summaryrefslogtreecommitdiff
path: root/compiler/codeGen/StgCmmCon.hs
Commit message (Collapse)AuthorAgeFilesLines
* Module hierarchy: StgToCmm (#13009)Sylvain Henry2019-09-101-285/+0
| | | | | | Add StgToCmm module hierarchy. Platform modules that are used in several other places (NCG, LLVM codegen, Cmm transformations) are put into GHC.Platform.
* Move 'Platform' to ghc-bootJohn Ericson2019-06-191-1/+1
| | | | | | | ghc-pkg needs to be aware of platforms so it can figure out which subdire within the user package db to use. This is admittedly roundabout, but maybe Cabal could use the same notion of a platform as GHC to good affect too.
* Comments onlySimon Peyton Jones2018-11-281-8/+6
|
* Rename literal constructorsSylvain Henry2018-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In a previous patch we replaced some built-in literal constructors (MachInt, MachWord, etc.) with a single LitNumber constructor. In this patch we replace the `Mach` prefix of the remaining constructors with `Lit` for consistency (e.g., LitChar, LitLabel, etc.). Sadly the name `LitString` was already taken for a kind of FastString and it would become misleading to have both `LitStr` (literal constructor renamed after `MachStr`) and `LitString` (FastString variant). Hence this patch renames the FastString variant `PtrString` (which is more accurate) and the literal string constructor now uses the least surprising `LitString` name. Both `Literal` and `LitString/PtrString` have recently seen breaking changes so doing this kind of renaming now shouldn't harm much. Reviewers: hvr, goldfire, bgamari, simonmar, jrtc27, tdammers Subscribers: tdammers, rwbarton, thomie, carter Differential Revision: https://phabricator.haskell.org/D4881
* Turn on MonadFail desugaring by defaultHerbert Valerio Riedel2018-08-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: This contains two commits: ---- Make GHC's code-base compatible w/ `MonadFail` There were a couple of use-sites which implicitly used pattern-matches in `do`-notation even though the underlying `Monad` didn't explicitly support `fail` This refactoring turns those use-sites into explicit case discrimations and adds an `MonadFail` instance for `UniqSM` (`UniqSM` was the worst offender so this has been postponed for a follow-up refactoring) --- Turn on MonadFail desugaring by default This finally implements the phase scheduled for GHC 8.6 according to https://prime.haskell.org/wiki/Libraries/Proposals/MonadFail#Transitionalstrategy This also preserves some tests that assumed MonadFail desugaring to be active; all ghc boot libs were already made compatible with this `MonadFail` long ago, so no changes were needed there. Test Plan: Locally performed ./validate --fast Reviewers: bgamari, simonmar, jrtc27, RyanGlScott Reviewed By: bgamari Subscribers: bgamari, RyanGlScott, rwbarton, thomie, carter Differential Revision: https://phabricator.haskell.org/D5028
* Built-in Natural literals in CoreSylvain Henry2018-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for built-in Natural literals in Core. - Replace MachInt,MachWord, LitInteger, etc. with a single LitNumber constructor with a LitNumType field - Support built-in Natural literals - Add desugar warning for negative literals - Move Maybe(..) from GHC.Base to GHC.Maybe for module dependency reasons This patch introduces only a few rules for Natural literals (compared to Integer's rules). Factorization of the built-in rules for numeric literals will be done in another patch as this one is already big to review. Test Plan: validate test build with integer-simple Reviewers: hvr, bgamari, goldfire, Bodigrim, simonmar Reviewed By: bgamari Subscribers: phadej, simonpj, RyanGlScott, carter, hsyl20, rwbarton, thomie GHC Trac Issues: #14170, #14465 Differential Revision: https://phabricator.haskell.org/D4212
* Fix interpreter with profilingSimon Marlow2018-03-061-2/+1
| | | | | | | | | | | | | | | | | | | This was broken by D3746 and/or D3809, but unfortunately we didn't notice because CI at the time wasn't building the profiling way. Test Plan: ``` cd testsuite/test/profiling/should_run make WAY=ghci-ext-prof ``` Reviewers: bgamari, michalt, hvr, erikd Subscribers: rwbarton, thomie, carter GHC Trac Issues: #14705 Differential Revision: https://phabricator.haskell.org/D4437
* Tidy up and consolidate canned CmmReg and CmmGlobalsSimon Marlow2018-02-181-2/+2
| | | | | | | | | | | | Test Plan: validate Reviewers: bgamari, erikd Reviewed By: bgamari Subscribers: rwbarton, thomie, carter Differential Revision: https://phabricator.haskell.org/D4380
* Allow packing constructor fieldsMichal Terepeta2017-10-291-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is another step for fixing #13825 and is based on D38 by Simon Marlow. The change allows storing multiple constructor fields within the same word. This currently applies only to `Float`s, e.g., ``` data Foo = Foo {-# UNPACK #-} !Float {-# UNPACK #-} !Float ``` on 64-bit arch, will now store both fields within the same constructor word. For `WordX/IntX` we'll need to introduce new primop types. Main changes: - We now use sizes in bytes when we compute the offsets for constructor fields in `StgCmmLayout` and introduce padding if necessary (word-sized fields are still word-aligned) - `ByteCodeGen` had to be updated to correctly construct the data types. This required some new bytecode instructions to allow pushing things that are not full words onto the stack (and updating `Interpreter.c`). Note that we only use the packed stuff when constructing data types (i.e., for `PACK`), in all other cases the behavior should not change. - `RtClosureInspect` was changed to handle the new layout when extracting subterms. This seems to be used by things like `:print`. I've also added a test for this. - I deviated slightly from Simon's approach and use `PrimRep` instead of `ArgRep` for computing the size of fields. This seemed more natural and in the future we'll probably want to introduce new primitive types (e.g., `Int8#`) and `PrimRep` seems like a better place to do that (where we already have `Int64Rep` for example). `ArgRep` on the other hand seems to be more focused on calling functions. Signed-off-by: Michal Terepeta <michal.terepeta@gmail.com> Test Plan: ./validate Reviewers: bgamari, simonmar, austin, hvr, goldfire, erikd Reviewed By: bgamari Subscribers: maoe, rwbarton, thomie GHC Trac Issues: #13825 Differential Revision: https://phabricator.haskell.org/D3809
* compiler: introduce custom "GhcPrelude" PreludeHerbert Valerio Riedel2017-09-191-0/+2
| | | | | | | | | | | | | | | | | | This switches the compiler/ component to get compiled with -XNoImplicitPrelude and a `import GhcPrelude` is inserted in all modules. This is motivated by the upcoming "Prelude" re-export of `Semigroup((<>))` which would cause lots of name clashes in every modulewhich imports also `Outputable` Reviewers: austin, goldfire, bgamari, alanz, simonmar Reviewed By: bgamari Subscribers: goldfire, rwbarton, thomie, mpickering, bgamari Differential Revision: https://phabricator.haskell.org/D3989
* Add support for producing position-independent executablesBen Gamari2017-08-221-2/+2
| | | | | | | | | | | | | | | | Previously due to #12759 we disabled PIE support entirely. However, this breaks the user's ability to produce PIEs. Add an explicit flag, -fPIE, allowing the user to build PIEs. Test Plan: Validate Reviewers: rwbarton, austin, simonmar Subscribers: trommler, simonmar, trofi, jrtc27, thomie GHC Trac Issues: #12759, #13702 Differential Revision: https://phabricator.haskell.org/D3589
* Tweaks and typos in manual, note refs, commentsGabor Greif2017-02-091-1/+1
|
* Codegen for case: Remove redundant void id checksÖmer Sinan Ağacan2016-09-201-8/+7
| | | | | | | | | | | | | | | | New unarise (714bebf) eliminates void binders in patterns already, so no need to eliminate them here. I leave assertions to make sure this is the case. Assertion failure -> bug in unarise Reviewers: bgamari, simonpj, austin, simonmar, hvr Reviewed By: simonpj Subscribers: thomie Differential Revision: https://phabricator.haskell.org/D2416
* Remove StgRubbishArg and CmmArgÖmer Sinan Ağacan2016-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idea behind adding special "rubbish" arguments was in unboxed sum types depending on the tag some arguments are not used and we don't want to move some special values (like 0 for literals and some special pointer for boxed slots) for those arguments (to stack locations or registers). "StgRubbishArg" was an indicator to the code generator that the value won't be used. During Stg-to-Cmm we were then not generating any move or store instructions at all. This caused problems in the register allocator because some variables were only initialized in some code paths. As an example, suppose we have this STG: (after unarise) Lib.$WT = \r [dt_sit] case case dt_sit of { Lib.F dt_siv [Occ=Once] -> (#,,#) [1# dt_siv StgRubbishArg::GHC.Prim.Int#]; Lib.I dt_siw [Occ=Once] -> (#,,#) [2# StgRubbishArg::GHC.Types.Any dt_siw]; } of dt_six { (#,,#) us_giC us_giD us_giE -> Lib.T [us_giC us_giD us_giE]; }; This basically unpacks a sum type to an unboxed sum with 3 fields, and then moves the unboxed sum to a constructor (`Lib.T`). This is the Cmm for the inner case expression (case expression in the scrutinee position of the outer case): ciN: ... -- look at dt_sit's tag if (_ciT::P64 != 1) goto ciS; else goto ciR; ciS: -- Tag is 2, i.e. Lib.F _siw::I64 = I64[_siu::P64 + 6]; _giE::I64 = _siw::I64; _giD::P64 = stg_RUBBISH_ENTRY_info; _giC::I64 = 2; goto ciU; ciR: -- Tag is 1, i.e. Lib.I _siv::P64 = P64[_siu::P64 + 7]; _giD::P64 = _siv::P64; _giC::I64 = 1; goto ciU; Here one of the blocks `ciS` and `ciR` is executed and then the execution continues to `ciR`, but only `ciS` initializes `_giE`, in the other branch `_giE` is not initialized, because it's "rubbish" in the STG and so we don't generate an assignment during code generator. The code generator then panics during the register allocations: ghc-stage1: panic! (the 'impossible' happened) (GHC version 8.1.20160722 for x86_64-unknown-linux): LocalReg's live-in to graph ciY {_giE::I64} (`_giD` is also "rubbish" in `ciS`, but it's still initialized because it's a pointer slot, we have to initialize it otherwise garbage collector follows the pointer to some random place. So we only remove assignment if the "rubbish" arg has unboxed type.) This patch removes `StgRubbishArg` and `CmmArg`. We now always initialize rubbish slots. If the slot is for boxed types we use the existing `absentError`, otherwise we initialize the slot with literal 0. Reviewers: simonpj, erikd, austin, simonmar, bgamari Reviewed By: erikd Subscribers: thomie Differential Revision: https://phabricator.haskell.org/D2446
* Implement unboxed sum primitive typeÖmer Sinan Ağacan2016-07-211-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: This patch implements primitive unboxed sum types, as described in https://ghc.haskell.org/trac/ghc/wiki/UnpackedSumTypes. Main changes are: - Add new syntax for unboxed sums types, terms and patterns. Hidden behind `-XUnboxedSums`. - Add unlifted unboxed sum type constructors and data constructors, extend type and pattern checkers and desugarer. - Add new RuntimeRep for unboxed sums. - Extend unarise pass to translate unboxed sums to unboxed tuples right before code generation. - Add `StgRubbishArg` to `StgArg`, and a new type `CmmArg` for better code generation when sum values are involved. - Add user manual section for unboxed sums. Some other changes: - Generalize `UbxTupleRep` to `MultiRep` and `UbxTupAlt` to `MultiValAlt` to be able to use those with both sums and tuples. - Don't use `tyConPrimRep` in `isVoidTy`: `tyConPrimRep` is really wrong, given an `Any` `TyCon`, there's no way to tell what its kind is, but `kindPrimRep` and in turn `tyConPrimRep` returns `PtrRep`. - Fix some bugs on the way: #12375. Not included in this patch: - Update Haddock for new the new unboxed sum syntax. - `TemplateHaskell` support is left as future work. For reviewers: - Front-end code is mostly trivial and adapted from unboxed tuple code for type checking, pattern checking, renaming, desugaring etc. - Main translation routines are in `RepType` and `UnariseStg`. Documentation in `UnariseStg` should be enough for understanding what's going on. Credits: - Johan Tibell wrote the initial front-end and interface file extensions. - Simon Peyton Jones reviewed this patch many times, wrote some code, and helped with debugging. Reviewers: bgamari, alanz, goldfire, RyanGlScott, simonpj, austin, simonmar, hvr, erikd Reviewed By: simonpj Subscribers: Iceland_jack, ggreif, ezyang, RyanGlScott, goldfire, thomie, mpickering Differential Revision: https://phabricator.haskell.org/D2259
* StgCmmCon: Do not generate moves from unused fields to local variablesÖmer Sinan Ağacan2016-05-271-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Say we have a record like this: data Rec = Rec { f1 :: Int , f2 :: Int , f3 :: Int , f4 :: Int , f5 :: Int } Before this patch, the code generated for `f1` looked like this: f1_entry() {offset ... cJT: _sI6::P64 = R1; _sI7::P64 = P64[_sI6::P64 + 7]; _sI8::P64 = P64[_sI6::P64 + 15]; _sI9::P64 = P64[_sI6::P64 + 23]; _sIa::P64 = P64[_sI6::P64 + 31]; _sIb::P64 = P64[_sI6::P64 + 39]; R1 = _sI7::P64 & (-8); Sp = Sp + 8; call (I64[R1])(R1) args: 8, res: 0, upd: 8; } Note how all fields of the record are moved to local variables, even though they're never used. These moves make it to the final assembly: f1_info: ... _cJT: movq 7(%rbx),%rax movq 15(%rbx),%rcx movq 23(%rbx),%rcx movq 31(%rbx),%rcx movq 39(%rbx),%rbx movq %rax,%rbx andq $-8,%rbx addq $8,%rbp jmp *(%rbx) With this patch we stop generating these move instructions. Cmm becomes this: f1_entry() {offset ... cJT: _sI6::P64 = R1; _sI7::P64 = P64[_sI6::P64 + 7]; R1 = _sI7::P64 & (-8); Sp = Sp + 8; call (I64[R1])(R1) args: 8, res: 0, upd: 8; } Assembly becomes this: f1_info: ... _cJT: movq 7(%rbx),%rax movq %rax,%rbx andq $-8,%rbx addq $8,%rbp jmp *(%rbx) It turns out CmmSink already optimizes this, but it's better to generate better code in the first place. Reviewers: simonmar, simonpj, austin, bgamari Reviewed By: simonmar, simonpj Subscribers: rwbarton, thomie Differential Revision: https://phabricator.haskell.org/D2269
* Rename package key to unit ID, and installed package ID to component ID.Edward Z. Yang2015-10-141-2/+2
| | | | | | Comes with Haddock submodule update. Signed-off-by: Edward Z. Yang <ezyang@cs.stanford.edu>
* Revert "Place static closures in their own section."Edward Z. Yang2014-10-201-1/+1
| | | | | | | | | | This reverts commit b23ba2a7d612c6b466521399b33fe9aacf5c4f75. Conflicts: compiler/cmm/PprCmmDecl.hs compiler/nativeGen/PPC/Ppr.hs compiler/nativeGen/SPARC/Ppr.hs compiler/nativeGen/X86/Ppr.hs
* Place static closures in their own section.Edward Z. Yang2014-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Summary: The primary reason for doing this is assisting debuggability: if static closures are all in the same section, they are guaranteed to be adjacent to one another. This will help later when we add some code that takes section start/end and uses this to sanity-check the sections. Part of remove HEAP_ALLOCED patch set (#8199) Signed-off-by: Edward Z. Yang <ezyang@mit.edu> Test Plan: validate Reviewers: simonmar, austin Subscribers: simonmar, ezyang, carter, thomie Differential Revision: https://phabricator.haskell.org/D263 GHC Trac Issues: #8199
* Rename PackageId to PackageKey, distinguishing it from Cabal's PackageId.Edward Z. Yang2014-07-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Previously, both Cabal and GHC defined the type PackageId, and we expected them to be roughly equivalent (but represented differently). This refactoring separates these two notions. A package ID is a user-visible identifier; it's the thing you write in a Cabal file, e.g. containers-0.9. The components of this ID are semantically meaningful, and decompose into a package name and a package vrsion. A package key is an opaque identifier used by GHC to generate linking symbols. Presently, it just consists of a package name and a package version, but pursuant to #9265 we are planning to extend it to record other information. Within a single executable, it uniquely identifies a package. It is *not* an InstalledPackageId, as the choice of a package key affects the ABI of a package (whereas an InstalledPackageId is computed after compilation.) Cabal computes a package key for the package and passes it to GHC using -package-name (now *extremely* misnamed). As an added bonus, we don't have to worry about shadowing anymore. As a follow on, we should introduce -current-package-key having the same role as -package-name, and deprecate the old flag. This commit is just renaming. The haddock submodule needed to be updated. Signed-off-by: Edward Z. Yang <ezyang@cs.stanford.edu> Test Plan: validate Reviewers: simonpj, simonmar, hvr, austin Subscribers: simonmar, relrod, carter Differential Revision: https://phabricator.haskell.org/D79 Conflicts: compiler/main/HscTypes.lhs compiler/main/Packages.lhs utils/haddock
* Add LANGUAGE pragmas to compiler/ source filesHerbert Valerio Riedel2014-05-151-0/+2
| | | | | | | | | | | | | | | | | | In some cases, the layout of the LANGUAGE/OPTIONS_GHC lines has been reorganized, while following the convention, to - place `{-# LANGUAGE #-}` pragmas at the top of the source file, before any `{-# OPTIONS_GHC #-}`-lines. - Moreover, if the list of language extensions fit into a single `{-# LANGUAGE ... -#}`-line (shorter than 80 characters), keep it on one line. Otherwise split into `{-# LANGUAGE ... -#}`-lines for each individual language extension. In both cases, try to keep the enumeration alphabetically ordered. (The latter layout is preferable as it's more diff-friendly) While at it, this also replaces obsolete `{-# OPTIONS ... #-}` pragma occurences by `{-# OPTIONS_GHC ... #-}` pragmas.
* Add SmallArray# and SmallMutableArray# typesJohan Tibell2014-03-291-2/+2
| | | | | | | | | | | | | | | These array types are smaller than Array# and MutableArray# and are faster when the array size is small, as they don't have the overhead of a card table. Having no card table reduces the closure size with 2 words in the typical small array case and leads to less work when updating or GC:ing the array. Reduces both the runtime and memory allocation by 8.8% on my insert benchmark for the HashMap type in the unordered-containers package, which makes use of lots of small arrays. With tuned GC settings (i.e. `+RTS -A6M`) the runtime reduction is 15%. Fixes #8923.
* Represent offsets into heap objects with byte, not word, offsetsSimon Marlow2014-03-111-0/+1
| | | | | I'd like to be able to pack together non-pointer fields that are less than a word in size, and this is a necessary prerequisite.
* Explicit import lists for StgCmmProf.Edward Z. Yang2013-09-011-1/+1
| | | | Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
* Cleanup StgCmm passJan Stolarek2013-08-201-8/+7
| | | | | | | | | | | | | | This cleanup includes: * removing dead code. This includes forkStatics function, which was in fact one big noop, and global bindings in CgInfoDownwards, * converting functions that used FCode monad only to access DynFlags into functions that take DynFlags as a parameter and don't work in a monad, * addBindC function is now smarter. It extracts Id from CgIdInfo passed to it in the same way addBindsC does. Previously this was done at every call site, which was redundant.
* Trailing whitespaces, code formatting, detabifyJan Stolarek2013-08-201-1/+1
| | | | | A major cleanup of trailing whitespaces and tabs in codeGen/ directory. I also adjusted code formatting in some places.
* Fix the GHC package DLL-splittingIan Lynagh2013-05-141-1/+2
| | | | | | | There's now an internal -dll-split flag, which we use to tell GHC how the GHC package is split into 2 separate DLLs. This is used by Packages.isDllName to determine whether a call is within the same DLL, or whether it is a call to another DLL.
* extended ticky to also track "let"s that are not conventional closuresNicolas Frisby2013-05-021-8/+13
| | | | | | | This includes selector, ap, and constructor thunks. They are still guarded by the -ticky-dyn-thk flag. (This is 024df664b600a with a small bug fix.)
* some more typosGabor Greif2013-02-021-1/+1
|
* Some alpha renamingIan Lynagh2012-10-161-2/+2
| | | | | Mostly d -> g (matching DynFlag -> GeneralFlag). Also renamed if* to when*, matching the Haskell if/when names
* Produce new-style Cmm from the Cmm parserSimon Marlow2012-10-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main change here is that the Cmm parser now allows high-level cmm code with argument-passing and function calls. For example: foo ( gcptr a, bits32 b ) { if (b > 0) { // we can make tail calls passing arguments: jump stg_ap_0_fast(a); } return (x,y); } More details on the new cmm syntax are in Note [Syntax of .cmm files] in CmmParse.y. The old syntax is still more-or-less supported for those occasional code fragments that really need to explicitly manipulate the stack. However there are a couple of differences: it is now obligatory to give a list of live GlobalRegs on every jump, e.g. jump %ENTRY_CODE(Sp(0)) [R1]; Again, more details in Note [Syntax of .cmm files]. I have rewritten most of the .cmm files in the RTS into the new syntax, except for AutoApply.cmm which is generated by the genapply program: this file could be generated in the new syntax instead and would probably be better off for it, but I ran out of enthusiasm. Some other changes in this batch: - The PrimOp calling convention is gone, primops now use the ordinary NativeNodeCall convention. This means that primops and "foreign import prim" code must be written in high-level cmm, but they can now take more than 10 arguments. - CmmSink now does constant-folding (should fix #7219) - .cmm files now go through the cmmPipeline, and as a result we generate better code in many cases. All the object files generated for the RTS .cmm files are now smaller. Performance should be better too, but I haven't measured it yet. - RET_DYN frames are removed from the RTS, lots of code goes away - we now have some more canned GC points to cover unboxed-tuples with 2-4 pointers, which will reduce code size a little.
* Move tAG_BITS into platformConstantsIan Lynagh2012-09-161-10/+8
|
* Move wORD_SIZE into platformConstantsIan Lynagh2012-09-161-2/+2
|
* Move some more constants fo platformConstantsIan Lynagh2012-09-141-7/+6
|
* Pass DynFlags down to bWordIan Lynagh2012-09-121-9/+10
| | | | | | I've switched to passing DynFlags rather than Platform, as (a) it's simpler to not have to extract targetPlatform in so many places, and (b) it may be useful to have DynFlags around in future.
* Remove uses of fixC from the codeGen, and make the FCode monad strictSimon Marlow2012-08-091-30/+41
|
* Generate one fewer temps per heap allocationSimon Marlow2012-08-071-2/+2
| | | | | This saves compile time and can make a big difference in some pathological cases (T4801)
* Make -fscc-profiling a dynamic flagIan Lynagh2012-07-241-10/+11
| | | | All the flags that 'ways' imply are now dynamic
* Make -fPIC a dynamic flagIan Lynagh2012-07-161-9/+9
| | | | | | Hopefully I've kept the logic the same, and we now generate warnings if the user does -fno-PIC but we ignore them (e.g. because they're on OS X amd64).
* remove some redundant SRT-related stuffSimon Marlow2012-07-111-1/+0
|
* Merge remote-tracking branch 'origin/master' into newcgSimon Marlow2012-07-041-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * origin/master: (756 commits) don't crash if argv[0] == NULL (#7037) -package P was loading all versions of P in GHCi (#7030) Add a Note, copying text from #2437 improve the --help docs a bit (#7008) Copy Data.HashTable's hashString into our Util module Build fix Build fixes Parse error: suggest brackets and indentation. Don't build the ghc DLL on Windows; works around trac #5987 On Windows, detect if DLLs have too many symbols; trac #5987 Add some more Integer rules; fixes #6111 Fix PA dfun construction with silent superclass args Add silent superclass parameters to the vectoriser Add silent superclass parameters (again) Mention Generic1 in the user's guide Make the GHC API a little more powerful. tweak llvm version warning message New version of the patch for #5461. Fix Word64ToInteger conversion rule. Implemented feature request on reconfigurable pretty-printing in GHCi (#5461) ... Conflicts: compiler/basicTypes/UniqSupply.lhs compiler/cmm/CmmBuildInfoTables.hs compiler/cmm/CmmLint.hs compiler/cmm/CmmOpt.hs compiler/cmm/CmmPipeline.hs compiler/cmm/CmmStackLayout.hs compiler/cmm/MkGraph.hs compiler/cmm/OldPprCmm.hs compiler/codeGen/CodeGen.lhs compiler/codeGen/StgCmm.hs compiler/codeGen/StgCmmBind.hs compiler/codeGen/StgCmmLayout.hs compiler/codeGen/StgCmmUtils.hs compiler/main/CodeOutput.lhs compiler/main/HscMain.hs compiler/nativeGen/AsmCodeGen.lhs compiler/simplStg/SimplStg.lhs
| * Merge remote-tracking branch 'origin/unboxed-tuple-arguments2'Paolo Capriotti2012-06-051-1/+1
| |\
| | * Support code generation for unboxed-tuple function argumentsunboxed-tuple-arguments2Max Bolingbroke2012-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is done by a 'unarisation' pre-pass at the STG level which translates away all (live) binders binding something of unboxed tuple type. This has the following knock-on effects: * The subkind hierarchy is vastly simplified (no UbxTupleKind or ArgKind) * Various relaxed type checks in typechecker, 'foreign import prim' etc * All case binders may be live at the Core level
| * | Change how macros like ASSERT are definedIan Lynagh2012-06-051-1/+1
| |/ | | | | | | | | By using Haskell's debugIsOn rather than CPP's "#ifdef DEBUG", we don't need to kludge things to keep the warning checker happy etc.
* | Fix an SRT-related bugSimon Marlow2012-02-141-0/+1
|/ | | | | | | | We were using the SRT information generated by the computeSRTs pass to decide whether to add a static link field to a constructor or not, and this broke when I disabled computeSRTs for the new code generator. So I've hacked it for now to only rely on the SRT information generated by CoreToStg.
* Overhaul of infrastructure for profiling, coverage (HPC) and breakpointsSimon Marlow2011-11-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | User visible changes ==================== Profilng -------- Flags renamed (the old ones are still accepted for now): OLD NEW --------- ------------ -auto-all -fprof-auto -auto -fprof-exported -caf-all -fprof-cafs New flags: -fprof-auto Annotates all bindings (not just top-level ones) with SCCs -fprof-top Annotates just top-level bindings with SCCs -fprof-exported Annotates just exported bindings with SCCs -fprof-no-count-entries Do not maintain entry counts when profiling (can make profiled code go faster; useful with heap profiling where entry counts are not used) Cost-centre stacks have a new semantics, which should in most cases result in more useful and intuitive profiles. If you find this not to be the case, please let me know. This is the area where I have been experimenting most, and the current solution is probably not the final version, however it does address all the outstanding bugs and seems to be better than GHC 7.2. Stack traces ------------ +RTS -xc now gives more information. If the exception originates from a CAF (as is common, because GHC tends to lift exceptions out to the top-level), then the RTS walks up the stack and reports the stack in the enclosing update frame(s). Result: +RTS -xc is much more useful now - but you still have to compile for profiling to get it. I've played around a little with adding 'head []' to GHC itself, and +RTS -xc does pinpoint the problem quite accurately. I plan to add more facilities for stack tracing (e.g. in GHCi) in the future. Coverage (HPC) -------------- * derived instances are now coloured yellow if they weren't used * likewise record field names * entry counts are more accurate (hpc --fun-entry-count) * tab width is now correct (markup was previously off in source with tabs) Internal changes ================ In Core, the Note constructor has been replaced by Tick (Tickish b) (Expr b) which is used to represent all the kinds of source annotation we support: profiling SCCs, HPC ticks, and GHCi breakpoints. Depending on the properties of the Tickish, different transformations apply to Tick. See CoreUtils.mkTick for details. Tickets ======= This commit closes the following tickets, test cases to follow: - Close #2552: not a bug, but the behaviour is now more intuitive (test is T2552) - Close #680 (test is T680) - Close #1531 (test is result001) - Close #949 (test is T949) - Close #2466: test case has bitrotted (doesn't compile against current version of vector-space package)
* Remove a little more CPPIan Lynagh2011-10-151-4/+2
|
* Remove CPP from codeGen/StgCmmCon.hsIan Lynagh2011-10-141-21/+29
|
* Whitespace only in codeGen/StgCmmCon.hsIan Lynagh2011-10-141-62/+60
|
* eliminate ConInfoSimon Marlow2011-08-251-3/+4
|
View Lorry Controller Status