[libpng17] Imported from libpng-1.7.0beta64.tarv1.7.0beta64

15 files changed, 891 insertions, 23 deletions

diff --git a/README b/README
index 2a726e5f3..be418fda6 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
-README for libpng version 1.7.0beta64 - June 6, 2015 (shared library 17.0)
+README for libpng version 1.7.0beta64 - July 26, 2015 (shared library 17.0)
 See the note about version numbers near the top of png.h
 
 See INSTALL for instructions on how to install libpng.
diff --git a/contrib/arm-neon/README b/contrib/arm-neon/README
index 535c8d3f7..b4248cf28 100644
--- a/contrib/arm-neon/README
+++ b/contrib/arm-neon/README
@@ -1,7 +1,7 @@
 OPERATING SYSTEM SPECIFIC ARM NEON DETECTION
 --------------------------------------------
 
-Detection of the ability to exexcute ARM NEON on an ARM processor requires
+Detection of the ability to execute ARM NEON on an ARM processor requires
 operating system support.  (The information is not available in user mode.)
 
 HOW TO USE THIS
diff --git a/contrib/pngminim/decoder/makefile b/contrib/pngminim/decoder/makefile
index 23e8e5b85..4acf3c177 100644
--- a/contrib/pngminim/decoder/makefile
+++ b/contrib/pngminim/decoder/makefile
@@ -82,7 +82,7 @@ OBJS    = $(PROGOBJS) $(PNGOBJS) $(ZOBJS)
 
 # note: dependencies do not work on implicit rule lines
 .c$(O):
-	$(CC) $(CPPFLAGS) -c $(CFLAGS) $<
+	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<
 
 # dependencies
 
diff --git a/contrib/pngminim/encoder/makefile b/contrib/pngminim/encoder/makefile
index ce67a9623..41b205c28 100644
--- a/contrib/pngminim/encoder/makefile
+++ b/contrib/pngminim/encoder/makefile
@@ -81,7 +81,7 @@ OBJS    = $(PROGOBJS) $(PNGOBJS) $(ZOBJS)
 # implicit make rules -------------------------------------------------------
 
 .c$(O):
-	$(CC) $(CPPFLAGS) -c $(CFLAGS) $<
+	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<
 
 # dependencies
 
diff --git a/contrib/pngminim/preader/makefile b/contrib/pngminim/preader/makefile
index c6855e8ff..b62519911 100644
--- a/contrib/pngminim/preader/makefile
+++ b/contrib/pngminim/preader/makefile
@@ -97,7 +97,7 @@ OBJS    = $(PROGOBJS) $(PNGOBJS) $(ZOBJS)
 # implicit make rules -------------------------------------------------------
 
 .c$(O):
-	$(CC) $(CPPFLAGS) -c $(CFLAGS) $<
+	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<
 
 # dependencies
 
diff --git a/contrib/tools/genpng.c b/contrib/tools/genpng.c
new file mode 100644
index 000000000..44102b4d6
--- /dev/null
+++ b/contrib/tools/genpng.c
@@ -0,0 +1,867 @@
+/*- genpng
+ *
+ * COPYRIGHT: Written by John Cunningham Bowler, 2015.
+ * To the extent possible under law, the author has waived all copyright and
+ * related or neighboring rights to this work.  This work is published from:
+ * United States.
+ *
+ * Generate a PNG with an alpha channel, correctly.
+ *
+ * This is a test case generator; the resultant PNG files are only of interest
+ * to those of us who care about whether the edges of circles are green, red,
+ * or yellow.
+ *
+ * The program generates an RGB+Alpha PNG of a given size containing the given
+ * shapes on a transparent background:
+ *
+ *  genpng width height { shape }
+ *    shape ::= color width shape x1 y1 x2 y2
+ *
+ * 'color' is:
+ *
+ *  black white red green yellow blue brown purple pink orange gray cyan
+ *
+ * The point is to have colors that are linguistically meaningful plus that old
+ * bugbear of the department store dress murders, Cyan, the only color we argue
+ * about.
+ *
+ * 'shape' is:
+ *
+ *  circle: an ellipse
+ *  square: a rectangle
+ *  line: a straight line
+ *
+ * Each shape is followed by four numbers, these are two points in the output
+ * coordinate space (as real numbers) which describe the circle, square, or
+ * line.  The shape is filled if it is preceded by 'filled' (not valid for
+ * 'line') or is drawn with a line, in which case the width of the line must
+ * precede the shape.
+ *
+ * The whole set of information can be repeated as many times as desired:
+ *
+ *    shape ::= color width shape x1 y1 x2 y2
+ *
+ *    color ::= black|white|red|green|yellow|blue
+ *    color ::= brown|purple|pink|orange|gray|cyan
+ *    width ::= filled
+ *    width ::= <number>
+ *    shape ::= circle|square|line
+ *    x1    ::= <number>
+ *    x2    ::= <number>
+ *    y1    ::= <number>
+ *    y2    ::= <number>
+ *
+ * The output PNG is generated by down-sampling a 4x supersampled image using
+ * a bi-cubic filter.  The bi-cubic has a 2 (output) pixel width, so an 8x8
+ * array of super-sampled points contribute to each output pixel.  The value of
+ * a super-sampled point is found using an unfiltered, aliased, infinite
+ * precision image: Each shape from the last to the first is checked to see if
+ * the point is in the drawn area and, if it is, the color of the point is the
+ * color of the shape and the alpha is 1, if not the previous shape is checked.
+ *
+ * This is an aliased algorithm because no filtering is done; a point is either
+ * inside or outside each shape and 'close' points do not contribute to the
+ * sample.  The down-sampling is relied on to correct the error of not using
+ * a filter.
+ *
+ * The line end-caps are 'flat'; they go through the points.  The square line
+ * joins are mitres; the outside of the lines are continued to the point of
+ * intersection.
+ */
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <math.h>
+
+/* Normally use <png.h> here to get the installed libpng, but this is done to
+ * ensure the code picks up the local libpng implementation:
+ */
+#include "../../png.h"
+
+#if defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) && defined(PNG_STDIO_SUPPORTED)
+
+static const struct color
+{
+   const char *name;
+   double      red;
+   double      green;
+   double      blue;
+} colors[] =
+/* color ::= black|white|red|green|yellow|blue
+ * color ::= brown|purple|pink|orange|gray|cyan
+ */
+{
+   { "black",   0,    0,  0 },
+   { "white",   1,    1,  1 },
+   { "red",     1,    0,  0 },
+   { "green",   0,    1,  0 },
+   { "yellow",  1,    1,  0 },
+   { "blue",    0,    0,  1 },
+   { "brown",  .5, .125,  0 },
+   { "purple",  1,    0,  1 },
+   { "pink",    1,   .5, .5 },
+   { "orange",  1,   .5,  0 },
+   { "gray",    0,   .5, .5 },
+   { "cyan",    0,    1,  1 }
+};
+#define color_count ((sizeof colors)/(sizeof colors[0]))
+
+static const struct color *
+color_of(const char *arg)
+{
+   int icolor = color_count;
+
+   while (--icolor >= 0)
+   {
+      if (strcmp(colors[icolor].name, arg) == 0)
+         return colors+icolor;
+   }
+
+   fprintf(stderr, "genpng: invalid color %s\n", arg);
+   exit(1);
+}
+
+static double
+width_of(const char *arg)
+{
+   if (strcmp(arg, "filled") == 0)
+      return 0;
+
+   else
+   {
+      char *ep = NULL;
+      double w = strtod(arg, &ep);
+
+      if (ep != NULL && *ep == 0 && w > 0)
+         return w;
+   }
+
+   fprintf(stderr, "genpng: invalid line width %s\n", arg);
+   exit(1);
+}
+
+static double
+coordinate_of(const char *arg)
+{
+   char *ep = NULL;
+   double w = strtod(arg, &ep);
+
+   if (ep != NULL && *ep == 0)
+      return w;
+
+   fprintf(stderr, "genpng: invalid coordinate value %s\n", arg);
+   exit(1);
+}
+
+struct arg; /* forward declaration */
+
+typedef int (*shape_fn_ptr)(const struct arg *arg, double x, double y);
+   /* A function to determine if (x,y) is inside the shape.
+    *
+    * There are two implementations:
+    *
+    *    inside_fn: returns true if the point is inside
+    *    check_fn:  returns;
+    *       -1: the point is outside the shape by more than the filter width (2)
+    *        0: the point may be inside the shape
+    *       +1: the point is inside the shape by more than the filter width
+    */
+#define OUTSIDE (-1)
+#define INSIDE  (1)
+
+struct arg
+{
+   const struct color *color;
+   shape_fn_ptr        inside_fn;
+   shape_fn_ptr        check_fn;
+   double              width; /* line width, 0 for 'filled' */
+   double              x1, y1, x2, y2;
+};
+
+/* IMPLEMENTATION NOTE:
+ *
+ * We want the contribution of each shape to the sample corresponding to each
+ * pixel.  This could be obtained by super sampling the image to infinite
+ * dimensions, finding each point within the shape and assigning that a value
+ * '1' while leaving every point outside the shape with value '0' then
+ * downsampling to the image size with sinc; computationally very expensive.
+ *
+ * Approximations are as follows:
+ *
+ * 1) If the pixel coordinate is within the shape assume the sample has the
+ *    shape color and is opaque, else assume there is no contribution from
+ *    the shape.
+ *
+ *    This is the equivalent of aliased rendering or resampling an image with
+ *    a block filter.  The maximum error in the calculated alpha (which will
+ *    always be 0 or 1) is 0.5.
+ *
+ * 2) If the shape is within a square of size 1x1 centered on the pixel assume
+ *    that the shape obscures an amount of the pixel equal to its area within
+ *    that square.
+ *
+ *    This is the equivalent of 'pixel coverage' alpha calculation or resampling
+ *    an image with a bi-linear filter.  The maximum error is over 0.2, but the
+ *    results are often acceptable.
+ *
+ *    This can be approximated by applying (1) to a super-sampled image then
+ *    downsampling with a bi-linear filter.  The error in the super-sampled
+ *    image is 0.5 per sample, but the resampling reduces this.
+ *
+ * 3) Use a better filter with a super-sampled image; in the limit this is the
+ *    sinc() approach.
+ *
+ * 4) Do the geometric calculation; a bivariate definite integral across the
+ *    shape, unfortunately this means evaluating Si(x), the integral of sinc(x),
+ *    which is still a lot of math.
+ *
+ * This code uses approach (3) with a bi-cubic filter and 8x super-sampling
+ * and method (1) for the super-samples.  This means that the sample is either
+ * 0 or 1, depending on whether the sub-pixel is within or outside the shape.
+ * The bi-cubic weights are also fixed and the 16 required weights are
+ * pre-computed here (note that the 'scale' setting will need to be changed if
+ * 'super' is increased).
+ *
+ * The code also calculates a sum to the edge of the filter. This is not
+ * currently used by could be used to optimize the calculation.
+ */
+#if 0 /* bc code */
+scale=10
+super=8
+define bicubic(x) {
+   if (x <= 1) return (1.5*x - 2.5)*x*x + 1;
+   if (x <  2) return (((2.5 - 0.5*x)*x - 4)*x + 2);
+   return 0;
+}
+define sum(x) {
+   auto s;
+   s = 0;
+   while (x < 2*super) {
+      s = s + bicubic(x/super);
+      x = x + 1;
+   }
+   return s;
+}
+define results(x) {
+   auto b, s;
+   b = bicubic(x/super);
+   s = sum(x);
+
+   print "   /*", x, "*/ { ", b, ", ", s, " }";
+   return 1;
+}
+x=0
+while (x<2*super) {
+   x = x + results(x)
+   if (x < 2*super) print ","
+   print "\n"
+}
+quit
+#endif
+
+#define BICUBIC1(x) /*     |x| <= 1 */ ((1.5*(x)* - 2.5)*(x)*(x) + 1)
+#define BICUBIC2(x) /* 1 < |x| <  2 */ (((2.5 - 0.5*(x))*(x) - 4)*(x) + 2)
+#define FILTER_WEIGHT 9 /* Twice the first sum below */
+#define FILTER_WIDTH  2 /* Actually half the width; -2..+2 */
+#define FILTER_STEPS  8 /* steps per filter unit */
+static const double
+bicubic[16][2] =
+{
+   /* These numbers are exact; the weight for the filter is 1/9, but this
+    * would make the numbers inexact, so it is not included here.
+    */
+   /*          bicubic      sum        */
+   /* 0*/ { 1.0000000000, 4.5000000000 },
+   /* 1*/ {  .9638671875, 3.5000000000 },
+   /* 2*/ {  .8671875000, 2.5361328125 },
+   /* 3*/ {  .7275390625, 1.6689453125 },
+   /* 4*/ {  .5625000000,  .9414062500 },
+   /* 5*/ {  .3896484375,  .3789062500 },
+   /* 6*/ {  .2265625000, -.0107421875 },
+   /* 7*/ {  .0908203125, -.2373046875 },
+   /* 8*/ {            0, -.3281250000 },
+   /* 9*/ { -.0478515625, -.3281250000 },
+   /*10*/ { -.0703125000, -.2802734375 },
+   /*11*/ { -.0732421875, -.2099609375 },
+   /*12*/ { -.0625000000, -.1367187500 },
+   /*13*/ { -.0439453125, -.0742187500 },
+   /*14*/ { -.0234375000, -.0302734375 },
+   /*15*/ { -.0068359375, -.0068359375 }
+};
+
+static double
+alpha_calc(const struct arg *arg, double x, double y)
+{
+   /* For [x-2..x+2],[y-2,y+2] calculate the weighted bicubic given a function
+    * which tells us whether a point is inside or outside the shape.  First
+    * check if we need to do this at all:
+    */
+   switch (arg->check_fn(arg, x, y))
+   {
+      case OUTSIDE:
+         return 0; /* all samples outside the shape */
+
+      case INSIDE:
+         return 1; /* all samples inside the shape */
+
+      default:
+      {
+         int dy;
+         double alpha = 0;
+
+#        define FILTER_D (FILTER_WIDTH*FILTER_STEPS-1)
+         for (dy=-FILTER_D; dy<=FILTER_D; ++dy)
+         {
+            double wy = bicubic[abs(dy)][0];
+
+            if (wy != 0)
+            {
+               double alphay = 0;
+               int dx;
+
+               for (dx=-FILTER_D; dx<=FILTER_D; ++dx)
+               {
+                  double wx = bicubic[abs(dx)][0];
+
+                  if (wx != 0 && arg->inside_fn(arg, x+dx/16, y+dy/16)) 
+                     alphay += wx;
+               }
+
+               alpha += wy * alphay;
+            }
+         }
+
+         /* This needs to be weighted for each dimension: */
+         return alpha / (FILTER_WEIGHT*FILTER_WEIGHT);
+      }
+   }
+}
+
+/* These are the shape functions. */
+/* "square",
+ * { inside_square_filled, check_square_filled },
+ * { inside_square, check_square }
+ */
+static int
+square_check(double x, double y, double x1, double y1, double x2, double y2)
+   /* Is x,y inside the square (x1,y1)..(x2,y2)? */
+{
+   /* Do a modified Cohen-Sutherland on one point, bit patterns that indicate
+    * 'outside' are:
+    *
+    *   x<x1 | x<y1 | x<x2 | x<y2
+    *    0      x      0      x     To the right
+    *    1      x      1      x     To the left
+    *    x      0      x      0     Below
+    *    x      1      x      1     Above
+    *
+    * So 'inside' is (x<x1) != (x<x2) && (y<y1) != (y<y2);
+    */
+   return ((x<x1) ^ (x<x2)) & ((y<y1) ^ (y<y2));
+}
+
+static int
+inside_square_filled(const struct arg *arg, double x, double y)
+{
+   return square_check(x, y, arg->x1, arg->y1, arg->x2, arg->y2);
+}
+
+static int
+square_check_line(const struct arg *arg, double x, double y, double w)
+   /* Check for a point being inside the boundaries implied by the given arg
+    * and assuming a width 2*w each side of the boundaries.  This returns the
+    * 'check' INSIDE/OUTSIDE/0 result but note the semantics:
+    *
+    *          +--------------+
+    *          |              |   OUTSIDE
+    *          |   INSIDE     |
+    *          |              |
+    *          +--------------+
+    *
+    * And '0' means within the line boundaries.
+    */
+{
+   double cx = (arg->x1+arg->x2)/2;
+   double wx = fabs(arg->x1-arg->x2)/2;
+   double cy = (arg->y1+arg->y2)/2;
+   double wy = fabs(arg->y1-arg->y2)/2;
+
+   if (square_check(x, y, cx-wx-w, cy-wy-w, cx+wx+w, cy+wy+w))
+   {
+      /* Inside, but maybe too far; check for the redundant case where
+       * the lines overlap:
+       */
+      wx -= w;
+      wy -= w;
+      if (wx > 0 && wy > 0 && square_check(x, y, cx-wx, cy-wy, cx+wx, cy+wy))
+         return INSIDE; /* between (inside) the boundary lines. */
+
+      return 0; /* inside the lines themselves. */
+   }
+
+   return OUTSIDE; /* outside the boundary lines. */
+}
+
+static int
+check_square_filled(const struct arg *arg, double x, double y)
+{
+   /* The filter extends +/-FILTER_WIDTH each side of each output point, so
+    * the check has to expand and contract the square by that amount; '0'
+    * means close enough to the edge of the square that the bicubic filter has
+    * to be run, OUTSIDE means alpha==0, INSIDE means alpha==1.
+    */
+   return square_check_line(arg, x, y, FILTER_WIDTH);
+}
+
+static int
+inside_square(const struct arg *arg, double x, double y)
+{
+   /* Return true if within the drawn lines, else false, no need to distinguish
+    * INSIDE vs OUTSIDE here:
+    */
+   return square_check_line(arg, x, y, arg->width/2) == 0;
+}
+
+static int
+check_square(const struct arg *arg, double x, double y)
+{
+   /* So for this function a result of 'INSIDE' means inside the actual lines.
+    */
+   double w = arg->width/2;
+
+   if (square_check_line(arg, x, y, w+FILTER_WIDTH) == 0)
+   {
+      /* Somewhere close to the boundary lines. If far enough inside one of
+       * them then we can return INSIDE:
+       */
+      w -= FILTER_WIDTH;
+
+      if (w > 0 && square_check_line(arg, x, y, w) == 0)
+         return INSIDE;
+
+      /* Point is somewhere in the filter region: */
+      return 0;
+   }
+
+   else /* Inside or outside the square by more than w+FILTER_WIDTH. */
+      return OUTSIDE;
+}
+
+/* "circle",
+ * { inside_circle_filled, check_circle_filled },
+ * { inside_circle, check_circle }
+ *
+ * The functions here are analoguous to the square ones; however, they check
+ * the corresponding ellipse as opposed to the rectangle.
+ */
+static int
+circle_check(double x, double y, double x1, double y1, double x2, double y2)
+{
+   if (square_check(x, y, x1, y1, x2, y2))
+   {
+      /* Inside the square, so maybe inside the circle too: */
+      const double cx = (x1 + x2)/2;
+      const double cy = (y1 + y2)/2;
+      const double dx = x1 - x2;
+      const double dy = y1 - y2;
+
+      x = (x - cx)/dx;
+      y = (y - cy)/dy;
+
+      /* It is outside if the distance from the center is more than half the
+       * diameter:
+       */
+      return x*x+y*y < .25;
+   }
+
+   return 0; /* outside */
+}
+
+static int
+inside_circle_filled(const struct arg *arg, double x, double y)
+{
+   return circle_check(x, y, arg->x1, arg->y1, arg->x2, arg->y2);
+}
+
+static int
+circle_check_line(const struct arg *arg, double x, double y, double w)
+   /* Check for a point being inside the boundaries implied by the given arg
+    * and assuming a width 2*w each side of the boundaries.  This function has
+    * the same semantic as square_check_line but tests the circle.
+    */
+{
+   double cx = (arg->x1+arg->x2)/2;
+   double wx = fabs(arg->x1-arg->x2)/2;
+   double cy = (arg->y1+arg->y2)/2;
+   double wy = fabs(arg->y1-arg->y2)/2;
+
+   if (circle_check(x, y, cx-wx-w, cy-wy-w, cx+wx+w, cy+wy+w))
+   {
+      /* Inside, but maybe too far; check for the redundant case where
+       * the lines overlap:
+       */
+      wx -= w;
+      wy -= w;
+      if (wx > 0 && wy > 0 && circle_check(x, y, cx-wx, cy-wy, cx+wx, cy+wy))
+         return INSIDE; /* between (inside) the boundary lines. */
+
+      return 0; /* inside the lines themselves. */
+   }
+
+   return OUTSIDE; /* outside the boundary lines. */
+}
+
+static int
+check_circle_filled(const struct arg *arg, double x, double y)
+{
+   return circle_check_line(arg, x, y, FILTER_WIDTH);
+}
+
+static int
+inside_circle(const struct arg *arg, double x, double y)
+{
+   return circle_check_line(arg, x, y, arg->width/2) == 0;
+}
+
+static int
+check_circle(const struct arg *arg, double x, double y)
+{
+   /* Exactly as the 'square' code.  */
+   double w = arg->width/2;
+
+   if (circle_check_line(arg, x, y, w+FILTER_WIDTH) == 0)
+   {
+      w -= FILTER_WIDTH;
+
+      if (w > 0 && circle_check_line(arg, x, y, w) == 0)
+         return INSIDE;
+
+      /* Point is somewhere in the filter region: */
+      return 0;
+   }
+
+   else /* Inside or outside the square by more than w+FILTER_WIDTH. */
+      return OUTSIDE;
+}
+
+/* "line",
+ * { NULL, NULL },  There is no 'filled' line.
+ * { inside_line, check_line }
+ */
+static int
+line_check(double x, double y, double x1, double y1, double x2, double y2,
+   double w, double expand)
+{
+   /* Shift all the points to (arg->x1, arg->y1) */
+   double lx = x2 - x1;
+   double ly = y2 - y1;
+   double len2 = lx*lx + ly*ly;
+   double cross, dot;
+
+   x -= x1;
+   y -= y1;
+
+   /* The dot product is the distance down the line, the cross product is
+    * the distance away from the line:
+    *
+    *    distance = |cross| / sqrt(len2) 
+    */
+   cross = x * ly - y * lx;
+
+   /* If 'distance' is more than w the point is definitely outside the line:
+    *
+    *     distance >= w
+    *     |cross|  >= w * sqrt(len2)
+    *     cross^2  >= w^2 * len2:
+    */
+   if (cross*cross >= (w+expand)*(w+expand)*len2)
+      return 0; /* outside */
+
+   /* Now find the distance *along* the line; this comes from the dot product
+    * lx.x+ly.y. The actual distance (in pixels) is:
+    *
+    *   distance = dot / sqrt(len2)
+    */
+   dot = lx * x + ly * y;
+
+   /* The test for 'outside' is:
+    *
+    *    distance < 0 || distance > sqrt(len2)
+    *                 -> dot / sqrt(len2) > sqrt(len2)
+    *                 -> dot > len2
+    *
+    * But 'expand' is used for the filter width and needs to be handled too:
+    */
+   return dot > -expand && dot < len2+expand;
+}
+
+static int
+inside_line(const struct arg *arg, double x, double y)
+{
+   return line_check(x, y, arg->x1, arg->y1, arg->x2, arg->y2, arg->width/2, 0);
+}
+
+static int
+check_line(const struct arg *arg, double x, double y)
+{
+   /* The end caps of the line must be checked too; it's not enough just to
+    * widen the line by FILTER_WIDTH; 'expand' exists for this purpose:
+    */
+   if (line_check(x, y, arg->x1, arg->y1, arg->x2, arg->y2, arg->width/2,
+       FILTER_WIDTH))
+   {
+      /* Inside the line+filter; far enough inside that the filter isn't
+       * required?
+       */
+      if (arg->width > 2*FILTER_WIDTH &&
+          line_check(x, y, arg->x1, arg->y1, arg->x2, arg->y2, arg->width/2,
+             -FILTER_WIDTH))
+         return INSIDE;
+
+      return 0;
+   }
+
+   return OUTSIDE;
+}
+
+static const struct
+{
+   const char    *name;
+   shape_fn_ptr   function[2/*fill,line*/][2];
+#  define         FN_INSIDE 0
+#  define         FN_CHECK 1
+} shape_defs[] =
+{
+   {  "square",
+      {  { inside_square_filled, check_square_filled },
+         { inside_square, check_square } }
+   },
+   {  "circle",
+      {  { inside_circle_filled, check_circle_filled },
+         { inside_circle, check_circle } }
+   },
+   {  "line",
+      {  { NULL, NULL },
+         { inside_line, check_line } }
+   }
+};
+
+#define shape_count ((sizeof shape_defs)/(sizeof shape_defs[0]))
+
+static shape_fn_ptr
+shape_of(const char *arg, double width, int f)
+{
+   unsigned int i;
+
+   for (i=0; i<shape_count; ++i) if (strcmp(shape_defs[i].name, arg) == 0)
+   {
+      shape_fn_ptr fn = shape_defs[i].function[width != 0][f];
+
+      if (fn != NULL)
+         return fn;
+
+      fprintf(stderr, "genpng: %s %s not supported\n",
+         width == 0 ? "filled" : "unfilled", arg);
+      exit(1);
+   }
+
+   fprintf(stderr, "genpng: %s: not a valid shape name\n", arg);
+   exit(1);
+}
+
+static void
+parse_arg(struct arg *arg, const char **argv/*7 arguments*/)
+{
+   /* shape ::= color width shape x1 y1 x2 y2 */
+   arg->color = color_of(argv[0]);
+   arg->width = width_of(argv[1]);
+   arg->inside_fn = shape_of(argv[2], arg->width, FN_INSIDE);
+   arg->check_fn = shape_of(argv[2], arg->width, FN_CHECK);
+   arg->x1 = coordinate_of(argv[3]);
+   arg->y1 = coordinate_of(argv[4]);
+   arg->x2 = coordinate_of(argv[5]);
+   arg->y2 = coordinate_of(argv[6]);
+}
+
+static png_uint_32
+read_wh(const char *name, const char *str)
+   /* read a PNG width or height */
+{
+   char *ep = NULL;
+   unsigned long ul = strtoul(str, &ep, 10);
+
+   if (ep != NULL && *ep == 0 && ul > 0 && ul <= 0x7fffffff)
+      return (png_uint_32)/*SAFE*/ul;
+
+   fprintf(stderr, "genpng: %s: invalid number %s\n", name, str);
+   exit(1);
+}
+
+static void
+pixel(png_uint_16p p, struct arg *args, int nargs, double x, double y)
+{
+   /* Fill in the pixel by checking each shape (args[nargs]) for effects on
+    * the corresponding sample:
+    */
+   double r=0, g=0, b=0, a=0;
+
+   while (--nargs >= 0 && a != 1)
+   {
+      /* NOTE: alpha_calc can return a value outside the range 0..1 with the
+       * bicubic filter.
+       */
+      const double alpha = alpha_calc(args+nargs, x, y) * (1-a);
+
+      r += alpha * args[nargs].color->red;
+      g += alpha * args[nargs].color->green;
+      b += alpha * args[nargs].color->blue;
+      a += alpha;
+   }
+
+   /* 'a' may be negative or greater than 1; if it is, negative clamp the
+    * pixel to 0 if >1 clamp r/g/b:
+    */
+   if (a > 0) 
+   {
+      if (a > 1)
+      {
+         if (r > 1) r = 1;
+         if (g > 1) g = 1;
+         if (b > 1) b = 1;
+         a = 1;
+      }
+
+      /* And fill in the pixel: */
+      p[0] = (png_uint_16)/*SAFE*/round(r * 65535);
+      p[1] = (png_uint_16)/*SAFE*/round(g * 65535);
+      p[2] = (png_uint_16)/*SAFE*/round(b * 65535);
+      p[3] = (png_uint_16)/*SAFE*/round(a * 65535);
+   }
+
+   else
+      p[3] = p[2] = p[1] = p[0] = 0;
+}
+
+int
+main(int argc, const char **argv)
+{
+   int convert_to_8bit = 0;
+
+   /* There is one option: --8bit: */
+   if (argc > 1 && strcmp(argv[1], "--8bit") == 0)
+      --argc, ++argv, convert_to_8bit = 1;
+
+   if (argc >= 3)
+   {
+      png_uint_16p buffer;
+      int nshapes;
+      png_image image;
+#     define max_shapes 256
+      struct arg arg_list[max_shapes];
+
+      /* The libpng Simplified API write code requires a fully initialized
+       * structure.
+       */
+      memset(&image, 0, sizeof image);
+      image.version = PNG_IMAGE_VERSION;
+      image.opaque = NULL;
+      image.width = read_wh("width", argv[1]);
+      image.height = read_wh("height", argv[2]);
+      image.format = PNG_FORMAT_LINEAR_RGB_ALPHA;
+      image.flags = 0;
+      image.colormap_entries = 0;
+
+      /* Check the remainder of the arguments */
+      for (nshapes=0; 3+7*(nshapes+1) <= argc && nshapes < max_shapes;
+           ++nshapes)
+         parse_arg(arg_list+nshapes, argv+3+7*nshapes);
+
+      if (3+7*nshapes != argc)
+      {
+         fprintf(stderr, "genpng: %s: too many arguments\n", argv[3+7*nshapes]);
+         return 1;
+      }
+
+      /* Create the buffer: */
+      buffer = malloc(PNG_IMAGE_SIZE(image));
+
+      if (buffer != NULL)
+      {
+         png_uint_32 y;
+
+         /* Write each row... */
+         for (y=0; y<image.height; ++y)
+         {
+            png_uint_32 x;
+
+            /* Each pixel in each row: */
+            for (x=0; x<image.width; ++x)
+               pixel(buffer + 4*(x + y*image.width), arg_list, nshapes, x, y);
+         }
+
+         /* Write the result (to stdout) */
+         if (png_image_write_to_stdio(&image, stdout, convert_to_8bit,
+             buffer, 0/*row_stride*/, NULL/*colormap*/))
+         {
+            free(buffer);
+            return 0; /* success */
+         }
+
+         else
+            fprintf(stderr, "genpng: write stdout: %s\n", image.message);
+
+         free(buffer);
+      }
+
+      else
+         fprintf(stderr, "genpng: out of memory: %lu bytes\n",
+               (unsigned long)PNG_IMAGE_SIZE(image));
+   }
+
+   else
+   {
+      /* Wrong number of arguments */
+      fprintf(stderr, "genpng: usage: genpng [--8bit] width height {shape}\n"
+         " Generate a transparent PNG in RGBA (truecolor+alpha) format\n"
+         " containing the given shape or shapes.  Shapes are defined:\n"
+         "\n"
+         "  shape ::= color width shape x1 y1 x2 y2\n"
+         "  color ::= black|white|red|green|yellow|blue\n"
+         "  color ::= brown|purple|pink|orange|gray|cyan\n"
+         "  width ::= filled|<number>\n"
+         "  shape ::= circle|square|line\n"
+         "  x1,x2 ::= <number>\n"
+         "  y1,y2 ::= <number>\n"
+         "\n"
+         " Numbers are floating point numbers describing points relative to\n"
+         " the top left of the output PNG as pixel coordinates.  The 'width'\n"
+         " parameter is either the width of the line (in output pixels) used\n"
+         " to draw the shape or 'filled' to indicate that the shape should\n"
+         " be filled with the color.\n"
+         "\n"
+         " Colors are interpreted loosely to give access to the eight full\n"
+         " intensity RGB values:\n"
+         "\n"
+         "  black, red, green, blue, yellow, cyan, purple, white,\n"
+         "\n"
+         " Cyan is full intensity blue+green; RGB(0,1,1), plus the following\n"
+         " lower intensity values:\n"
+         "\n"
+         "  brown:  red+orange:  RGB(0.5, 0.125, 0) (dark red+orange)\n"
+         "  pink:   red+white:   RGB(1.0, 0.5,   0.5)\n"
+         "  orange: red+yellow:  RGB(1.0, 0.5,   0)\n"
+         "  gray:   black+white: RGB(0.5, 0.5,   0.5)\n"
+         "\n"
+         " The RGB values are selected to make detection of aliasing errors\n"
+         " easy. The names are selected to make the description of errors\n"
+         " easy.\n"
+         "\n"
+         " The PNG is written to stdout, if --8bit is given a 32bpp RGBA sRGB\n"
+         " file is produced, otherwise a 64bpp RGBA linear encoded file is\n"
+         " written.\n");
+   }
+
+   return 1;
+}
+#endif /* SIMPLIFIED_WRITE && STDIO */
diff --git a/contrib/tools/png-fix-itxt.c b/contrib/tools/png-fix-itxt.c
index 9b09e4ff6..2754c76cc 100644
--- a/contrib/tools/png-fix-itxt.c
+++ b/contrib/tools/png-fix-itxt.c
@@ -34,8 +34,9 @@
 
 #define MAX_LENGTH 500000
 
+/* Read one character (inchar), also return octet (c), break if EOF */
 #define GETBREAK inchar=getchar(); \
-                 c=(inchar & 0xff);\
+                 c=(inchar & 0xffU);\
                  if (inchar != (int) c) break
 int
 main(void)
@@ -94,10 +95,10 @@ for (;;)
       for (;;)
       {
         /* Check the CRC */
-        if (((crc >> 24) & 0xff) == buf[length+8] &&
-            ((crc >> 16) & 0xff) == buf[length+9] &&
-            ((crc >>  8) & 0xff) == buf[length+10] &&
-            ((crc      ) & 0xff) == buf[length+11])
+        if (((crc >> 24) & 0xffU) == buf[length+8] &&
+            ((crc >> 16) & 0xffU) == buf[length+9] &&
+            ((crc >>  8) & 0xffU) == buf[length+10] &&
+            ((crc      ) & 0xffU) == buf[length+11])
            break;
 
         length++;
@@ -116,10 +117,10 @@ for (;;)
          break;
 
       /* Update length bytes */
-      buf[0] = (unsigned char)((length >> 24) & 0xff);
-      buf[1] = (unsigned char)((length >> 16) & 0xff);
-      buf[2] = (unsigned char)((length >>  8) & 0xff);
-      buf[3] = (unsigned char)((length      ) & 0xff);
+      buf[0] = (unsigned char)((length >> 24) & 0xffU);
+      buf[1] = (unsigned char)((length >> 16) & 0xffU);
+      buf[2] = (unsigned char)((length >>  8) & 0xffU);
+      buf[3] = (unsigned char)((length      ) & 0xffU);
 
       /* Write the fixed iTXt chunk (length, name, data, crc) */
       for (i=0; i<length+12; i++)
diff --git a/libpngpf.3 b/libpngpf.3
index 1bdb49975..d8b1d5a9b 100644
--- a/libpngpf.3
+++ b/libpngpf.3
@@ -1,4 +1,4 @@
-.TH LIBPNGPF 3 "June 6, 2015"
+.TH LIBPNGPF 3 "July 26, 2015"
 .SH NAME
 libpng \- Portable Network Graphics (PNG) Reference Library 1.7.0beta64
 (private functions)
diff --git a/png.5 b/png.5
index 6c485cd34..7e33da34f 100644
--- a/png.5
+++ b/png.5
@@ -1,4 +1,4 @@
-.TH PNG 5 "June 6, 2015"
+.TH PNG 5 "July 26, 2015"
 .SH NAME
 png \- Portable Network Graphics (PNG) format
 .SH DESCRIPTION
diff --git a/png.c b/png.c
index 26dd10976..6a01b5f91 100644
--- a/png.c
+++ b/png.c
@@ -689,13 +689,13 @@ png_get_copyright(png_const_structrp png_ptr)
 #else
 #  ifdef __STDC__
    return PNG_STRING_NEWLINE \
-     "libpng version 1.7.0beta64 - June 6, 2015" PNG_STRING_NEWLINE \
+     "libpng version 1.7.0beta64 - July 26, 2015" PNG_STRING_NEWLINE \
      "Copyright (c) 1998-2015 Glenn Randers-Pehrson" PNG_STRING_NEWLINE \
      "Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \
      "Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \
      PNG_STRING_NEWLINE;
 #  else
-      return "libpng version 1.7.0beta64 - June 6, 2015\
+      return "libpng version 1.7.0beta64 - July 26, 2015\
       Copyright (c) 1998-2015 Glenn Randers-Pehrson\
       Copyright (c) 1996-1997 Andreas Dilger\
       Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.";
diff --git a/pngconf.h b/pngconf.h
index df41eccb3..eefed88e8 100644
--- a/pngconf.h
+++ b/pngconf.h
@@ -1,7 +1,7 @@
 
 /* pngconf.h - machine configurable file for libpng
  *
- * libpng version 1.7.0beta64, June 6, 2015
+ * libpng version 1.7.0beta64, July 26, 2015
  *
  * Copyright (c) 1998-2015 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/projects/vstudio/readme.txt b/projects/vstudio/readme.txt
index acda7adc2..8246cf46b 100644
--- a/projects/vstudio/readme.txt
+++ b/projects/vstudio/readme.txt
@@ -1,7 +1,7 @@
 
 VisualStudio instructions
 
-libpng version 1.7.0beta64 - June 6, 2015
+libpng version 1.7.0beta64 - July 26, 2015
 
 Copyright (c) 1998-2010 Glenn Randers-Pehrson
 
diff --git a/projects/vstudio/zlib.props b/projects/vstudio/zlib.props
index 875760b34..aa7597b06 100644
--- a/projects/vstudio/zlib.props
+++ b/projects/vstudio/zlib.props
@@ -2,7 +2,7 @@
 <!--
  * zlib.props - location of zlib source
  *
- * libpng version 1.7.0beta64 - June 6, 2015
+ * libpng version 1.7.0beta64 - July 26, 2015
  *
  * Copyright (c) 1998-2011 Glenn Randers-Pehrson
  *
diff --git a/scripts/README.txt b/scripts/README.txt
index 0315b4667..9c7a15c1f 100644
--- a/scripts/README.txt
+++ b/scripts/README.txt
@@ -1,5 +1,5 @@
 
-Makefiles for  libpng version 1.7.0beta64 - June 6, 2015
+Makefiles for  libpng version 1.7.0beta64 - July 26, 2015
 
 pnglibconf.h.prebuilt       =>  Stores configuration settings
  makefile.linux    =>  Linux/ELF makefile
diff --git a/scripts/pnglibconf.h.prebuilt b/scripts/pnglibconf.h.prebuilt
index b5ef7b6a8..6e3a3781e 100644
--- a/scripts/pnglibconf.h.prebuilt
+++ b/scripts/pnglibconf.h.prebuilt
@@ -2,7 +2,7 @@
 
 /* pnglibconf.h - library build configuration */
 
-/* Libpng version 1.7.0beta64 - June 6, 2015 */
+/* Libpng version 1.7.0beta64 - July 26, 2015 */
 
 /* Copyright (c) 1998-2015 Glenn Randers-Pehrson */