Remove example-clients and tools (#112)

.gitmodules:
Remove the submodules for example-clients and tools, as they are now
tracked in the separate project jack-example-tools
(https://github.com/jackaudio/jack-example-tools).

{Makefile.am,configure.ac}:
Remove all use of example-clients and tools and their respective
dependencies from the build system.

config/os/macosx/README:
Remove mentions of example-clients dependencies from OSX README.

doc/{Makefile.am,reference.doxygen.in}:
Remove all use of example-clients from the documentation generation.

man/*.0:
Remove all man pages now owned by jack-example-tools.

27 files changed, 2 insertions, 734 deletions

diff --git a/.gitmodules b/.gitmodules
index 24410fa..6a68287 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -1,9 +1,3 @@
-[submodule "example-clients"]
-	path = example-clients
-	url = https://github.com/jackaudio/example-clients
 [submodule "jack"]
 	path = jack
 	url = https://github.com/jackaudio/headers
-[submodule "tools"]
-	path = tools
-	url = https://github.com/jackaudio/tools
diff --git a/Makefile.am b/Makefile.am
index 82b69d4..da912a8 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -15,8 +15,8 @@ dist-check-doxygen:
 	@false
 endif
 
-SUBDIRS =      libjack jackd drivers example-clients tools config $(DOC_DIR) man python
-DIST_SUBDIRS = config libjack jackd include drivers example-clients tools doc man python
+SUBDIRS =      libjack jackd drivers config $(DOC_DIR) man python
+DIST_SUBDIRS = config libjack jackd include drivers doc man python
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = jack.pc
diff --git a/config/os/macosx/README b/config/os/macosx/README
index 33f5692..87e3e5e 100644
--- a/config/os/macosx/README
+++ b/config/os/macosx/README
@@ -17,8 +17,6 @@ optional tools
   libtool >= 1.5	(to build from CVS)
   pkg-config >= 0.15.0  (to build from CVS)
   doxygen		(to build documentation)
-  libsndfile >= 1.0.0	(for some example-clients)
-  GNU readline		(for some example-clients)
 
 All non-Apple tools are available from `fink' or `darwinports'.
 
diff --git a/configure.ac b/configure.ac
index 4aa387e..ee0683b 100644
--- a/configure.ac
+++ b/configure.ac
@@ -679,13 +679,6 @@ if test "x$USE_BARRIER" = "xyes"; then
 		AC_DEFINE(USE_BARRIER, 1, [Use pthread barrier functions]))
 fi
 
-# some example-clients need libsndfile
-HAVE_SNDFILE=false
-PKG_CHECK_MODULES(SNDFILE, sndfile >= 1.0,[HAVE_SNDFILE=true], [true])
-if test x$HAVE_SNDFILE = xfalse; then
-             AC_MSG_WARN([*** the jackrec example client will not be built])
-fi
-
 # NetJack backend and internal client need libsamplerate
 HAVE_SAMPLERATE=false
 PKG_CHECK_MODULES(SAMPLERATE, samplerate >= 0.1.2,[HAVE_SAMPLERATE=true], [true])
@@ -698,45 +691,6 @@ else
     	AC_DEFINE(HAVE_SAMPLERATE,1,"Whether libsamplerate is available")
 fi
 
-# if we have Fons Adriensen's zita libs installed, we can build the zita-based
-# internal clients for using additional (ALSA) devices with JACK
-
-HAVE_ZITA_BRIDGE_DEPS=false
-HAVE_ZITA_RESAMPLE=false
-HAVE_ZITA_ALSA_PCMI=false
-
-case $build_os in
-     linux*)
-      AC_CHECK_LIB(zita-resampler, _Z28zita_resampler_major_versionv,
-            [
-               HAVE_ZITA_RESAMPLE=true
-               AC_MSG_RESULT(yes)
-            ])
-      AC_CHECK_LIB(zita-alsa-pcmi, _Z28zita_alsa_pcmi_major_versionv,
-            [
-               HAVE_ZITA_ALSA_PCMI=true
-               AC_MSG_RESULT(yes)
-            ])
-
-     AC_ARG_ENABLE(zalsa,
-           AC_HELP_STRING([--enable-zalsa],[Build clients using Fons Adriensen\'s Zita libraries for access to multiple devices (default=yes if required libraries are present)]),
-           [
-               if test x$enable_zalsa != xno -a x$HAVE_ZITA_RESAMPLE = xtrue -a x$HAVE_ZITA_ALSA_PCMI = xtrue ; then
-                   AC_DEFINE(HAVE_ZITA_BRIDGE_DEPS,1,"Whether we have the libs needed for Zita ALSA bridge support")
-                   HAVE_ZITA_BRIDGE_DEPS=true
-               fi
-           ],
-           [
-               if test x$HAVE_ZITA_RESAMPLE = xtrue -a x$HAVE_ZITA_ALSA_PCMI = xtrue ; then
-                   AC_DEFINE(HAVE_ZITA_BRIDGE_DEPS,1,"Whether we have the libs needed for Zita ALSA bridge support")
-                   HAVE_ZITA_BRIDGE_DEPS=true
-               fi
-           ]
-     )
-     ;;
-esac
-AM_CONDITIONAL(HAVE_ZITA_ALSA_PCMI, $HAVE_ZITA_ALSA_PCMI)
-
 # Celt low-latency audio codec. netjack transmission via internet.
 HAVE_CELT=false
 PKG_CHECK_MODULES(CELT, celt >= 0.8.0,[HAVE_CELT=true], [true])
@@ -923,44 +877,18 @@ AC_DEFINE_UNQUOTED(JACK_SEMAPHORE_KEY,
 	  [ an integer constant used as the semaphore and SysV SHM key. see libjack/shm.c for usage])
 AC_SUBST(JACK_SEMAPHORE_KEY)
 
-# On some systems, readline depends on termcap or ncurses.  But, the
-# MacOSX linker complains bitterly if these libraries are explicitly
-# referenced.
-#
-# AC_CHECK_LIB() foolishly assumes that checking a library for an entry
-# point always returns the same result regardless of any dependent
-# libraries specified.  The `unset ac_cv_lib_readline_readline' erases
-# the cached result to work around this problem.
-READLINE_DEPS=""
-HAVE_READLINE=true
-AC_CHECK_LIB(readline, readline, [:],
-    [unset ac_cv_lib_readline_readline
-     AC_CHECK_LIB(readline, readline, [READLINE_DEPS="-ltermcap"],
-        [unset ac_cv_lib_readline_readline
-	 AC_CHECK_LIB(readline, readline,
-	    [READLINE_DEPS="-lncurses"], [HAVE_READLINE=false], "-lncurses")],
-	"-ltermcap")])
-AC_CHECK_HEADER(readline/chardefs.h, [], [HAVE_READLINE=false])
-if test x$HAVE_READLINE = xfalse; then
-	AC_MSG_WARN([*** the jack_transport example client will not be built])
-fi
-AC_SUBST(READLINE_DEPS)
-
 # you need doxygen to make dist.
 AC_CHECK_PROG(HAVE_DOXYGEN, doxygen, true, false)
 if test $HAVE_DOXYGEN = "false"; then
              AC_MSG_WARN([*** doxygen not found, docs will not be built])
 fi
 
-AM_CONDITIONAL(HAVE_SNDFILE, $HAVE_SNDFILE)
 AM_CONDITIONAL(HAVE_CELT, $HAVE_CELT)
 AM_CONDITIONAL(HAVE_SAMPLERATE, $HAVE_SAMPLERATE)
-AM_CONDITIONAL(HAVE_READLINE, $HAVE_READLINE)
 AM_CONDITIONAL(HAVE_DOXYGEN, $HAVE_DOXYGEN)
 AM_CONDITIONAL(USE_CAPABILITIES, $USE_CAPABILITIES)
 AM_CONDITIONAL(STRIPPED_JACKD, $STRIPPED_JACKD)
 AM_CONDITIONAL(HAVE_PPOLL, $HAVE_PPOLL)
-AM_CONDITIONAL(HAVE_ZITA_BRIDGE_DEPS, $HAVE_ZITA_BRIDGE_DEPS)
 
 AC_OUTPUT(
 Makefile
@@ -984,9 +912,6 @@ drivers/coreaudio/Makefile
 drivers/freebob/Makefile
 drivers/firewire/Makefile
 drivers/netjack/Makefile
-example-clients/Makefile
-tools/Makefile
-tools/zalsa/Makefile
 man/Makefile
 jack.pc
 jack.spec
@@ -1015,7 +940,6 @@ echo \| Build with CoreAudio support.......................... : $HAVE_COREAUDIO
 echo \| Build with PortAudio support.......................... : $HAVE_PA
 echo \| Build with Celt support............................... : $HAVE_CELT
 echo \| Build with dynamic buffer size support................ : $buffer_resizing
-echo \| Build with ZITA ALSA bridge support................... : $HAVE_ZITA_BRIDGE_DEPS
 echo \| Compiler optimization flags........................... : $JACK_OPT_CFLAGS
 echo \| Compiler full flags................................... : $CFLAGS
 echo \| Install dir for libjack + backends.................... : $libdir/jack
diff --git a/doc/Makefile.am b/doc/Makefile.am
index 3c66318..fb04d89 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -5,8 +5,6 @@ CLEANFILES=doxygen-build.stamp
 
 DOX=reference.doxygen
 DOXSOURCES=mainpage.dox transport.dox porting.dox fsm.png fsm.eps \
-	../example-clients/inprocess.c \
-	../example-clients/simple_client.c \
 	../jack/control.h \
 	../jack/intclient.h \
 	../jack/jack.h \
diff --git a/doc/reference.doxygen.in b/doc/reference.doxygen.in
index fbbba0c..4f8294f 100644
--- a/doc/reference.doxygen.in
+++ b/doc/reference.doxygen.in
@@ -516,8 +516,6 @@ WARN_LOGFILE           =
 INPUT                  = @top_srcdir@/doc/mainpage.dox \
                          @top_srcdir@/doc/transport.dox \
                          @top_srcdir@/doc/porting.dox \
-                         @top_srcdir@/example-clients/inprocess.c \
-                         @top_srcdir@/example-clients/simple_client.c \
                          @top_srcdir@/jack/control.h \
                          @top_srcdir@/jack/intclient.h \
                          @top_srcdir@/jack/jack.h \
diff --git a/man/alsa_in.0 b/man/alsa_in.0
deleted file mode 100644
index f97c5ca..0000000
--- a/man/alsa_in.0
+++ /dev/null
@@ -1,98 +0,0 @@
-.TH ALSA_IO "1" "!DATE!" "!VERSION!"
-.SH NAME
-\fBalsa_in\fR, \fBalsa_out\fR \- Jack clients that perform I/O with an alternate audio interface
-.SH SYNOPSIS
-\fBalsa_in\fR [\fIoptions\fR]
-.br
-\fBalsa_out\fR [\fIoptions\fR]
-
-.SH DESCRIPTION
-A JACK client that opens a specified audio interface (different to the
-one used by the JACK server, if any) and moves audio data between its
-JACK ports and the interface. alsa_in will provide data from the
-interface (potentially for capture); alsa_out will deliver data to it
-(for playback).
-
-The audio interface used by alsa_in/alsa_out does not need to be
-synchronized with JACK backend (or the hardware it might be using).
-alsa_in/alsa_out tries to resample the output stream in an attempt to
-compensate for drift between the two clocks.
-
-As of jack-0.116.3 this works almost perfectly. It takes some time, to reach
-absolute resample-rate stability. So give it some minutes (its intended to be
-running permanently anyways)
-
-.SH OPTIONS
-.TP
-\fB\-j \fI jack_client_name\fR
-.br
-Set Client Name.
-.TP
-\fB\-d \fI alsa_device\fR  
-.br
-Use this Soundcard.
-.TP
-\fB\-v\fR  
-.br
-Verbose, prints out resample coefficient and other parameters useful for debugging, every 500ms.
-also reports soft xruns. 
-.TP
-\fB\-i\fR  
-.br
-Instrumentation. This logs the 4 important parameters of the samplerate control algorithm every 1ms.
-You can pipe this into a file, and plot it. Should only be necessary, if it does not work as
-expected, and we need to adjust some of the obscure parameters, to make it work. 
-Find me on irc.freenode.org #jack in order to set this up correctly.
-.TP
-\fB\-c \fI channels\fR  
-.br
-Set Number of channels.
-.TP
-\fB\-r \fI sample_rate\fR  
-.br
-Set sample_rate. The program resamples as necessary.
-So you can connect a 44k1 jackd to a soundcard only supporting
-48k. (default is jack sample_rate)
-.TP
-\fB\-p \fI period_size\fR  
-.br
-Set the period size. It is not related to the jackd period_size.
-Sometimes it affects the quality of the delay measurements.
-Setting this lower than the jackd period_size will only work, if you
-use a higher number of periods. 
-.TP
-\fB\-n \fI num_period\fR  
-.br
-Set number of periods. See note for period_size.
-.TP
-\fB\-q \fI quality\fR  
-.br
-Set the quality of the resampler from 0 to 4. This can significanly reduce
-CPU usage. Higher values give better quality and more CPU usage.
-.TP
-\fB\-m \fI max_diff\fR  
-.br
-The value when a soft xrun occurs. Basically the window, in which
-the dma pointer may jitter. I don't think its necessary to play with this anymore. 
-.TP
-\fB\-t \fI target_delay\fR  
-.br
-The delay alsa_io should try to approach. Same as for max_diff. It will be setup based on \-p and \-n
-which is generally sufficient.
-.TP
-\fB\-s \fI smooth_array_size\fR  
-.br
-This parameter controls the size of the array used for smoothing the delay measurement. Its default is 256.
-If you use a pretty low period size, you can lower the CPU usage a bit by decreasing this parameter.
-However most CPU time is spent in the resampling so this will not be much.
-.TP
-\fB\-C \fI P Control Clamp\fR  
-.br
-If you have a PCI card, then the default value (15) of this parameter is too high for \-p64 \-n2... Setting it to 5 should fix that.
-Be aware that setting this parameter too low, lets the hf noise on the delay measurement come through onto the resamplerate, so this
-might degrade the quality of the output. (but its a threshold value, and it has been chosen, to mask the noise of a USB card,
-which has an amplitude which is 50 times higher than that of a PCI card, so 5 wont loose you any quality on a PCI card)
-
-.SH AUTHOR
-Torben Hohn
-
diff --git a/man/alsa_out.0 b/man/alsa_out.0
deleted file mode 100644
index 7b63b85..0000000
--- a/man/alsa_out.0
+++ /dev/null
@@ -1 +0,0 @@
-.so man1/alsa_in.1
diff --git a/man/jack_bufsize.0 b/man/jack_bufsize.0
deleted file mode 100644
index f9d0dd6..0000000
--- a/man/jack_bufsize.0
+++ /dev/null
@@ -1,14 +0,0 @@
-.TH JACK_BUFSIZE "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_bufsize \- JACK toolkit client to change the JACK buffer size
-.SH SYNOPSIS
-.B jack_bufsize bufsize
-.SH DESCRIPTION
-.B jack_bufsize
-jack_bufsize sets the size of the buffer (frames per period) used in JACK. 
-This change happens on-line (the JACK server and its clients do not need to be 
-restarted).
-.br
-When invoked without arguments, it prints the current bufsize, and exits.
-
-
diff --git a/man/jack_connect.0 b/man/jack_connect.0
deleted file mode 100644
index 5ee8f8b..0000000
--- a/man/jack_connect.0
+++ /dev/null
@@ -1,11 +0,0 @@
-.TH JACK_CONNECT "1" "!DATE!" "!VERSION!"
-.SH NAME
-\fBjack_connect\fR, \fBjack_disconnect\fR \- JACK toolkit clients for connecting & disconnecting ports
-.SH SYNOPSIS
-\fB jack_connect\fR [ \fI-s\fR | \fI--server servername\fR ] [\fI-h\fR | \fI--help\fR ] port1 port2
-\fB jack_disconnect\fR [ \fI-s\fR | \fI--server servername\fR ] [\fI-h\fR | \fI--help\fR ] port1 port2
-.SH DESCRIPTION
-\fBjack_connect\fR connects the two named ports. \fBjack_disconnect\fR disconnects the two named ports.
-.SH RETURNS
-The exit status is zero if successful, 1 otherwise
-
diff --git a/man/jack_disconnect.0 b/man/jack_disconnect.0
deleted file mode 100644
index 90300cc..0000000
--- a/man/jack_disconnect.0
+++ /dev/null
@@ -1 +0,0 @@
-.so man1/jack_connect.1
diff --git a/man/jack_freewheel.0 b/man/jack_freewheel.0
deleted file mode 100644
index 0941ffd..0000000
--- a/man/jack_freewheel.0
+++ /dev/null
@@ -1,16 +0,0 @@
-.TH JACK_FREEWHEEL "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_freewheel \- JACK toolkit client to control freewheeling mode
-.SH SYNOPSIS
-.B jack_freewheel [y|n]
-.SH DESCRIPTION
-.B jack_freewheel
-Turns freewheeling mode on (y) or off (n). While in freewheeling mode,
-the JACK server does not wait in between process() calls, and does not
-read or write data from/to any audio interface. That results in the JACK graph
-processing data as fast as possible. Freewheeling makes fast exports to 
-files possible.
-.PP
-There is no useful reason to use this tool other than testing. JACK
-clients that use freewheeling will turn it on and off themselves.
-
diff --git a/man/jack_impulse_grabber.0 b/man/jack_impulse_grabber.0
deleted file mode 100644
index 544716b..0000000
--- a/man/jack_impulse_grabber.0
+++ /dev/null
@@ -1,11 +0,0 @@
-.TH JACK_IMPULSE_GRABBER "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_impulse_grabber \- JACK toolkit client to grab an impulse (response)
-.SH SYNOPSIS
-\fBjack_impulse_grabber\fR \fB-d\fR \fIduration\fR [\fI-f\fR (C|gnuplot)]
-.SH DESCRIPTION
-\fBjack_impulse_grabber\fR is a JACK example client for collecting
-impulses recordings from JACK ports.
-
-
-
diff --git a/man/jack_iodelay.0 b/man/jack_iodelay.0
deleted file mode 100644
index 007e65a..0000000
--- a/man/jack_iodelay.0
+++ /dev/null
@@ -1,53 +0,0 @@
-.TH JACK_IODELAY "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_iodelay \- JACK toolkit client to measure roundtrip latency
-.SH SYNOPSIS
-.B jack_iodelay
-.SH DESCRIPTION
-.B jack_iodelay
-will create one input and one output port, and then
-measures the latency (signal delay) between them. For this to work,
-the output port must be connected to its input port. The measurement
-is accurate to a resolution of greater than 1 sample.
-.PP
-The expected use is to connect jack_iodelay's output port to a
-hardware playback port, then use a physical loopback cable from the
-corresponding hardware output connector to an input connector, and to
-connect that corresponding hardware capture port to jack_iodelay's
-input port. This creates a roundtrip that goes through any
-analog-to-digital or digital-converters that are present in the audio
-hardware. 
-.PP
-Although the hardware loopback latency is the expected use, it is also
-possible to use jack_iodelay to measure the latency along any fully
-connected signal path, such as those involving other JACK clients.
-.PP
-Once jack_iodelay completes its measurement it will print the total
-latency it has detected. This will include the JACK period length in
-addition to any other latency in the signal path. It will continue to
-print the value every 0.5 seconds or so so that if you wish you can
-vary aspects of the signal path to see their effect on the measured
-latency.
-.PP
-If no incoming signal is detected from the input port, jack_iodelay
-will print 
-.PP
-\fT Signal below threshold... .\fR
-.PP
-every second until this changes (e.g. until you establish the correct connections).
-.PP
-To use the value measured by jack_iodelay with the -I and -O arguments
-of a JACK backend (also called Input Latency and Output Latency in the
-setup dialog of qjackctl), you must subtract the JACK period size from
-the result. Then, if you believe that the latency is equally
-distributed between the input and output parts of your audio hardware
-(extremely likely), divide the result by two and use that for input
-and/or output latency value. Doing this measurement will enable JACK
-clients that use the JACK latency API to accurately position/delay
-audio to keep signals synchronized even when there are inherent delays
-in the end-to-end signal pathways.
-.SH AUTHOR
-Originally written in C++ by Fons Adriensen, ported to C by Torben Hohn.
-
-
-
diff --git a/man/jack_load.0 b/man/jack_load.0
deleted file mode 100644
index 599116e..0000000
--- a/man/jack_load.0
+++ /dev/null
@@ -1,28 +0,0 @@
-.TH JACK_LOAD "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_load \- JACK toolkit client for loading in-process clients
-.SH SYNOPSIS
-\fBjack_load\fR [ \fI-i\fR initstring ] [ \fI-s\fR servername ] [\fI-w\fR ] client-name so-name [ initstring ]
-.SH DESCRIPTION
-\fBjack_load\fR is a JACK toolkit client. It loads the specified plugin and creates an in-process client.
-.SH ARGUMENTS
-.PP
-The client-name must be a currently unused client name.
-.PP
-The so-name is the name of file that client code is stored in (typically, \fIclientname.so\fR)
-.SH OPTIONS
-.TP
-\fB-i\fR, \fB--init\fR init-string
-.br
-initialization string passed to the in-process client. Note that this can also be specified as the last argument on the command line.
-.TP
-\fB-s\fR, \fB--server\fR servername
-.br
-Name of JACK server to connect to
-.TP
-\fB-w\fR, \fB--wait\fR
-Wait for a signal (eg. from Ctrl-c) and then unload the client.
-.SH AUTHOR
-Jeremy Hall
-
-
diff --git a/man/jack_load_test.0 b/man/jack_load_test.0
deleted file mode 100644
index 2122608..0000000
--- a/man/jack_load_test.0
+++ /dev/null
@@ -1,11 +0,0 @@
-.TH JACK_LOAD_TEST "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_load_test \- JACK toolkit client which occupies the cpu for some time in process.
-.SH SYNOPSIS
-.B jack_load_test -t \fItime\fR
-.SH DESCRIPTION
-.B jack_load_test
-jack_load_test is a client without ports, which just occupies the cpu for \fItime\fR
-miliseconds. It is quite useful to test jackd behaviour under load.
-
-
diff --git a/man/jack_lsp.0 b/man/jack_lsp.0
deleted file mode 100644
index c3f8a6b..0000000
--- a/man/jack_lsp.0
+++ /dev/null
@@ -1,51 +0,0 @@
-.TH JACK_LSP "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_lsp \- JACK toolkit client to list informtion on ports
-.SH SYNOPSIS
-\fBjack_lsp\fR [ \fI-s\fR | \fI--server\fR servername ] [ \fI-AclLptvhuU\fR ]
-.SH DESCRIPTION
-\fBjack_lsp\fR lists all known ports associated with a JACK
-server. It can also optionally list various kinds of information about each port.
-.SH OPTIONS
-.TP
-\fB-s\fR, \fB--server\fR \fIservername\fR
-.br
-Connect to the jack server named \fIservername\fR
-.TP
-\fB-A\fR, \fB--aliases\fR
-.br
-List aliases for each port
-.TP
-\fB-c\fR, \fB--connections\fR
-.br
-List connections to/from each port
-.TP
-\fB-l\fR, \fB--latency\fR
-.br
-Display per-port latency in frames at each port
-.TP
-\fB-p\fR, \fB--properties\fR
-.br
-Display port properties. Output may include input|output, can-monitor, physical, terminal
-.TP
-\fB-t\fR, \fB--type\fR
-.br
-Display port type
-.TP
-\fB-u\fR, \fB--uuid\fR
-.br
-Display client UUIDs instead of names
-.TP
-\fB-U\fR
-.br
-Show port UUIDs as well as names
-.TP
-\fB-h\fR, \fB--help\fR
-.br
-Display help/usage message
-.TP
-\fB-v\fR, \fB--version\fR
-.br
-Output version information and exit
-
-
diff --git a/man/jack_metro.0 b/man/jack_metro.0
deleted file mode 100644
index e38a954..0000000
--- a/man/jack_metro.0
+++ /dev/null
@@ -1,40 +0,0 @@
-.TH JACK_METRO "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_metro \- JACK toolkit metronome
-.SH SYNOPSIS
-\fBjack_metro\fR [ \fI-n\fR name ] [ \fI-f\fR hz ] [ \fI-D\fR msecs ] [\fI-a\fR % ] [ \fI-d\fR % ] \fI-b\fR bpm 
-.SH DESCRIPTION
-\fBjack_metro\fR is a simple metronome for JACK. It generates a
-synthetic "tick" sound for every beat. Note that is does \fBnot\fR
-connect its output port by default - to hear the sound it makes you must
-connect them using some other tool.
-.SH OPTIONS
-.TP
-\fB-n\fR, \fB--name\fR
-.br
-Specify a name for this instance of the metronome.
-.TP
-\fB-f\fR, \fB--frequency\fR Hz
-.br
-Define the frequency of the "tick" in Hz.
-.TP
-\fB-D\fR, \fB--duration\fR msecs
-.br
-Define the duration of the "tick" in milliseconds.
-.TP
-\fB-a\fR, \fB--attack\fR %-age
-.br
-Define the duration of the attack phase of the "tick" as a percentage
-of the duration.
-.TP
-\fB-d\fR, \fB--decay\fR %-age
-.br
-Define the duration of the decay phase of the "tick" as a percentage
-of the duration.
-.TP
-\fB--b\fR, \fB--bpm\fR bpm
-.br
-Define the number of beats per minute.
-.SH AUTHOR
-Anthony Van Groningen
-
diff --git a/man/jack_monitor_client.0 b/man/jack_monitor_client.0
deleted file mode 100644
index 0991107..0000000
--- a/man/jack_monitor_client.0
+++ /dev/null
@@ -1,18 +0,0 @@
-.TH JACK_CONNECT "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_monitor_client \- The JACK Audio Connection Kit example client
-.SH SYNOPSIS
-.B jack_monitor_client
-client-name
-.PP
-The client-name must be the name of a existing client that monitoring is 
-to be enabled for.
-.SH DESCRIPTION
-.B jack_monitor_client
-is an example client for the JACK Audio Connection Kit. It enables
-monitoring for the specified client.
-.SH AUTHOR
-Jeremy Hall
-.PP
-This manpage was written by Robert Jordens <jordens@debian.org> for Debian.
-
diff --git a/man/jack_netsource.0 b/man/jack_netsource.0
deleted file mode 100644
index 5de4af7..0000000
--- a/man/jack_netsource.0
+++ /dev/null
@@ -1,109 +0,0 @@
-.TH JACK_NETSOURCE "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_netsource \- Netjack Master client for one slave
-.SH SYNOPSIS
-\fBjack_netsource\fR [ \fI-H\fR hostname ] [ \fIoptions\fR ]
-
-.SH DESCRIPTION
-\fBjack_netsource\fR The Master side of a netjack connection. Represents the slave jackd -dnet in the master jack graph.
-Most connection parameters are configured via the netsource, and the slave will set itself up according to the commandline
-option given to jack_netsource.
-.br
-Netjack allows low latency audio connections over general IP networks. When using celt for compression, it is even possible
-to establish transatlantic links, with latencies not much over the actual ping time. 
-.br
-But the main usecase is of course a LAN, where it can achieve one jack period of latency.
-
-.SH OPTIONS
-.TP
-\fB-h\fR this help text
-.TP
-\fB-H\fR \fIslave host\fR
-.br
-Host name of the slave JACK
-.TP
-\fB-o\fR \fInum channels\fR
-.br
-Number of audio playback channels
-.TP
-\fB-i\fR \fInum channels\fR
-.br
-Number of audio capture channels
-.TP
-\fB-O\fR \fInum channels\fR
-.br
-Number of midi playback channels
-.TP
-\fB-I\fR \fInum channels\fR
-.br
-Number of midi capture channels
-.TP
-\fB-n\fR \fIperiods\fR
-.br
-Network latency in JACK periods
-.TP
-\fB-p\fR \fIport\fR
-.br
-UDP port that the slave is listening on
-.TP
-\fB-r\fR \fIreply port\fR
-.br
-UDP port that we are listening on
-.TP
-\fB-B\fR \fIbind port\fR
-.br
-reply port, for use in NAT environments
-.TP
-\fB-b\fR \fIbitdepth\fR
-.br
-Set transport to use 16bit or 8bit
-.TP
-\fB-c\fR \fIbytes\fR
-.br
-Use CELT encoding with <bytes> per period and channel
-.TP
-\fB-m\fR \fImtu\fR
-.br
-Assume this mtu for the link
-.TP
-\fB-R\fR \fIN\fR
-.br
-Redundancy: send out packets N times.
-.TP
-\fB-e\fR
-.br
-skip host-to-network endianness conversion
-.TP
-\fB-N\fR \fIjack name\fR
-.br
-Reports a different client name to jack
-.TP
-.TP
-\fB-s\fR, \fB--server\fR \fIservername\fR
-.br
-Connect to the jack server named \fIservername\fR
-.TP
-\fB-h\fR, \fB--help\fR
-.br
-Display help/usage message
-.TP
-\fB-v\fR, \fB--version\fR
-.br
-Output version information and exit
-
-
-.SH EXAMPLES
-
-.PP
-run a 4 audio channel bidirectional link with one period of latency and no midi channels. Audio data is flowing uncompressed over the wire:
-.br
-On \fIhostA\fR:
-.IP
-\fBjackd \-d alsa \fR
-.br
-\fBjack_netsource \-H hostB -n1 -i4 -o4 -I0 -O0 \fR
-.PP
-On \fIhostB\fR:
-.IP
-\fBjackd \-d net \fR
-
diff --git a/man/jack_property.0 b/man/jack_property.0
deleted file mode 100644
index c78ea12..0000000
--- a/man/jack_property.0
+++ /dev/null
@@ -1,64 +0,0 @@
-.TH JACK_PROPERTY "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_property \- JACK client to list, set and delete metadata information
-.SH SYNOPSIS
-\fBjack_property\fR -l
-.br
-\fBjack_property\fR [ -c | -p ] -l \fIidentifier\fR 
-.br
-\fBjack_property\fR [ -c | -p ] -l \fIidentifier\fR \fIkey\fR
-.br
-\fBjack_property\fR [ -c | -p ] -s \fIidentifier\fR \fIkey\fR \fIvalue\fR [ \fItype\fR ]
-.br
-\fBjack_property\fR [ -c | -p ] -d \fIidentifier\fR 
-.br
-\fBjack_property\fR [ -c | -p ] -d \fIidentifier\fR \fIkey\fR
-.br
-\fBjack_property\fR -D 
-.SH DESCRIPTION
-\fBjack_property\fR can be used to list, set and delete any and all metadata associated with the ports
-and clients of a JACK server.
-.P
-There are three main ways to use the command. The \fB-l\fR option is used to list existing metadata. The \fB-s\fR option is used
-to set metadata. The \fB-d/-D\fR options are used to delete metadata.
-.P
-The \fIidentifier\fR is normally a UUID (UUIDs for ports and clients can be shown with jack_lsp(1)). If the \fB-c\fR option is used, then \fIidentifier\fR will
-be interpreted as a client name, and its UUID will be looked up internally and used for the relevant metadata operation. If the \fB-p\fR option is used, then \fIidentifier\fR will
-be interpreted as a port name and its UUID  will be looked up internally and used for the relevant metadata operation.
-.P
-The \fIkey\fR is an arbitary string that identifies the metadata to be operated upon.
-.P
-The \fIvalue\fR is an arbitrary string that defines the value of the metadata to be created.
-.P
-The \fItype\fR is an optional MIME type, given as a string. An empty type for a piece of metadata results in it being interpreted as "text/UTF-8". 
-.SH OPTIONS
-.TP 6
--l
-list all metadata currently defined
-.TP
--l identifier
-list all metadata currently defined for \fIidentifier\fR
-.TP
--l identifier key
-show the value of the metadata associated with key for \fIidentifier\fR
-.TP
--d identifier
-deletes all metadata for \fIidentifier\fR
-.TP
--d identifier key
-deletes the metadata associated with \fIkey\fR for \fIidentifier\fR
-.TP
--D
-delete all currently defined metadata
-.TP
--s identifier key value [ type ]
-sets the metadata associated with \fIkey\fR to \fIvalue\fR for \fIidentifer\fR, with its type set to \fItype\fR if given
-.TP
--c 
-interpret a given identifier as a client name rather than a UUID
-.TP 
--p
-interpret a given identifier as a port name rather than a UUID
-
-
-
diff --git a/man/jack_samplerate.0 b/man/jack_samplerate.0
deleted file mode 100644
index ef11ed0..0000000
--- a/man/jack_samplerate.0
+++ /dev/null
@@ -1,9 +0,0 @@
-.TH JACK_SAMPLERATE "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_samplerate \- JACK toolkit client to print current samplerate
-.SH SYNOPSIS
-.B jack_samplerate
-.SH DESCRIPTION
-.B jack_samplerate prints the current samplerate, and exits.
-
-
diff --git a/man/jack_showtime.0 b/man/jack_showtime.0
deleted file mode 100644
index 210caa7..0000000
--- a/man/jack_showtime.0
+++ /dev/null
@@ -1,13 +0,0 @@
-.TH JACK_SHOWTIME "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_showtime \- The JACK Audio Connection Kit example client
-.SH SYNOPSIS
-.B jack_showtime
-.SH DESCRIPTION
-.B jack_showtime
-prints the current timebase information to stdout
-.SH AUTHOR
-Paul Davis
-.PP
-This manpage was written by Stefan Schwandter <swan@debian.org>
-
diff --git a/man/jack_transport.0 b/man/jack_transport.0
deleted file mode 100644
index 6aa8ddd..0000000
--- a/man/jack_transport.0
+++ /dev/null
@@ -1,13 +0,0 @@
-.TH JACK_TRANSPORT "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_transport \- JACK toolkit client for transport control
-.SH SYNOPSIS
-.B jack_transport
-.SH DESCRIPTION
-.B jack_transport
-is a toolkit client for the JACK Audio Connection Kit. It provides command-line
-control over the JACK transport system. Type help at jack_transport's
-command prompt to see the available commands.
-.SH AUTHOR
-Jeremy Hall
-
diff --git a/man/jack_unload.0 b/man/jack_unload.0
deleted file mode 100644
index 79b1e33..0000000
--- a/man/jack_unload.0
+++ /dev/null
@@ -1,19 +0,0 @@
-.TH JACK_UNLOAD "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_unload \- The JACK Audio Connection Kit example client
-.SH SYNOPSIS
-.B jack_unload 
-client-name
-.PP
-The client-name must be the name of a loaded client that can be unloaded.
-.SH DESCRIPTION
-.B jack_unload
-is the counterpart to 
-.B jack_load
-and unloads the specified client.
-.SH EXAMPLE
-.B jack_unload in_process_test
-.SH AUTHOR
-Jeremy Hall
-.PP
-This manpage was written by Robert Jordens <jordens@debian.org> for Debian.
diff --git a/man/jack_wait.0 b/man/jack_wait.0
deleted file mode 100644
index 239e8c2..0000000
--- a/man/jack_wait.0
+++ /dev/null
@@ -1,41 +0,0 @@
-.TH JACK_WAIT "1" "!DATE!" "!VERSION!"
-.SH NAME
-jack_wait \- JACK toolkit client to check and wait for existence/exit of jackd.  
-.SH SYNOPSIS
-\fBjack_wait\fR [ \fI-s\fR | \fI--server\fR servername ] [ \fI-t\fR | \fI--timeout\fR timeout_seconds [ \fI-cqwhv\fR ]
-.SH DESCRIPTION
-\fBjack_wait\fR When invoked with \fI-c\fR it only checks for the existence of a jack server. When invoked with \fI-w\fR the
-program will wait for a jackd to be available.
-The \fI-q\fR makes it wait for the jackd to exit.
-
-.SH OPTIONS
-.TP
-\fB-w\fR, \fB--wait\fR
-.br
-Wait for jackd to be available.
-.TP
-\fB-q\fR, \fB--quit\fR
-.br
-Wait for jackd quit.
-.TP
-\fB-c\fR, \fB--check\fR
-.br
-Only check for existence of jackd, and exit.
-.TP
-\fB-s\fR, \fB--server\fR \fIservername\fR
-.br
-Connect to the jack server named \fIservername\fR
-.TP
-\fB-t\fR, \fB--timeout\fR \fItimeout_seconds\fR
-.br
-Only wait \fItimeout_seconds\fR.
-.TP
-\fB-h\fR, \fB--help\fR
-.br
-Display help/usage message
-.TP
-\fB-v\fR, \fB--version\fR
-.br
-Output version information and exit
-
-
diff --git a/man/jackrec.0 b/man/jackrec.0
deleted file mode 100644
index 1ea2a6f..0000000
--- a/man/jackrec.0
+++ /dev/null
@@ -1,23 +0,0 @@
-.TH JACKREC "1" "!DATE!" "!VERSION!"
-.SH NAME
-jackrec \- JACK toolkit client for recording audio
-.SH SYNOPSIS
-.B jackrec
-\-f filename \-d seconds [ \-b bitdepth ] port1 [ port2 ... ]
-.SH DESCRIPTION
-.B jackrec is a basic, but useful, audio recorder that will record
-audio from 1 or more JACK ports to a file on disk. The file format is
-always RIFF/WAV, with samples stored as signed integers. The sample
-bit depth can be selected using the \fI-b\fR option. The file will
-have as many channels as there are ports specified on the command line
-- each channel will contain the data recorded from one port. The user
-should generally specify the duration (in seconds) using the \fI-d\fR
-option. If not specified, jackrec will record until terminated by a
-signal (eg. from Ctrl-c).
-.PP
-This application is not intended to be a heavy duty audio recorder,
-and originated as an example client to show how to handle threading
-and disk I/O in a JACK client. However, it is a useful, simple
-recorder and is included in the JACK toolkit as a result.
-
-