tiffcrop: Fix issue #330 and some more from 320 to 349

1 files changed, 210 insertions, 72 deletions

diff --git a/tools/tiffcrop.c b/tools/tiffcrop.c
index 77cf6ed1..791ec5e7 100644
--- a/tools/tiffcrop.c
+++ b/tools/tiffcrop.c
@@ -63,20 +63,24 @@
  *                units when sectioning image into columns x rows
  *                using the -S cols:rows option.
  * -X #           Horizontal dimension of region to extract expressed in current
- *                units
+ *                units, relative to the specified origin reference 'edge' left (default for X) or right.
  * -Y #           Vertical dimension of region to extract expressed in current
- *                units
+ *                units, relative to the specified origin reference 'edge' top (default for Y) or bottom.
  * -O orient      Orientation for output image, portrait, landscape, auto
  * -P page        Page size for output image segments, eg letter, legal, tabloid,
  *                etc.
  * -S cols:rows   Divide the image into equal sized segments using cols across
  *                and rows down
- * -E t|l|r|b     Edge to use as origin
+ * -E t|l|r|b     Edge to use as origin (i.e. 'side' of the image not 'corner')
+ *                  top    = width from left, zones from top to bottom (default)
+ *                  bottom = width from left, zones from bottom to top
+ *                  left   = zones from left to right, length from top
+ *                  right  = zones from right to left, length from top
  * -m #,#,#,#     Margins from edges for selection: top, left, bottom, right
  *                (commas separated)
  * -Z #:#,#:#     Zones of the image designated as zone X of Y, 
  *                eg 1:3 would be first of three equal portions measured
- *                from reference edge
+ *                from reference edge (i.e. 'side' not corner)
  * -N odd|even|#,#-#,#|last 
  *                Select sequences and/or ranges of images within file
  *                to process. The words odd or even may be used to specify
@@ -103,10 +107,13 @@
  *                selects which functions dump data, with higher numbers selecting
  *                lower level, scanline level routines. Debug reports a limited set
  *                of messages to monitor progress without enabling dump logs.
+ * 
+ * Note:    The (-X|-Y), -Z and -z options are mutually exclusive.
+ *          In no case should the options be applied to a given selection successively.
  */
 
-static   char tiffcrop_version_id[] = "2.4.1";
-static   char tiffcrop_rev_date[] = "03-03-2010";
+static   char tiffcrop_version_id[] = "2.5";
+static   char tiffcrop_rev_date[] = "02-09-2022";
 
 #include "tif_config.h"
 #include "libport.h"
@@ -774,6 +781,9 @@ static const char usage_info[] =
 "             The four debug/dump options are independent, though it makes little sense to\n"
 "             specify a dump file without specifying a detail level.\n"
 "\n"
+"Note:        The (-X|-Y), -Z and -z options are mutually exclusive.\n"
+"             In no case should the options be applied to a given selection successively.\n"
+"\n"
 ;
 
 /* This function could be modified to pass starting sample offset 
@@ -2121,6 +2131,15 @@ void  process_command_opts (int argc, char *argv[], char *mp, char *mode, uint32
 		/*NOTREACHED*/
       }
     }
+    /*-- Check for not allowed combinations (e.g. -X, -Y and -Z and -z are mutually exclusive) --*/
+    char XY, Z, R;
+    XY = ((crop_data->crop_mode & CROP_WIDTH) || (crop_data->crop_mode & CROP_LENGTH));
+    Z = (crop_data->crop_mode & CROP_ZONES);
+    R = (crop_data->crop_mode & CROP_REGIONS);
+    if ((XY && Z) || (XY && R) || (Z && R)) {
+        TIFFError("tiffcrop input error", "The crop options(-X|-Y), -Z and -z are mutually exclusive.->Exit");
+        exit(EXIT_FAILURE);
+    }
   }  /* end process_command_opts */
 
 /* Start a new output file if one has not been previously opened or
@@ -2746,7 +2765,7 @@ extractContigSamplesBytes (uint8_t *in, uint8_t *out, uint32_t cols,
                            tsample_t count, uint32_t start, uint32_t end)
   {
   int i, bytes_per_sample, sindex;
-  uint32_t col, dst_rowsize, bit_offset;
+  uint32_t col, dst_rowsize, bit_offset, numcols;
   uint32_t src_byte /*, src_bit */;
   uint8_t *src = in;
   uint8_t *dst = out;
@@ -2757,6 +2776,10 @@ extractContigSamplesBytes (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamplesBytes", 
@@ -2769,6 +2792,9 @@ extractContigSamplesBytes (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   dst_rowsize = (bps * (end - start) * count) / 8;
 
@@ -2812,7 +2838,7 @@ extractContigSamples8bits (uint8_t *in, uint8_t *out, uint32_t cols,
                            tsample_t count, uint32_t start, uint32_t end)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint8_t  maskbits = 0, matchbits = 0;
   uint8_t  buff1 = 0, buff2 = 0;
   uint8_t *src = in;
@@ -2824,6 +2850,10 @@ extractContigSamples8bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamples8bits", 
@@ -2836,7 +2866,10 @@ extractContigSamples8bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
-  
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
+
   ready_bits = 0;
   maskbits =  (uint8_t)-1 >> (8 - bps);
   buff1 = buff2 = 0;
@@ -2889,7 +2922,7 @@ extractContigSamples16bits (uint8_t *in, uint8_t *out, uint32_t cols,
                             tsample_t count, uint32_t start, uint32_t end)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint16_t maskbits = 0, matchbits = 0;
   uint16_t buff1 = 0, buff2 = 0;
   uint8_t  bytebuff = 0;
@@ -2902,6 +2935,10 @@ extractContigSamples16bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamples16bits", 
@@ -2914,6 +2951,9 @@ extractContigSamples16bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   ready_bits = 0;
   maskbits = (uint16_t)-1 >> (16 - bps);
@@ -2978,7 +3018,7 @@ extractContigSamples24bits (uint8_t *in, uint8_t *out, uint32_t cols,
                             tsample_t count, uint32_t start, uint32_t end)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint32_t maskbits = 0, matchbits = 0;
   uint32_t buff1 = 0, buff2 = 0;
   uint8_t  bytebuff1 = 0, bytebuff2 = 0;
@@ -2991,6 +3031,10 @@ extractContigSamples24bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamples24bits", 
@@ -3003,6 +3047,9 @@ extractContigSamples24bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   ready_bits = 0;
   maskbits =  (uint32_t)-1 >> (32 - bps);
@@ -3087,7 +3134,7 @@ extractContigSamples32bits (uint8_t *in, uint8_t *out, uint32_t cols,
                             tsample_t count, uint32_t start, uint32_t end)
   {
   int    ready_bits = 0, sindex = 0 /*, shift_width = 0 */;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint32_t longbuff1 = 0, longbuff2 = 0;
   uint64_t maskbits = 0, matchbits = 0;
   uint64_t buff1 = 0, buff2 = 0, buff3 = 0;
@@ -3102,6 +3149,10 @@ extractContigSamples32bits (uint8_t *in, uint8_t *out, uint32_t cols,
     }
 
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamples32bits", 
@@ -3114,6 +3165,9 @@ extractContigSamples32bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   /* shift_width = ((bps + 7) / 8) + 1; */ 
   ready_bits = 0;
@@ -3193,7 +3247,7 @@ extractContigSamplesShifted8bits (uint8_t *in, uint8_t *out, uint32_t cols,
                                   int shift)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint8_t  maskbits = 0, matchbits = 0;
   uint8_t  buff1 = 0, buff2 = 0;
   uint8_t *src = in;
@@ -3205,6 +3259,10 @@ extractContigSamplesShifted8bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamplesShifted8bits", 
@@ -3217,6 +3275,9 @@ extractContigSamplesShifted8bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   ready_bits = shift;
   maskbits =  (uint8_t)-1 >> (8 - bps);
@@ -3273,7 +3334,7 @@ extractContigSamplesShifted16bits (uint8_t *in, uint8_t *out, uint32_t cols,
                                    int shift)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint16_t maskbits = 0, matchbits = 0;
   uint16_t buff1 = 0, buff2 = 0;
   uint8_t  bytebuff = 0;
@@ -3286,6 +3347,10 @@ extractContigSamplesShifted16bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamplesShifted16bits", 
@@ -3298,6 +3363,9 @@ extractContigSamplesShifted16bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   ready_bits = shift;
   maskbits = (uint16_t)-1 >> (16 - bps);
@@ -3363,7 +3431,7 @@ extractContigSamplesShifted24bits (uint8_t *in, uint8_t *out, uint32_t cols,
                                    int shift)
   {
   int    ready_bits = 0, sindex = 0;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint32_t maskbits = 0, matchbits = 0;
   uint32_t buff1 = 0, buff2 = 0;
   uint8_t  bytebuff1 = 0, bytebuff2 = 0;
@@ -3376,6 +3444,16 @@ extractContigSamplesShifted24bits (uint8_t *in, uint8_t *out, uint32_t cols,
     return (1);
     }
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  /*--- Remark, which is true for all those functions extractCongigSamplesXXX() --
+  *  The mitigation of the start/end test does not allways make sense, because the function is often called with e.g.:
+  *  start = 31; end = 32; cols = 32  to extract the last column in a 32x32 sample image. 
+  *  If then, a worng parameter (e.g. cols = 10) is provided, the mitigated settings would be start=0; end=1. 
+  *  Therefore, an error message and no copy action might be the better reaction to wrong parameter configurations.
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamplesShifted24bits", 
@@ -3388,6 +3466,9 @@ extractContigSamplesShifted24bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   ready_bits = shift;
   maskbits =  (uint32_t)-1 >> (32 - bps);
@@ -3449,7 +3530,7 @@ extractContigSamplesShifted24bits (uint8_t *in, uint8_t *out, uint32_t cols,
     buff2 = (buff2 << 8);
     bytebuff2 = bytebuff1;
     ready_bits -= 8;
-    }
+  }
    
   return (0);
   } /* end extractContigSamplesShifted24bits */
@@ -3461,7 +3542,7 @@ extractContigSamplesShifted32bits (uint8_t *in, uint8_t *out, uint32_t cols,
                                    int shift)
   {
   int    ready_bits = 0, sindex = 0 /*, shift_width = 0 */;
-  uint32_t col, src_byte, src_bit, bit_offset;
+  uint32_t col, src_byte, src_bit, bit_offset, numcols;
   uint32_t longbuff1 = 0, longbuff2 = 0;
   uint64_t maskbits = 0, matchbits = 0;
   uint64_t buff1 = 0, buff2 = 0, buff3 = 0;
@@ -3476,6 +3557,10 @@ extractContigSamplesShifted32bits (uint8_t *in, uint8_t *out, uint32_t cols,
     }
 
 
+  /* Number of extracted columns shall be kept as (end-start + 1). Otherwise buffer-overflow might occur.
+   * 'start' and 'col' count from 0 to (cols-1)  but 'end' is to be set one after the index of the last column to be copied!
+   */
+  numcols = abs(end - start);
   if ((start > end) || (start > cols))
     {
     TIFFError ("extractContigSamplesShifted32bits", 
@@ -3488,6 +3573,9 @@ extractContigSamplesShifted32bits (uint8_t *in, uint8_t *out, uint32_t cols,
                "Invalid end column value %"PRIu32" ignored", end);
     end = cols;
     }
+  if (abs(end - start) > numcols) {
+      end = start + numcols;
+  }
 
   /* shift_width = ((bps + 7) / 8) + 1; */ 
   ready_bits = shift;
@@ -5429,7 +5517,7 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
   {
   struct offset offsets;
   int    i;
-  int32_t  test;
+  uint32_t uaux;
   uint32_t seg, total, need_buff = 0;
   uint32_t buffsize;
   uint32_t zwidth, zlength;
@@ -5510,8 +5598,13 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
     seg = crop->zonelist[j].position;
     total = crop->zonelist[j].total;
 
-    /* check for not allowed zone cases like 0:0; 4:3; etc. and skip that input */
+    /* check for not allowed zone cases like 0:0; 4:3; or negative ones etc. and skip that input */
+    if (crop->zonelist[j].position < 0 || crop->zonelist[j].total < 0) {
+        TIFFError("getCropOffsets", "Negative crop zone values %d:%d are not allowed, thus skipped.", crop->zonelist[j].position, crop->zonelist[j].total);
+        continue;
+    }
     if (seg == 0 || total == 0 || seg > total) {
+        TIFFError("getCropOffsets", "Crop zone %d:%d is out of specification, thus skipped.", seg, total);
         continue;
     }
 
@@ -5524,17 +5617,23 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
 
            crop->regionlist[i].x1 = offsets.startx + 
                                   (uint32_t)(offsets.crop_width * 1.0 * (seg - 1) / total);
-           test = (int32_t)offsets.startx +
-                  (int32_t)(offsets.crop_width * 1.0 * seg / total);
-           if (test < 1 )
-             crop->regionlist[i].x2 = 0;
-           else
-	     {
-	     if (test > (int32_t)(image->width - 1))
+           /* FAULT: IMHO in the old code here, the calculation of x2 was based on wrong assumtions. The whole image was assumed and 'endy' and 'starty' are not respected anymore!*/
+           /* NEW PROPOSED Code: Assumption: offsets are within image with top left corner as origin (0,0) and 'start' <= 'end'. */
+           if (crop->regionlist[i].x1 > offsets.endx) {
+                crop->regionlist[i].x1 = offsets.endx;
+           } else if (crop->regionlist[i].x1 >= image->width) {
+               crop->regionlist[i].x1 = image->width - 1;
+           }
+
+           crop->regionlist[i].x2 = offsets.startx + (uint32_t)(offsets.crop_width * 1.0 * seg / total);
+           if (crop->regionlist[i].x2 > 0) crop->regionlist[i].x2 = crop->regionlist[i].x2 - 1;
+           if (crop->regionlist[i].x2 < crop->regionlist[i].x1) {
+               crop->regionlist[i].x2 = crop->regionlist[i].x1;
+           } else if (crop->regionlist[i].x2 > offsets.endx) {
+               crop->regionlist[i].x2 = offsets.endx;
+           } else if (crop->regionlist[i].x2 >= image->width) {
                crop->regionlist[i].x2 = image->width - 1;
-             else
-	       crop->regionlist[i].x2 = test - 1;
-             }
+           }
            zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1  + 1;
 
 	   /* This is passed to extractCropZone or extractCompositeZones */
@@ -5549,22 +5648,27 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
 	   crop->regionlist[i].x1 = offsets.startx;
            crop->regionlist[i].x2 = offsets.endx;
 
-           test = offsets.endy - (uint32_t)(offsets.crop_length * 1.0 * seg / total);
-           if (test < 1 )
-	     crop->regionlist[i].y1 = 0;
-           else
-	     crop->regionlist[i].y1 = test + 1;
+           /* FAULT: IMHO in the old code here, the calculation of y1/y2 was based on wrong assumtions. The whole image was assumed and 'endy' and 'starty' are not respected anymore!*/
+           /* NEW PROPOSED Code: Assumption: offsets are within image with top left corner as origin (0,0) and 'start' <= 'end'. */
+           uaux = (uint32_t)(offsets.crop_length * 1.0 * seg / total);
+           if (uaux <= offsets.endy + 1) {
+               crop->regionlist[i].y1 = offsets.endy - uaux + 1;
+           } else {
+               crop->regionlist[i].y1 = 0;
+           }
+           if (crop->regionlist[i].y1 < offsets.starty) {
+               crop->regionlist[i].y1 = offsets.starty;
+           }
 
-           test = offsets.endy - (offsets.crop_length * 1.0 * (seg - 1) / total);
-           if (test < 1 )
-             crop->regionlist[i].y2 = 0;
-           else
-	     {
-             if (test > (int32_t)(image->length - 1))
-               crop->regionlist[i].y2 = image->length - 1;
-             else 
-               crop->regionlist[i].y2 = test;
-	     }
+           uaux = (uint32_t)(offsets.crop_length * 1.0 * (seg - 1) / total);
+           if (uaux <= offsets.endy) {
+               crop->regionlist[i].y2 = offsets.endy - uaux;
+           } else {
+               crop->regionlist[i].y2 = 0;
+           }
+           if (crop->regionlist[i].y2 < offsets.starty) {
+               crop->regionlist[i].y2 = offsets.starty;
+           }
            zlength = crop->regionlist[i].y2 - crop->regionlist[i].y1 + 1;
 
 	   /* This is passed to extractCropZone or extractCompositeZones */
@@ -5575,32 +5679,42 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
            crop->combined_width = (uint32_t)zwidth;
            break;
       case EDGE_RIGHT: /* zones from right to left, length from top */
-           zlength = offsets.crop_length;
-	   crop->regionlist[i].y1 = offsets.starty;
-           crop->regionlist[i].y2 = offsets.endy;
-
-           crop->regionlist[i].x1 = offsets.startx +
-                                  (uint32_t)(offsets.crop_width * (total - seg) * 1.0 / total);
-           test = offsets.startx + 
-	          (offsets.crop_width * (total - seg + 1) * 1.0 / total);
-           if (test < 1 )
-             crop->regionlist[i].x2 = 0;
-           else
-	     {
-	     if (test > (int32_t)(image->width - 1))
-               crop->regionlist[i].x2 = image->width - 1;
-             else
-               crop->regionlist[i].x2 = test - 1;
-             }
-           zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1  + 1;
+		  zlength = offsets.crop_length;
+		  crop->regionlist[i].y1 = offsets.starty;
+		  crop->regionlist[i].y2 = offsets.endy;
+
+		  crop->regionlist[i].x1 = offsets.startx +
+			  (uint32_t)(offsets.crop_width * (total - seg) * 1.0 / total);
+          /* FAULT: IMHO from here on, the calculation of y2 are based on wrong assumtions. The whole image is assumed and 'endy' and 'starty' are not respected anymore!*/
+          /* NEW PROPOSED Code: Assumption: offsets are within image with top left corner as origin (0,0) and 'start' <= 'end'. */
+          uaux = (uint32_t)(offsets.crop_width * 1.0 * seg / total);
+          if (uaux <= offsets.endx + 1) {
+              crop->regionlist[i].x1 = offsets.endx - uaux + 1;
+          } else {
+              crop->regionlist[i].x1 = 0;
+          }
+          if (crop->regionlist[i].x1 < offsets.startx) {
+              crop->regionlist[i].x1 = offsets.startx;
+          }
 
-	   /* This is passed to extractCropZone or extractCompositeZones */
-           crop->combined_length = (uint32_t)zlength;
-           if (crop->exp_mode == COMPOSITE_IMAGES)
-             crop->combined_width += (uint32_t)zwidth;
-           else
-             crop->combined_width = (uint32_t)zwidth;
-           break;
+          uaux = (uint32_t)(offsets.crop_width * 1.0 * (seg - 1) / total);
+          if (uaux <= offsets.endx) {
+              crop->regionlist[i].x2 = offsets.endx - uaux;
+          } else {
+              crop->regionlist[i].x2 = 0;
+          }
+          if (crop->regionlist[i].x2 < offsets.startx) {
+              crop->regionlist[i].x2 = offsets.startx;
+          }
+          zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1 + 1;
+
+		  /* This is passed to extractCropZone or extractCompositeZones */
+		  crop->combined_length = (uint32_t)zlength;
+		  if (crop->exp_mode == COMPOSITE_IMAGES)
+			  crop->combined_width += (uint32_t)zwidth;
+		  else
+			  crop->combined_width = (uint32_t)zwidth;
+		  break;
       case EDGE_TOP: /* width from left, zones from top to bottom */
       default:
            zwidth = offsets.crop_width;
@@ -5608,6 +5722,14 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
            crop->regionlist[i].x2 = offsets.endx;
 
            crop->regionlist[i].y1 = offsets.starty + (uint32_t)(offsets.crop_length * 1.0 * (seg - 1) / total);
+           if (crop->regionlist[i].y1 > offsets.endy) {
+               crop->regionlist[i].y1 = offsets.endy;
+           } else if (crop->regionlist[i].y1 >= image->length) {
+               crop->regionlist[i].y1 = image->length - 1;
+           }
+
+           /* FAULT: IMHO from here on, the calculation of y2 are based on wrong assumtions. The whole image is assumed and 'endy' and 'starty' are not respected anymore!*/
+           /* OLD Code: 
            test = offsets.starty + (uint32_t)(offsets.crop_length * 1.0 * seg / total);
            if (test < 1 )
              crop->regionlist[i].y2 = 0;
@@ -5618,6 +5740,18 @@ getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opt
              else
 	       crop->regionlist[i].y2 = test - 1;
 	     }
+           */
+		   /* NEW PROPOSED Code: Assumption: offsets are within image with top left corner as origin (0,0) and 'start' <= 'end'. */
+		   crop->regionlist[i].y2 = offsets.starty + (uint32_t)(offsets.crop_length * 1.0 * seg / total);
+           if (crop->regionlist[i].y2 > 0)crop->regionlist[i].y2 = crop->regionlist[i].y2 - 1;
+		   if (crop->regionlist[i].y2 < crop->regionlist[i].y1) {
+			   crop->regionlist[i].y2 = crop->regionlist[i].y1;
+		   } else if (crop->regionlist[i].y2 > offsets.endy) {
+			   crop->regionlist[i].y2 = offsets.endy;
+		   } else if (crop->regionlist[i].y2 >= image->length) {
+			   crop->regionlist[i].y2 = image->length - 1;
+		   }
+
            zlength = crop->regionlist[i].y2 - crop->regionlist[i].y1 + 1;
 
 	   /* This is passed to extractCropZone or extractCompositeZones */
@@ -7551,7 +7685,8 @@ processCropSelections(struct image_data *image, struct crop_mask *crop,
     total_width = total_length = 0;
     for (i = 0; i < crop->selections; i++)
       {
-      cropsize = crop->bufftotal;
+
+        cropsize = crop->bufftotal;
       crop_buff = seg_buffs[i].buffer; 
       if (!crop_buff)
         crop_buff = (unsigned char *)limitMalloc(cropsize);
@@ -7640,6 +7775,9 @@ processCropSelections(struct image_data *image, struct crop_mask *crop,
 
       if (crop->crop_mode & CROP_ROTATE) /* rotate should be last as it can reallocate the buffer */
         {
+          /* rotateImage() changes image->width, ->length, ->xres and ->yres, what it schouldn't do here, when more than one section is processed. 
+           * ToDo: Therefore rotateImage() and its usage has to be reworked (e.g. like mirrorImage()) !!
+           */
 	if (rotateImage(crop->rotation, image, &crop->regionlist[i].width, 
 			&crop->regionlist[i].length, &crop_buff))
           {
@@ -7655,8 +7793,8 @@ processCropSelections(struct image_data *image, struct crop_mask *crop,
         seg_buffs[i].size = (((crop->regionlist[i].width * image->bps + 7 ) / 8)
                                * image->spp) * crop->regionlist[i].length; 
         }
-      }
-    }
+      }  /* for crop->selections loop */
+    }  /* Separated Images (else case) */
   return (0);
   } /* end processCropSelections */