summaryrefslogtreecommitdiff
path: root/sha1-lookup.c
diff options
context:
space:
mode:
authorJeff King <peff@peff.net>2017-08-09 06:14:32 -0400
committerJunio C Hamano <gitster@pobox.com>2017-08-09 11:03:35 -0700
commitf1068efefe6dd3beaa89484db5e2db730b094e0b (patch)
tree2665e8c256371efc086ac9c52d4a76477204d73e /sha1-lookup.c
parent95d67879735cfecfdd85f89e59d993c5b4de8835 (diff)
downloadgit-f1068efefe6dd3beaa89484db5e2db730b094e0b.tar.gz
sha1_file: drop experimental GIT_USE_LOOKUP search
Long ago in 628522ec14 (sha1-lookup: more memory efficient search in sorted list of SHA-1, 2007-12-29) we added sha1_entry_pos(), a binary search that uses the uniform distribution of sha1s to scale the selection of mid-points. As this was a performance experiment, we tied it to the GIT_USE_LOOKUP environment variable and never enabled it by default. This code was successful in reducing the number of steps in each search. But the overhead of the scaling ends up making it slower when the cache is warm. Here are best-of-five timings for running rev-list on linux.git, which will have to look up every object: $ time git rev-list --objects --all >/dev/null real 0m35.357s user 0m35.016s sys 0m0.340s $ time GIT_USE_LOOKUP=1 git rev-list --objects --all >/dev/null real 0m37.364s user 0m37.045s sys 0m0.316s The USE_LOOKUP version might have more benefit on a cold cache, as the time to fault in each page would dominate. But that would be for a single lookup. In practice, most operations tend to look up many objects, and the whole pack .idx will end up warm. It's possible that the code could be better optimized to compete with a naive binary search for the warm-cache case, and we could have the best of both worlds. But over the years nobody has done so, and this is largely dead code that is rarely run outside of the test suite. Let's drop it in the name of simplicity. This lets us remove sha1_entry_pos() entirely, as the .idx lookup code was the only caller. Note that sha1-lookup.c still contains sha1_pos(), which differs from sha1_entry_pos() in two ways: - it has a different interface; it uses a function pointer to access sha1 entries rather than a size/offset pair describing the table's memory layout - it only scales the initial selection of "mi", rather than each iteration of the search We can't get rid of this function, as it's called from several places. It may be that we could replace it with a simple binary search, but that's out of scope for this patch (and would need benchmarking). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diffstat (limited to 'sha1-lookup.c')
-rw-r--r--sha1-lookup.c216
1 files changed, 0 insertions, 216 deletions
diff --git a/sha1-lookup.c b/sha1-lookup.c
index 5f069214d9..2552b7902c 100644
--- a/sha1-lookup.c
+++ b/sha1-lookup.c
@@ -99,219 +99,3 @@ int sha1_pos(const unsigned char *sha1, void *table, size_t nr,
} while (lo < hi);
return -lo-1;
}
-
-/*
- * Conventional binary search loop looks like this:
- *
- * unsigned lo, hi;
- * do {
- * unsigned mi = (lo + hi) / 2;
- * int cmp = "entry pointed at by mi" minus "target";
- * if (!cmp)
- * return (mi is the wanted one)
- * if (cmp > 0)
- * hi = mi; "mi is larger than target"
- * else
- * lo = mi+1; "mi is smaller than target"
- * } while (lo < hi);
- *
- * The invariants are:
- *
- * - When entering the loop, lo points at a slot that is never
- * above the target (it could be at the target), hi points at a
- * slot that is guaranteed to be above the target (it can never
- * be at the target).
- *
- * - We find a point 'mi' between lo and hi (mi could be the same
- * as lo, but never can be as same as hi), and check if it hits
- * the target. There are three cases:
- *
- * - if it is a hit, we are happy.
- *
- * - if it is strictly higher than the target, we set it to hi,
- * and repeat the search.
- *
- * - if it is strictly lower than the target, we update lo to
- * one slot after it, because we allow lo to be at the target.
- *
- * If the loop exits, there is no matching entry.
- *
- * When choosing 'mi', we do not have to take the "middle" but
- * anywhere in between lo and hi, as long as lo <= mi < hi is
- * satisfied. When we somehow know that the distance between the
- * target and lo is much shorter than the target and hi, we could
- * pick mi that is much closer to lo than the midway.
- *
- * Now, we can take advantage of the fact that SHA-1 is a good hash
- * function, and as long as there are enough entries in the table, we
- * can expect uniform distribution. An entry that begins with for
- * example "deadbeef..." is much likely to appear much later than in
- * the midway of the table. It can reasonably be expected to be near
- * 87% (222/256) from the top of the table.
- *
- * However, we do not want to pick "mi" too precisely. If the entry at
- * the 87% in the above example turns out to be higher than the target
- * we are looking for, we would end up narrowing the search space down
- * only by 13%, instead of 50% we would get if we did a simple binary
- * search. So we would want to hedge our bets by being less aggressive.
- *
- * The table at "table" holds at least "nr" entries of "elem_size"
- * bytes each. Each entry has the SHA-1 key at "key_offset". The
- * table is sorted by the SHA-1 key of the entries. The caller wants
- * to find the entry with "key", and knows that the entry at "lo" is
- * not higher than the entry it is looking for, and that the entry at
- * "hi" is higher than the entry it is looking for.
- */
-int sha1_entry_pos(const void *table,
- size_t elem_size,
- size_t key_offset,
- unsigned lo, unsigned hi, unsigned nr,
- const unsigned char *key)
-{
- const unsigned char *base = table;
- const unsigned char *hi_key, *lo_key;
- unsigned ofs_0;
- static int debug_lookup = -1;
-
- if (debug_lookup < 0)
- debug_lookup = !!getenv("GIT_DEBUG_LOOKUP");
-
- if (!nr || lo >= hi)
- return -1;
-
- if (nr == hi)
- hi_key = NULL;
- else
- hi_key = base + elem_size * hi + key_offset;
- lo_key = base + elem_size * lo + key_offset;
-
- ofs_0 = 0;
- do {
- int cmp;
- unsigned ofs, mi, range;
- unsigned lov, hiv, kyv;
- const unsigned char *mi_key;
-
- range = hi - lo;
- if (hi_key) {
- for (ofs = ofs_0; ofs < 20; ofs++)
- if (lo_key[ofs] != hi_key[ofs])
- break;
- ofs_0 = ofs;
- /*
- * byte 0 thru (ofs-1) are the same between
- * lo and hi; ofs is the first byte that is
- * different.
- *
- * If ofs==20, then no bytes are different,
- * meaning we have entries with duplicate
- * keys. We know that we are in a solid run
- * of this entry (because the entries are
- * sorted, and our lo and hi are the same,
- * there can be nothing but this single key
- * in between). So we can stop the search.
- * Either one of these entries is it (and
- * we do not care which), or we do not have
- * it.
- *
- * Furthermore, we know that one of our
- * endpoints must be the edge of the run of
- * duplicates. For example, given this
- * sequence:
- *
- * idx 0 1 2 3 4 5
- * key A C C C C D
- *
- * If we are searching for "B", we might
- * hit the duplicate run at lo=1, hi=3
- * (e.g., by first mi=3, then mi=0). But we
- * can never have lo > 1, because B < C.
- * That is, if our key is less than the
- * run, we know that "lo" is the edge, but
- * we can say nothing of "hi". Similarly,
- * if our key is greater than the run, we
- * know that "hi" is the edge, but we can
- * say nothing of "lo".
- *
- * Therefore if we do not find it, we also
- * know where it would go if it did exist:
- * just on the far side of the edge that we
- * know about.
- */
- if (ofs == 20) {
- mi = lo;
- mi_key = base + elem_size * mi + key_offset;
- cmp = memcmp(mi_key, key, 20);
- if (!cmp)
- return mi;
- if (cmp < 0)
- return -1 - hi;
- else
- return -1 - lo;
- }
-
- hiv = hi_key[ofs_0];
- if (ofs_0 < 19)
- hiv = (hiv << 8) | hi_key[ofs_0+1];
- } else {
- hiv = 256;
- if (ofs_0 < 19)
- hiv <<= 8;
- }
- lov = lo_key[ofs_0];
- kyv = key[ofs_0];
- if (ofs_0 < 19) {
- lov = (lov << 8) | lo_key[ofs_0+1];
- kyv = (kyv << 8) | key[ofs_0+1];
- }
- assert(lov < hiv);
-
- if (kyv < lov)
- return -1 - lo;
- if (hiv < kyv)
- return -1 - hi;
-
- /*
- * Even if we know the target is much closer to 'hi'
- * than 'lo', if we pick too precisely and overshoot
- * (e.g. when we know 'mi' is closer to 'hi' than to
- * 'lo', pick 'mi' that is higher than the target), we
- * end up narrowing the search space by a smaller
- * amount (i.e. the distance between 'mi' and 'hi')
- * than what we would have (i.e. about half of 'lo'
- * and 'hi'). Hedge our bets to pick 'mi' less
- * aggressively, i.e. make 'mi' a bit closer to the
- * middle than we would otherwise pick.
- */
- kyv = (kyv * 6 + lov + hiv) / 8;
- if (lov < hiv - 1) {
- if (kyv == lov)
- kyv++;
- else if (kyv == hiv)
- kyv--;
- }
- mi = (range - 1) * (kyv - lov) / (hiv - lov) + lo;
-
- if (debug_lookup) {
- printf("lo %u hi %u rg %u mi %u ", lo, hi, range, mi);
- printf("ofs %u lov %x, hiv %x, kyv %x\n",
- ofs_0, lov, hiv, kyv);
- }
- if (!(lo <= mi && mi < hi))
- die("assertion failure lo %u mi %u hi %u %s",
- lo, mi, hi, sha1_to_hex(key));
-
- mi_key = base + elem_size * mi + key_offset;
- cmp = memcmp(mi_key + ofs_0, key + ofs_0, 20 - ofs_0);
- if (!cmp)
- return mi;
- if (cmp > 0) {
- hi = mi;
- hi_key = mi_key;
- } else {
- lo = mi + 1;
- lo_key = mi_key + elem_size;
- }
- } while (lo < hi);
- return -lo-1;
-}