CONFIG_EEH enabled, but based on upstream discussion, it's not clear yet that CONFIG_EEH should be enabled by default. For now, simply fix the -Wundef warning. Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/570 Link: https://lore.kernel.org/lkml/67f6cd269684c9aa8463ff4812c3b4605e6739c3.camel@perches.com/ Link: https://lore.kernel.org/lkml/CAOSf1CGoN5R0LUrU=Y=UWho1Z_9SLgCX8s3SbFJXwJXc5BYz4A@mail.gmail.com/ Link: https://lore.kernel.org/r/20210518204044.2390064-1-ndesaulniers@google.com
* powerpc/powernv: remove the nvlink supportChristoph Hellwig2021-05-021-11/+0
| | | | | | | | | | | | This code was only used by the vfio-nvlink2 code, which itself had no proper use. Drop this huge chunk of code build into every powernv or generic build. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de
* powerpc/powernv/pci: Add pci_bus_to_pnvhb() helperOliver O'Halloran2020-07-261-10/+4
| | | | | | | | | | | | | | | | | | Add a helper to go from a pci_bus structure to the pnv_phb that hosts that bus. There's a lot of instances of the following pattern: struct pci_controller *hose = pci_bus_to_host(pdev->bus); struct pnv_phb *phb = hose->private_data; Without any other uses of the pci_controller inside the function. This is hard to read since it requires you to memorise the contents of the private data fields and kind of error prone since it involves blindly assigning a void pointer. Add a helper to make it more concise and explicit. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200722065715.1432738-1-oohall@gmail.com
* powerpc/powernv/pci: Add device to iommu group during dma_dev_setup()Oliver O'Halloran2020-05-281-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically adding devices to their respective iommu group has been handled by the post-init phb fixup for most devices. This was done because: 1) The IOMMU group is tied to the PE (usually) so we can only setup the iommu groups after we've done resource allocation since BAR location determines the device's PE, and: 2) The sysfs directory for the pci_dev needs to be available since iommu_add_device() wants to add an attribute for the iommu group. However, since commit 30d87ef8b38d ("powerpc/pci: Fix pcibios_setup_device() ordering") both conditions are met when hose->ops->dma_dev_setup() is called so there's no real need to do this in the fixup. Moving the call to iommu_add_device() into pnv_pci_ioda_dma_setup_dev() is a nice cleanup since it puts all the per-device IOMMU setup into one place. It also results in all (non-nvlink) devices getting their iommu group via a common path rather than relying on the bus notifier hack in pnv_tce_iommu_bus_notifier() to handle the adding VFs and hotplugged devices to their group. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200406030745.24595-5-oohall@gmail.com
* powernv/pci: Move pnv_pci_dma_bus_setup() to pci-ioda.cOliver O'Halloran2020-01-231-20/+0
| | | | | | | | | This is only used in pci-ioda.c so move it there and rename it to match. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200110070207.439-6-oohall@gmail.com
* powernv/pci: Fold pnv_pci_dma_dev_setup() into the pci-ioda.c versionOliver O'Halloran2020-01-231-9/+0
| | | | | | | | | | | | pnv_pci_dma_dev_setup() does nothing but call the phb->dma_dev_setup() callback, if one exists. That callback is only set for normal PCIe PHBs so we can remove the layer of indirection and use the ioda version in the pci_controller_ops. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200110070207.439-5-oohall@gmail.com
* powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()Oliver O'Halloran2020-01-231-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before the pci_dev for the VF is created. We need to set the pe->pdev pointer at some point after the pci_dev is created. Currently we do that in: pcibios_bus_add_device() pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup) /* fixup is done here */ pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup) The fixup needs to be done before setting up DMA for for the VF's PE, but there's no real reason to delay it until this point. Move the fixup into pnv_pci_ioda_fixup_iov() so the ordering is: pcibios_add_device() pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov) pcibios_bus_add_device() ... This isn't strictly required, but it's a slightly more logical place to do the fixup and it simplifies pnv_pci_dma_dev_setup(). Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200110070207.439-4-oohall@gmail.com
* powerpc/powernv/ioda: Find opencapi slot for a device nodeFrederic Barrat2020-01-231-10/+14
| | | | | | | | | | | | | | | Unlike real PCI slots, opencapi slots are directly associated to the (virtual) opencapi PHB, there's no intermediate bridge. So when looking for a slot ID, we must start the search from the device node itself and not its parent. Also, the slot ID is not attached to a specific bdfn, so let's build it from the PHB ID, like skiboot. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-6-fbarrat@linux.ibm.com
* powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE numberOliver O'Halloran2020-01-061-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On pseries there is a bug with adding hotplugged devices to an IOMMU group. For a number of dumb reasons fixing that bug first requires re-working how VFs are configured on PowerNV. For background, on PowerNV we use the pcibios_sriov_enable() hook to do two things: 1. Create a pci_dn structure for each of the VFs, and 2. Configure the PHB's internal BARs so the MMIO range for each VF maps to a unique PE. Roughly speaking a PE is the hardware counterpart to a Linux IOMMU group since all the devices in a PE share the same IOMMU table. A PE also defines the set of devices that should be isolated in response to a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all MMIO and DMA traffic to and from devicein the PE is blocked by the root complex until the PE is recovered by the OS. The requirement to block MMIO causes a giant headache because the P8 PHB generally uses a fixed mapping between MMIO addresses and PEs. As a result we need to delay configuring the IOMMU groups for device until after MMIO resources are assigned. For physical devices (i.e. non-VFs) the PE assignment is done in pcibios_setup_bridge() which is called immediately after the MMIO resources for downstream devices (and the bridge's windows) are assigned. For VFs the setup is more complicated because: a) pcibios_setup_bridge() is not called again when VFs are activated, and b) The pci_dev for VFs are created by generic code which runs after pcibios_sriov_enable() is called. The work around for this is a two step process: 1. A fixup in pcibios_add_device() is used to initialised the cached pe_number in pci_dn, then 2. A bus notifier then adds the device to the IOMMU group for the PE specified in pci_dn->pe_number. A side effect fixing the pseries bug mentioned in the first paragraph is moving the fixup out of pcibios_add_device() and into pcibios_bus_add_device(), which is called much later. This results in step 2. failing because pci_dn->pe_number won't be initialised when the bus notifier is run. We can fix this by removing the need for the fixup. The PE for a VF is known before the VF is even scanned so we can initialise pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately, moving the initialisation causes two problems: 1. We trip the WARN_ON() in the current fixup code, and 2. The EEH core clears pdn->pe_number when recovering a VF and relies on the fixup to correctly re-set it. The only justification for either of these is a comment in eeh_rmv_device() suggesting that pdn->pe_number *must* be set to IODA_INVALID_PE in order for the VF to be scanned. However, this comment appears to have no basis in reality. Both bugs can be fixed by just deleting the code. Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
* powerpc/powernv: Disable native PCIe port managementOliver O'Halloran2019-11-211-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On PowerNV the PCIe topology is (currently) managed by the powernv platform code in Linux in cooperation with the platform firmware. Linux's native PCIe port service drivers operate independently of both and this can cause problems. The main issue is that the portbus driver will conflict with the platform specific hotplug driver (pnv_php) over ownership of the MSI used to notify the host when a hotplug event occurs. The portbus driver claims this MSI on behalf of the individual port services because the same interrupt is used for hotplug events, PMEs (on root ports), and link bandwidth change notifications. The portbus driver will always claim the interrupt even if the individual port service drivers, such as pciehp, are compiled out. The second, bigger, problem is that the hotplug port service driver fundamentally does not work on PowerNV. The platform assumes that all PCI devices have a corresponding arch-specific handle derived from the DT node for the device (pci_dn) and without one the platform will not allow a PCI device to be enabled. This problem is largely due to historical baggage, but it can't be resolved without significant re-factoring of the platform PCI support. We can fix these problems in the interim by setting the "pcie_ports_disabled" flag during platform initialisation. The flag indicates the platform owns the PCIe ports which stops the portbus driver from being registered. This does have the side effect of disabling all port services drivers that is: AER, PME, BW notifications, hotplug, and DPC. However, this is not a huge disadvantage on PowerNV since these services are either unused or handled through other means. Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
* pci-hotplug/pnv_php: Add support for IODA3 Power9 PHBsOliver O'Halloran2019-09-051-1/+2
| | | | | | | | | | | Currently we check that an IODA2 compatible PHB is upstream of this slot. This is mainly to avoid pnv_php creating slots for the various "virtual PHBs" that we create for NVLink. There's no real need for this restriction so allow it on IODA3. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-10-oohall@gmail.com
* Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds2019-07-131-145/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
| * powerpc/powernv: remove the unused tunneling exportsChristoph Hellwig2019-07-011-71/+0
| | | | | | | | | | | | | | | | These have been unused anywhere in the kernel tree ever since they've been added to the kernel. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/powernv: remove the unused pnv_pci_set_p2p functionChristoph Hellwig2019-07-011-74/+0
| | | | | | | | | | | | | | | | | | This function has never been used anywhere in the kernel tree since it was added to the tree. We also now have proper PCIe P2P APIs in the core kernel, and any new P2P support should be using those. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
|/ | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/powernv/sriov: Register IOMMU groups for VFsAlexey Kardashevskiy2019-02-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The compound IOMMU group rework moved iommu_register_group() together in pnv_pci_ioda_setup_iommu_api() (which is a part of ppc_md.pcibios_fixup). As the result, pnv_ioda_setup_bus_iommu_group() does not create groups any more, it only adds devices to groups. This works fine for boot time devices. However IOMMU groups for SRIOV's VFs were added by pnv_ioda_setup_bus_iommu_group() so this got broken: pnv_tce_iommu_bus_notifier() expects a group to be registered for VF and it is not. This adds missing group registration and adds a NULL pointer check into the bus notifier so we won't crash if there is no group, although it is not expected to happen now because of the change above. Example oops seen prior to this patch: $ echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/sriov_numvfs Unable to handle kernel paging request for data at address 0x00000030 Faulting instruction address: 0xc0000000004a6018 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV CPU: 46 PID: 7006 Comm: bash Not tainted 4.15-ish NIP: c0000000004a6018 LR: c0000000004a6014 CTR: 0000000000000000 REGS: c000008fc876b400 TRAP: 0300 Not tainted (4.15-ish) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CFAR: c000000000d0be20 DAR: 0000000000000030 DSISR: 40000000 SOFTE: 1 ... NIP sysfs_do_create_link_sd.isra.0+0x68/0x150 LR sysfs_do_create_link_sd.isra.0+0x64/0x150 Call Trace: pci_dev_type+0x0/0x30 (unreliable) iommu_group_add_device+0x8c/0x600 iommu_add_device+0xe8/0x180 pnv_tce_iommu_bus_notifier+0xb0/0xf0 notifier_call_chain+0x9c/0x110 blocking_notifier_call_chain+0x64/0xa0 device_add+0x524/0x7d0 pci_device_add+0x248/0x450 pci_iov_add_virtfn+0x294/0x3e0 pci_enable_sriov+0x43c/0x580 mlx5_core_sriov_configure+0x15c/0x2f0 [mlx5_core] sriov_numvfs_store+0x180/0x240 dev_attr_store+0x3c/0x60 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1ac/0x240 __vfs_write+0x3c/0x70 vfs_write+0xd8/0x220 SyS_write+0x6c/0x110 system_call+0x58/0x6c Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reported-by: Santwana Samantray <santwana.samantray@in.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/pseries: Rework device adding to IOMMU groupsAlexey Kardashevskiy2018-12-211-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powernv platform registers IOMMU groups and adds devices to them from the pci_controller_ops::setup_bridge() hook except one case when virtual functions (SRIOV VFs) are added from a bus notifier. The pseries platform registers IOMMU groups from the pci_controller_ops::dma_bus_setup() hook and adds devices from the pci_controller_ops::dma_dev_setup() hook. The very same bus notifier used for powernv does not add devices for pseries though as __of_scan_bus() adds devices first, then it does the bus/dev DMA setup. Both platforms use iommu_add_device() which takes a device and expects it to have a valid IOMMU table struct with an iommu_table_group pointer which in turn points the iommu_group struct (which represents an IOMMU group). Although the helper seems easy to use, it relies on some pre-existing device configuration and associated data structures which it does not really need. This simplifies iommu_add_device() to take the table_group pointer directly. Pseries already has a table_group pointer handy and the bus notified is not used anyway. For powernv, this copies the existing bus notifier, makes it work for powernv only which means an easy way of getting to the table_group pointer. This was tested on VFs but should also support physical PCI hotplug. Since iommu_add_device() receives the table_group pointer directly, pseries does not do TCE cache invalidation (the hypervisor does) nor allow multiple groups per a VFIO container (in other words sharing an IOMMU table between partitionable endpoints), this removes iommu_table_group_link from pseries. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Remove PCI_MSI ifdef checksOliver O'Halloran2018-12-211-2/+0
| | | | | | | | | | CONFIG_PCI_MSI was made mandatory by commit a311e738b6d8 ("powerpc/powernv: Make PCI non-optional") so the #ifdef checks around CONFIG_PCI_MSI here can be removed entirely. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/eeh/npu: Fix uninitialized variables in ↵Alexey Kardashevskiy2018-12-201-2/+2
| | | | | | | | | | | | | | opal_pci_eeh_freeze_status The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in skiboot's NPU driver does not touch the pci_error_type parameter so it might have garbage but the powernv code analyzes it nevertheless. This initializes pcierr and fstate to zero in all call sites. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Move TCE manupulation code to its own fileAlexey Kardashevskiy2018-07-161-158/+0
| | | | | | | | | | | | | | | | | | | | Right now we have allocation code in pci-ioda.c and traversing code in pci.c, let's keep them toghether. However both files are big enough already so let's move this business to a new file. While we at it, move the code which links IOMMU table groups to IOMMU tables as it is not specific to any PNV PHB model. These puts exported symbols from the new file together. This fixes several warnings from checkpatch.pl like this: "WARNING: Prefer 'unsigned int' to bare use of 'unsigned'". As this is almost cut-n-paste, there should be no behavioral change. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Enable tunneled operationsPhilippe Bergheaud2018-03-131-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | P9 supports PCI tunneled operations (atomics and as_notify). This patch adds support for tunneled operations on powernv, with a new API, to be called by device drivers: pnv_pci_enable_tunnel() Enable tunnel operations, tell driver the 16-bit ASN indication used by kernel. pnv_pci_disable_tunnel() Disable tunnel operations. pnv_pci_set_tunnel_bar() Tell kernel the Tunnel BAR Response address used by driver. This function uses two new OPAL calls, as the PBCQ Tunnel BAR register is configured by skiboot. pnv_pci_get_as_notify_info() Return the ASN info of the thread to be woken up. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Introduce new PHB type for opencapi linksFrederic Barrat2018-01-241-0/+4
| | | | | | | | | | | | | | | The NPU was already abstracted by opal as a virtual PHB for nvlink, but it helps to be able to differentiate between a nvlink or opencapi PHB, as it's not completely transparent to linux. In particular, PE assignment differs and we'll also need the information in later patches. So rename existing PNV_PHB_NPU type to PNV_PHB_NPU_NVLINK and add a new type PNV_PHB_NPU_OCAPI. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Enable PCI peer-to-peerFrederic Barrat2017-08-081-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P9 has support for PCI peer-to-peer, enabling a device to write in the MMIO space of another device directly, without interrupting the CPU. This patch adds support for it on powernv, by adding a new API to be called by drivers. The pnv_pci_set_p2p(...) call configures an 'initiator', i.e the device which will issue the MMIO operation, and a 'target', i.e. the device on the receiving side. P9 really only supports MMIO stores for the time being but that's expected to change in the future, so the API allows to define both load and store operations. /* PCI p2p descriptor */ #define OPAL_PCI_P2P_ENABLE 0x1 #define OPAL_PCI_P2P_LOAD 0x2 #define OPAL_PCI_P2P_STORE 0x4 int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc) It uses a new OPAL call, as the configuration magic is done on the PHBs by skiboot. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> [mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/pci: Add support for PHB4 diagnosticsRussell Currey2017-06-271-0/+105
| | | | | | | | As with P7IOC and PHB3, add kernel-side support for decoding and printing diagnostic data for PHB4. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/pci: Dynamically allocate PHB diag dataRussell Currey2017-06-271-3/+3
| | | | | | | | | | | | | | | | Diagnostic data for PHBs currently works by allocated a fixed-sized buffer. This is simple, but either wastes memory (though only a few kilobytes) or in the case of PHB4 isn't enough to fit the whole data blob. For machines that don't describe the diagnostic data size in the device tree, use the hardcoded buffer size as before. For those that do, only allocate exactly what's needed. In the special case of P7IOC (which has two types of diag data), the larger should be specified in the device tree. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/pci: Reduce spam when dumping PESTRussell Currey2017-06-271-20/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dumping the PE State Tables (PEST) can be highly verbose if a number of PEs are affected, especially in the case where the whole PHB is frozen and 512 lines get printed. Check for duplicates when dumping the PEST to reduce useless output. For example: PE[0f8] A/B: 9700002600000000 80000080d00000f8 PE[0f9] A/B: 8000000000000000 0000000000000000 PE[..0fe] A/B: as above PE[0ff] A/B: 8440002b00000000 0000000000000000 instead of: PE[0f8] A/B: 9700002600000000 80000080d00000f8 PE[0f9] A/B: 8000000000000000 0000000000000000 PE[0fa] A/B: 8000000000000000 0000000000000000 PE[0fb] A/B: 8000000000000000 0000000000000000 PE[0fc] A/B: 8000000000000000 0000000000000000 PE[0fd] A/B: 8000000000000000 0000000000000000 PE[0fe] A/B: 8000000000000000 0000000000000000 PE[0ff] A/B: 8440002b00000000 0000000000000000 and you can imagine how much worse it can get for 512 PEs. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Check kzalloc() return value in pnv_pci_table_allocAlexey Kardashevskiy2017-04-281-0/+3
| | | | | | | | | | pnv_pci_table_alloc() ignores possible failure from kzalloc_node(), this adds a check. There are 2 callers of pnv_pci_table_alloc(), one already checks for tbl!=NULL, this adds WARN_ON() to the other path which only happens during boot time in IODA1 and not expected to fail. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'topic/ppc-kvm' into nextMichael Ellerman2017-04-281-0/+1
|\ | | | | | | | | Merge the topic branch we were sharing with kvm-ppc, Paul has also merged it.
| * powerpc/vfio_spapr_tce: Add reference counting to iommu_tableAlexey Kardashevskiy2017-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far iommu_table obejcts were only used in virtual mode and had a single owner. We are going to change this by implementing in-kernel acceleration of DMA mapping requests. The proposed acceleration will handle requests in real mode and KVM will keep references to tables. This adds a kref to iommu_table and defines new helpers to update it. This replaces iommu_free_table() with iommu_tce_table_put() and makes iommu_free_table() static. iommu_tce_table_get() is not used in this patch but it will be in the following patch. Since this touches prototypes, this also removes @node_name parameter as it has never been really useful on powernv and carrying it for the pseries platform code to iommu_free_table() seems to be quite useless as well. This should cause no behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/powernv: Fix it_ops::get() callback to return in cpu endianAlexey Kardashevskiy2017-03-201-1/+1
|/ | | | | | | | | | | | | | | | The iommu_table_ops callbacks are declared CPU endian as they take and return "unsigned long"; underlying hardware tables are big-endian. However get() was missing be64_to_cpu(), this adds the missing conversion. The only caller of this is crash dump at arch/powerpc/kernel/iommu.c, iommu_table_clear() which only compares TCE to zero so this change should not cause behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Use OPAL call for TCE kill on NVLink2Alistair Popple2017-01-301-0/+7
| | | | | | | | | | | Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register layout for the TCE kill register therefore TCE invalidation should be done via the OPAL call rather than using the register directly as it is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL call in the case of a NPU2 PHB model. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pci: Always print PHB and PE numbers as hexadecimalRussell Currey2016-11-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | PHB, PE (and by association MVE) numbers are printed as a mix of decimal and hexadecimal throughout the kernel. This can be misleading, so make them all hexadecimal. Standardising on hex instead of dec because: - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc) - PE numbers are presented as hex in sysfs and parsed in hex in debugfs The only place I think this could cause confusing are the messages during boot, i.e. pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0 which can be a quick way to check PE numbers. pe_level_printk() will only print two characters instead of three, so the above would be pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0 which gives a hint it's in hex. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Use CPU-endian PEST in pnv_pci_dump_p7ioc_diag_data()Gavin Shan2016-10-041-2/+2
| | | | | | | | | | | | This fixes the warnings reported from sparse: pci.c:312:33: warning: restricted __be64 degrades to integer pci.c:313:33: warning: restricted __be64 degrades to integer Fixes: cee72d5bb489 ("powerpc/powernv: Display diag data on p7ioc EEH errors") Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Remove all usages of NO_IRQMichael Ellerman2016-09-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski2016-08-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/powernv/ioda: Fix endianness when reading TCEsAlexey Kardashevskiy2016-07-211-2/+2
| | | | | | | | | | | | | | | The iommu_table_ops::exchange() callback writes new TCE to the table and returns old value and permission mask. The old TCE value is correctly converted from BE to CPU endian; however permission mask was calculated from BE value and therefore always returned DMA_NONE which could cause memory leak on LE systems using VFIO SPAPR TCE IOMMU v1 driver. This fixes pnv_tce_xchg() to have @oldtce a CPU endian. Fixes: 05c6cfb9dce0 ("powerpc/iommu/powernv: Release replaced TCE") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Discover IODA3 PHBsBenjamin Herrenschmidt2016-07-171-0/+4
| | | | | | | | | We instanciate them as IODA2. We also change the MSI EOI hack to only kick on PHB3 since it will not be needed on any new implementation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Functions to get/set PCI slot stateGavin Shan2016-06-211-0/+82
| | | | | | | | | | | | | | | This exports 4 functions, which base on the corresponding OPAL APIs to get/set PCI slot status. Those functions are going to be used by PowerNV PCI hotplug driver: pnv_pci_get_device_tree() opal_get_device_tree() pnv_pci_get_presence_state() opal_pci_get_presence_state() pnv_pci_get_power_state() opal_pci_get_power_state() pnv_pci_set_power_state() opal_pci_set_power_state() Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Introduce pnv_pci_get_slot_id()Gavin Shan2016-06-211-0/+38
| | | | | | | | | | This introduces pnv_pci_get_slot_id() to get the hotpluggable PCI slot ID from the corresponding device node. It will be used by hotplug driver. Requested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pci: Delay populating pdnGavin Shan2016-06-211-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pdn (struct pci_dn) instances are allocated from memblock or bootmem when creating PCI controller (hoses) in setup_arch(). PCI hotplug, which will be supported by proceeding patches, releases PCI device nodes and their corresponding pdn on unplugging event. The memory chunks for pdn instances allocated from memblock or bootmem are hard to reused after being released. This delays creating pdn by pci_devs_phb_init() from setup_arch() to core_initcall() so that they are allocated from slab. The memory consumed by pdn can be released to system without problem during PCI unplugging time. It indicates that pci_dn is unavailable in setup_arch() and the the fixup on pdn (like AGP's) can't be carried out that time. We have to do that in pcibios_root_bridge_prepare() on maple/pasemi/powermac platforms where/when the pdn is available. pcibios_root_bridge_prepare is called from subsys_initcall() which is executed after core_initcall() so the code flow does not change. At the mean while, the EEH device is created when pdn is populated, meaning pdn and EEH device have same life cycle. In turn, we needn't call eeh_dev_init() to create EEH device explicitly. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Remove PCI_RESET_DELAY_USGavin Shan2016-06-211-3/+0
| | | | | | | | | The macro defined in arch/powerpc/platforms/powernv/pci.c isn't used by anyone. Just remove it. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Data type unsigned int for PE numberGavin Shan2016-05-111-1/+1
| | | | | | | | | | | | | | | | This changes the data type of PE number from "int" to "unsigned int" in order to match the fact PE number is never negative: * The number of PE to which the specified PCI device is attached. * The PE number map for SRIOV VFs. * The returned PE number from pnv_ioda_alloc_pe(). * The returned PE number from pnv_ioda2_pick_m64_pe(). Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-By: Alistair Popple <alistair@popple.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv: Rename PE# fields in struct pnv_phbGavin Shan2016-05-111-1/+1
| | | | | | | | | | This renames the fields related to PE number in "struct pnv_phb" for better reflecting of their usages as Alexey suggested. No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/pci: Fix cfg_dbg() & replace with pr_devel()Alexey Kardashevskiy2016-05-111-9/+6
| | | | | | | | | | | | When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one); this adds the missing parameter. cfg_dbg() is just an inferior version of pr_devel() so use the latter instead. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge tag 'powerpc-4.5-4' into nextMichael Ellerman2016-02-251-0/+26
|\ | | | | | | | | Pull in our current fixes from 4.5, in particular the "Fix Multi hit ERAT" bug is causing folks some grief when testing next.
| * powerpc/ioda: Set "read" permission when "write" is setAlexey Kardashevskiy2016-02-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quite often drivers set only "write" permission assuming that this includes "read" permission as well and this works on plenty of platforms. However IODA2 is strict about this and produces an EEH when "read" permission is not set and reading happens. This adds a workaround in the IODA code to always add the "read" bit when the "write" bit is set. Fixes: 10b35b2b7485 ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE") Cc: stable@vger.kernel.org # 4.2+ Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/powernv: Fix stale PE primary busGavin Shan2016-02-151-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When PCI bus is unplugged during full hotplug for EEH recovery, the platform PE instance (struct pnv_ioda_pe) isn't released and it dereferences the stale PCI bus that has been released. It leads to kernel crash when referring to the stale PCI bus. This fixes the issue by correcting the PE's primary bus when it's oneline at plugging time, in pnv_pci_dma_bus_setup() which is to be called by pcibios_fixup_bus(). Cc: stable@vger.kernel.org # v4.1+ Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reported-by: Pradipta Ghosh <pradghos@in.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
View Lorry Controller Status