* reload.c: PROTO -> PARAMS.

        * reload.h: Likewise.
        * reload1.c: Likewise.
        * reorg.c: Likewise.
        * resource.h: Likewise.
        * rtl.c: Likewise.
        * rtl.h: Likewise.
        * rtlanal.c: Likewise.
        * sbitmap.h: Likewise.
        * sdbout.c: Likewise.
        * stack.h: Likewise.
        * stmt.c: Likewise.
        * system.h: Likewise.


git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@31461 138bc75d-0d04-0410-961f-82ee72b054a4

1 files changed, 34 insertions, 34 deletions

diff --git a/gcc/reload.h b/gcc/reload.h
index ebfdbc5f9d1..dcf51190abe 100644
--- a/gcc/reload.h
+++ b/gcc/reload.h
@@ -43,7 +43,7 @@ Boston, MA 02111-1307, USA.  */
 #define MEMORY_MOVE_COST(MODE,CLASS,IN) 4
 #endif
 #endif
-extern int memory_move_secondary_cost PROTO ((enum machine_mode, enum reg_class, int));
+extern int memory_move_secondary_cost PARAMS ((enum machine_mode, enum reg_class, int));
 
 /* Maximum number of reloads we can need.  */
 #define MAX_RELOADS (2 * MAX_RECOG_OPERANDS * (MAX_REGS_PER_ADDRESS + 1))
@@ -254,9 +254,9 @@ struct insn_chain
 extern struct insn_chain *reload_insn_chain;
 
 /* Allocate a new insn_chain structure.  */
-extern struct insn_chain *new_insn_chain	PROTO((void));
+extern struct insn_chain *new_insn_chain	PARAMS ((void));
 
-extern void compute_use_by_pseudos		PROTO((HARD_REG_SET *, regset));
+extern void compute_use_by_pseudos		PARAMS ((HARD_REG_SET *, regset));
 #endif
 
 /* Functions from reload.c:  */
@@ -264,121 +264,121 @@ extern void compute_use_by_pseudos		PROTO((HARD_REG_SET *, regset));
 /* Return a memory location that will be used to copy X in mode MODE.  
    If we haven't already made a location for this mode in this insn,
    call find_reloads_address on the location being returned.  */
-extern rtx get_secondary_mem PROTO((rtx, enum machine_mode,
+extern rtx get_secondary_mem PARAMS ((rtx, enum machine_mode,
 				    int, enum reload_type));
 
 /* Clear any secondary memory locations we've made.  */
-extern void clear_secondary_mem PROTO((void));
+extern void clear_secondary_mem PARAMS ((void));
 
 /* Transfer all replacements that used to be in reload FROM to be in
    reload TO.  */
-extern void transfer_replacements PROTO((int, int));
+extern void transfer_replacements PARAMS ((int, int));
 
 /* IN_RTX is the value loaded by a reload that we now decided to inherit,
    or a subpart of it.  If we have any replacements registered for IN_RTX,
    chancel the reloads that were supposed to load them.
    Return non-zero if we chanceled any reloads.  */
-extern int remove_address_replacements PROTO((rtx in_rtx));
+extern int remove_address_replacements PARAMS ((rtx in_rtx));
 
 /* Like rtx_equal_p except that it allows a REG and a SUBREG to match
    if they are the same hard reg, and has special hacks for
    autoincrement and autodecrement.  */
-extern int operands_match_p PROTO((rtx, rtx));
+extern int operands_match_p PARAMS ((rtx, rtx));
 
 /* Return 1 if altering OP will not modify the value of CLOBBER. */
-extern int safe_from_earlyclobber PROTO((rtx, rtx));
+extern int safe_from_earlyclobber PARAMS ((rtx, rtx));
 
 /* Search the body of INSN for values that need reloading and record them
    with push_reload.  REPLACE nonzero means record also where the values occur
    so that subst_reloads can be used.  */
-extern int find_reloads PROTO((rtx, int, int, int, short *));
+extern int find_reloads PARAMS ((rtx, int, int, int, short *));
 
 /* Compute the sum of X and Y, making canonicalizations assumed in an
    address, namely: sum constant integers, surround the sum of two
    constants with a CONST, put the constant as the second operand, and
    group the constant on the outermost sum.  */
-extern rtx form_sum PROTO((rtx, rtx));
+extern rtx form_sum PARAMS ((rtx, rtx));
 
 /* Substitute into the current INSN the registers into which we have reloaded
    the things that need reloading.  */
-extern void subst_reloads PROTO((void));
+extern void subst_reloads PARAMS ((void));
 
 /* Make a copy of any replacements being done into X and move those copies
    to locations in Y, a copy of X.  We only look at the highest level of
    the RTL.  */
-extern void copy_replacements PROTO((rtx, rtx));
+extern void copy_replacements PARAMS ((rtx, rtx));
 
 /* Change any replacements being done to *X to be done to *Y */
-extern void move_replacements PROTO((rtx *x, rtx *y));
+extern void move_replacements PARAMS ((rtx *x, rtx *y));
 
 /* If LOC was scheduled to be replaced by something, return the replacement.
    Otherwise, return *LOC.  */
-extern rtx find_replacement PROTO((rtx *));
+extern rtx find_replacement PARAMS ((rtx *));
 
 /* Return nonzero if register in range [REGNO, ENDREGNO)
    appears either explicitly or implicitly in X
    other than being stored into.  */
-extern int refers_to_regno_for_reload_p PROTO((int, int, rtx, rtx *));
+extern int refers_to_regno_for_reload_p PARAMS ((int, int, rtx, rtx *));
 
 /* Nonzero if modifying X will affect IN.  */
-extern int reg_overlap_mentioned_for_reload_p PROTO((rtx, rtx));
+extern int reg_overlap_mentioned_for_reload_p PARAMS ((rtx, rtx));
 
 /* Return nonzero if anything in X contains a MEM.  Look also for pseudo
    registers.  */
-extern int refers_to_mem_for_reload_p PROTO((rtx));
+extern int refers_to_mem_for_reload_p PARAMS ((rtx));
 
 /* Check the insns before INSN to see if there is a suitable register
    containing the same value as GOAL.  */
-extern rtx find_equiv_reg PROTO((rtx, rtx, enum reg_class, int, short *,
+extern rtx find_equiv_reg PARAMS ((rtx, rtx, enum reg_class, int, short *,
 				 int, enum machine_mode));
 
 /* Return 1 if register REGNO is the subject of a clobber in insn INSN.  */
-extern int regno_clobbered_p PROTO((int, rtx));
+extern int regno_clobbered_p PARAMS ((int, rtx));
 
 /* Return 1 if X is an operand of an insn that is being earlyclobbered.  */
-int earlyclobber_operand_p PROTO((rtx));
+int earlyclobber_operand_p PARAMS ((rtx));
 
 /* Functions in reload1.c:  */
 
-extern int reloads_conflict		PROTO ((int, int));
+extern int reloads_conflict		PARAMS ((int, int));
 
-int count_occurrences            PROTO((rtx, rtx));
+int count_occurrences            PARAMS ((rtx, rtx));
 
 /* Initialize the reload pass once per compilation.  */
-extern void init_reload PROTO((void));
+extern void init_reload PARAMS ((void));
 
 /* The reload pass itself.  */
-extern int reload PROTO((rtx, int, FILE *));
+extern int reload PARAMS ((rtx, int, FILE *));
 
 /* Mark the slots in regs_ever_live for the hard regs
    used by pseudo-reg number REGNO.  */
-extern void mark_home_live PROTO((int));
+extern void mark_home_live PARAMS ((int));
 
 /* Scan X and replace any eliminable registers (such as fp) with a
    replacement (such as sp), plus an offset.  */
-extern rtx eliminate_regs PROTO((rtx, enum machine_mode, rtx));
+extern rtx eliminate_regs PARAMS ((rtx, enum machine_mode, rtx));
 
 /* Emit code to perform a reload from IN (which may be a reload register) to
    OUT (which may also be a reload register).  IN or OUT is from operand
    OPNUM with reload type TYPE.  */
-extern rtx gen_reload PROTO((rtx, rtx, int, enum reload_type));
+extern rtx gen_reload PARAMS ((rtx, rtx, int, enum reload_type));
 
 /* Deallocate the reload register used by reload number R.  */
-extern void deallocate_reload_reg PROTO((int r));
+extern void deallocate_reload_reg PARAMS ((int r));
 
 /* Functions in caller-save.c:  */
 
 /* Initialize for caller-save.  */
-extern void init_caller_save PROTO((void));
+extern void init_caller_save PARAMS ((void));
 
 /* Initialize save areas by showing that we haven't allocated any yet.  */
-extern void init_save_areas PROTO((void));
+extern void init_save_areas PARAMS ((void));
 
 /* Allocate save areas for any hard registers that might need saving.  */
-extern void setup_save_areas PROTO((void));
+extern void setup_save_areas PARAMS ((void));
 
 /* Find the places where hard regs are live across calls and save them.  */
-extern void save_call_clobbered_regs PROTO((void));
+extern void save_call_clobbered_regs PARAMS ((void));
 
 /* Replace (subreg (reg)) with the appropriate (reg) for any operands.  */
-extern void cleanup_subreg_operands PROTO ((rtx));
+extern void cleanup_subreg_operands PARAMS ((rtx));