path: root/patches/stand-alone

Index: libffi/ChangeLog.libffi
===================================================================
--- /dev/null
+++ libffi/ChangeLog.libffi
@@ -0,0 +1,584 @@
+2011-02-08  Andreas Tobler  <andreast@fgznet.ch>
+
+	* testsuite/lib/libffi.exp: Tweak for stand-alone mode.
+
+2009-12-25  Samuli Suominen  <ssuominen@gentoo.org>
+
+	* configure.ac: Undefine _AC_ARG_VAR_PRECIOUS for autoconf 2.64.
+	* configure: Rebuilt.
+	* fficonfig.h.in: Rebuilt.
+
+2009-06-16  Andrew Haley  <aph@redhat.com>
+
+	* testsuite/libffi.call/cls_align_sint64.c,
+	testsuite/libffi.call/cls_align_uint64.c,
+	testsuite/libffi.call/cls_longdouble_va.c,
+	testsuite/libffi.call/cls_ulonglong.c,
+	testsuite/libffi.call/return_ll1.c,
+	testsuite/libffi.call/stret_medium2.c: Fix printf format
+	specifiers.
+	* testsuite/libffi.call/huge_struct.c: Ad x86 XFAILs.
+	* testsuite/libffi.call/float2.c: Fix dg-excess-errors.
+	* testsuite/libffi.call/ffitest.h,
+	testsuite/libffi.special/ffitestcxx.h (PRIdLL, PRIuLL): Define.
+
+2009-06-12  Andrew Haley  <aph@redhat.com>
+
+	* testsuite/libffi.call/cls_align_sint64.c,
+	testsuite/libffi.call/cls_align_uint64.c,
+	testsuite/libffi.call/cls_ulonglong.c,
+	testsuite/libffi.call/return_ll1.c,
+	testsuite/libffi.call/stret_medium2.c: Fix printf format
+	specifiers.
+	testsuite/libffi.special/unwindtest.cc: include stdint.h.
+
+2009-06-11  Timothy Wall  <twall@users.sf.net>
+
+	* Makefile.am,
+        configure.ac,
+        include/ffi.h.in,
+        include/ffi_common.h,
+        src/closures.c,
+        src/dlmalloc.c,
+        src/x86/ffi.c,
+        src/x86/ffitarget.h,
+        src/x86/win64.S (new),
+	README: Added win64 support (mingw or MSVC)
+        * Makefile.in,
+        include/Makefile.in,
+        man/Makefile.in,
+        testsuite/Makefile.in,
+        configure,
+        aclocal.m4: Regenerated
+        * ltcf-c.sh: properly escape cygwin/w32 path
+        * man/ffi_call.3: Clarify size requirements for return value.
+        * src/x86/ffi64.c: Fix filename in comment.
+        * src/x86/win32.S: Remove unused extern.
+
+        * testsuite/libffi.call/closure_fn0.c,
+        testsuite/libffi.call/closure_fn1.c,
+        testsuite/libffi.call/closure_fn2.c,
+        testsuite/libffi.call/closure_fn3.c,
+        testsuite/libffi.call/closure_fn4.c,
+        testsuite/libffi.call/closure_fn5.c,
+        testsuite/libffi.call/closure_fn6.c,
+	testsuite/libffi.call/closure_stdcall.c,
+	testsuite/libffi.call/cls_12byte.c,
+	testsuite/libffi.call/cls_16byte.c,
+	testsuite/libffi.call/cls_18byte.c,
+	testsuite/libffi.call/cls_19byte.c,
+	testsuite/libffi.call/cls_1_1byte.c,
+	testsuite/libffi.call/cls_20byte.c,
+	testsuite/libffi.call/cls_20byte1.c,
+	testsuite/libffi.call/cls_24byte.c,
+	testsuite/libffi.call/cls_2byte.c,
+	testsuite/libffi.call/cls_3_1byte.c,
+	testsuite/libffi.call/cls_3byte1.c,
+ 	testsuite/libffi.call/cls_3byte2.c,
+ 	testsuite/libffi.call/cls_4_1byte.c,
+ 	testsuite/libffi.call/cls_4byte.c,
+ 	testsuite/libffi.call/cls_5_1_byte.c,
+ 	testsuite/libffi.call/cls_5byte.c,
+ 	testsuite/libffi.call/cls_64byte.c,
+ 	testsuite/libffi.call/cls_6_1_byte.c,
+ 	testsuite/libffi.call/cls_6byte.c,
+ 	testsuite/libffi.call/cls_7_1_byte.c,
+ 	testsuite/libffi.call/cls_7byte.c,
+ 	testsuite/libffi.call/cls_8byte.c,
+ 	testsuite/libffi.call/cls_9byte1.c,
+ 	testsuite/libffi.call/cls_9byte2.c,
+ 	testsuite/libffi.call/cls_align_double.c,
+ 	testsuite/libffi.call/cls_align_float.c,
+ 	testsuite/libffi.call/cls_align_longdouble.c,
+ 	testsuite/libffi.call/cls_align_longdouble_split.c,
+ 	testsuite/libffi.call/cls_align_longdouble_split2.c,
+ 	testsuite/libffi.call/cls_align_pointer.c,
+ 	testsuite/libffi.call/cls_align_sint16.c,
+ 	testsuite/libffi.call/cls_align_sint32.c,
+ 	testsuite/libffi.call/cls_align_sint64.c,
+ 	testsuite/libffi.call/cls_align_uint16.c,
+ 	testsuite/libffi.call/cls_align_uint32.c,
+ 	testsuite/libffi.call/cls_align_uint64.c,
+ 	testsuite/libffi.call/cls_dbls_struct.c,
+ 	testsuite/libffi.call/cls_double.c,
+ 	testsuite/libffi.call/cls_double_va.c,
+ 	testsuite/libffi.call/cls_float.c,
+ 	testsuite/libffi.call/cls_longdouble.c,
+ 	testsuite/libffi.call/cls_longdouble_va.c,
+ 	testsuite/libffi.call/cls_multi_schar.c,
+ 	testsuite/libffi.call/cls_multi_sshort.c,
+ 	testsuite/libffi.call/cls_multi_sshortchar.c,
+ 	testsuite/libffi.call/cls_multi_uchar.c,
+ 	testsuite/libffi.call/cls_multi_ushort.c,
+ 	testsuite/libffi.call/cls_multi_ushortchar.c,
+ 	testsuite/libffi.call/cls_pointer.c,
+ 	testsuite/libffi.call/cls_pointer_stack.c,
+ 	testsuite/libffi.call/cls_schar.c,
+ 	testsuite/libffi.call/cls_sint.c,
+ 	testsuite/libffi.call/cls_sshort.c,
+ 	testsuite/libffi.call/cls_uchar.c,
+ 	testsuite/libffi.call/cls_uint.c,
+ 	testsuite/libffi.call/cls_ulonglong.c,
+ 	testsuite/libffi.call/cls_ushort.c,
+ 	testsuite/libffi.call/err_bad_abi.c,
+ 	testsuite/libffi.call/err_bad_typedef.c,
+ 	testsuite/libffi.call/float2.c,
+ 	testsuite/libffi.call/huge_struct.c,
+ 	testsuite/libffi.call/nested_struct.c,
+ 	testsuite/libffi.call/nested_struct1.c,
+ 	testsuite/libffi.call/nested_struct10.c,
+ 	testsuite/libffi.call/nested_struct2.c,
+ 	testsuite/libffi.call/nested_struct3.c,
+ 	testsuite/libffi.call/nested_struct4.c,
+ 	testsuite/libffi.call/nested_struct5.c,
+ 	testsuite/libffi.call/nested_struct6.c,
+ 	testsuite/libffi.call/nested_struct7.c,
+ 	testsuite/libffi.call/nested_struct8.c,
+ 	testsuite/libffi.call/nested_struct9.c,
+ 	testsuite/libffi.call/problem1.c,
+ 	testsuite/libffi.call/return_ldl.c,
+ 	testsuite/libffi.call/return_ll1.c,
+ 	testsuite/libffi.call/stret_large.c,
+ 	testsuite/libffi.call/stret_large2.c,
+ 	testsuite/libffi.call/stret_medium.c,
+ 	testsuite/libffi.call/stret_medium2.c,
+        testsuite/libffi.special/unwindtest.cc: use ffi_closure_alloc instead
+        of checking for MMAP.  Use intptr_t instead of long casts.
+
+2009-06-04  Andrew Haley  <aph@redhat.com>
+
+	* src/powerpc/ffitarget.h: Fix misapplied merge from gcc.
+
+2009-06-04  Andrew Haley  <aph@redhat.com>
+
+	* src/mips/o32.S,
+	src/mips/n32.S: Fix licence formatting.
+
+2009-06-04  Andrew Haley  <aph@redhat.com>
+
+	* src/x86/darwin.S: Fix licence formatting.
+	src/x86/win32.S: Likewise.
+	src/sh64/sysv.S: Likewise.
+	src/sh/sysv.S: Likewise.
+
+2009-06-04  Andrew Haley  <aph@redhat.com>
+
+	* src/sh64/ffi.c: Remove lint directives.  Was missing from merge
+	of Andreas Tobler's patch from 2006-04-22.
+	
+2009-06-04  Andrew Haley  <aph@redhat.com>
+
+	* src/sh/ffi.c: Apply missing hunk from Alexandre Oliva's patch of
+	2007-03-07.
+
+2008-12-26  Timothy Wall  <twall@users.sf.net>
+
+	* testsuite/libffi.call/cls_longdouble.c,
+        testsuite/libffi.call/cls_longdouble_va.c,
+        testsuite/libffi.call/cls_align_longdouble.c,
+        testsuite/libffi.call/cls_align_longdouble_split.c,
+        testsuite/libffi.call/cls_align_longdouble_split2.c: mark expected
+        failures on x86_64 cygwin/mingw.
+
+2008-12-22  Timothy Wall  <twall@users.sf.net>
+
+	* testsuite/libffi.call/closure_fn0.c,
+        testsuite/libffi.call/closure_fn1.c,    
+        testsuite/libffi.call/closure_fn2.c,    
+        testsuite/libffi.call/closure_fn3.c,    
+        testsuite/libffi.call/closure_fn4.c,    
+        testsuite/libffi.call/closure_fn5.c,    
+        testsuite/libffi.call/closure_fn6.c,    
+        testsuite/libffi.call/closure_loc_fn0.c,    
+        testsuite/libffi.call/closure_stdcall.c,    
+        testsuite/libffi.call/cls_align_pointer.c,    
+        testsuite/libffi.call/cls_pointer.c,    
+        testsuite/libffi.call/cls_pointer_stack.c: use portable cast from
+        pointer to integer (intptr_t).
+        * testsuite/libffi.call/cls_longdouble.c: disable for win64.
+	
+2008-12-19  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.8.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-11-11  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.7.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-08-25  Andreas Tobler  <a.tobler@schweiz.org>
+
+	* src/powerpc/ffitarget.h (ffi_abi): Add FFI_LINUX and
+	FFI_LINUX_SOFT_FLOAT to the POWERPC_FREEBSD enum.
+	Add note about flag bits used for FFI_SYSV_TYPE_SMALL_STRUCT.
+	Adjust copyright notice.
+	* src/powerpc/ffi.c: Add two new flags to indicate if we have one
+	register or two register to use for FFI_SYSV structs.
+	(ffi_prep_cif_machdep): Pass the right register flag introduced above.
+	(ffi_closure_helper_SYSV): Fix the return type for
+	FFI_SYSV_TYPE_SMALL_STRUCT. Comment.
+	Adjust copyright notice.
+
+2008-07-24  Anthony Green  <green@redhat.com>
+
+	* testsuite/libffi.call/cls_dbls_struct.c,
+	testsuite/libffi.call/cls_double_va.c,
+	testsuite/libffi.call/cls_longdouble.c,
+	testsuite/libffi.call/cls_longdouble_va.c,
+	testsuite/libffi.call/cls_pointer.c,
+	testsuite/libffi.call/cls_pointer_stack.c,
+	testsuite/libffi.call/err_bad_abi.c: Clean up failures from
+	compiler warnings.
+
+2008-07-17  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.6.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.  Add documentation.
+	* README: Update for new release.
+
+2008-07-16  Kaz Kojima  <kkojima@gcc.gnu.org>
+
+	* src/sh/ffi.c (ffi_prep_closure_loc): Turn INSN into an unsigned
+	int.
+
+2008-07-16  Kaz Kojima  <kkojima@gcc.gnu.org>
+
+	* src/sh/sysv.S: Add .note.GNU-stack on Linux.
+	* src/sh64/sysv.S: Likewise.
+
+2008-04-03  Anthony Green  <green@redhat.com>
+
+	* libffi.pc.in (Libs): Add -L${libdir}.
+	* configure.ac: Bump version to 3.0.5.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-04-03  Anthony Green  <green@redhat.com>
+	    Xerces Ranby  <xerxes@zafena.se>
+
+	* include/ffi.h.in: Wrap definition of target architecture to
+	protect from double definitions.
+
+2008-03-22  Moriyoshi Koizumi  <moriyoshi@gmail.com>
+
+	* src/x86/ffi.c (ffi_prep_closure_loc): Fix for bug revealed in
+	closure_loc_fn0.c.
+	* testsuite/libffi.call/closure_loc_fn0.c (closure_loc_test_fn0):
+	New test.
+
+2008-03-04  Anthony Green  <green@redhat.com>
+	    Blake Chaffin
+	    hos@tamanegi.org
+
+	* testsuite/libffi.call/cls_align_longdouble_split2.c
+          testsuite/libffi.call/cls_align_longdouble_split.c
+          testsuite/libffi.call/cls_dbls_struct.c
+          testsuite/libffi.call/cls_double_va.c
+          testsuite/libffi.call/cls_longdouble.c
+          testsuite/libffi.call/cls_longdouble_va.c
+          testsuite/libffi.call/cls_pointer.c
+          testsuite/libffi.call/cls_pointer_stack.c
+          testsuite/libffi.call/err_bad_abi.c
+          testsuite/libffi.call/err_bad_typedef.c
+          testsuite/libffi.call/huge_struct.c
+          testsuite/libffi.call/stret_large2.c
+          testsuite/libffi.call/stret_large.c
+          testsuite/libffi.call/stret_medium2.c
+          testsuite/libffi.call/stret_medium.c: New tests from Apple.
+
+2008-02-26  Jakub Jelinek  <jakub@redhat.com>
+            Anthony Green  <green@redhat.com>
+
+	* src/alpha/osf.S: Add .note.GNU-stack on Linux.
+	* src/s390/sysv.S: Likewise.
+	* src/powerpc/linux64.S: Likewise.
+	* src/powerpc/linux64_closure.S: Likewise.
+	* src/powerpc/ppc_closure.S: Likewise.
+	* src/powerpc/sysv.S: Likewise.
+	* src/x86/unix64.S: Likewise.
+	* src/x86/sysv.S: Likewise.
+	* src/sparc/v8.S: Likewise.
+	* src/sparc/v9.S: Likewise.
+	* src/m68k/sysv.S: Likewise.
+	* src/ia64/unix.S: Likewise.
+	* src/arm/sysv.S: Likewise.
+
+2008-02-26  Anthony Green  <green@redhat.com>
+            Thomas Heller  <theller@ctypes.org>
+
+	* src/x86/ffi.c (ffi_closure_SYSV_inner): Change C++ comment to C
+	comment.
+
+2008-02-26  Anthony Green  <green@redhat.org>
+            Thomas Heller  <theller@ctypes.org>
+
+	* include/ffi.h.in: Change void (*)() to void (*)(void).
+
+2008-02-26  Anthony Green  <green@redhat.org>
+            Thomas Heller  <theller@ctypes.org>
+
+	* src/alpha/ffi.c: Change void (*)() to void (*)(void).
+	src/alpha/osf.S, src/arm/ffi.c, src/frv/ffi.c, src/ia64/ffi.c,
+	src/ia64/unix.S, src/java_raw_api.c, src/m32r/ffi.c,
+	src/mips/ffi.c, src/pa/ffi.c, src/pa/hpux32.S, src/pa/linux.S,
+	src/powerpc/ffi.c, src/powerpc/ffi_darwin.c, src/raw_api.c,
+	src/s390/ffi.c, src/sh/ffi.c, src/sh64/ffi.c, src/sparc/ffi.c,
+	src/x86/ffi.c, src/x86/unix64.S, src/x86/darwin64.S,
+	src/x86/ffi64.c: Ditto.
+
+2008-02-24  Anthony Green  <green@redhat.org>
+
+	* configure.ac: Accept openbsd*, not just openbsd.
+	Bump version to 3.0.4.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-02-22  Anthony Green  <green@redhat.com>
+
+	* README: Clean up list of tested platforms.
+
+2008-02-22  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.3.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.  Clean up test docs.
+
+2008-02-22  Bjoern Koenig  <bkoenig@alpha-tierchen.de>
+	    Andreas Tobler  <a.tobler@schweiz.org>
+
+	* configure.ac: Add amd64-*-freebsd* target.
+	* configure: Regenerate.
+
+2008-02-22  Thomas Heller <theller@ctypes.org>
+
+	* configure.ac: Add x86 OpenBSD support.
+	* configure: Rebuilt.
+
+2008-02-21  Thomas Heller <theller@ctypes.org>
+
+	* README: Change "make test" to "make check".
+
+2008-02-21  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.2.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-02-21  Björn König <bkoenig@alpha-tierchen.de>
+
+	* src/x86/freebsd.S: New file.
+	* configure.ac: Add x86 FreeBSD support.
+	* Makefile.am: Ditto.
+
+2008-02-15  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.1.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* libtool-version: Increment revision.
+	* README: Update for new release.
+
+2008-02-15  David Daney	 <ddaney@avtrex.com>
+
+	* src/mips/ffi.c: Remove extra '>' from include directive.
+	(ffi_prep_closure_loc): Use clear_location instead of tramp.
+
+2008-02-15  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 3.0.0.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+
+2008-02-15  David Daney	 <ddaney@avtrex.com>
+
+	* src/mips/ffi.c (USE__BUILTIN___CLEAR_CACHE):
+	Define (conditionally), and use it to include cachectl.h.
+	(ffi_prep_closure_loc): Fix cache flushing.
+	* src/mips/ffitarget.h (_ABIN32, _ABI64, _ABIO32): Define.
+
+2008-02-15  Anthony Green  <green@redhat.com>
+
+        * man/ffi_call.3, man/ffi_prep_cif.3, man/ffi.3:
+	Update dates and remove all references to ffi_prep_closure.
+	* configure.ac: Bump version to 2.99.9.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+
+2008-02-15  Anthony Green  <green@redhat.com>
+
+	* man/ffi_prep_closure.3: Delete.
+	* man/Makefile.am (EXTRA_DIST): Remove ffi_prep_closure.3.
+	(man_MANS): Ditto.
+	* man/Makefile.in: Rebuilt.
+	* configure.ac: Bump version to 2.99.8.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 2.99.7.
+	* configure, doc/stamp-vti, doc/version.texi: Rebuilt.
+	* include/ffi.h.in LICENSE src/debug.c src/closures.c
+          src/ffitest.c src/s390/sysv.S src/s390/ffitarget.h
+          src/types.c src/m68k/ffitarget.h src/raw_api.c src/frv/ffi.c
+          src/frv/ffitarget.h src/sh/ffi.c src/sh/sysv.S
+          src/sh/ffitarget.h src/powerpc/ffitarget.h src/pa/ffi.c
+          src/pa/ffitarget.h src/pa/linux.S src/java_raw_api.c
+          src/cris/ffitarget.h src/x86/ffi.c src/x86/sysv.S
+          src/x86/unix64.S src/x86/win32.S src/x86/ffitarget.h
+          src/x86/ffi64.c src/x86/darwin.S src/ia64/ffi.c
+          src/ia64/ffitarget.h src/ia64/ia64_flags.h src/ia64/unix.S
+          src/sparc/ffi.c src/sparc/v9.S src/sparc/ffitarget.h
+          src/sparc/v8.S src/alpha/ffi.c src/alpha/ffitarget.h
+          src/alpha/osf.S src/sh64/ffi.c src/sh64/sysv.S
+          src/sh64/ffitarget.h src/mips/ffi.c src/mips/ffitarget.h
+          src/mips/n32.S src/mips/o32.S src/arm/ffi.c src/arm/sysv.S
+          src/arm/ffitarget.h src/prep_cif.c: Update license text.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* README: Update tested platforms.
+	* configure.ac: Bump version to 2.99.6.
+	* configure: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* configure.ac: Bump version to 2.99.5.
+	* configure: Rebuilt.
+	* Makefile.am (EXTRA_DIST): Add darwin64.S
+	* Makefile.in: Rebuilt.
+	* testsuite/lib/libffi-dg.exp: Remove libstdc++ bits from GCC tree.
+	* LICENSE: Update WARRANTY.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* libffi.pc.in (libdir): Fix libdir definition.
+	* configure.ac: Bump version to 2.99.4.
+	* configure: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* README: Update.
+	* libffi.info: New file.
+	* doc/stamp-vti: New file.
+	* configure.ac: Bump version to 2.99.3.
+	* configure: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* Makefile.am (SUBDIRS): Add man dir.
+	* Makefile.in: Rebuilt.
+	* configure.ac: Create Makefile.
+	* configure: Rebuilt.
+        * man/ffi_call.3 man/ffi_prep_cif.3 man/ffi_prep_closure.3
+          man/Makefile.am man/Makefile.in: New files.
+
+2008-02-14  Tom Tromey  <tromey@redhat.com>
+
+	* aclocal.m4, Makefile.in, configure, fficonfig.h.in: Rebuilt.
+	* mdate-sh, texinfo.tex: New files.
+	* Makefile.am (info_TEXINFOS): New variable.
+	* doc/libffi.texi: New file.
+	* doc/version.texi: Likewise.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* Makefile.am (AM_CFLAGS): Don't compile with -D$(TARGET).
+	(lib_LTLIBRARIES): Define.
+	(toolexeclib_LIBRARIES): Undefine.
+	* Makefile.in: Rebuilt.
+	* configure.ac: Reset version to 2.99.1.
+	* configure.in: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* libffi.pc.in: Use @PACKAGE_NAME@ and @PACKAGE_VERSION@.
+	* configure.ac: Reset version to 2.99.1.
+	* configure.in: Rebuilt.
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.libffi.
+	* Makefile.in: Rebuilt.
+	* LICENSE: Update copyright notice.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* include/Makefile.am (nodist_includes_HEADERS): Define.  Don't
+	distribute ffitarget.h or ffi.h from the build include dir.
+	* Makefile.in: Rebuilt.
+
+2008-02-14  Anthony Green  <green@redhat.com>
+
+	* include/Makefile.am (includesdir): Install headers under libdir.
+	(pkgconfigdir): Define. Install libffi.pc.
+	* include/Makefile.in: Rebuilt.
+	* libffi.pc.in: Create.
+	* libtool-version: Increment CURRENT
+	* configure.ac: Add libffi.pc.in
+	* configure: Rebuilt.
+
+2008-02-03  Anthony Green  <green@redhat.com>
+
+	* include/Makefile.am (includesdir): Fix header install with
+	DESTDIR.
+	* include/Makefile.in: Rebuilt.
+
+2008-02-03  Timothy Wall  <twall@users.sf.net>
+
+	* src/x86/ffi.c (FFI_INIT_TRAMPOLINE_STDCALL): Calculate jump return
+          offset based on code pointer, not data pointer.
+
+2008-02-01  Anthony Green  <green@redhat.com>
+
+	* include/Makefile.am: Fix header installs.
+	* Makefile.am: Ditto.
+	* include/Makefile.in: Rebuilt.
+	* Makefile.in: Ditto.
+
+2008-02-01  Anthony Green  <green@redhat.com>
+
+	* src/x86/ffi.c (FFI_INIT_TRAMPOLINE_STDCALL,
+	FFI_INIT_TRAMPOLINE): Revert my broken changes to twall's last
+	patch.
+
+2008-01-31  Anthony Green  <green@redhat.com>
+
+	* Makefile.am (EXTRA_DIST): Add missing files.
+	* testsuite/Makefile.am: Ditto.
+	* Makefile.in, testsuite/Makefile.in: Rebuilt.
+
+2008-01-31  Timothy Wall <twall@users.sf.net>
+
+	* testsuite/libffi.call/closure_stdcall.c: Add test for stdcall
+	closures.
+	* src/x86/ffitarget.h: Increase size of trampoline for stdcall
+	closures.
+	* src/x86/win32.S: Add assembly for stdcall closure.
+	* src/x86/ffi.c: Initialize stdcall closure trampoline.
+
+2008-01-30  H.J. Lu <hongjiu.lu@intel.com>
+
+	PR libffi/34612
+	* src/x86/sysv.S (ffi_closure_SYSV): Pop 4 byte from stack when
+	returning struct.
+
+	* testsuite/libffi.call/call.exp: Add "-O2 -fomit-frame-pointer"
+	tests.
+
+2008-01-30  Anthony Green  <green@redhat.com>
+
+	* Makefile.am, include/Makefile.am: Move headers to
+	libffi_la_SOURCES for new automake.
+	* Makefile.in, include/Makefile.in: Rebuilt.
+	
+	* testsuite/lib/wrapper.exp: Copied from gcc tree to allow for 
+	execution outside of gcc tree.
+	* testsuite/lib/target-libpath.exp: Ditto.
+
+	* testsuite/lib/libffi-dg.exp: Many changes to allow for execution
+	outside of gcc tree.
+
Index: libffi/LICENSE
===================================================================
--- libffi.orig/LICENSE
+++ libffi/LICENSE
@@ -1,4 +1,5 @@
-libffi - Copyright (c) 1996-2003  Red Hat, Inc.
+libffi - Copyright (c) 1996-2009  Anthony Green, Red Hat, Inc and others.  
+See source files for details.
 
 Permission is hereby granted, free of charge, to any person obtaining
 a copy of this software and associated documentation files (the
@@ -11,10 +12,10 @@ the following conditions:
 The above copyright notice and this permission notice shall be included
 in all copies or substantial portions of the Software.
 
-THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
-OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL CYGNUS SOLUTIONS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Index: libffi/Makefile.am
===================================================================
--- libffi.orig/Makefile.am
+++ libffi/Makefile.am
@@ -1,7 +1,6 @@
 ## Process this with automake to create Makefile.in
 
 AUTOMAKE_OPTIONS = foreign subdir-objects
-ACLOCAL_AMFLAGS = -I .. -I ../config
 
 SUBDIRS = include testsuite man
 
@@ -28,10 +27,16 @@ EXTRA_DIST = LICENSE ChangeLog.v1 Change
 	src/sparc/v8.S src/sparc/v9.S src/sparc/ffitarget.h \
 	src/sparc/ffi.c src/x86/darwin64.S \
 	src/x86/ffi.c src/x86/sysv.S src/x86/win32.S src/x86/darwin.S \
+	src/x86/win64.S src/x86/freebsd.S \
 	src/x86/ffi64.c src/x86/unix64.S src/x86/ffitarget.h \
 	src/pa/ffitarget.h src/pa/ffi.c src/pa/linux.S src/pa/hpux32.S \
-	src/frv/ffi.c src/frv/eabi.S src/frv/ffitarget.h src/dlmalloc.c \
-	src/moxie/ffi.c src/moxie/eabi.S
+	src/frv/ffi.c src/frv/eabi.S src/frv/ffitarget.h \
+	src/dlmalloc.c \
+	src/moxie/ffi.c src/moxie/eabi.S \
+	libtool-version ChangeLog.libffi m4/libtool.m4 \
+	m4/lt~obsolete.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4
+
+info_TEXINFOS = doc/libffi.texi
 
 ## ################################################################
 
@@ -79,12 +84,17 @@ AM_MAKEFLAGS = \
 
 MAKEOVERRIDES=
 
-toolexeclib_LTLIBRARIES = libffi.la
+ACLOCAL_AMFLAGS=$(ACLOCAL_AMFLAGS) -I m4
+
+lib_LTLIBRARIES = libffi.la
 noinst_LTLIBRARIES = libffi_convenience.la
 
 libffi_la_SOURCES = src/debug.c src/prep_cif.c src/types.c \
 		src/raw_api.c src/java_raw_api.c src/closures.c
 
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libffi.pc
+
 nodist_libffi_la_SOURCES =
 
 if MIPS
@@ -171,17 +181,12 @@ nodist_libffi_convenience_la_SOURCES = $
 
 AM_CFLAGS = -Wall -g -fexceptions
 
-LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))
-
 libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
 
 AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src
 AM_CCASFLAGS = $(AM_CPPFLAGS)
 
-# Multilib support.  Automake should provide these on its own.
-all-recursive: all-multi
-install-recursive: install-multi
-mostlyclean-recursive: mostlyclean-multi
-clean-recursive: clean-multi
-distclean-recursive: distclean-multi
-maintainer-clean-recursive: maintainer-clean-multi
+# No install-html or install-pdf support in automake yet
+.PHONY: install-html install-pdf
+install-html:
+install-pdf:
Index: libffi/configure
===================================================================
--- libffi.orig/configure
+++ libffi/configure
@@ -1,13 +1,15 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64 for libffi 3.0.9.
+# Generated by GNU Autoconf 2.68 for libffi 3.0.11-rc2.
+#
+# Report bugs to <http://github.com/atgreen/libffi/issues>.
 #
-# Report bugs to <http://gcc.gnu.org/bugs.html>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
 # Foundation, Inc.
 #
+#
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## -------------------- ##
@@ -89,6 +91,7 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -222,11 +225,18 @@ IFS=$as_save_IFS
   # We cannot yet assume a decent shell, so we have to provide a
 	# neutralization value for shells without unset; and this also
 	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
 	BASH_ENV=/dev/null
 	ENV=/dev/null
 	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
-	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
 fi
 
     if test x$as_have_required = xno; then :
@@ -237,8 +247,8 @@ fi
     $as_echo "$0: be upgraded to zsh 4.3.4 or later."
   else
     $as_echo "$0: Please tell bug-autoconf@gnu.org and
-$0: http://gcc.gnu.org/bugs.html about your system,
-$0: including any error possibly output before this
+$0: http://github.com/atgreen/libffi/issues about your
+$0: system, including any error possibly output before this
 $0: message. Then install a modern shell, or manually run
 $0: the script under such a shell if you do have one."
   fi
@@ -325,7 +335,7 @@ $as_echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -365,19 +375,19 @@ else
 fi # as_fn_arith
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -537,10 +547,11 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr
 SHELL=${CONFIG_SHELL-/bin/sh}
 
 
-exec 7<&0 </dev/null 6>&1
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
 
 # Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
@@ -559,9 +570,9 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='libffi'
 PACKAGE_TARNAME='libffi'
-PACKAGE_VERSION='3.0.9'
-PACKAGE_STRING='libffi 3.0.9'
-PACKAGE_BUGREPORT='http://gcc.gnu.org/bugs.html'
+PACKAGE_VERSION='3.0.11-rc2'
+PACKAGE_STRING='libffi 3.0.11-rc2'
+PACKAGE_BUGREPORT='http://github.com/atgreen/libffi/issues'
 PACKAGE_URL=''
 
 # Factoring default headers for most tests.
@@ -640,6 +651,8 @@ POWERPC_AIX_FALSE
 POWERPC_AIX_TRUE
 POWERPC_FALSE
 POWERPC_TRUE
+MOXIE_FALSE
+MOXIE_TRUE
 M68K_FALSE
 M68K_TRUE
 M32R_FALSE
@@ -675,8 +688,11 @@ OTOOL
 LIPO
 NMEDIT
 DSYMUTIL
+MANIFEST_TOOL
 RANLIB
+ac_ct_AR
 AR
+DLLTOOL
 OBJDUMP
 LN_S
 NM
@@ -744,7 +760,6 @@ build_os
 build_vendor
 build_cpu
 build
-multi_basedir
 target_alias
 host_alias
 build_alias
@@ -786,13 +801,13 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
-enable_multilib
 enable_dependency_tracking
 enable_shared
 enable_static
 with_pic
 enable_fast_install
 with_gnu_ld
+with_sysroot
 enable_libtool_lock
 enable_maintainer_mode
 enable_debug
@@ -869,8 +884,9 @@ do
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -915,7 +931,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -941,7 +957,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1145,7 +1161,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1161,7 +1177,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1191,8 +1207,8 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
     ;;
 
   *=*)
@@ -1200,7 +1216,7 @@ Try \`$0 --help' for more information."
     # Reject names that are not valid shell variable names.
     case $ac_envvar in #(
       '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
     esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
@@ -1210,7 +1226,7 @@ Try \`$0 --help' for more information."
     $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
     ;;
 
   esac
@@ -1218,13 +1234,13 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error "missing argument to $ac_option"
+  as_fn_error $? "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1247,7 +1263,7 @@ do
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1261,8 +1277,8 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1277,9 +1293,9 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error "working directory cannot be determined"
+  as_fn_error $? "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error "pwd does not report name of working directory"
+  as_fn_error $? "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1318,11 +1334,11 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1348,7 +1364,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libffi 3.0.9 to adapt to many kinds of systems.
+\`configure' configures libffi 3.0.11-rc2 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1362,7 +1378,7 @@ Configuration:
       --help=short        display options specific to this package
       --help=recursive    display the short help of all the included packages
   -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
+  -q, --quiet, --silent   do not print \`checking ...' messages
       --cache-file=FILE   cache test results in FILE [disabled]
   -C, --config-cache      alias for \`--cache-file=config.cache'
   -n, --no-create         do not create output files
@@ -1419,7 +1435,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libffi 3.0.9:";;
+     short | recursive ) echo "Configuration of libffi 3.0.11-rc2:";;
    esac
   cat <<\_ACEOF
 
@@ -1427,7 +1443,6 @@ Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-multilib       build many library versions (default)
   --disable-dependency-tracking  speeds up one-time build
   --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-shared[=PKGS]  build shared libraries [default=yes]
@@ -1448,6 +1463,8 @@ Optional Packages:
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
 
 Some influential environment variables:
   CC          C compiler command
@@ -1455,7 +1472,7 @@ Some influential environment variables:
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
   LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
   CCAS        assembler compiler command (defaults to CC)
   CCASFLAGS   assembler compiler flags (defaults to CFLAGS)
@@ -1464,7 +1481,7 @@ Some influential environment variables:
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
-Report bugs to <http://gcc.gnu.org/bugs.html>.
+Report bugs to <http://github.com/atgreen/libffi/issues>.
 _ACEOF
 ac_status=$?
 fi
@@ -1527,10 +1544,10 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libffi configure 3.0.9
-generated by GNU Autoconf 2.64
+libffi configure 3.0.11-rc2
+generated by GNU Autoconf 2.68
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1574,8 +1591,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  return $ac_retval
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_compile
 
@@ -1620,8 +1637,8 @@ fi
   # interfere with the next link command; also delete a directory that is
   # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  return $ac_retval
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_link
 
@@ -1634,7 +1651,7 @@ ac_fn_c_check_header_compile ()
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1652,7 +1669,7 @@ fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_header_compile
 
@@ -1677,7 +1694,7 @@ $as_echo "$ac_try_echo"; } >&5
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1688,8 +1705,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  return $ac_retval
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_cpp
 
@@ -1730,8 +1747,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
        ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  return $ac_retval
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_run
 
@@ -1743,7 +1760,7 @@ ac_fn_c_check_func ()
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1798,7 +1815,7 @@ fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_func
 
@@ -1810,10 +1827,10 @@ $as_echo "$ac_res" >&6; }
 ac_fn_c_check_header_mongrel ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  if eval \${$3+:} false; then :
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 fi
 eval ac_res=\$$3
@@ -1849,7 +1866,7 @@ if ac_fn_c_try_cpp "$LINENO"; then :
 else
   ac_header_preproc=no
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
 $as_echo "$ac_header_preproc" >&6; }
 
@@ -1872,17 +1889,15 @@ $as_echo "$as_me: WARNING: $2: see the A
 $as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( cat <<\_ASBOX
-## ------------------------------------------- ##
-## Report this to http://gcc.gnu.org/bugs.html ##
-## ------------------------------------------- ##
-_ASBOX
+( $as_echo "## ------------------------------------------------------ ##
+## Report this to http://github.com/atgreen/libffi/issues ##
+## ------------------------------------------------------ ##"
      ) | sed "s/^/$as_me: WARNING:     /" >&2
     ;;
 esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=\$ac_header_compiler"
@@ -1891,10 +1906,64 @@ eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_header_mongrel
 
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
 # ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
 # --------------------------------------------
 # Tries to find the compile-time value of EXPR in a program that includes
@@ -2068,16 +2137,16 @@ rm -f core *.core core.conftest.* gmon.o
 rm -f conftest.val
 
   fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  return $ac_retval
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
 
 } # ac_fn_c_compute_int
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libffi $as_me 3.0.9, which was
-generated by GNU Autoconf 2.64.  Invocation command line was
+It was created by libffi $as_me 3.0.11-rc2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
 
   $ $0 $@
 
@@ -2187,11 +2256,9 @@ trap 'exit_status=$?
   {
     echo
 
-    cat <<\_ASBOX
-## ---------------- ##
+    $as_echo "## ---------------- ##
 ## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
     echo
     # The following way of writing the cache mishandles newlines in values,
 (
@@ -2225,11 +2292,9 @@ $as_echo "$as_me: WARNING: cache variabl
 )
     echo
 
-    cat <<\_ASBOX
-## ----------------- ##
+    $as_echo "## ----------------- ##
 ## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
     echo
     for ac_var in $ac_subst_vars
     do
@@ -2242,11 +2307,9 @@ _ASBOX
     echo
 
     if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
+      $as_echo "## ------------------- ##
 ## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
       echo
       for ac_var in $ac_subst_files
       do
@@ -2260,11 +2323,9 @@ _ASBOX
     fi
 
     if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
+      $as_echo "## ----------- ##
 ## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
       echo
       cat confdefs.h
       echo
@@ -2319,7 +2380,12 @@ _ACEOF
 ac_site_file1=NONE
 ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
 elif test "x$prefix" != xNONE; then
   ac_site_file1=$prefix/share/config.site
   ac_site_file2=$prefix/etc/config.site
@@ -2330,18 +2396,22 @@ fi
 for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
   test "x$ac_site_file" = xNONE && continue
-  if test -r "$ac_site_file"; then
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 $as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
 if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
 $as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
@@ -2410,7 +2480,7 @@ if $ac_cache_corrupted; then
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
   { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
 ## -------------------- ##
 ## Main body of script. ##
@@ -2423,62 +2493,27 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-
-
-
 ac_config_headers="$ac_config_headers fficonfig.h"
 
 
-# Default to --enable-multilib
-# Check whether --enable-multilib was given.
-if test "${enable_multilib+set}" = set; then :
-  enableval=$enable_multilib; case "$enableval" in
-  yes) multilib=yes ;;
-  no)  multilib=no ;;
-  *)   as_fn_error "bad value $enableval for multilib option" "$LINENO" 5 ;;
- esac
-else
-  multilib=yes
-fi
-
-
-# We may get other options which we leave undocumented:
-# --with-target-subdir, --with-multisrctop, --with-multisubdir
-# See config-ml.in if you want the gory details.
-
-if test "$srcdir" = "."; then
-  if test "$with_target_subdir" != "."; then
-    multi_basedir="$srcdir/$with_multisrctop../.."
-  else
-    multi_basedir="$srcdir/$with_multisrctop.."
-  fi
-else
-  multi_basedir="$srcdir/.."
-fi
-
-
-# Even if the default multilib is not a cross compilation,
-# it may be that some of the other multilibs are.
-if test $cross_compiling = no && test $multilib = yes \
-   && test "x${with_multisubdir}" != x ; then
-   cross_compiling=maybe
-fi
-
-ac_config_commands="$ac_config_commands default-1"
-
-
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  for ac_t in install-sh install.sh shtool; do
-    if test -f "$ac_dir/$ac_t"; then
-      ac_aux_dir=$ac_dir
-      ac_install_sh="$ac_aux_dir/$ac_t -c"
-      break 2
-    fi
-  done
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
 done
 if test -z "$ac_aux_dir"; then
-  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -2492,27 +2527,27 @@ ac_configure="$SHELL $ac_aux_dir/configu
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
+if ${ac_cv_build+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -2530,14 +2565,14 @@ case $build_os in *\ *) build_os=`echo "
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
+if ${ac_cv_host+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -2545,7 +2580,7 @@ fi
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -2563,14 +2598,14 @@ case $host_os in *\ *) host_os=`echo "$h
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
 $as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
+if ${ac_cv_target+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$target_alias" = x; then
   ac_cv_target=$ac_cv_host
 else
   ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -2578,7 +2613,7 @@ fi
 $as_echo "$ac_cv_target" >&6; }
 case $ac_cv_target in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
 esac
 target=$ac_cv_target
 ac_save_IFS=$IFS; IFS='-'
@@ -2624,7 +2659,7 @@ am__api_version='1.11'
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2711,11 +2746,11 @@ am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
 esac
 
 # Do `set' in a subshell so we don't clobber the current shell's
@@ -2737,7 +2772,7 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" "$LINENO" 5
    fi
 
@@ -2747,7 +2782,7 @@ then
    # Ok.
    :
 else
-   as_fn_error "newly created file is older than distributed files!
+   as_fn_error $? "newly created file is older than distributed files!
 Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -2801,7 +2836,7 @@ if test "$cross_compiling" != no; then
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -2841,7 +2876,7 @@ if test -z "$ac_cv_prog_STRIP"; then
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -2894,7 +2929,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then :
+  if ${ac_cv_path_mkdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2919,6 +2954,7 @@ IFS=$as_save_IFS
 
 fi
 
+  test -d ./--version && rmdir ./--version
   if test "${ac_cv_path_mkdir+set}" = set; then
     MKDIR_P="$ac_cv_path_mkdir -p"
   else
@@ -2926,7 +2962,6 @@ fi
     # value for MKDIR_P within a source directory, because that will
     # break other packages using the cache if that directory is
     # removed, or if the value is a relative name.
-    test -d ./--version && rmdir ./--version
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
@@ -2945,7 +2980,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -2985,7 +3020,7 @@ done
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -2993,7 +3028,7 @@ SHELL = /bin/sh
 all:
 	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
 case `${MAKE-make} -f conftest.make 2>/dev/null` in
   *@@@%%%=?*=@@@%%%*)
     eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -3027,7 +3062,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -3043,7 +3078,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libffi'
- VERSION='3.0.9'
+ VERSION='3.0.11-rc2'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3101,7 +3136,7 @@ if test -n "$ac_tool_prefix"; then
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3141,7 +3176,7 @@ if test -z "$ac_cv_prog_CC"; then
 set dummy gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3194,7 +3229,7 @@ if test -z "$CC"; then
 set dummy ${ac_tool_prefix}cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3234,7 +3269,7 @@ if test -z "$CC"; then
 set dummy cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3293,7 +3328,7 @@ if test -z "$CC"; then
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3337,7 +3372,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3391,8 +3426,8 @@ fi
 
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3413,8 +3448,8 @@ $as_echo "$ac_try_echo"; } >&5
 ... rest of stderr output deleted ...
          10q' conftest.err >conftest.er1
     cat conftest.er1 >&5
-    rm -f conftest.er1 conftest.err
   fi
+  rm -f conftest.er1 conftest.err
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
 done
@@ -3431,12 +3466,12 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
 ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 
 # The possible output files:
@@ -3498,62 +3533,28 @@ test "$ac_cv_exeext" = no && ac_cv_exeex
 else
   ac_file=''
 fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
 if test -z "$ac_file"; then :
-  $as_echo "$as_me: failed program was:" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
 ac_exeext=$ac_cv_exeext
 
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
 $as_echo_n "checking for suffix of executables... " >&6; }
 if { { ac_try="$ac_link"
@@ -3583,19 +3584,78 @@ done
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
 fi
-rm -f conftest$ac_cv_exeext
+rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
 $as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3635,8 +3695,8 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -3646,7 +3706,7 @@ OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3683,7 +3743,7 @@ ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
@@ -3761,7 +3821,7 @@ else
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
@@ -3922,7 +3982,7 @@ depcc="$CC"   am_compiler_list=
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4049,6 +4109,7 @@ fi
 
 
 
+
 # By default we simply use the C compiler to build assembly code.
 
 test "${CCAS+set}" = set || CCAS=$CC
@@ -4060,7 +4121,7 @@ depcc="$CCAS"   am_compiler_list=
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CCAS_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4190,7 +4251,7 @@ $as_echo_n "checking whether cc understa
 fi
 set dummy $CC; ac_cc=`$as_echo "$2" |
 		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4315,8 +4376,8 @@ esac
 
 
 
-macro_version='2.2.7a'
-macro_revision='1.3134'
+macro_version='2.4'
+macro_revision='1.3293'
 
 
 
@@ -4356,7 +4417,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
 $as_echo_n "checking how to print strings... " >&6; }
 # Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
    test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
   ECHO='print -r --'
 elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
@@ -4403,7 +4464,7 @@ esac
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
   $as_echo_n "(cached) " >&6
 else
             ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -4458,7 +4519,7 @@ esac
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_SED"; then
-    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
   fi
 else
   ac_cv_path_SED=$SED
@@ -4485,7 +4546,7 @@ Xsed="$SED -e 1s/^X//"
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -4534,7 +4595,7 @@ esac
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
@@ -4548,7 +4609,7 @@ $as_echo "$ac_cv_path_GREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4600,7 +4661,7 @@ esac
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -4615,7 +4676,7 @@ $as_echo "$ac_cv_path_EGREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
 $as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
+if ${ac_cv_path_FGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -4667,7 +4728,7 @@ esac
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_FGREP"; then
-    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_FGREP=$FGREP
@@ -4746,7 +4807,7 @@ else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 $as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
@@ -4783,10 +4844,10 @@ else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -4813,7 +4874,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
+if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
@@ -4876,7 +4937,7 @@ else
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DUMPBIN"; then
@@ -4920,7 +4981,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DUMPBIN"; then
@@ -4992,7 +5053,7 @@ test -z "$NM" && NM=nm
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
 $as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
+if ${lt_cv_nm_interface+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_nm_interface="BSD nm"
@@ -5027,7 +5088,7 @@ fi
 # find the maximum length of command line arguments
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
 $as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+if ${lt_cv_sys_max_cmd_len+:} false; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
@@ -5172,8 +5233,8 @@ $as_echo_n "checking whether the shell u
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -5222,9 +5283,83 @@ esac
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
 $as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
+if ${lt_cv_ld_reload_flag+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_reload_flag='-r'
@@ -5238,6 +5373,11 @@ case $reload_flag in
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -5260,7 +5400,7 @@ if test -n "$ac_tool_prefix"; then
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OBJDUMP"; then
@@ -5300,7 +5440,7 @@ if test -z "$ac_cv_prog_OBJDUMP"; then
 set dummy objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OBJDUMP"; then
@@ -5359,7 +5499,7 @@ test -z "$OBJDUMP" && OBJDUMP=objdump
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
 $as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
+if ${lt_cv_deplibs_check_method+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -5406,7 +5546,8 @@ mingw* | pw32*)
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
@@ -5560,6 +5701,21 @@ esac
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
 $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5575,12 +5731,166 @@ test -z "$deplibs_check_method" && depli
 
 
 
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -5593,7 +5903,7 @@ do
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5613,14 +5923,18 @@ $as_echo "no" >&6; }
 fi
 
 
+    test -n "$AR" && break
+  done
 fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
   ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -5633,7 +5947,7 @@ do
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
+    ac_cv_prog_ac_ct_AR="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5652,6 +5966,10 @@ else
 $as_echo "no" >&6; }
 fi
 
+
+  test -n "$ac_ct_AR" && break
+done
+
   if test "x$ac_ct_AR" = x; then
     AR="false"
   else
@@ -5663,16 +5981,72 @@ ac_tool_warned=yes ;;
 esac
     AR=$ac_ct_AR
   fi
-else
-  AR="$ac_cv_prog_AR"
 fi
 
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
 
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
 
 
 
@@ -5685,7 +6059,7 @@ if test -n "$ac_tool_prefix"; then
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -5725,7 +6099,7 @@ if test -z "$ac_cv_prog_STRIP"; then
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -5784,7 +6158,7 @@ if test -n "$ac_tool_prefix"; then
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
@@ -5824,7 +6198,7 @@ if test -z "$ac_cv_prog_RANLIB"; then
 set dummy ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
@@ -5953,7 +6327,7 @@ compiler=$CC
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -6014,8 +6388,8 @@ esac
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -6051,6 +6425,7 @@ for ac_symprfx in "" "_"; do
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -6092,6 +6467,18 @@ _LT_EOF
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -6103,7 +6490,7 @@ _LT_EOF
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-const struct {
+LT_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
@@ -6129,8 +6516,8 @@ static const void *lt_preloaded_setup()
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
@@ -6140,8 +6527,8 @@ _LT_EOF
   test $ac_status = 0; } && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&5
 	fi
@@ -6178,6 +6565,23 @@ else
 $as_echo "ok" >&6; }
 fi
 
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
 
 
 
@@ -6194,7 +6598,38 @@ fi
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
 
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
 
 
 
@@ -6325,7 +6760,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
+if ${lt_cv_cc_needs_belf+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_ext=c
@@ -6387,11 +6822,128 @@ sparc*-*solaris*)
       ;;
     esac
   fi
-  rm -rf conftest*
-  ;;
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
 esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
 
-need_locks="$enable_libtool_lock"
 
 
   case $host_os in
@@ -6401,7 +6953,7 @@ need_locks="$enable_libtool_lock"
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DSYMUTIL"; then
@@ -6441,7 +6993,7 @@ if test -z "$ac_cv_prog_DSYMUTIL"; then
 set dummy dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DSYMUTIL"; then
@@ -6493,7 +7045,7 @@ fi
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NMEDIT"; then
@@ -6533,7 +7085,7 @@ if test -z "$ac_cv_prog_NMEDIT"; then
 set dummy nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_NMEDIT"; then
@@ -6585,7 +7137,7 @@ fi
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
+if ${ac_cv_prog_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$LIPO"; then
@@ -6625,7 +7177,7 @@ if test -z "$ac_cv_prog_LIPO"; then
 set dummy lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_LIPO"; then
@@ -6677,7 +7229,7 @@ fi
 set dummy ${ac_tool_prefix}otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
+if ${ac_cv_prog_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL"; then
@@ -6717,7 +7269,7 @@ if test -z "$ac_cv_prog_OTOOL"; then
 set dummy otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL"; then
@@ -6769,7 +7321,7 @@ fi
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL64"; then
@@ -6809,7 +7361,7 @@ if test -z "$ac_cv_prog_OTOOL64"; then
 set dummy otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL64"; then
@@ -6884,7 +7436,7 @@ fi
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
 $as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+if ${lt_cv_apple_cc_single_mod+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
@@ -6913,7 +7465,7 @@ fi
 $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_exported_symbols_list=no
@@ -6945,7 +7497,7 @@ fi
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
 $as_echo_n "checking for -force_load linker flag... " >&6; }
-if test "${lt_cv_ld_force_load+set}" = set; then :
+if ${lt_cv_ld_force_load+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_force_load=no
@@ -6956,6 +7508,8 @@ _LT_EOF
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
       echo "$AR cru libconftest.a conftest.o" >&5
       $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
       cat > conftest.c << _LT_EOF
 int main() { return 0;}
 _LT_EOF
@@ -7020,7 +7574,7 @@ if test -n "$CPP" && test -d "$CPP"; the
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then :
+  if ${ac_cv_prog_CPP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -7050,7 +7604,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7066,11 +7620,11 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -7109,7 +7663,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7125,18 +7679,18 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -7148,7 +7702,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -7265,8 +7819,7 @@ do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
 "
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -7280,7 +7833,7 @@ for ac_header in dlfcn.h
 do :
   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
 "
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_DLFCN_H 1
 _ACEOF
@@ -7467,7 +8020,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
 $as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
+if ${lt_cv_objdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   rm -f .libs 2>/dev/null
@@ -7545,7 +8098,7 @@ file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -7611,7 +8164,7 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
 $as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -7753,7 +8306,7 @@ if test "$GCC" = yes; then
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
@@ -7806,8 +8359,6 @@ fi
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -7972,6 +8523,12 @@ $as_echo_n "checking for $compiler optio
 	lt_prog_compiler_pic='--shared'
 	lt_prog_compiler_static='--static'
 	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -8034,7 +8591,7 @@ $as_echo_n "checking for $compiler optio
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95*)
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	lt_prog_compiler_wl='-Qoption ld ';;
       *)
 	lt_prog_compiler_wl='-Wl,';;
@@ -8091,13 +8648,17 @@ case $host_os in
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
-
-
-
-
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
 
 #
 # Check to make sure the PIC flag actually works.
@@ -8105,7 +8666,7 @@ $as_echo "$lt_prog_compiler_pic" >&6; }
 if test -n "$lt_prog_compiler_pic"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works=no
@@ -8158,13 +8719,18 @@ fi
 
 
 
+
+
+
+
+
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
@@ -8207,7 +8773,7 @@ fi
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8262,7 +8828,7 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6;
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8508,7 +9074,8 @@ _LT_EOF
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -8556,7 +9123,7 @@ _LT_EOF
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
-	tmp_addflag=
+	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
@@ -8607,12 +9174,12 @@ _LT_EOF
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
 	  hardcode_libdir_flag_spec=
 	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -8626,8 +9193,8 @@ _LT_EOF
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -8645,8 +9212,8 @@ _LT_EOF
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8692,8 +9259,8 @@ _LT_EOF
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8823,7 +9390,13 @@ _LT_EOF
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -8836,22 +9409,29 @@ main ()
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
         archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
@@ -8863,7 +9443,13 @@ if test -z "$aix_libpath"; then aix_libp
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -8876,22 +9462,29 @@ main ()
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
 	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
@@ -8936,20 +9529,63 @@ if test -z "$aix_libpath"; then aix_libp
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_from_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -8989,6 +9625,10 @@ if test -z "$aix_libpath"; then aix_libp
       hardcode_shlibpath_var=no
       ;;
 
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -9001,7 +9641,7 @@ if test -z "$aix_libpath"; then aix_libp
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2.*)
+    freebsd2*)
       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
       hardcode_minus_L=yes
@@ -9010,7 +9650,7 @@ if test -z "$aix_libpath"; then aix_libp
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
       hardcode_shlibpath_var=no
@@ -9018,7 +9658,7 @@ if test -z "$aix_libpath"; then aix_libp
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -9034,7 +9674,7 @@ if test -z "$aix_libpath"; then aix_libp
 
     hpux10*)
       if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -9058,10 +9698,10 @@ if test -z "$aix_libpath"; then aix_libp
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
@@ -9078,7 +9718,7 @@ if test -z "$aix_libpath"; then aix_libp
 	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
 	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
 $as_echo_n "checking if $CC understands -b... " >&6; }
-if test "${lt_cv_prog_compiler__b+set}" = set; then :
+if ${lt_cv_prog_compiler__b+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler__b=no
@@ -9140,23 +9780,36 @@ fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-int foo(void) {}
+int foo (void) { return 0; }
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
       else
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
@@ -9241,7 +9894,7 @@ rm -f core conftest.err conftest.$ac_obj
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
@@ -9260,9 +9913,9 @@ rm -f core conftest.err conftest.$ac_obj
       no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
@@ -9450,7 +10103,7 @@ x|xyes)
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if test "${lt_cv_archive_cmds_need_lc+set}" = set; then :
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   $RM conftest*
@@ -9838,8 +10491,9 @@ cygwin* | mingw* | pw32* | cegcc*)
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -9872,13 +10526,71 @@ cygwin* | mingw* | pw32* | cegcc*)
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -9907,6 +10619,10 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -9914,7 +10630,7 @@ freebsd* | dragonfly*)
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[23].*) objformat=aout ;;
+    freebsd[123]*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -9932,7 +10648,7 @@ freebsd* | dragonfly*)
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2.*)
+  freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[01]* | freebsdelf3.[01]*)
@@ -9970,7 +10686,7 @@ haiku*)
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -10088,7 +10804,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   shlibpath_overrides_runpath=no
 
   # Some binutils ld are patched to set DT_RUNPATH
-  if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then :
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_shlibpath_overrides_runpath=no
@@ -10508,7 +11224,7 @@ else
   # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10542,7 +11258,7 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -10556,12 +11272,12 @@ fi
 
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
+if test "x$ac_cv_func_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+if ${ac_cv_lib_dld_shl_load+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10595,16 +11311,16 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
+if test "x$ac_cv_func_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10638,12 +11354,12 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+if ${ac_cv_lib_svld_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10677,12 +11393,12 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+if ${ac_cv_lib_dld_dld_link+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10716,7 +11432,7 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
@@ -10757,7 +11473,7 @@ fi
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
 $as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
+if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -10766,7 +11482,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10769 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10810,10 +11526,10 @@ else
 /* When -fvisbility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
 #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
+int fnord () __attribute__((visibility("default")));
 #endif
 
-void fnord () { int i=42; }
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -10863,7 +11579,7 @@ $as_echo "$lt_cv_dlopen_self" >&6; }
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
+if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -10872,7 +11588,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10875 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10916,10 +11632,10 @@ else
 /* When -fvisbility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
 #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
+int fnord () __attribute__((visibility("default")));
 #endif
 
-void fnord () { int i=42; }
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11111,6 +11827,7 @@ CC="$lt_save_CC"
 
 
 
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
@@ -11137,7 +11854,7 @@ fi
 for ac_header in sys/mman.h
 do :
   ac_fn_c_check_header_mongrel "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_mman_h" = x""yes; then :
+if test "x$ac_cv_header_sys_mman_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_SYS_MMAN_H 1
 _ACEOF
@@ -11149,7 +11866,7 @@ done
 for ac_func in mmap
 do :
   ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
-if test "x$ac_cv_func_mmap" = x""yes; then :
+if test "x$ac_cv_func_mmap" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_MMAP 1
 _ACEOF
@@ -11159,7 +11876,7 @@ done
 
 
 ac_fn_c_check_header_mongrel "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_mman_h" = x""yes; then :
+if test "x$ac_cv_header_sys_mman_h" = xyes; then :
   libffi_header_sys_mman_h=yes
 else
   libffi_header_sys_mman_h=no
@@ -11167,7 +11884,7 @@ fi
 
 
 ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
-if test "x$ac_cv_func_mmap" = x""yes; then :
+if test "x$ac_cv_func_mmap" = xyes; then :
   libffi_func_mmap=yes
 else
   libffi_func_mmap=no
@@ -11181,7 +11898,7 @@ if test "$libffi_header_sys_mman_h" != y
 else
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether read-only mmap of a plain file works" >&5
 $as_echo_n "checking whether read-only mmap of a plain file works... " >&6; }
-if test "${ac_cv_func_mmap_file+set}" = set; then :
+if ${ac_cv_func_mmap_file+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if
@@ -11200,7 +11917,7 @@ fi
 $as_echo "$ac_cv_func_mmap_file" >&6; }
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap from /dev/zero works" >&5
 $as_echo_n "checking whether mmap from /dev/zero works... " >&6; }
-if test "${ac_cv_func_mmap_dev_zero+set}" = set; then :
+if ${ac_cv_func_mmap_dev_zero+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if it has mmap() but /dev/zero
@@ -11226,7 +11943,7 @@ $as_echo "$ac_cv_func_mmap_dev_zero" >&6
    # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MAP_ANON(YMOUS)" >&5
 $as_echo_n "checking for MAP_ANON(YMOUS)... " >&6; }
-if test "${ac_cv_decl_map_anon+set}" = set; then :
+if ${ac_cv_decl_map_anon+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11262,7 +11979,7 @@ $as_echo "$ac_cv_decl_map_anon" >&6; }
    else
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap with MAP_ANON(YMOUS) works" >&5
 $as_echo_n "checking whether mmap with MAP_ANON(YMOUS) works... " >&6; }
-if test "${ac_cv_func_mmap_anon+set}" = set; then :
+if ${ac_cv_func_mmap_anon+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if it has mmap() and MAP_ANON or
@@ -11322,6 +12039,10 @@ case "$host" in
 
   amd64-*-freebsd* | amd64-*-openbsd*)
 	TARGET=X86_64; TARGETDIR=x86
+  	;;
+
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
 	;;
 
   avr32*-*-*)
@@ -11459,7 +12180,7 @@ esac
 
 
 if test $TARGETDIR = unknown; then
-  as_fn_error "\"libffi has not been ported to $host.\"" "$LINENO" 5
+  as_fn_error $? "\"libffi has not been ported to $host.\"" "$LINENO" 5
 fi
 
  if test x$TARGET = xMIPS; then
@@ -11550,6 +12271,14 @@ else
   M68K_FALSE=
 fi
 
+ if test x$TARGET = xMOXIE; then
+  MOXIE_TRUE=
+  MOXIE_FALSE='#'
+else
+  MOXIE_TRUE='#'
+  MOXIE_FALSE=
+fi
+
  if test x$TARGET = xPOWERPC; then
   POWERPC_TRUE=
   POWERPC_FALSE='#'
@@ -11673,7 +12402,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11786,7 +12515,7 @@ fi
 for ac_func in memcpy
 do :
   ac_fn_c_check_func "$LINENO" "memcpy" "ac_cv_func_memcpy"
-if test "x$ac_cv_func_memcpy" = x""yes; then :
+if test "x$ac_cv_func_memcpy" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_MEMCPY 1
 _ACEOF
@@ -11794,11 +12523,22 @@ _ACEOF
 fi
 done
 
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
 $as_echo_n "checking for working alloca.h... " >&6; }
-if test "${ac_cv_working_alloca_h+set}" = set; then :
+if ${ac_cv_working_alloca_h+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11831,7 +12571,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
 $as_echo_n "checking for alloca... " >&6; }
-if test "${ac_cv_func_alloca_works+set}" = set; then :
+if ${ac_cv_func_alloca_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11850,7 +12590,7 @@ else
  #pragma alloca
 #   else
 #    ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
+void *alloca (size_t);
 #    endif
 #   endif
 #  endif
@@ -11894,7 +12634,7 @@ $as_echo "#define C_ALLOCA 1" >>confdefs
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
 $as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then :
+if ${ac_cv_os_cray+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11921,8 +12661,7 @@ if test $ac_cv_os_cray = yes; then
   for ac_func in _getb67 GETB67 getb67; do
     as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
 
 cat >>confdefs.h <<_ACEOF
 #define CRAY_STACKSEG_END $ac_func
@@ -11936,7 +12675,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
 $as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then :
+if ${ac_cv_c_stack_direction+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "$cross_compiling" = yes; then :
@@ -11991,7 +12730,7 @@ fi
 # This bug is HP SR number 8606223364.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5
 $as_echo_n "checking size of double... " >&6; }
-if test "${ac_cv_sizeof_double+set}" = set; then :
+if ${ac_cv_sizeof_double+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double"        "$ac_includes_default"; then :
@@ -12000,9 +12739,8 @@ else
   if test "$ac_cv_type_double" = yes; then
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (double)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (double)
+See \`config.log' for more details" "$LINENO" 5; }
    else
      ac_cv_sizeof_double=0
    fi
@@ -12025,7 +12763,7 @@ _ACEOF
 # This bug is HP SR number 8606223364.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long double" >&5
 $as_echo_n "checking size of long double... " >&6; }
-if test "${ac_cv_sizeof_long_double+set}" = set; then :
+if ${ac_cv_sizeof_long_double+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long double))" "ac_cv_sizeof_long_double"        "$ac_includes_default"; then :
@@ -12034,9 +12772,8 @@ else
   if test "$ac_cv_type_long_double" = yes; then
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (long double)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (long double)
+See \`config.log' for more details" "$LINENO" 5; }
    else
      ac_cv_sizeof_long_double=0
    fi
@@ -12070,7 +12807,7 @@ fi
 
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then :
+if ${ac_cv_c_bigendian+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_bigendian=unknown
@@ -12288,14 +13025,14 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUI
 
      ;; #(
    *)
-     as_fn_error "unknown endianness
+     as_fn_error $? "unknown endianness
  presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .cfi pseudo-op support" >&5
 $as_echo_n "checking assembler .cfi pseudo-op support... " >&6; }
-if test "${gcc_cv_as_cfi_pseudo_op+set}" = set; then :
+if ${gcc_cv_as_cfi_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12331,7 +13068,7 @@ $as_echo "#define HAVE_AS_CFI_PSEUDO_OP
 if test x$TARGET = xSPARC; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler and linker support unaligned pc related relocs" >&5
 $as_echo_n "checking assembler and linker support unaligned pc related relocs... " >&6; }
-if test "${libffi_cv_as_sparc_ua_pcrel+set}" = set; then :
+if ${libffi_cv_as_sparc_ua_pcrel+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12370,7 +13107,7 @@ $as_echo "#define HAVE_AS_SPARC_UA_PCREL
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .register pseudo-op support" >&5
 $as_echo_n "checking assembler .register pseudo-op support... " >&6; }
-if test "${libffi_cv_as_register_pseudo_op+set}" = set; then :
+if ${libffi_cv_as_register_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12407,7 +13144,7 @@ fi
 if test x$TARGET = xX86 || test x$TARGET = xX86_WIN32 || test x$TARGET = xX86_64; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler supports pc related relocs" >&5
 $as_echo_n "checking assembler supports pc related relocs... " >&6; }
-if test "${libffi_cv_as_x86_pcrel+set}" = set; then :
+if ${libffi_cv_as_x86_pcrel+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12428,7 +13165,7 @@ $as_echo "#define HAVE_AS_X86_PCREL 1" >
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .ascii pseudo-op support" >&5
 $as_echo_n "checking assembler .ascii pseudo-op support... " >&6; }
-if test "${libffi_cv_as_ascii_pseudo_op+set}" = set; then :
+if ${libffi_cv_as_ascii_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12463,7 +13200,7 @@ $as_echo "#define HAVE_AS_ASCII_PSEUDO_O
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .string pseudo-op support" >&5
 $as_echo_n "checking assembler .string pseudo-op support... " >&6; }
-if test "${libffi_cv_as_string_pseudo_op+set}" = set; then :
+if ${libffi_cv_as_string_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12508,7 +13245,7 @@ esac
 if test x$TARGET = xX86_64; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler supports unwind section type" >&5
 $as_echo_n "checking assembler supports unwind section type... " >&6; }
-if test "${libffi_cv_as_x86_64_unwind_section_type+set}" = set; then :
+if ${libffi_cv_as_x86_64_unwind_section_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12530,7 +13267,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether .eh_frame section should be read-only" >&5
 $as_echo_n "checking whether .eh_frame section should be read-only... " >&6; }
-if test "${libffi_cv_ro_eh_frame+set}" = set; then :
+if ${libffi_cv_ro_eh_frame+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12564,7 +13301,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __attribute__((visibility(\"hidden\")))" >&5
 $as_echo_n "checking for __attribute__((visibility(\"hidden\")))... " >&6; }
-if test "${libffi_cv_hidden_visibility_attribute+set}" = set; then :
+if ${libffi_cv_hidden_visibility_attribute+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12638,21 +13375,25 @@ $as_echo "#define USING_PURIFY 1" >>conf
 fi
 
 
-if test -n "$with_cross_host" &&
-   test x"$with_cross_host" != x"no"; then
-  toolexecdir='$(exec_prefix)/$(target_alias)'
-  toolexeclibdir='$(toolexecdir)/lib'
-else
-  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
-  toolexeclibdir='$(libdir)'
-fi
-multi_os_directory=`$CC -print-multi-os-directory`
-case $multi_os_directory in
-  .) ;; # Avoid trailing /.
-  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-esac
+# These variables are only ever used when we cross-build to X86_WIN32.
+# And we only support this with GCC, so...
+if test x"$GCC" != x"no"; then
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    toolexecdir='$(exec_prefix)/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/lib'
+  else
+    toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    toolexeclibdir='$(libdir)'
+  fi
+  multi_os_directory=`$CC -print-multi-os-directory`
+  case $multi_os_directory in
+    .) ;; # Avoid trailing /.
+    *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+  esac
 
 
+fi
 
 if test "${multilib}" = "yes"; then
   multilib_arg="--enable-multilib"
@@ -12668,7 +13409,7 @@ ac_config_commands="$ac_config_commands
 ac_config_links="$ac_config_links include/ffitarget.h:src/$TARGETDIR/ffitarget.h"
 
 
-ac_config_files="$ac_config_files include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile"
+ac_config_files="$ac_config_files include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc"
 
 
 cat >confcache <<\_ACEOF
@@ -12735,10 +13476,21 @@ $as_echo "$as_me: WARNING: cache variabl
      :end' >>confcache
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
+    if test "x$cache_file" != "x/dev/null"; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -12754,6 +13506,7 @@ DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
+U=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -12777,132 +13530,136 @@ else
 fi
 
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error "conditional \"AMDEP\" was never defined.
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCCAS\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+  as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${TESTSUBDIR_TRUE}" && test -z "${TESTSUBDIR_FALSE}"; then
-  as_fn_error "conditional \"TESTSUBDIR\" was never defined.
+  as_fn_error $? "conditional \"TESTSUBDIR\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MIPS_TRUE}" && test -z "${MIPS_FALSE}"; then
-  as_fn_error "conditional \"MIPS\" was never defined.
+  as_fn_error $? "conditional \"MIPS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SPARC_TRUE}" && test -z "${SPARC_FALSE}"; then
-  as_fn_error "conditional \"SPARC\" was never defined.
+  as_fn_error $? "conditional \"SPARC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_TRUE}" && test -z "${X86_FALSE}"; then
-  as_fn_error "conditional \"X86\" was never defined.
+  as_fn_error $? "conditional \"X86\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_FREEBSD_TRUE}" && test -z "${X86_FREEBSD_FALSE}"; then
-  as_fn_error "conditional \"X86_FREEBSD\" was never defined.
+  as_fn_error $? "conditional \"X86_FREEBSD\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_WIN32_TRUE}" && test -z "${X86_WIN32_FALSE}"; then
-  as_fn_error "conditional \"X86_WIN32\" was never defined.
+  as_fn_error $? "conditional \"X86_WIN32\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_WIN64_TRUE}" && test -z "${X86_WIN64_FALSE}"; then
-  as_fn_error "conditional \"X86_WIN64\" was never defined.
+  as_fn_error $? "conditional \"X86_WIN64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_DARWIN_TRUE}" && test -z "${X86_DARWIN_FALSE}"; then
-  as_fn_error "conditional \"X86_DARWIN\" was never defined.
+  as_fn_error $? "conditional \"X86_DARWIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ALPHA_TRUE}" && test -z "${ALPHA_FALSE}"; then
-  as_fn_error "conditional \"ALPHA\" was never defined.
+  as_fn_error $? "conditional \"ALPHA\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${IA64_TRUE}" && test -z "${IA64_FALSE}"; then
-  as_fn_error "conditional \"IA64\" was never defined.
+  as_fn_error $? "conditional \"IA64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${M32R_TRUE}" && test -z "${M32R_FALSE}"; then
-  as_fn_error "conditional \"M32R\" was never defined.
+  as_fn_error $? "conditional \"M32R\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${M68K_TRUE}" && test -z "${M68K_FALSE}"; then
-  as_fn_error "conditional \"M68K\" was never defined.
+  as_fn_error $? "conditional \"M68K\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${MOXIE_TRUE}" && test -z "${MOXIE_FALSE}"; then
+  as_fn_error $? "conditional \"MOXIE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_TRUE}" && test -z "${POWERPC_FALSE}"; then
-  as_fn_error "conditional \"POWERPC\" was never defined.
+  as_fn_error $? "conditional \"POWERPC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_AIX_TRUE}" && test -z "${POWERPC_AIX_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_AIX\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_AIX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_DARWIN\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_DARWIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_FREEBSD_TRUE}" && test -z "${POWERPC_FREEBSD_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_FREEBSD\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_FREEBSD\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ARM_TRUE}" && test -z "${ARM_FALSE}"; then
-  as_fn_error "conditional \"ARM\" was never defined.
+  as_fn_error $? "conditional \"ARM\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AVR32_TRUE}" && test -z "${AVR32_FALSE}"; then
-  as_fn_error "conditional \"AVR32\" was never defined.
+  as_fn_error $? "conditional \"AVR32\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LIBFFI_CRIS_TRUE}" && test -z "${LIBFFI_CRIS_FALSE}"; then
-  as_fn_error "conditional \"LIBFFI_CRIS\" was never defined.
+  as_fn_error $? "conditional \"LIBFFI_CRIS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${FRV_TRUE}" && test -z "${FRV_FALSE}"; then
-  as_fn_error "conditional \"FRV\" was never defined.
+  as_fn_error $? "conditional \"FRV\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${S390_TRUE}" && test -z "${S390_FALSE}"; then
-  as_fn_error "conditional \"S390\" was never defined.
+  as_fn_error $? "conditional \"S390\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_64_TRUE}" && test -z "${X86_64_FALSE}"; then
-  as_fn_error "conditional \"X86_64\" was never defined.
+  as_fn_error $? "conditional \"X86_64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SH_TRUE}" && test -z "${SH_FALSE}"; then
-  as_fn_error "conditional \"SH\" was never defined.
+  as_fn_error $? "conditional \"SH\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SH64_TRUE}" && test -z "${SH64_FALSE}"; then
-  as_fn_error "conditional \"SH64\" was never defined.
+  as_fn_error $? "conditional \"SH64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA_LINUX_TRUE}" && test -z "${PA_LINUX_FALSE}"; then
-  as_fn_error "conditional \"PA_LINUX\" was never defined.
+  as_fn_error $? "conditional \"PA_LINUX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA_HPUX_TRUE}" && test -z "${PA_HPUX_FALSE}"; then
-  as_fn_error "conditional \"PA_HPUX\" was never defined.
+  as_fn_error $? "conditional \"PA_HPUX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA64_HPUX_TRUE}" && test -z "${PA64_HPUX_FALSE}"; then
-  as_fn_error "conditional \"PA64_HPUX\" was never defined.
+  as_fn_error $? "conditional \"PA64_HPUX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
 
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -13003,6 +13760,7 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -13048,19 +13806,19 @@ export LANGUAGE
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -13256,7 +14014,7 @@ $as_echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -13309,8 +14067,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libffi $as_me 3.0.9, which was
-generated by GNU Autoconf 2.64.  Invocation command line was
+This file was extended by libffi $as_me 3.0.11-rc2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -13351,6 +14109,7 @@ Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
   -q, --quiet, --silent
                    do not print progress messages
   -d, --debug      don't remove temporary files
@@ -13372,16 +14131,17 @@ $config_links
 Configuration commands:
 $config_commands
 
-Report bugs to <http://gcc.gnu.org/bugs.html>."
+Report bugs to <http://github.com/atgreen/libffi/issues>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-libffi config.status 3.0.9
-configured by $0, generated by GNU Autoconf 2.64,
-  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+libffi config.status 3.0.11-rc2
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -13399,11 +14159,16 @@ ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -13417,12 +14182,15 @@ do
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
     $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -13435,7 +14203,7 @@ do
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    as_fn_error "ambiguous option: \`$1'
+    as_fn_error $? "ambiguous option: \`$1'
 Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
@@ -13444,7 +14212,7 @@ Try \`$0 --help' for more information.";
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) as_fn_error "unrecognized option: \`$1'
+  -*) as_fn_error $? "unrecognized option: \`$1'
 Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
@@ -13488,20 +14256,6 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ
 #
 # INIT-COMMANDS
 #
-
-srcdir="$srcdir"
-host="$host"
-target="$target"
-with_multisubdir="$with_multisubdir"
-with_multisrctop="$with_multisrctop"
-with_target_subdir="$with_target_subdir"
-ac_configure_args="${multilib_arg} ${ac_configure_args}"
-multi_basedir="$multi_basedir"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-CC="$CC"
-CXX="$CXX"
-GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 
@@ -13540,13 +14294,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_
 lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
 lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
 lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
 reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
 reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
 OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
 deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
 file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
 AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
 AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
 STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
 RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
 old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
@@ -13561,14 +14322,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$l
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
 lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
 need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
 DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
 NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
 LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
@@ -13601,12 +14365,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcod
 hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
 inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
 link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
 always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
 export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
 exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
 include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
 prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
 file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
 variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
 need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
@@ -13661,8 +14425,13 @@ reload_flag \
 OBJDUMP \
 deplibs_check_method \
 file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
 AR \
 AR_FLAGS \
+archiver_list_spec \
 STRIP \
 RANLIB \
 CC \
@@ -13672,12 +14441,14 @@ lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
 lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
 lt_prog_compiler_pic \
+lt_prog_compiler_wl \
 lt_prog_compiler_static \
 lt_cv_prog_compiler_c_o \
 need_locks \
+MANIFEST_TOOL \
 DSYMUTIL \
 NMEDIT \
 LIPO \
@@ -13693,7 +14464,6 @@ no_undefined_flag \
 hardcode_libdir_flag_spec \
 hardcode_libdir_flag_spec_ld \
 hardcode_libdir_separator \
-fix_srcfile_path \
 exclude_expsyms \
 include_expsyms \
 file_list_spec \
@@ -13729,6 +14499,7 @@ module_cmds \
 module_expsym_cmds \
 export_symbols_cmds \
 prelink_cmds \
+postlink_cmds \
 postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
@@ -13774,7 +14545,6 @@ for ac_config_target in $ac_config_targe
 do
   case $ac_config_target in
     "fficonfig.h") CONFIG_HEADERS="$CONFIG_HEADERS fficonfig.h" ;;
-    "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "include") CONFIG_COMMANDS="$CONFIG_COMMANDS include" ;;
@@ -13785,8 +14555,9 @@ do
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
     "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+    "libffi.pc") CONFIG_FILES="$CONFIG_FILES libffi.pc" ;;
 
-  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -13810,9 +14581,10 @@ fi
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  tmp=
+  tmp= ac_tmp=
   trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
@@ -13820,12 +14592,13 @@ $debug ||
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
+  test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -13842,12 +14615,12 @@ if test "x$ac_cr" = x; then
 fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\r'
+  ac_cs_awk_cr='\\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
 _ACEOF
 
 
@@ -13856,18 +14629,18 @@ _ACEOF
   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
   echo "_ACEOF"
 } >conf$$subs.sh ||
-  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   . ./conf$$subs.sh ||
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 
   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
   if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -13875,7 +14648,7 @@ done
 rm -f conf$$subs.sh
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
 sed -n '
 h
@@ -13889,7 +14662,7 @@ s/'"$ac_delim"'$//
 t delim
 :nl
 h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
 t more1
 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
 p
@@ -13903,7 +14676,7 @@ s/.\{148\}//
 t nl
 :delim
 h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
 t more2
 s/["\\]/\\&/g; s/^/"/; s/$/"/
 p
@@ -13923,7 +14696,7 @@ t delim
 rm -f conf$$subs.awk
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
@@ -13955,21 +14728,29 @@ if sed "s/$ac_cr//" < /dev/null > /dev/n
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
 # (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
 s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
 s/^[^=]*=[	 ]*$//
 }'
 fi
@@ -13981,7 +14762,7 @@ fi # test -n "$CONFIG_FILES"
 # No need to generate them if there are no CONFIG_HEADERS.
 # This happens for instance with `./config.status Makefile'.
 if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
 BEGIN {
 _ACEOF
 
@@ -13993,11 +14774,11 @@ _ACEOF
 # handling of long lines.
 ac_delim='%!_!# '
 for ac_last_try in false false :; do
-  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_t"; then
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -14082,7 +14863,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_writ
 _ACAWK
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
 fi # test -n "$CONFIG_HEADERS"
 
 
@@ -14095,7 +14876,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -14114,7 +14895,7 @@ do
     for ac_f
     do
       case $ac_f in
-      -) ac_f="$tmp/stdin";;
+      -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
 	 # because $ac_f cannot contain `:'.
@@ -14123,7 +14904,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -14149,8 +14930,8 @@ $as_echo "$as_me: creating $ac_file" >&6
     esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -14286,23 +15067,24 @@ s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
+which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+which seems to be undefined.  Please make sure it is defined" >&2;}
 
-  rm -f "$tmp/stdin"
+  rm -f "$ac_tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
   esac \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
   :H)
   #
@@ -14311,21 +15093,21 @@ which seems to be undefined.  Please mak
   if test x"$ac_file" != x-; then
     {
       $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-    } >"$tmp/config.h" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
-      mv "$tmp/config.h" "$ac_file" \
-	|| as_fn_error "could not create $ac_file" "$LINENO" 5
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error "could not create -" "$LINENO" 5
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
   fi
 # Compute "$ac_file"'s index in $config_headers.
 _am_arg="$ac_file"
@@ -14379,19 +15161,19 @@ $as_echo X"$_am_arg" |
 $as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
 
     if test ! -r "$ac_source"; then
-      as_fn_error "$ac_source: file not found" "$LINENO" 5
+      as_fn_error $? "$ac_source: file not found" "$LINENO" 5
     fi
     rm -f "$ac_file"
 
     # Try a relative symlink, then a hard link, then a copy.
-    case $srcdir in
+    case $ac_source in
     [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
 	*) ac_rel_source=$ac_top_build_prefix$ac_source ;;
     esac
     ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
       ln "$ac_source" "$ac_file" 2>/dev/null ||
       cp -p "$ac_source" "$ac_file" ||
-      as_fn_error "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
+      as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
   fi
  ;;
   :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
@@ -14401,14 +15183,6 @@ $as_echo "$as_me: executing $ac_file com
 
 
   case $ac_file$ac_mode in
-    "default-1":C)
-# Only add multilib support code if we just rebuilt the top-level
-# Makefile.
-case " $CONFIG_FILES " in
- *" Makefile "*)
-   ac_file=Makefile . ${multi_basedir}/config-ml.in
-   ;;
-esac ;;
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
   # Autoconf 2.62 quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
@@ -14525,7 +15299,8 @@ $as_echo X"$file" |
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+#                 Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -14628,19 +15403,42 @@ SP2NL=$lt_lt_SP2NL
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
 file_magic_cmd=$lt_file_magic_cmd
 
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
 # The archiver.
 AR=$lt_AR
+
+# Flags to create an archive.
 AR_FLAGS=$lt_AR_FLAGS
 
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
 # A symbol stripping program.
 STRIP=$lt_STRIP
 
@@ -14670,6 +15468,12 @@ global_symbol_to_c_name_address=$lt_lt_c
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -14679,6 +15483,9 @@ MAGIC_CMD=$MAGIC_CMD
 # Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
 # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
 DSYMUTIL=$lt_DSYMUTIL
 
@@ -14793,12 +15600,12 @@ with_gcc=$GCC
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic
 
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static
 
@@ -14885,9 +15692,6 @@ inherit_rpath=$inherit_rpath
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols
 
@@ -14903,6 +15707,9 @@ include_expsyms=$lt_include_expsyms
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds
 
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec
 
@@ -14935,210 +15742,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
 
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
 
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
 
-  mv -f "$cfgfile" "$ofile" ||
+   mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 
@@ -15158,7 +15924,7 @@ _ACEOF
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -15179,7 +15945,7 @@ if test "$no_create" != yes; then
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit $?
+  $ac_cs_success || as_fn_exit 1
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
Index: libffi/configure.ac
===================================================================
--- libffi.orig/configure.ac
+++ libffi/configure.ac
@@ -1,12 +1,10 @@
 dnl Process this with autoconf to create configure
 
-AC_PREREQ(2.64)
+AC_PREREQ(2.63)
 
-AC_INIT([libffi], [3.0.9], [http://gcc.gnu.org/bugs.html])
+AC_INIT([libffi], [3.0.11-rc2], [http://github.com/atgreen/libffi/issues])
 AC_CONFIG_HEADERS([fficonfig.h])
 
-AM_ENABLE_MULTILIB(, ..)
-
 AC_CANONICAL_SYSTEM
 target_alias=${target_alias-$host_alias}
 
@@ -22,13 +20,15 @@ AM_INIT_AUTOMAKE
 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
 m4_define([_AC_ARG_VAR_PRECIOUS],[])
 AC_PROG_CC
-m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
+m4_undefine([_AC_ARG_VAR_PRECIOUS])
+m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
 
 AC_SUBST(CFLAGS)
 
 AM_PROG_AS
 AM_PROG_CC_C_O
 AC_PROG_LIBTOOL
+AC_CONFIG_MACRO_DIR([m4])
 
 AM_MAINTAINER_MODE
 
@@ -53,6 +53,10 @@ case "$host" in
 
   amd64-*-freebsd* | amd64-*-openbsd*)
 	TARGET=X86_64; TARGETDIR=x86
+  	;;
+
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
 	;;
 
   avr32*-*-*)
@@ -204,6 +208,7 @@ AM_CONDITIONAL(ALPHA, test x$TARGET = xA
 AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
 AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
 AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
+AM_CONDITIONAL(MOXIE, test x$TARGET = xMOXIE)
 AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
 AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
 AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
@@ -423,21 +428,25 @@ AC_ARG_ENABLE(purify-safety,
     AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
   fi)
 
-if test -n "$with_cross_host" &&
-   test x"$with_cross_host" != x"no"; then
-  toolexecdir='$(exec_prefix)/$(target_alias)'
-  toolexeclibdir='$(toolexecdir)/lib'
-else
-  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
-  toolexeclibdir='$(libdir)'
+# These variables are only ever used when we cross-build to X86_WIN32.
+# And we only support this with GCC, so...
+if test x"$GCC" != x"no"; then
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    toolexecdir='$(exec_prefix)/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/lib'
+  else
+    toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    toolexeclibdir='$(libdir)'
+  fi
+  multi_os_directory=`$CC -print-multi-os-directory`
+  case $multi_os_directory in
+    .) ;; # Avoid trailing /.
+    *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+  esac
+  AC_SUBST(toolexecdir)
+  AC_SUBST(toolexeclibdir)
 fi
-multi_os_directory=`$CC -print-multi-os-directory`
-case $multi_os_directory in
-  .) ;; # Avoid trailing /.
-  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-esac
-AC_SUBST(toolexecdir)
-AC_SUBST(toolexeclibdir)
 
 if test "${multilib}" = "yes"; then
   multilib_arg="--enable-multilib"
@@ -453,6 +462,6 @@ test -d src/$TARGETDIR || mkdir src/$TAR
 
 AC_CONFIG_LINKS(include/ffitarget.h:src/$TARGETDIR/ffitarget.h)
 
-AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile)
+AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc)
 
 AC_OUTPUT
Index: libffi/libffi.pc.in
===================================================================
--- /dev/null
+++ libffi/libffi.pc.in
@@ -0,0 +1,10 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=${libdir}/@PACKAGE_NAME@-@PACKAGE_VERSION@/include
+
+Name: @PACKAGE_NAME@
+Description: Library supporting Foreign Function Interfaces
+Version: @PACKAGE_VERSION@
+Libs: -L${libdir} -lffi
+Cflags: -I${includedir}
Index: libffi/libtool-version
===================================================================
--- libffi.orig/libtool-version
+++ libffi/libtool-version
@@ -2,5 +2,28 @@
 # the libtool manual to understand the meaning of the fields.  This is
 # a separate file so that version updates don't involve re-running
 # automake.
+#
+# Here are a set of rules to help you update your library version
+# information:
+# 
+# 1. Start with version information of `0:0:0' for each libtool library.
+#
+# 2. Update the version information only immediately before a public
+#    release of your software. More frequent updates are unnecessary,
+#    and only guarantee that the current interface number gets larger
+#    faster.
+#
+# 3. If the library source code has changed at all since the last
+#    update, then increment revision (`c:r:a' becomes `c:r+1:a').
+#
+# 4. If any interfaces have been added, removed, or changed since the
+#    last update, increment current, and set revision to 0.
+#
+# 5. If any interfaces have been added since the last public release,
+#    then increment age.
+#
+# 6. If any interfaces have been removed since the last public
+#    release, then set age to 0.
+#
 # CURRENT:REVISION:AGE
-4:1:0
+5:10:0
Index: libffi/mdate-sh
===================================================================
--- /dev/null
+++ libffi/mdate-sh
@@ -0,0 +1,201 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2005-06-29.22
+
+# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005 Free Software
+# Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+  '')
+     echo "$0: No file.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification time of FILE.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume `unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  ls_command='ls -L -l -d'
+else
+  ls_command='ls -l -d'
+fi
+
+# A `ls -l' line looks as follows on OS/2.
+#  drwxrwx---        0 Aug 11  2001 foo
+# This differs from Unix, which adds ownership information.
+#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month.  This cannot work with files whose owner is a
+# user named `Jan', or `Feb', etc.  However, it's unlikely that `/'
+# will be owned by a user whose name is a month.  So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`ls -l -d /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+  shift
+  # Add another shift to the command.
+  command="$command shift;"
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+  Jan) month=January; nummonth=1;;
+  Feb) month=February; nummonth=2;;
+  Mar) month=March; nummonth=3;;
+  Apr) month=April; nummonth=4;;
+  May) month=May; nummonth=5;;
+  Jun) month=June; nummonth=6;;
+  Jul) month=July; nummonth=7;;
+  Aug) month=August; nummonth=8;;
+  Sep) month=September; nummonth=9;;
+  Oct) month=October; nummonth=10;;
+  Nov) month=November; nummonth=11;;
+  Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Index: libffi/texinfo.tex
===================================================================
--- /dev/null
+++ libffi/texinfo.tex
@@ -0,0 +1,7210 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+%
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2005-07-05.19}
+%
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
+% Foundation, Inc.
+%
+% This texinfo.tex file is free software; you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this texinfo.tex file; see the file COPYING.  If not, write
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction.  (This has been our intent since Texinfo was invented.)
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+%   ftp://tug.org/tex/texinfo.tex
+%     (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+\message{Basics,}
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
+\let\ptext=\t
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined     \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% In some macros, we cannot use the `\? notation---the left quote is
+% in some cases the escape char.
+\chardef\backChar  = `\\
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dotChar   = `\.
+\chardef\exclamChar= `\!
+\chardef\plusChar  = `\+
+\chardef\questChar = `\?
+\chardef\semiChar  = `\;
+\chardef\underChar = `\_
+
+\chardef\spaceChar = `\ %
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode\spaceChar=\spacecat}
+
+{% for help with debugging.
+ % example usage: \expandafter\show\activebackslash
+ \catcode`\! = 0 \catcode`\\ = \active
+ !global!def!activebackslash{\}
+}
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\undefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.  Note that \pagecontents
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+  %
+  {%
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingxxx.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 2\baselineskip
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1 \unvbox#1
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\next{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % We cannot use \next here, as it holds the macro to run;
+    % thus we reuse \temp.
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \next.
+% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
+
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick.  --kasal, 16nov03
+
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as enviroments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At runtime, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Evironment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    out of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+%% Simple single-character @ commands
+
+% @@ prints an @
+% Kludge this until the fonts are right (grr).
+\def\@{{\tt\char64}}
+
+% This is turned off because it was never documented
+% and you can use @w{...} around a quote to suppress ligatures.
+%% Define @` and @' to be the same as ` and '
+%% but suppressing ligatures.
+%\def\`{{`}}
+%\def\'{{'}}
+
+% Used to generate quoted braces.
+\def\mylbrace {{\tt\char123}}
+\def\myrbrace {{\tt\char125}}
+\let\{=\mylbrace
+\let\}=\myrbrace
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ptexi
+  \else\ifx\temp\jmacro \j
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
+  \kern-.15em
+  \TeX
+}
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+% 
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+% Old definition--didn't work.
+%\parseargdef\need{\par %
+%% This method tries to make TeX break the page naturally
+%% if the depth of the box does not fit.
+%{\baselineskip=0pt%
+%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
+%\prevdepth=-1000pt
+%}}
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @include file    insert text of that file as input.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable
+    \def\temp{\input #1 }%
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\next\centerH
+  \else
+    \let\next\centerV
+  \fi
+  \next{\hfil \ignorespaces#1\unskip \hfil}%
+}
+\def\centerH#1{%
+  {%
+    \hfil\break
+    \advance\hsize by -\leftskip
+    \advance\hsize by -\rightskip
+    \line{#1}%
+    \break
+  }%
+}
+\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
+
+% @sp n   outputs n lines of vertical space
+
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+
+\let\c=\comment
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent{%
+    \restorefirstparagraphindent
+    \indent
+  }%
+  \gdef\noindent{%
+    \restorefirstparagraphindent
+    \noindent
+  }%
+  \global\everypar = {%
+    \kern -\parindent
+    \restorefirstparagraphindent
+  }%
+}
+
+\gdef\restorefirstparagraphindent{%
+  \global \let \indent = \ptexindent
+  \global \let \noindent = \ptexnoindent
+  \global \everypar = {}%
+}
+
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode\underChar = \active
+  \gdef\mathunderscore{%
+    \catcode\underChar=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a \ character.
+% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
+% this is not advertised and we don't care.  Texinfo does not
+% otherwise define @\.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+  }
+}
+
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{$\ptexbullet$}
+\def\minus{$-$}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+  \leavevmode
+  \hbox to 1.5em{%
+    \hskip 0pt plus 0.25fil
+    .\hfil.\hfil.%
+    \hskip 0pt plus 0.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @comma{} is so commas can be inserted into text without messing up
+% Texinfo's parsing.
+%
+\let\comma = ,
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
+   \iflinks
+     \tryauxfile
+     % Open the new aux file.  TeX will close it automatically at exit.
+     \immediate\openout\auxfile=\jobname.aux
+   \fi % \openindices needs to do some work in any case.
+   \openindices
+   \let\setfilename=\comment % Ignore extra @setfilename cmds.
+   %
+   % If texinfo.cnf is present on the system, read it.
+   % Useful for site-wide @afourpaper, etc.
+   \openin 1 texinfo.cnf
+   \ifeof 1 \else \input texinfo.cnf \fi
+   \closein 1
+   %
+   \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+  \newindex{cp}%
+  \newcodeindex{fn}%
+  \newcodeindex{vr}%
+  \newcodeindex{tp}%
+  \newcodeindex{ky}%
+  \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as \undefined,
+% borrowed from ifpdf.sty.
+\ifx\pdfoutput\undefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets, to
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's we do).
+
+% double active backslashes.
+% 
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslash{@catcode`@\=@active @otherbackslash}
+ @gdef@activebackslashdouble{%
+   @catcode@backChar=@active
+   @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters.  hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens.  I've
+% tinkered with it a little for texinfo, but it's definitely from there.
+% 
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+% 
+\def\HyPsdSubst#1#2#3{%
+  \def\HyPsdReplace##1#1##2\END{%
+    ##1%
+    \ifx\\##2\\%
+    \else
+      #2%
+      \HyReturnAfterFi{%
+        \HyPsdReplace##2\END
+      }%
+    \fi
+  }%
+  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+  \xdef#1{#1}% redefine it as its expansion; the definition is simply
+             % \lastnode when called from \setref -> \pdfmkdest.
+  \HyPsdSubst{(}{\backslashlparen}{#1}%
+  \HyPsdSubst{)}{\backslashrparen}{#1}%
+}
+
+{\catcode\exclamChar = 0 \catcode\backChar = \other
+ !gdef!backslashlparen{\(}%
+ !gdef!backslashrparen{\)}%
+}
+
+\ifpdf
+  \input pdfcolor
+  \pdfcatalog{/PageMode /UseOutlines}%
+  \def\dopdfimage#1#2#3{%
+    \def\imagewidth{#2}%
+    \def\imageheight{#3}%
+    % without \immediate, pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifx\empty\imagewidth\else width \imagewidth \fi
+      \ifx\empty\imageheight\else height \imageheight \fi
+      \ifnum\pdftexversion<13
+         #1.pdf%
+       \else
+         {#1.pdf}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \atdummies
+    \activebackslashdouble
+    \def\pdfdestname{#1}%
+    \backslashparens\pdfdestname
+    \pdfdest name{\pdfdestname} xyz%
+  }}%
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}%
+  %
+  \let\linkcolor = \Blue  % was Cyan, but that seems light?
+  \def\endlink{\Black\pdfendlink}
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \def\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      % Doubled backslashes in the name.
+      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+       \backslashparens\pdfoutlinedest}%
+    \fi
+    %
+    % Also double the backslashes in the display string.
+    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+     \backslashparens\pdfoutlinetext}%
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Thanh's hack / proper braces in bookmarks
+      \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+      \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+      %
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % xx to do this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Right
+      % now, I guess we'll just let the pdf reader have its way.
+      \indexnofonts
+      \setupdatafile
+      \activebackslash
+      \input \jobname.toc
+    \endgroup
+  }
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \ifx\p\space\else\addtokens{\filename}{\PP}%
+        \advance\filenamelength by 1
+      \fi
+    \fi
+    \nextsp}
+  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  \def\pdfurl#1{%
+    \begingroup
+      \normalturnoffactive\def\@{@}%
+      \makevalueexpandable
+      \leavevmode\Red
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \linkcolor #1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\linkcolor = \relax
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+% Default leading.
+\newdimen\textleading  \textleading = 13.2pt
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+\def\setleading#1{%
+  \normalbaselineskip = #1\relax
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\undefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}
+\setfont\deftt\ttshape{10}{\magstep1}
+\setfont\defttsl\ttslshape{10}{\magstep1}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{17}{1000}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}
+\setfont\reducedtt\ttshape{10}{1000}
+\setfont\reducedbf\bfshape{10}{1000}
+\setfont\reducedit\itshape{10}{1000}
+\setfont\reducedsl\slshape{10}{1000}
+\setfont\reducedsf\sfshape{10}{1000}
+\setfont\reducedsc\scshape{10}{1000}
+\setfont\reducedttsl\ttslshape{10}{1000}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+  \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+  \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+  \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+  \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+  \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
+  \def\lsize{reduced}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+  \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
+  \def\lsize{chap}\def\lllsize{subsec}%
+  \resetmathfonts \setleading{25pt}}
+\def\titlefont#1{{\titlefonts\rm #1}}
+\def\chapfonts{%
+  \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+  \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
+  \def\lsize{sec}\def\lllsize{text}%
+  \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+  \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+  \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
+  \def\lsize{subsec}\def\lllsize{reduced}%
+  \resetmathfonts \setleading{16pt}}
+\def\subsecfonts{%
+  \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+  \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
+  \def\lsize{text}\def\lllsize{small}%
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+  \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+  \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+  \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+  \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+  \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{9.5pt}}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+%
+% I wish the USA used A4 paper.
+% --karl, 24jan03.
+
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\textfonts \rm
+
+% Define these so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bfshape{10}{\magstep1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}
+\setfont\shortconttt\ttshape{12}{1000}
+
+%% Add scribe-like font environments, plus @l for inline lisp (usually sans
+%% serif) and @ii for TeX italic
+
+% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
+% unless the following character is such as not to need one.
+\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
+                    \ptexslash\fi\fi\fi}
+\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally uses \ttsl.
+% @var is set to this for defun arguments.
+\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\var=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% @b, explicit bold.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+    \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+\def\samp#1{`\tclose{#1}'\null}
+\setfont\keyrm\rmshape{8}{1000}
+\font\keysy=cmsy9
+\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+    \vbox{\hrule\kern-0.4pt
+     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+    \kern-0.4pt\hrule}%
+  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @file, @option are the same as @samp.
+\let\file=\samp
+\let\option=\samp
+
+% @code is a modification of @t,
+% which makes spaces the same size as normal in the surrounding text.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+%  -- rms.
+{
+  \catcode`\-=\active
+  \catcode`\_=\active
+  %
+  \global\def\code{\begingroup
+    \catcode`\-=\active  \catcode`\_=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\realdash
+     \let_\realunder
+    \fi
+    \codex
+  }
+}
+
+\def\realdash{-}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+\def\codex #1{\tclose{#1}\endgroup}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general.  @allowcodebreaks provides a way to control this.
+% 
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+  \fi\fi
+}
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct.'
+\kbdinputstyle distinct
+
+\def\xkey{\key}
+\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
+\ifx\one\xkey\ifx\threex\three \key{#2}%
+\else{\tclose{\kbdfont\look}}\fi
+\else{\tclose{\kbdfont\look}}\fi}
+
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
+\let\env=\code
+\let\command=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself.  First (mandatory) arg is the url.  Perhaps eventually put in
+% a hypertex \special here.
+%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{\begingroup
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \code{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \let\email=\uref
+\fi
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find.  We need it for
+% Polish suppressed-l.  --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+% 
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+% 
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+% 
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+% 
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+% 
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+% 
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+% 
+% 
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  % 
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  % 
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  % 
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename 
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else 
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+% 
+\ifx\Orb\undefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+        \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+%%% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+		\let\tt=\authortt}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \leftline{\titlefonts\rm #1}
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\authorfont \leftline{#1}}%
+  \fi
+}
+
+
+%%% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\pageheight by -\baselineskip
+  \global\advance\vsize by -\baselineskip
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\HEADINGSoff{%
+\global\evenheadline={\hfil} \global\evenfootline={\hfil}
+\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
+\HEADINGSoff
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\undefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    % 
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  \def\itemcontents{#1}%
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   \vadjust{\penalty 1200}}% not good to break after first line of item.
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry.  Note that \everycr resets \everytab.
+\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we encounter the problem it was intended to solve again.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}%
+      \global\colcount=0 % Reset the column counter.
+      % Check for saved footnotes, etc.
+      \checkinserts
+      % Keeps underfull box messages off when table breaks over pages.
+      %\filbreak
+	% Maybe so, but it also creates really weird page breaks when the
+	% table breaks over pages. Wouldn't \vfil be better?  Wait until the
+	% problem manifests itself, so it can be fixed for real --karl.
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+                                      %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+                                      %% than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1', which must be on a line
+    % by itself.
+    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \obeylines %
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+\def\enddoignore{\endgroup\ignorespaces}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\- = \active \catcode`\_ = \active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\realdash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  % Only do \closeout if we haven't already done it, else we'll end up
+  % closing the target index.
+  \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+    % The \closeout helps reduce unnecessary open files; the limit on the
+    % Acorn RISC OS is a mere 16 files.
+    \expandafter\closeout\csname#2indfile\endcsname
+    \expandafter\let\csname\donesynindex#2\endcsname = 1
+  \fi
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+%  and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+  \def\ {\realbackslash\space }%
+  % Need these in case \tex is in effect and \{ is a \delimiter again.
+  % But can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.
+  \let\{ = \mylbrace
+  \let\} = \myrbrace
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  %
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control% words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
+  %
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\L
+  \definedummyword\OE
+  \definedummyword\O
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\l
+  \definedummyword\oe
+  \definedummyword\o
+  \definedummyword\ss
+  \definedummyword\exclamdown
+  \definedummyword\questiondown
+  \definedummyword\ordf
+  \definedummyword\ordm
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\minus
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\result
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
+  %
+  % Handle some cases of @value -- where it does not contain any
+  % (non-fully-expandable) commands.
+  \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+% Better have this without active chars.
+{
+  \catcode`\~=\other
+  \gdef\commondummiesnofonts{%
+    % Control letters and accents.
+    \definedummyletter\!%
+    \definedummyaccent\"%
+    \definedummyaccent\'%
+    \definedummyletter\*%
+    \definedummyaccent\,%
+    \definedummyletter\.%
+    \definedummyletter\/%
+    \definedummyletter\:%
+    \definedummyaccent\=%
+    \definedummyletter\?%
+    \definedummyaccent\^%
+    \definedummyaccent\`%
+    \definedummyaccent\~%
+    \definedummyword\u
+    \definedummyword\v
+    \definedummyword\H
+    \definedummyword\dotaccent
+    \definedummyword\ringaccent
+    \definedummyword\tieaccent
+    \definedummyword\ubaraccent
+    \definedummyword\udotaccent
+    \definedummyword\dotless
+    %
+    % Texinfo font commands.
+    \definedummyword\b
+    \definedummyword\i
+    \definedummyword\r
+    \definedummyword\sc
+    \definedummyword\t
+    %
+    % Commands that take arguments.
+    \definedummyword\acronym
+    \definedummyword\cite
+    \definedummyword\code
+    \definedummyword\command
+    \definedummyword\dfn
+    \definedummyword\emph
+    \definedummyword\env
+    \definedummyword\file
+    \definedummyword\kbd
+    \definedummyword\key
+    \definedummyword\math
+    \definedummyword\option
+    \definedummyword\samp
+    \definedummyword\strong
+    \definedummyword\tie
+    \definedummyword\uref
+    \definedummyword\url
+    \definedummyword\var
+    \definedummyword\verb
+    \definedummyword\w
+  }
+}
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % Hopefully, all control words can become @asis.
+  \let\definedummyword\definedummyaccent
+  %
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  % how to handle braces?
+  \def\_{\normalunderscore}%
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\o{o}%
+  \def\ss{ss}%
+  \def\exclamdown{!}%
+  \def\questiondown{?}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.
+  % (The following {} will end up in the sort string, but that's ok.)
+  \def\bullet{bullet}%
+  \def\comma{,}%
+  \def\copyright{copyright}%
+  \def\registeredsymbol{R}%
+  \def\dots{...}%
+  \def\enddots{...}%
+  \def\equiv{==}%
+  \def\error{error}%
+  \def\euro{euro}%
+  \def\expansion{==>}%
+  \def\minus{-}%
+  \def\pounds{pounds}%
+  \def\point{.}%
+  \def\print{-|}%
+  \def\result{=>}%
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  % 
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  % 
+  \macrolist
+}
+
+\let\indexbackslash=0  %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \ifvmode
+      \dosubindsanitize
+    \else
+      \dosubindwrite
+    \fi
+  }%
+  \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+      % so it will be output as is; and it will print as backslash.
+  %
+  % Process the index entry with all font commands turned off, to
+  % get the string to sort by.
+  {\indexnofonts
+   \edef\temp{\the\toks0}% need full expansion
+   \xdef\indexsorttmp{\temp}%
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+
+% Take care of unwanted page breaks:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write will make \lastskip zero.  The result is that sequences
+% like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+% ..., ready, GO:
+%
+\def\dosubindsanitize{%
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \skip0 = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \count255 = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\skip0 glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\skip0
+  \fi
+  %
+  \dosubindwrite
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    % 
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\count255>9999 \penalty\count255 \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\skip0
+  \fi
+}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 11
+  \openin 1 \jobname.#1s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+  \else
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \temp
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\backslashcurfont}%
+      \catcode`\\ = 0
+      \escapechar = `\\
+      \begindoublecolumns
+      \input \jobname.#1s
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+\def\initial#1{{%
+  % Some minor font changes for the special characters.
+  \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+  %
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus .5\baselineskip
+  \leftline{\secbf #1}%
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+}}
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+%	\def\entry#1#2{...
+% But this frozes the catcodes in the argument, and can cause problems to
+% @code, which sets - active.  This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+%
+% The right solution is to prevent \entry from swallowing the whole text.
+%                                 --kasal, 21nov03
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % Do not fill out the last line with white space.
+    \parfillskip = 0in
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % Do not prefer a separate line ending with a hyphen to fewer lines.
+    \finalhyphendemerits = 0
+    %
+    % \hangindent is only relevant when the entry text and page number
+    % don't both fit on one line.  In that case, bob suggests starting the
+    % dots pretty far over on the line.  Unfortunately, a large
+    % indentation looks wrong when the entry text itself is broken across
+    % lines.  So we use a small indentation and put up with long leaders.
+    %
+    % \hangafter is reset to 1 (which is the value we want) at the start
+    % of each paragraph, so we need not do anything with that.
+    \hangindent = 2em
+    %
+    % When the entry text needs to be broken, just fill out the first line
+    % with blank space.
+    \rightskip = 0pt plus1fil
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus1pt
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\doentry{%
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+    % #1 is the page number.
+    %
+    % The following is kludged to not output a line of dots in the index if
+    % there are no page numbers.  The next person who breaks this will be
+    % cursed by a Unix daemon.
+    \def\tempa{{\rm }}%
+    \def\tempb{#1}%
+    \edef\tempc{\tempa}%
+    \edef\tempd{\tempb}%
+    \ifx\tempc\tempd
+      \ %
+    \else
+      %
+      % If we must, put the page number on a line of its own, and fill out
+      % this line with blank space.  (The \hfil is overwhelmed with the
+      % fill leaders glue in \indexdotfill if the page number does fit.)
+      \hfil\penalty50
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      % The `\ ' here is removed by the implicit \unskip that TeX does as
+      % part of (the primitive) \par.  Without it, a spurious underfull
+      % \hbox ensues.
+      \ifpdf
+	\pdfgettoks#1.%
+	\ \the\toksA
+      \else
+	\ #1%
+      \fi
+    \fi
+    \par
+  \endgroup
+}
+
+% Like \dotfill except takes at least 1 em.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    #2
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+  }%
+  \eject % run that output routine to set \partialpage
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \vsize = 2\vsize
+}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+  \output = {%
+    % Split the last of the double-column material.  Leave it on the
+    % current page, no automatic page break.
+    \balancecolumns
+    %
+    % If we end up splitting too much material for the current page,
+    % though, there will be another page break right after this \output
+    % invocation ends.  Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.  (We hope \balancecolumns will never be
+    % called on to balance too much material, but if it is, this makes
+    % the output somewhat more palatable.)
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \divide\dimen@ by 2 % target to split to
+  %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+  \splittopskip = \topskip
+  % Loop until we get a decent breakpoint.
+  {%
+    \vbadness = 10000
+    \loop
+      \global\setbox3 = \copy0
+      \global\setbox1 = \vsplit3 to \dimen@
+    \ifdim\ht3>\dimen@
+      \global\advance\dimen@ by 1pt
+    \repeat
+  }%
+  %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+  \setbox0=\vbox to\dimen@{\unvbox1}%
+  \setbox2=\vbox to\dimen@{\unvbox3}%
+  %
+  \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% \unnumberedno is an oxymoron, of course.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines this as the name of the chapter.
+% page headings and footings can use it.  @section does likewise.
+% However, they are not reliable, because we don't use marks.
+\def\thischapter{}
+\def\thissection{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achive this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unmlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unmlevel
+      \chardef\unmlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unmlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unmlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  \message{\putwordChapter\space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  \def\appendixnum{\putwordAppendix\space \appendixletter}%
+  \message{\appendixnum}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  % Well, we could do the following in a group, but that would break
+  % an assumption that \chapmacro is called at the outermost level.
+  % Thus we are safer this way:		--kasal, 24feb04
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+% NOTE on use of \vbox for chapter headings, section headings, and such:
+%       1) We use \vbox rather than the earlier \line to permit
+%          overlong headings to fold.
+%       2) \hyphenpenalty is set to 10000 because hyphenation in a
+%          heading is obnoxious; this forbids it.
+%       3) Likewise, headings look best if no \parindent is used, and
+%          if justification is not attempted.  Hence \raggedright.
+
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                    \parindent=0pt\raggedright
+                    \rm #1\hfill}}%
+  \bigskip \par\penalty 200\relax
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+%%% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+%%% Define plain chapter starts, and page on/off switching for it
+% Parameter controlling skip before chapter headings (if needed)
+
+\newskip\chapheadingskip
+
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+\def\chappager{\par\vfill\supereject}
+\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+  \pchapsepmacro
+  {%
+    \chapfonts \rm
+    %
+    % Have to define \thissection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\thissection{#1}%
+    \gdef\thischaptername{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \def\temptype{#2}%
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+      \gdef\thischapter{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+      \gdef\thischapter{}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+      % We don't substitute the actual chapter name into \thischapter
+      % because we don't want its macros evaluated now.  And we don't
+      % use \thissection because that changes with each section.
+      %
+      \xdef\thischapter{\putwordAppendix{} \appendixletter:
+                        \noexpand\thischaptername}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+      \xdef\thischapter{\putwordChapter{} \the\chapno:
+                        \noexpand\thischaptername}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+          \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                       \parindent=0pt\raggedright
+                       \rm #1\hfill}}\bigskip \par\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                       \parindent=0pt
+                       \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+}
+\def\CHAPFopen{%
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rm
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Only insert the space after the number if we have a section number.
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\thissection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \thissection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\thissection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\thissection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chfplain.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chfplain.
+    \donoderef{#3}%
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)
+  \vskip-\parskip
+  % 
+  % This is purely so the last item on the list is a known \penalty >
+  % 10000.  This is so \startdefun can avoid allowing breakpoints after
+  % section headings.  Otherwise, it would insert a valid breakpoint between:
+  % 
+  %   @section sec-whatever
+  %   @deffn def-whatever
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+% 
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \jobname.toc
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \def\thischapter{}%
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+
+% Normal (long) toc.
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \jobname.toc
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \jobname.toc
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, it should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @tex ... @end tex    escapes into raw Tex temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain tex @ character.
+
+\envdef\tex{%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \escapechar=`\\
+  %
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\*=\ptexstar
+  \let\t=\ptext
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  % Flag to tell @lisp, etc., not to narrow margin.
+  \let\nonarrowing = t%
+  \vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of \def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\def\nonfillstart{%
+  \aboveenvbreak
+  \hfuzz = 12pt % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  \parindent = 0pt
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it by one command:
+\def\makedispenv #1#2{
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two synonyms:
+\def\maketwodispenvs #1#2#3{
+  \makedispenv{#1}{#3}
+  \makedispenv{#2}{#3}
+}
+
+% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvs {lisp}{example}{%
+  \nonfillstart
+  \tt
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble       % eat return
+}
+
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenv {display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenv{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\envdef\quotation{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \advance\rightskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\undefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% [Knuth] pp. 380,381,391
+% Disable Spanish ligatures ?` and !` of \tt font
+\begingroup
+  \catcode`\`=\active\gdef`{\relax\lq}
+\endgroup
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \catcode`\`=\active
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+\def\starttabbox{\setbox0=\hbox\bgroup}
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen0=\wd0 % the width so far, or since the previous tab
+      \divide\dimen0 by\tabw
+      \multiply\dimen0 by\tabw % compute previous multiple of \tabw
+      \advance\dimen0 by\tabw  % advance to next multiple of \tabw
+      \wd0=\dimen0 \box0 \starttabbox
+    }%
+  }
+\endgroup
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  % Easiest (and conventionally used) font for verbatim
+  \tt
+  \def\par{\leavevmode\egroup\box0\endgraf}%
+  \catcode`\`=\active
+  \tabexpand
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \defargscommonending, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    % 
+    \ifnum\lastpenalty=10002 \penalty2000 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty 10002  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remainnig is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+%%% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+%%% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+%%% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+%%% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+%%% Type:
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % How we'll format the type name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  % (plain.tex says that \dimen1 should be used only as global.)
+  \parshape 2 0in \dimen0 \defargsindent \dimen2
+  %
+  % Put the type name to the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% return value type
+    \ifx\temp\empty\else \tclose{\temp} \fi
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  Let's try @var for that.
+  \let\var=\ttslanted
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+\def\badparencount{%
+  \errmessage{Unbalanced parentheses in @def}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \errmessage{Unbalanced square braces in @def}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\undefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\def\scanmacro#1{%
+  \begingroup
+    \newlinechar`\^^M
+    \let\xeatspaces\eatspaces
+    % Undo catcode changes of \startcontents and \doprintindex
+    % When called from @insertcopying or (short)caption, we need active
+    % backslash to get it printed correctly.  Previously, we had
+    % \catcode`\\=\other instead.  We'll see whether a problem appears
+    % with macro expansion.				--kasal, 19aug04
+    \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+    % ... and \example
+    \spaceisspace
+    %
+    % Append \endinput to make sure that TeX does not see the ending newline.
+    %
+    % I've verified that it is necessary both for e-TeX and for ordinary TeX
+    %							--kasal, 29nov03
+    \scantokens{#1\endinput}%
+  \endgroup
+}
+
+\def\scanexp#1{%
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+% 
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \.
+
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by  making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+
+\def\scanctxt{%
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\@=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+}
+
+\def\scanargctxt{%
+  \scanctxt
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{%
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+\def\macroargctxt{%
+  \scanctxt
+  \catcode`\\=\other
+}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}%           now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0%
+  \else
+     \expandafter\parsemargdef \argl;%
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\definedummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\definedummyword \noexpand#1%
+  \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.blah for each blah
+% in the params list, to be ##N where N is the position in that list.
+% That gets used by \mbodybackslash (above).
+
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX:  let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
+        \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1%
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\xeatspaces{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+
+% This defines the macro itself. There are six cases: recursive and
+% nonrecursive macros of zero, one, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifrecursive
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\temp}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+         \egroup\noexpand\scanmacro{\temp}}%
+    \else % many
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\csname\the\macname xx\endcsname}%
+      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+      \expandafter\expandafter
+      \expandafter\xdef
+      \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+          \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+    \fi
+  \else
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+        \egroup
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \else % many
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \expandafter\noexpand\csname\the\macname xx\endcsname}%
+      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+      \expandafter\expandafter
+      \expandafter\xdef
+      \expandafter\expandafter
+      \csname\the\macname xxx\endcsname
+      \paramlist{%
+          \egroup
+          \noexpand\norecurse{\the\macname}%
+          \noexpand\scanmacro{\temp}\egroup}%
+    \fi
+  \fi}
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {.  If so it reads up to the closing }, if not, it reads the whole
+% line.  Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg)
+\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup\else
+    \expandafter\parsearg
+  \fi \next}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Just make them active and then expand them all to nothing.
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \thissection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \atdummies  % preserve commands, but don't expand them
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\thissection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \writexrdef{pg}{\folio}% will be written later, during \shipout
+    }%
+  \fi
+}
+
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  \def\printedmanual{\ignorespaces #5}%
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox1=\hbox{\printedmanual\unskip}%
+  \setbox0=\hbox{\printedrefname\unskip}%
+  \ifdim \wd0 = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+      % Use the node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Use the actual chapter/section title appear inside
+      % the square brackets.  Use the real section title if we have it.
+      \ifdim \wd1 > 0pt
+        % It is in another manual, so we don't have it.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    \leavevmode
+    \getfilename{#4}%
+    {\turnoffactive
+     % See comments at \activebackslashdouble.
+     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+      \backslashparens\pdfxrefdest}%
+     %
+     \ifnum\filenamelength>0
+       \startlink attr{/Border [0 0 0]}%
+         goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       \startlink attr{/Border [0 0 0]}%
+         goto name{\pdfmkpgn{\pdfxrefdest}}%
+     \fi
+    }%
+    \linkcolor
+  \fi
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd0 = 0pt
+      \refx{#1-snt}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % if the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd1 > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    %
+    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+    % insert empty discretionaries after hyphens, which means that it will
+    % not find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens, this
+    % is a loss.  Therefore, we give the text of the node name again, so it
+    % is as if TeX is seeing it for the first time.
+    \ifdim \wd1 > 0pt
+      \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    \else
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via a macro so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+  {%
+    \indexnofonts
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        \message{\linenumber Undefined cross reference `#1'.}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions).  But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR#1\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+  \fi
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % Make the characters 128-255 be printing characters.
+  {%
+    \count1=128
+    \def\loop{%
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
+    }%
+  }%
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\pagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarily, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\undefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing this stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+    \nobreak\bigskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+    \line\bgroup\hss
+  \fi
+  %
+  % Output the image.
+  \ifpdf
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    % \epsfbox itself resets \epsf?size at each figure.
+    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+    \epsfbox{#1.eps}%
+  \fi
+  %
+  \ifimagevmode \hss \egroup \bigbreak \fi  % space after the image
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \thissection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\thissection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+	\appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \atdummies
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \thissection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+\message{localization,}
+% and i18n.
+
+% @documentlanguage is usually given very early, just after
+% @setfilename.  If done too late, it may not override everything
+% properly.  Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\parseargdef\documentlanguage{%
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file if it exists.
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \errhelp = \nolanghelp
+      \errmessage{Cannot read language file txi-#1.tex}%
+    \else
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup
+}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  In the current directory
+should work if nowhere else does.}
+
+
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
+
+
+% Page size parameters.
+%
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be so finicky about underfull hboxes, either.
+\hbadness = 2000
+
+% Following George Bush, just get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \pageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \pagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{46\baselineskip}{6in}%
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{51\baselineskip}{160mm}
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other
+\catcode`\~=\other
+\catcode`\^=\other
+\catcode`\_=\other
+\catcode`\|=\other
+\catcode`\<=\other
+\catcode`\>=\other
+\catcode`\+=\other
+\catcode`\$=\other
+\def\normaldoublequote{"}
+\def\normaltilde{~}
+\def\normalcaret{^}
+\def\normalunderscore{_}
+\def\normalverticalbar{|}
+\def\normalless{<}
+\def\normalgreater{>}
+\def\normalplus{+}
+\def\normaldollar{$}%$ font-lock fix
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active
+\def~{{\tt\char126}}
+\chardef\hat=`\^
+\catcode`\^=\active
+\def^{{\tt \hat}}
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+\chardef \less=`\<
+\catcode`\<=\active
+\def<{{\tt \less}}
+\chardef \gtr=`\>
+\catcode`\>=\active
+\def>{{\tt \gtr}}
+\catcode`\+=\active
+\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+{\catcode`\\=\active
+ @gdef@rawbackslash{@let\=@backslashcurfont}
+ @gdef@otherbackslash{@let\=@realbackslash}
+}
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% \normalbackslash outputs one backslash in fixed width font.
+\def\normalbackslash{{\tt\backslashcurfont}}
+
+\catcode`\\=\active
+
+% Used sometimes to turn off (effectively) the active characters
+% even after parsing them.
+@def@turnoffactive{%
+  @let"=@normaldoublequote
+  @let\=@realbackslash
+  @let~=@normaltilde
+  @let^=@normalcaret
+  @let_=@normalunderscore
+  @let|=@normalverticalbar
+  @let<=@normalless
+  @let>=@normalgreater
+  @let+=@normalplus
+  @let$=@normaldollar %$ font-lock fix
+  @unsepspaces
+}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.  (Thus, \ is not expandable when this is in
+% effect.)
+%
+@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\{ in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active
+  @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other
+@catcode`@# = @other
+@catcode`@% = @other
+
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
Index: libffi/testsuite/lib/target-libpath.exp
===================================================================
--- /dev/null
+++ libffi/testsuite/lib/target-libpath.exp
@@ -0,0 +1,263 @@
+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+
+# This file was contributed by John David Anglin (dave.anglin@nrc-cnrc.gc.ca)
+
+set orig_environment_saved 0
+set orig_ld_library_path_saved 0
+set orig_ld_run_path_saved 0
+set orig_shlib_path_saved 0
+set orig_ld_libraryn32_path_saved 0
+set orig_ld_library64_path_saved 0
+set orig_ld_library_path_32_saved 0
+set orig_ld_library_path_64_saved 0
+set orig_dyld_library_path_saved 0
+
+
+#######################################
+# proc set_ld_library_path_env_vars { }
+#######################################
+
+proc set_ld_library_path_env_vars { } {
+  global ld_library_path
+  global orig_environment_saved
+  global orig_ld_library_path_saved
+  global orig_ld_run_path_saved
+  global orig_shlib_path_saved
+  global orig_ld_libraryn32_path_saved
+  global orig_ld_library64_path_saved
+  global orig_ld_library_path_32_saved
+  global orig_ld_library_path_64_saved
+  global orig_dyld_library_path_saved
+  global orig_ld_library_path
+  global orig_ld_run_path
+  global orig_shlib_path
+  global orig_ld_libraryn32_path
+  global orig_ld_library64_path
+  global orig_ld_library_path_32
+  global orig_ld_library_path_64
+  global orig_dyld_library_path
+  global GCC_EXEC_PREFIX
+
+  # Set the relocated compiler prefix, but only if the user hasn't specified one.
+  if { [info exists GCC_EXEC_PREFIX] && ![info exists env(GCC_EXEC_PREFIX)] } {
+    setenv GCC_EXEC_PREFIX "$GCC_EXEC_PREFIX"
+  }
+
+  # Setting the ld library path causes trouble when testing cross-compilers.
+  if { [is_remote target] } {
+    return
+  }
+
+  if { $orig_environment_saved == 0 } {
+    global env
+
+    set orig_environment_saved 1
+
+    # Save the original environment.
+    if [info exists env(LD_LIBRARY_PATH)] {
+      set orig_ld_library_path "$env(LD_LIBRARY_PATH)"
+      set orig_ld_library_path_saved 1
+    }
+    if [info exists env(LD_RUN_PATH)] {
+      set orig_ld_run_path "$env(LD_RUN_PATH)"
+      set orig_ld_run_path_saved 1
+    }
+    if [info exists env(SHLIB_PATH)] {
+      set orig_shlib_path "$env(SHLIB_PATH)"
+      set orig_shlib_path_saved 1
+    }
+    if [info exists env(LD_LIBRARYN32_PATH)] {
+      set orig_ld_libraryn32_path "$env(LD_LIBRARYN32_PATH)"
+      set orig_ld_libraryn32_path_saved 1
+    }
+    if [info exists env(LD_LIBRARY64_PATH)] {
+      set orig_ld_library64_path "$env(LD_LIBRARY64_PATH)"
+      set orig_ld_library64_path_saved 1
+    }
+    if [info exists env(LD_LIBRARY_PATH_32)] {
+      set orig_ld_library_path_32 "$env(LD_LIBRARY_PATH_32)"
+      set orig_ld_library_path_32_saved 1
+    }
+    if [info exists env(LD_LIBRARY_PATH_64)] {
+      set orig_ld_library_path_64 "$env(LD_LIBRARY_PATH_64)"
+      set orig_ld_library_path_64_saved 1
+    }
+    if [info exists env(DYLD_LIBRARY_PATH)] {
+      set orig_dyld_library_path "$env(DYLD_LIBRARY_PATH)"
+      set orig_dyld_library_path_saved 1
+    }
+  }
+
+  # We need to set ld library path in the environment.  Currently,
+  # unix.exp doesn't set the environment correctly for all systems.
+  # It only sets SHLIB_PATH and LD_LIBRARY_PATH when it executes a
+  # program.  We also need the environment set for compilations, etc.
+  #
+  # On IRIX 6, we have to set variables akin to LD_LIBRARY_PATH, but
+  # called LD_LIBRARYN32_PATH (for the N32 ABI) and LD_LIBRARY64_PATH
+  # (for the 64-bit ABI).  The same applies to Darwin (DYLD_LIBRARY_PATH),
+  # Solaris 32 bit (LD_LIBRARY_PATH_32), Solaris 64 bit (LD_LIBRARY_PATH_64),
+  # and HP-UX (SHLIB_PATH).  In some cases, the variables are independent
+  # of LD_LIBRARY_PATH, and in other cases LD_LIBRARY_PATH is used if the
+  # variable is not defined.
+  #
+  # Doing this is somewhat of a hack as ld_library_path gets repeated in
+  # SHLIB_PATH and LD_LIBRARY_PATH when unix_load sets these variables.
+  if { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARY_PATH "$ld_library_path:$orig_ld_library_path"
+  } else {
+    setenv LD_LIBRARY_PATH "$ld_library_path"
+  }
+  if { $orig_ld_run_path_saved } {
+    setenv LD_RUN_PATH "$ld_library_path:$orig_ld_run_path"
+  } else {
+    setenv LD_RUN_PATH "$ld_library_path"
+  }
+  # The default shared library dynamic path search for 64-bit
+  # HP-UX executables searches LD_LIBRARY_PATH before SHLIB_PATH.
+  # LD_LIBRARY_PATH isn't used for 32-bit executables.  Thus, we
+  # set LD_LIBRARY_PATH and SHLIB_PATH as if they were independent.
+  if { $orig_shlib_path_saved } {
+    setenv SHLIB_PATH "$ld_library_path:$orig_shlib_path"
+  } else {
+    setenv SHLIB_PATH "$ld_library_path"
+  }
+  if { $orig_ld_libraryn32_path_saved } {
+    setenv LD_LIBRARYN32_PATH "$ld_library_path:$orig_ld_libraryn32_path"
+  } elseif { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARYN32_PATH "$ld_library_path:$orig_ld_library_path"
+  } else {
+    setenv LD_LIBRARYN32_PATH "$ld_library_path"
+  }
+  if { $orig_ld_library64_path_saved } {
+    setenv LD_LIBRARY64_PATH "$ld_library_path:$orig_ld_library64_path"
+  } elseif { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARY64_PATH "$ld_library_path:$orig_ld_library_path"
+  } else {
+    setenv LD_LIBRARY64_PATH "$ld_library_path"
+  }
+  if { $orig_ld_library_path_32_saved } {
+    setenv LD_LIBRARY_PATH_32 "$ld_library_path:$orig_ld_library_path_32"
+  } elseif { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARY_PATH_32 "$ld_library_path:$orig_ld_library_path"
+  } else {
+    setenv LD_LIBRARY_PATH_32 "$ld_library_path"
+  }
+  if { $orig_ld_library_path_64_saved } {
+    setenv LD_LIBRARY_PATH_64 "$ld_library_path:$orig_ld_library_path_64"
+  } elseif { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARY_PATH_64 "$ld_library_path:$orig_ld_library_path"
+  } else {
+    setenv LD_LIBRARY_PATH_64 "$ld_library_path"
+  }
+  if { $orig_dyld_library_path_saved } {
+    setenv DYLD_LIBRARY_PATH "$ld_library_path:$orig_dyld_library_path"
+  } else {
+    setenv DYLD_LIBRARY_PATH "$ld_library_path"
+  }
+
+  verbose -log "set_ld_library_path_env_vars: ld_library_path=$ld_library_path"
+}
+
+#######################################
+# proc restore_ld_library_path_env_vars { }
+#######################################
+
+proc restore_ld_library_path_env_vars { } {
+  global orig_environment_saved
+  global orig_ld_library_path_saved
+  global orig_ld_run_path_saved
+  global orig_shlib_path_saved
+  global orig_ld_libraryn32_path_saved
+  global orig_ld_library64_path_saved
+  global orig_ld_library_path_32_saved
+  global orig_ld_library_path_64_saved
+  global orig_dyld_library_path_saved
+  global orig_ld_library_path
+  global orig_ld_run_path
+  global orig_shlib_path
+  global orig_ld_libraryn32_path
+  global orig_ld_library64_path
+  global orig_ld_library_path_32
+  global orig_ld_library_path_64
+  global orig_dyld_library_path
+
+  if { $orig_environment_saved == 0 } {
+    return
+  }
+
+  if { $orig_ld_library_path_saved } {
+    setenv LD_LIBRARY_PATH "$orig_ld_library_path"
+  } elseif [info exists env(LD_LIBRARY_PATH)] {
+    unsetenv LD_LIBRARY_PATH
+  }
+  if { $orig_ld_run_path_saved } {
+    setenv LD_RUN_PATH "$orig_ld_run_path"
+  } elseif [info exists env(LD_RUN_PATH)] {
+    unsetenv LD_RUN_PATH
+  }
+  if { $orig_shlib_path_saved } {
+    setenv SHLIB_PATH "$orig_shlib_path"
+  } elseif [info exists env(SHLIB_PATH)] {
+    unsetenv SHLIB_PATH
+  }
+  if { $orig_ld_libraryn32_path_saved } {
+    setenv LD_LIBRARYN32_PATH "$orig_ld_libraryn32_path"
+  } elseif [info exists env(LD_LIBRARYN32_PATH)] {
+    unsetenv LD_LIBRARYN32_PATH
+  }
+  if { $orig_ld_library64_path_saved } {
+    setenv LD_LIBRARY64_PATH "$orig_ld_library64_path"
+  } elseif [info exists env(LD_LIBRARY64_PATH)] {
+    unsetenv LD_LIBRARY64_PATH
+  }
+  if { $orig_ld_library_path_32_saved } {
+    setenv LD_LIBRARY_PATH_32 "$orig_ld_library_path_32"
+  } elseif [info exists env(LD_LIBRARY_PATH_32)] {
+    unsetenv LD_LIBRARY_PATH_32
+  }
+  if { $orig_ld_library_path_64_saved } {
+    setenv LD_LIBRARY_PATH_64 "$orig_ld_library_path_64"
+  } elseif [info exists env(LD_LIBRARY_PATH_64)] {
+    unsetenv LD_LIBRARY_PATH_64
+  }
+  if { $orig_dyld_library_path_saved } {
+    setenv DYLD_LIBRARY_PATH "$orig_dyld_library_path"
+  } elseif [info exists env(DYLD_LIBRARY_PATH)] {
+    unsetenv DYLD_LIBRARY_PATH
+  }
+}
+
+#######################################
+# proc get_shlib_extension { }
+#######################################
+
+proc get_shlib_extension { } {
+    global shlib_ext
+
+    if { [ istarget *-*-darwin* ] } {
+	set shlib_ext "dylib"
+    } elseif { [ istarget *-*-cygwin* ] || [ istarget *-*-mingw* ] } {
+	set shlib_ext "dll"
+    } elseif { [ istarget hppa*-*-hpux* ] } {
+	set shlib_ext "sl"
+    } else {
+	set shlib_ext "so"
+    }
+    return $shlib_ext
+}
+
Index: libffi/testsuite/lib/wrapper.exp
===================================================================
--- /dev/null
+++ libffi/testsuite/lib/wrapper.exp
@@ -0,0 +1,45 @@
+#   Copyright (C) 2004, 2007 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+
+# This file contains GCC-specifics for status wrappers for test programs.
+
+# ${tool}_maybe_build_wrapper -- Build wrapper object if the target
+# needs it.  FILENAME is the path to the wrapper file.  If there are
+# additional arguments, they are command-line options to provide to
+# the compiler when compiling FILENAME.
+
+proc ${tool}_maybe_build_wrapper { filename args } {
+    global gluefile wrap_flags
+
+    if { [target_info needs_status_wrapper] != "" \
+ 	 && [target_info needs_status_wrapper] != "0" \
+	 && ![info exists gluefile] } {
+	set saved_wrap_compile_flags [target_info wrap_compile_flags]
+	set flags [join $args " "]
+	# The wrapper code may contain code that gcc objects on.  This
+	# became true for dejagnu-1.4.4.  The set of warnings and code
+	# that gcc objects on may change, so just make sure -w is always
+	# passed to turn off all warnings.
+	set_currtarget_info wrap_compile_flags \
+	    "$saved_wrap_compile_flags -w $flags"
+	set result [build_wrapper $filename]
+	set_currtarget_info wrap_compile_flags "$saved_wrap_compile_flags"
+	if { $result != "" } {
+	    set gluefile [lindex $result 0]
+	    set wrap_flags [lindex $result 1]
+	}
+    }
+}
Index: libffi/include/Makefile.am
===================================================================
--- libffi.orig/include/Makefile.am
+++ libffi/include/Makefile.am
@@ -5,8 +5,5 @@ AUTOMAKE_OPTIONS=foreign
 DISTCLEANFILES=ffitarget.h
 EXTRA_DIST=ffi.h.in ffi_common.h
 
-# Where generated headers like ffitarget.h get installed.
-gcc_version   := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
-toollibffidir := $(libdir)/gcc/$(target_alias)/$(gcc_version)/include
-
-toollibffi_HEADERS = ffi.h ffitarget.h
+includesdir = $(libdir)/@PACKAGE_NAME@-@PACKAGE_VERSION@/include
+nodist_includes_HEADERS = ffi.h ffitarget.h
Index: libffi/README
===================================================================
--- libffi.orig/README
+++ libffi/README
@@ -1,10 +1,7 @@
-This directory contains the libffi package, which is not part of GCC but
-shipped with GCC as convenience.
-
 Status
 ======
 
-libffi-3.0.9 was released on December 31, 2009. Check the libffi web
+libffi-3.0.11 was released on *****************. Check the libffi web
 page for updates: <URL:http://sourceware.org/libffi/>.
 
 
@@ -46,7 +43,7 @@ Libffi has been ported to many different
 For specific configuration details and testing status, please
 refer to the wiki page here:
 
- http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.9
+ http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.11
 
 At the time of release, the following basic configurations have been
 tested:
@@ -55,12 +52,16 @@ tested:
 | Architecture | Operating System |
 |--------------+------------------|
 | Alpha        | Linux            |
+| Alpha        | Tru64            |
 | ARM          | Linux            |
+| ARM          | iOS              |
 | AVR32        | Linux            |
 | HPPA         | HPUX             |
 | IA-64        | Linux            |
+| M68K         | RTEMS            |
 | MIPS         | IRIX             |
 | MIPS         | Linux            |
+| MIPS         | RTEMS            |
 | MIPS64       | Linux            |
 | PowerPC      | Linux            |
 | PowerPC      | Mac OSX          |
@@ -73,6 +74,7 @@ tested:
 | SPARC64      | Linux            |
 | SPARC64      | FreeBSD          |
 | X86          | FreeBSD          |
+| X86          | Interix          |
 | X86          | kFreeBSD         |
 | X86          | Linux            |
 | X86          | Mac OSX          |
@@ -84,6 +86,7 @@ tested:
 | X86-64       | FreeBSD          |
 | X86-64       | Linux            |
 | X86-64       | OpenBSD          |
+| X86-64       | Windows/MingW    |
 |--------------+------------------|
 
 Please send additional platform test results to
@@ -115,9 +118,15 @@ It's also possible to build libffi on Wi
 Microsoft's Visual C++ compiler.  In this case, use the msvcc.sh
 wrapper script during configuration like so:
 
-path/to/configure --enable-shared --enable-static \
-	CC=path/to/msvcc.sh LD=link \
-	CPP=\"cl -nologo -EP\"
+path/to/configure CC=path/to/msvcc.sh LD=link CPP=\"cl -nologo -EP\"
+
+For 64-bit Windows builds, use CC="path/to/msvcc.sh -m64".
+You may also need to specify --build appropriately. When building with MSVC
+under a MingW environment, you may need to remove the line in configure
+that sets 'fix_srcfile_path' to a 'cygpath' command. ('cygpath' is not
+present in MingW, and is not required when using MingW-style paths.)
+
+For iOS builds, refer to the build-ios.sh script for guidance.
 
 Configure has many other options. Use "configure --help" to see them all.
 
@@ -135,11 +144,22 @@ History
 
 See the ChangeLog files for details.
 
-3.0.10 ???-??-??
+3.0.11 MMM-DD-YY
+        ??????????
+
+3.0.10 Aug-23-11
+        Add support for Apple's iOS.
+	Add support for ARM VFP ABI.
+        Add RTEMS support for MIPS and M68K.
+	Fix instruction cache clearing problems on
+	  ARM and SPARC.
 	Fix the N64 build on mips-sgi-irix6.5.
-	Testsuite fixes for Tru64 Unix.
 	Enable builds with Microsoft's compiler.
-	Enable x86 builds with Sun's compiler.
+	Enable x86 builds with Oracle's Solaris compiler.
+	Fix support for calling code compiled with Oracle's Sparc
+	  Solaris compiler.
+	Testsuite fixes for Tru64 Unix.
+	Additional platform support.
 
 3.0.9 Dec-31-09
         Add AVR32 and win64 ports.  Add ARM softfp support.
@@ -320,5 +340,6 @@ Alex Oliva solved the executable page pr
 The list above is almost certainly incomplete and inaccurate.  I'm
 happy to make corrections or additions upon request.
 
-If you have a problem, or have found a bug, please send a note to
-green@redhat.com.
+If you have a problem, or have found a bug, please send a note to the
+author at green@moxielogic.com, or the project mailing list at
+libffi-discuss@sourceware.org.
Index: libffi/testsuite/Makefile.am
===================================================================
--- libffi.orig/testsuite/Makefile.am
+++ libffi/testsuite/Makefile.am
@@ -14,3 +14,67 @@ RUNTEST = `if [ -f $(top_srcdir)/../deja
 AM_RUNTESTFLAGS =
 
 CLEANFILES = *.exe core* *.log *.sum
+
+EXTRA_DIST = libffi.special/special.exp	\
+libffi.special/unwindtest_ffi_call.cc libffi.special/unwindtest.cc \
+libffi.special/ffitestcxx.h config/default.exp lib/target-libpath.exp \
+lib/libffi.exp lib/wrapper.exp libffi.call/float.c \
+libffi.call/cls_multi_schar.c libffi.call/float3.c \
+libffi.call/cls_3_1byte.c libffi.call/stret_large2.c \
+libffi.call/cls_5_1_byte.c libffi.call/stret_medium.c \
+libffi.call/promotion.c libffi.call/cls_dbls_struct.c \
+libffi.call/nested_struct.c libffi.call/closure_fn1.c \
+libffi.call/cls_4_1byte.c libffi.call/cls_float.c \
+libffi.call/cls_2byte.c libffi.call/closure_fn4.c \
+libffi.call/return_fl2.c libffi.call/nested_struct7.c \
+libffi.call/cls_uint.c libffi.call/cls_align_sint64.c \
+libffi.call/float1.c libffi.call/cls_19byte.c \
+libffi.call/nested_struct1.c libffi.call/cls_4byte.c \
+libffi.call/return_fl1.c libffi.call/cls_align_pointer.c \
+libffi.call/nested_struct4.c libffi.call/nested_struct3.c \
+libffi.call/struct7.c libffi.call/nested_struct9.c \
+libffi.call/cls_sshort.c libffi.call/cls_ulonglong.c \
+libffi.call/cls_pointer_stack.c libffi.call/cls_multi_uchar.c \
+libffi.call/testclosure.c libffi.call/cls_3byte1.c \
+libffi.call/struct6.c libffi.call/return_uc.c libffi.call/return_ll1.c \
+libffi.call/cls_ushort.c libffi.call/stret_medium2.c \
+libffi.call/cls_multi_ushortchar.c libffi.call/return_dbl2.c \
+libffi.call/closure_loc_fn0.c libffi.call/return_sc.c \
+libffi.call/nested_struct8.c libffi.call/cls_7_1_byte.c	\
+libffi.call/return_ll.c libffi.call/cls_pointer.c \
+libffi.call/err_bad_abi.c libffi.call/return_dbl1.c \
+libffi.call/call.exp libffi.call/ffitest.h libffi.call/strlen.c	\
+libffi.call/return_sl.c libffi.call/cls_1_1byte.c \
+libffi.call/struct1.c libffi.call/cls_64byte.c libffi.call/return_ul.c \
+libffi.call/cls_double.c libffi.call/many_win32.c \
+libffi.call/cls_16byte.c libffi.call/cls_align_double.c	\
+libffi.call/cls_align_uint16.c libffi.call/cls_9byte1.c	\
+libffi.call/cls_multi_sshortchar.c libffi.call/cls_multi_ushort.c \
+libffi.call/closure_stdcall.c libffi.call/return_fl.c \
+libffi.call/strlen_win32.c libffi.call/return_ldl.c \
+libffi.call/cls_align_float.c libffi.call/struct3.c \
+libffi.call/cls_uchar.c libffi.call/cls_sint.c libffi.call/float2.c \
+libffi.call/cls_align_longdouble_split.c \
+libffi.call/cls_longdouble_va.c libffi.call/cls_multi_sshort.c \
+libffi.call/stret_large.c libffi.call/cls_align_sint16.c \
+libffi.call/nested_struct6.c libffi.call/cls_5byte.c \
+libffi.call/return_dbl.c libffi.call/cls_20byte.c \
+libffi.call/cls_8byte.c libffi.call/pyobjc-tc.c	\
+libffi.call/cls_24byte.c libffi.call/cls_align_longdouble_split2.c \
+libffi.call/cls_6_1_byte.c libffi.call/cls_schar.c \
+libffi.call/cls_18byte.c libffi.call/closure_fn3.c \
+libffi.call/err_bad_typedef.c libffi.call/closure_fn2.c	\
+libffi.call/struct2.c libffi.call/cls_3byte2.c \
+libffi.call/cls_align_longdouble.c libffi.call/cls_20byte1.c \
+libffi.call/return_fl3.c libffi.call/cls_align_uint32.c	\
+libffi.call/problem1.c libffi.call/float4.c \
+libffi.call/cls_align_uint64.c libffi.call/struct9.c \
+libffi.call/closure_fn5.c libffi.call/cls_align_sint32.c \
+libffi.call/closure_fn0.c libffi.call/closure_fn6.c \
+libffi.call/struct4.c libffi.call/nested_struct2.c \
+libffi.call/cls_6byte.c libffi.call/cls_7byte.c libffi.call/many.c \
+libffi.call/struct8.c libffi.call/negint.c libffi.call/struct5.c \
+libffi.call/cls_12byte.c libffi.call/cls_double_va.c \
+libffi.call/cls_longdouble.c libffi.call/cls_9byte2.c \
+libffi.call/nested_struct10.c libffi.call/nested_struct5.c \
+libffi.call/huge_struct.c
Index: libffi/testsuite/lib/libffi.exp
===================================================================
--- libffi.orig/testsuite/lib/libffi.exp
+++ libffi/testsuite/lib/libffi.exp
@@ -1,4 +1,4 @@
-#   Copyright (C) 2003, 2005, 2008, 2009, 2010 Free Software Foundation, Inc.
+#   Copyright (C) 2003, 2005, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,7 +16,7 @@
 
 proc load_gcc_lib { filename } {
     global srcdir
-    load_file $srcdir/../../gcc/testsuite/lib/$filename
+    load_file $srcdir/lib/$filename
 }
 
 load_lib dg.exp
@@ -94,7 +94,6 @@ proc libffi-init { args } {
     global srcdir
     global blddirffi
     global objdir
-    global blddircxx
     global TOOL_OPTIONS
     global tool
     global libffi_include
@@ -102,10 +101,8 @@ proc libffi-init { args } {
     global tool_root_dir
     global ld_library_path
 
-    set blddirffi [lookfor_file [get_multilibs] libffi]
+    set blddirffi [pwd]/.. 
     verbose "libffi $blddirffi"
-    set blddircxx [lookfor_file [get_multilibs] libstdc++-v3]
-    verbose "libstdc++ $blddircxx"
 
     set gccdir [lookfor_file $tool_root_dir gcc/libgcc.a]
     if {$gccdir != ""} {
@@ -132,8 +129,6 @@ proc libffi-init { args } {
     }
     # add the library path for libffi.
     append ld_library_path ":${blddirffi}/.libs"
-    # add the library path for libstdc++ as well.
-    append ld_library_path ":${blddircxx}/src/.libs"
 
     verbose "ld_library_path: $ld_library_path"
 
@@ -146,7 +141,6 @@ proc libffi-init { args } {
     if { $libffi_dir != "" } {
 	set libffi_dir [file dirname ${libffi_dir}]
 	set libffi_link_flags "-L${libffi_dir}/.libs"
-	lappend libffi_link_flags "-L${blddircxx}/src/.libs"
     }
 
     set_ld_library_path_env_vars
Index: libffi/m4/asmcfi.m4
===================================================================
--- /dev/null
+++ libffi/m4/asmcfi.m4
@@ -0,0 +1,13 @@
+AC_DEFUN([GCC_AS_CFI_PSEUDO_OP],
+[AC_CACHE_CHECK([assembler .cfi pseudo-op support],
+    gcc_cv_as_cfi_pseudo_op, [
+    gcc_cv_as_cfi_pseudo_op=unknown
+    AC_TRY_COMPILE([asm (".cfi_startproc\n\t.cfi_endproc");],,
+		   [gcc_cv_as_cfi_pseudo_op=yes],
+		   [gcc_cv_as_cfi_pseudo_op=no])
+ ])
+ if test "x$gcc_cv_as_cfi_pseudo_op" = xyes; then
+    AC_DEFINE(HAVE_AS_CFI_PSEUDO_OP, 1,
+	      [Define if your assembler supports .cfi_* directives.])
+ fi
+])