summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* Add "factory_config" cmd to allow whole fabric or individual nodesv1.8.11-cx_2012.10.19Danny Nold2012-10-162-0/+23
* Add "actual" flag to get the real linkspeedKen Goss2012-10-052-3/+14
* Bump cx_version to "-cx2"George Kraft2012-10-041-1/+1
* IPMITOOL-22: Initialize zeroes to "info basic" response dataGeorge Kraft2012-10-041-10/+8
* SW-1697: Retrieve Board ID and Board RevisionDarrell Chieng2012-10-031-4/+44
* Add frequency specifier for set_watch commandKen Goss2012-09-262-1/+11
* Add "fabric set_watch" and fabric "clear_watch" commands (for stats)Ken Goss2012-09-262-7/+105
* Add MAC channel stats as fabric info choiceKen Goss2012-09-252-0/+11
* IPMITOOL-18: Add commands to set/retrieve hb_spif versionv1.8.11-cx_2012.09.21George Kraft2012-09-201-7/+47
* The 'mac' specifier needs to take a scalar valueKen Goss2012-09-111-2/+2
* cxoem fabric info command requires tftp and file specifiersKen Goss2012-09-111-1/+2
* Remove nodeid as permitted parameter for fabric info commandsKen Goss2012-09-111-2/+1
* Add ipmitool command for get info on the fabric (stats, topology, etc.)Ken Goss2012-09-112-2/+117
* cxoem: Add new SIMG version field to fw infoGeorge Kraft2012-08-282-0/+5
* cxoem: Rename the fw info "version" field to "priority"George Kraft2012-08-282-7/+7
* Change linkspeed from scalar to stringKen Goss2012-08-271-4/+10
* Replace references to "slot" with "partition" for FW commandsGeorge Kraft2012-08-161-81/+82
* Apply lindent.Danny Nold2012-08-052-1046/+1014
* Added "uplink" parameter. Format:Danny Nold2012-08-022-5/+22
* Add "override" specifier for linkspeeds, handle specifiers with no valuesKen Goss2012-07-282-23/+44
* Don't try to print if get response has zero lengthKen Goss2012-07-221-1/+2
* Fix printing of 'fabric config get' output, add linkspeed parameter handlingKen Goss2012-07-222-7/+40
* Don't be fooled if user uses a parameter name as part of an argumentKen Goss2012-07-161-1/+2
* Add hardware watchdog to feature enablement functionKen Goss2012-07-131-1/+3
* OEM Features: Enable/Disable/Status (SW-1591)Darrell Chieng2012-07-122-1/+94
* Allow mac_addr adds and removes to be handled by nodes other than 0Ken Goss2012-06-291-4/+2
* Allow up to 16 words of data to be fetched in a single cxoem memory read.bob.blair2012-06-261-3/+3
* For SW-1534: make fabric command output go to stdout vs. stderrKen Goss2012-06-251-4/+4
* Add Calxeda oem commandsbob.blair2012-06-183-21/+21
* SEL: Decode processor SEL message added by IPMI2 Errata 4Darrell Chieng2012-06-181-0/+2
* Add Calxeda oem commandsDarrell Chieng2012-06-182-32/+108
* lan.c: ignore responses to other commandsJason Hobbs2012-06-181-1/+10
* Add Calxeda oem commandsJon Loeliger2012-06-189-65/+117
* Add a .gitignore fileJon Loeliger2012-06-181-0/+33
* Add Calxeda oem commandsbob.blair2012-06-185-426/+1794
* ipmi_chassis: Replace numerical command ids with macrosDavid Schwarz2012-06-182-9/+23
* lan and user: Don't leak a session when changing own passwordDavid Schwarz2012-06-185-4/+68
* cxoem: add new fabric config commandsJim Roberts2012-06-183-6/+184
* user: Per IPMI spec, allow 16 character user namesDavid Schwarz2012-06-181-3/+3
* sel info: read max record size from correct offsetJoshua Housh2012-06-181-1/+1
* set user name: quit rather than segfault if the name is too longJoshua Housh2012-06-181-0/+5
* sel time set: fix a DST bugJoshua Housh2012-06-181-22/+16
* Add Calxeda oem commandsJim Roberts2012-06-184-39/+1054
* sel reserve: refactor so that 0 is not an invalid reservation idJoshua Housh2012-06-181-44/+39
* fan speed: fully initialize request before sendingJoshua Housh2012-06-181-0/+1
* sel add: fully initialize request before sendingJoshua Housh2012-06-181-0/+1
* Add Calxeda oem commandsJim Roberts2012-06-1813-13/+632
* Initial commit from a clean ipmitool-1.8.11 tarballJason Hobbs2011-11-08171-0/+120209
View Lorry Controller Status